NetBSD/sys/arch/arm32/shark/sequoia.c

776 lines
17 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* $NetBSD: sequoia.c,v 1.5 2000/03/23 06:35:16 thorpej Exp $ */
/*
* Copyright 1997
* Digital Equipment Corporation. All rights reserved.
*
* This software is furnished under license and may be used and
* copied only in accordance with the following terms and conditions.
* Subject to these conditions, you may download, copy, install,
* use, modify and distribute this software in source and/or binary
* form. No title or ownership is transferred hereby.
*
* 1) Any source code used, modified or distributed must reproduce
* and retain this copyright notice and list of conditions as
* they appear in the source file.
*
* 2) No right is granted to use any trade name, trademark, or logo of
* Digital Equipment Corporation. Neither the "Digital Equipment
* Corporation" name nor any trademark or logo of Digital Equipment
* Corporation may be used to endorse or promote products derived
* from this software without the prior written permission of
* Digital Equipment Corporation.
*
* 3) This software is provided "AS-IS" and any express or implied
* warranties, including but not limited to, any implied warranties
* of merchantability, fitness for a particular purpose, or
* non-infringement are disclaimed. In no event shall DIGITAL be
* liable for any damages whatsoever, and in particular, DIGITAL
* shall not be liable for special, indirect, consequential, or
* incidental damages or damages for lost profits, loss of
* revenue or loss of use, whether such damages arise in contract,
* negligence, tort, under statute, in equity, at law or otherwise,
* even if advised of the possibility of such damage.
*/
/*
**
** INCLUDE FILES
**
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/callout.h>
#include <sys/syslog.h>
#include <sys/types.h>
#include <machine/bus.h>
#include <sys/time.h>
#include <sys/kernel.h>
#include <dev/isa/isareg.h>
#include <machine/isa_machdep.h>
#include <arm32/shark/sequoia.h>
#include <arm32/shark/fiq.h>
#include <machine/cpufunc.h>
/*
**
** MACROS
**
*/
#define SET(t, f) (t) |= (f)
#define CLR(t, f) (t) &= ~(f)
#define ISSET(t, f) ((t) & (f))
#define ISCLR(t, f) ( ((t) & (f)) == 0)
/* define regisers on sequoia used by pins */
#define SEQUOIA_1GPIO PMC_GPCR_REG /* reg 0x007 gpio 0-3 */
#define SEQUOIA_2GPIO SEQ2_OGPIOCR_REG /* reg 0x304 gpio 4.8 */
/* define pins on sequoia that talk to smart card reader */
#define SCR_DETECT_DIR GPIOCR2_M_GPIOBDIR0
#define SCR_DETECT GPIOCR2_M_GPIOBDATA0
#define SCR_POWER_DIR GPCR_M_GPIODIR0
#define SCR_POWER GPCR_M_GPIODATA0
#define SCR_RESET_DIR GPCR_M_GPIODIR1
#define SCR_RESET GPCR_M_GPIODATA1
#define SCR_CLOCK_DIR OGPIOCR_M_GPIODIR6
#define SCR_CLOCK OGPIOCR_M_GPIODATA6
#define SCR_DATA_IN_DIR GPCR_M_GPIODIR2
#define SCR_DATA_IN GPCR_M_GPIODATA2
#define SCR_DATA_OUT_DIR OGPIOCR_M_GPIODIR5
#define SCR_DATA_OUT OGPIOCR_M_GPIODATA5
#define SCR_BUGA_DIR OGPIOCR_M_GPIODIR4
#define SCR_BUGA OGPIOCR_M_GPIODATA4
#define SCR_BUGB_DIR OGPIOCR_M_GPIODIR7
#define SCR_BUGB OGPIOCR_M_GPIODATA7
/* define pins on sequoia that talk to leds */
#define LED_BILED_YELLOW_BIT FOMPCR_M_PCON5
#define LED_BILED_GREEN_BIT FOMPCR_M_PCON6
#define LED_DEBUG_YELLOW_BIT FOMPCR_M_PCON7
#define LED_DEBUG_GREEN_BIT FOMPCR_M_PCON8
