NetBSD/sys/arch/arm32/podulebus/rapide.c

349 lines
11 KiB
C

/* $NetBSD: rapide.c,v 1.10 1998/10/12 16:09:11 bouyer Exp $ */
/*
* Copyright (c) 1997-1998 Mark Brinicombe
* Copyright (c) 1997-1998 Causality Limited
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Mark Brinicombe
* for the NetBSD Project.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Card driver and probe and attach functions to use generic IDE driver
* for the RapIDE podule
*/
/*
* Thanks to Chris Honey at Raymond Datalink for providing information on
* addressing the RapIDE podule.
* RapIDE32 is Copyright (C) 1995,1996 Raymond Datalink. RapIDE32 is
* manufactured under license by Yellowstone Educational Solutions.
*/
/*
* At present this driver only supports the Issue 2 RapIDE podule.
*/
/*
* A small amount of work is required for Issue 1 podule support.
* The primary differences are the register addresses.
* Things are eased by the fact that we can identify the card by register
* the same register on both issues of the podule.
* Once we kmnow the issue we must change all our addresses accordingly.
* All the control registers are mapped the same between cards.
* The interrupt handler needs to take note that the issue 1 card needs
* the interrupt to be cleared via the interrupt clear register.
* This means we share addresses for the mapping of the control block and
* thus the card driver does not need to know about the differences.
* The differences show up a the controller level.
* A structure is used to hold the information about the addressing etc.
* An array of these structures holds the information for the primary and
* secondary connectors. This needs to be extended to hold this information
* for both issues. Then the indexing of this structures will utilise the
* card version number.
*
* Opps just noticed a mistake. The interrupt request register is different
* between cards so the card level attach routine will need to consider this.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/conf.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <machine/irqhandler.h>
#include <machine/io.h>
#include <machine/bus.h>
#include <machine/bootconfig.h>
#include <arm32/iomd/iomdreg.h>
#include <arm32/podulebus/podulebus.h>
#include <arm32/podulebus/podules.h>
#include <arm32/podulebus/rapidereg.h>
#include <dev/ata/atavar.h>
#include <dev/ic/wdcvar.h>
/*
* RapIDE podule device.
*
* This probes and attaches the top level RapIDE device to the podulebus.
* It then configures any children of the RapIDE device.
* The attach args specify whether it is configuring the primary or
* secondary channel.
* The children are expected to be wdc devices using rapide attachments.
*/
/*
* RapIDE card softc structure.
*
* Contains the device node, podule information and global information
* required by the driver such as the card version and the interrupt mask.
*/
struct rapide_softc {
struct wdc_softc sc_wdcdev; /* common wdc definitions */
struct channel_softc wdc_channel[2]; /* channels definition */
podule_t *sc_podule; /* Our podule info */
int sc_podule_number; /* Our podule number */
int sc_intr_enable_mask; /* Global intr mask */
int sc_version; /* Card version */
bus_space_tag_t sc_ctliot; /* Bus tag */
bus_space_handle_t sc_ctlioh; /* control handler */
struct rapide_channel {
irqhandler_t rc_ih; /* interrupt handler */
int rc_irqmask; /* IRQ mask for this channel */
} rapide_channels[2];
};
int rapide_probe __P((struct device *, struct cfdata *, void *));
void rapide_attach __P((struct device *, struct device *, void *));
void rapide_shutdown __P((void *arg));
int rapide_intr __P((void *));
struct cfattach rapide_ca = {
sizeof(struct rapide_softc), rapide_probe, rapide_attach
};
/*
* We have a private bus space tag.
* This is created by copying the podulebus tag and then replacing
* a couple of the transfer functions.
*/
static struct bus_space rapide_bs_tag;
bs_rm_4_proto(rapide);
bs_wm_4_proto(rapide);
/*
* Create an array of address structures. These define the addresses and
* masks needed for the different channels for the card.
*
* XXX - Needs some work for issue 1 cards.
*/
struct {
u_int registers;
u_int aux_register;
u_int data_register;
u_int irq_mask;
} rapide_info[] = {
{ PRIMARY_DRIVE_REGISTERS_OFFSET, PRIMARY_AUX_REGISTER_OFFSET,
PRIMARY_DATA_REGISTER_OFFSET, PRIMARY_IRQ_MASK },
{ SECONDARY_DRIVE_REGISTERS_OFFSET, SECONDARY_AUX_REGISTER_OFFSET,
SECONDARY_DATA_REGISTER_OFFSET, SECONDARY_IRQ_MASK }
};
/*
* Card probe function
*
* Just match the manufacturer and podule ID's
*/
int
rapide_probe(parent, cf, aux)
struct device *parent;
struct cfdata *cf;
void *aux;
{
struct podule_attach_args *pa = (void *)aux;
if (matchpodule(pa, MANUFACTURER_YES, PODULE_YES_RAPIDE, -1) == 0)
return(0);
return(1);
}
/*
* Card attach function
*
* Identify the card version and configure any children.
* Install a shutdown handler to kill interrupts on shutdown
*/
void
rapide_attach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct rapide_softc *sc = (void *)self;
struct podule_attach_args *pa = (void *)aux;
bus_space_tag_t iot;
bus_space_handle_t ctlioh;
u_int iobase;
int channel;
struct channel_softc *cp;
irqhandler_t *ihp;
/* Note the podule number and validate */
if (pa->pa_podule_number == -1)
panic("Podule has disappeared !");
sc->sc_podule_number = pa->pa_podule_number;
sc->sc_podule = pa->pa_podule;
podules[sc->sc_podule_number].attached = 1;
set_easi_cycle_type(sc->sc_podule_number, EASI_CYCLE_TYPE_C);
/*
* Duplicate the podule bus space tag and provide alternative
* bus_space_read_multi_4() and bus_space_write_multi_4()
* functions.
