NetBSD/sys/arch/prep/prep/autoconf.c

136 lines
4.1 KiB
C

/* $NetBSD: autoconf.c,v 1.4 2000/06/02 22:09:02 cgd Exp $ */
/*-
* Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* William Jolitz.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)autoconf.c 7.1 (Berkeley) 5/9/91
*/
/*
* Setup the system to run on the current machine.
*
* Configure() is called at boot time and initializes the vba
* device tables and the memory controller monitoring. Available
* devices are determined (from possibilities mentioned in ioconf.c),
* and the drivers are initialized.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/buf.h>
#include <sys/dkstat.h>
#include <sys/disklabel.h>
#include <sys/conf.h>
#include <sys/reboot.h>
#include <sys/device.h>
#include <machine/pte.h>
#include <machine/intr.h>
struct device *booted_device;
int booted_partition;
static void findroot __P((void));
/*
* Determine i/o configuration for a machine.
*/
void
cpu_configure()
{
/* startrtclock(); */
if (config_rootfound("mainbus", NULL) == NULL)
panic("configure: mainbus not configured");
printf("biomask %x netmask %x ttymask %x\n",
(u_short)imask[IPL_BIO], (u_short)imask[IPL_NET],
(u_short)imask[IPL_TTY]);
spl0();
}
void
cpu_rootconf()
{
findroot();
printf("boot device: %s\n",
booted_device ? booted_device->dv_xname : "<unknown>");
setroot(booted_device, booted_partition);
}
u_long bootdev = 0; /* should be dev_t, but not until 32 bits */
/*
* Attempt to find the device from which we were booted.
* If we can do so, and not instructed not to do so,
* change rootdev to correspond to the load device.
*/
void
findroot(void)
{
int i, majdev, unit, part;
struct device *dv;
char buf[32];
#if 0
printf("howto %x bootdev %x ", boothowto, bootdev);
#endif
if ((bootdev & B_MAGICMASK) != (u_long)B_DEVMAGIC)
return;
majdev = (bootdev >> B_TYPESHIFT) & B_TYPEMASK;
for (i = 0; dev_name2blk[i].d_name != NULL; i++)
if (majdev == dev_name2blk[i].d_maj)
break;
if (dev_name2blk[i].d_name == NULL)
return;
part = (bootdev >> B_PARTITIONSHIFT) & B_PARTITIONMASK;
unit = (bootdev >> B_UNITSHIFT) & B_UNITMASK;
sprintf(buf, "%s%d", dev_name2blk[i].d_name, unit);
for (dv = alldevs.tqh_first; dv != NULL;
dv = dv->dv_list.tqe_next) {
if (strcmp(buf, dv->dv_xname) == 0) {
booted_device = dv;
booted_partition = part;
return;
}
}
}