*/
rapide_bs_tag = *pa->pa_iot;
rapide_bs_tag.bs_rm_4 = rapide_bs_rm_4;
rapide_bs_tag.bs_wm_4 = rapide_bs_wm_4;
sc->sc_ctliot = iot = &rapide_bs_tag;
if (bus_space_map(iot, pa->pa_podule->easi_base +
CONTROL_REGISTERS_OFFSET, CONTROL_REGISTER_SPACE, 0, &ctlioh))
panic("%s: Cannot map control registers\n", self->dv_xname);
sc->sc_ctlioh = ctlioh;
sc->sc_version = bus_space_read_1(iot, ctlioh, VERSION_REGISTER_OFFSET) & VERSION_REGISTER_MASK;
/* bus_space_unmap(iot, ctl_ioh, CONTROL_REGISTER_SPACE);*/
printf(" Issue %d\n", sc->sc_version + 1);
if (sc->sc_version != VERSION_2_ID)
return;
if (shutdownhook_establish(rapide_shutdown, (void *)sc) == NULL)
panic("%s: Cannot install shutdown handler", self->dv_xname);
/* Set the interrupt info for this podule */
sc->sc_podule->irq_addr = pa->pa_podule->easi_base
+ CONTROL_REGISTERS_OFFSET + IRQ_REQUEST_REGISTER_BYTE_OFFSET;
sc->sc_podule->irq_mask = IRQ_MASK;
iobase = pa->pa_podule->easi_base;
/* Fill in wdc and channel infos */
sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA32;
sc->sc_wdcdev.pio_mode = 0;
sc->sc_wdcdev.channels = sc->wdc_channel;
sc->sc_wdcdev.nchannels = 2;
for (channel = 0 ; channel < 2; channel++) {
cp = &sc->wdc_channel[channel];
cp->channel = channel;
cp->wdc = &sc->sc_wdcdev;
cp->ch_queue = malloc(sizeof(struct channel_queue),
M_DEVBUF, M_NOWAIT);
if (cp->ch_queue == NULL) {
printf("%s %s channel: can't allocate memory for "
"command queue", self->dv_xname,
(channel == 0) ? "primary" : "secondary");
continue;
}
cp->cmd_iot = iot;
cp->ctl_iot = iot;
cp->data32iot = iot;
if (bus_space_map(iot, iobase + rapide_info[channel].registers,
DRIVE_REGISTERS_SPACE, 0, &cp->cmd_ioh))
continue;
if (bus_space_map(iot, iobase +
rapide_info[channel].aux_register, 4, 0, &cp->ctl_ioh)) {
bus_space_unmap(iot, cp->cmd_ioh,
DRIVE_REGISTERS_SPACE);
continue;
}
if (bus_space_map(iot, iobase +
rapide_info[channel].data_register, 4, 0, &cp->data32ioh)) {
bus_space_unmap(iot, cp->cmd_ioh,
DRIVE_REGISTERS_SPACE);
bus_space_unmap(iot, cp->ctl_ioh, 4);
continue;
}
/* Disable interrupts and clear any pending interrupts */
sc->rapide_channels[channel].rc_irqmask =
rapide_info[channel].irq_mask;
sc->sc_intr_enable_mask &=
~sc->rapide_channels[channel].rc_irqmask;
bus_space_write_1(iot, sc->sc_ctlioh, IRQ_MASK_REGISTER_OFFSET,
sc->sc_intr_enable_mask);
/* XXX - Issue 1 cards will need to clear any pending interrupts */
wdcattach(cp);
ihp = &sc->rapide_channels[channel].rc_ih;
ihp->ih_func = rapide_intr;
ihp->ih_arg = cp;
ihp->ih_level = IPL_BIO;
ihp->ih_name = "rapide";
ihp->ih_maskaddr = pa->pa_podule->irq_addr;
ihp->ih_maskbits = sc->rapide_channels[channel].rc_irqmask;
if (irq_claim(sc->sc_podule->interrupt, ihp))
panic("%s: Cannot claim interrupt %d\n",
self->dv_xname, sc->sc_podule->interrupt);
/* clear any pending interrupts and enable interrupts */
sc->sc_intr_enable_mask |=
sc->rapide_channels[channel].rc_irqmask;
bus_space_write_1(iot, sc->sc_ctlioh,
IRQ_MASK_REGISTER_OFFSET, sc->sc_intr_enable_mask);
/* XXX - Issue 1 cards will need to clear any pending interrupts */
}
}
/*
* Card shutdown function
*
* Called via do_shutdown_hooks() during kernel shutdown.
* Clear the cards's interrupt mask to stop any podule interrupts.
*/
void
rapide_shutdown(arg)
void *arg;
{
struct rapide_softc *sc = arg;
/* Disable card interrupts */
bus_space_write_1(sc->sc_ctliot, sc->sc_ctlioh,
IRQ_MASK_REGISTER_OFFSET, 0);
}
/*
* Podule interrupt handler
*
* If the interrupt was from our card pass it on to the wdc interrupt handler
*/
int
rapide_intr(arg)
void *arg;
{
struct channel_softc *chp = arg;
struct rapide_softc *sc = (struct rapide_softc *)chp->wdc;
irqhandler_t *ihp = &sc->rapide_channels[chp->channel].rc_ih;
volatile u_char *intraddr = (volatile u_char *)ihp->ih_maskaddr;
/* XXX - Issue 1 cards will need to clear the interrupt */
/* XXX - not bus space yet - should really be handled by podulebus */
if ((*intraddr) & ihp->ih_maskbits)
wdcintr(chp);
return(0);
}