/* define biled colors */
#define LED_BILED_NONE 0
#define LED_BILED_GREEN 1
#define LED_BILED_YELLOW 2
#define LED_BILED_RED 3
#define LED_TIMEOUT HZ / 20 /* 20 times a second */
#define LED_NET_ACTIVE (1000000/HZ) * LED_TIMEOUT /* delay in us for net activity */
/*
**
** DATA
**
*/
static bus_space_handle_t sequoia_ioh;
static struct timeval ledLastActive; /* last time we get net activity */
static int ledColor; /* present color of led */
static int ledBlockCount;; /* reference count of block calles */
int sequoia_index_cache = -1; /* set to silly value so that we dont cache on init */
static struct callout led_timo_ch = CALLOUT_INITIALIZER;
/*
**
** FUNCITONAL PROTOTYPES
**
*/
static void ledSetBiled(int color);
static void ledTimeout(void * arg);
/*
**
** FUNCITONS
**
*/
void sequoiaInit(void)
{
u_int16_t seqReg;
/* map the sequoi registers */
if (bus_space_map(&isa_io_bs_tag, SEQUOIA_BASE, SEQUOIA_NPORTS, 0, &sequoia_ioh))
{
panic("SequoiaInit: io mapping failed");
}
/*
**
** setup the pins associated with the X server
**
*/
/* seems power on sets them correctly */
/*
** setup the pins associated with the led
*/
sequoiaRead(SEQR_SEQPSR1_REG,&seqReg);
SET(seqReg,SEQPSR1_M_TAGDEN); /* enable pc[4:9] */
sequoiaWrite(SEQR_SEQPSR1_REG,seqReg);
sequoiaRead(SEQR_SEQPSR3_REG,&seqReg);
CLR(seqReg,SEQPSR3_M_PC5PINEN); /* enable pc5, biled */
CLR(seqReg,SEQPSR3_M_PC6PINEN); /* enable pc6, biled */
CLR(seqReg,SEQPSR3_M_PC7PINEN); /* enable pc7, debug led yellow */
CLR(seqReg,SEQPSR3_M_PC8PINEN); /* enable pc8, debug led green */
sequoiaWrite(SEQR_SEQPSR3_REG,seqReg);
sequoiaRead (PMC_FOMPCR_REG, &seqReg);
CLR(seqReg,LED_BILED_YELLOW_BIT);
CLR(seqReg,LED_BILED_GREEN_BIT);
SET(seqReg,LED_DEBUG_YELLOW_BIT);
CLR(seqReg,LED_DEBUG_GREEN_BIT);
sequoiaWrite(PMC_FOMPCR_REG, seqReg);
/* setup the biled info */
ledColor = LED_BILED_GREEN;
ledLastActive.tv_usec = 0;
ledLastActive.tv_sec = 0;
ledBlockCount = 0;
callout_reset(&led_timo_ch, LED_TIMEOUT, ledTimeout, NULL);
/*
**
** setup the pins associated with the smart card reader *
**
*/
/* sequoia 1 direction & data */
sequoiaRead(SEQUOIA_1GPIO,&seqReg);
SET(seqReg,SCR_POWER_DIR); /* output */
SET(seqReg,SCR_RESET_DIR); /* output */
CLR(seqReg,SCR_DATA_IN_DIR); /* input */
CLR(seqReg,SCR_POWER); /* 0V to card */
SET(seqReg,SCR_RESET); /* 0V to card */
sequoiaWrite(SEQUOIA_1GPIO,seqReg);
/* sequoia 2 pin enables */
sequoiaRead(SEQ2_SEQ2PSR_REG,&seqReg);
SET(seqReg,SEQ2PSR_M_DPBUSEN);
CLR(seqReg,SEQ2PSR_M_GPIOPINEN);
sequoiaWrite(SEQ2_SEQ2PSR_REG,seqReg);
/* sequoia 2 direction & data */
sequoiaRead(SEQUOIA_2GPIO,&seqReg);
SET(seqReg,SCR_BUGA_DIR); /* output */
SET(seqReg,SCR_DATA_OUT_DIR); /* output */
SET(seqReg,SCR_CLOCK_DIR); /* output */
SET(seqReg,SCR_BUGB_DIR); /* output */
CLR(seqReg,SCR_BUGA); /* 0 */
CLR(seqReg,SCR_BUGB); /* 0 */
CLR(seqReg,SCR_CLOCK); /* 0 */
sequoiaWrite(SEQUOIA_2GPIO,seqReg);
/* setup the wak0 pin to be detect */
sequoiaRead(SEQR_SEQPSR2_REG,&seqReg);
SET(seqReg,SEQPSR2_M_DIRTYPINEN);
SET(seqReg,SEQPSR2_M_GPIOB0PINEN);
sequoiaWrite(SEQR_SEQPSR2_REG,seqReg);
sequoiaRead(PMC_GPIOCR2_REG,&seqReg);
CLR(seqReg,SCR_DETECT_DIR); /* input */
sequoiaWrite(PMC_GPIOCR2_REG,seqReg);
/* don't delay when setting PC bits. this is particularly important
for using PC[4] to clear the FIQ. */
sequoiaRead(PMC_SCCR_REG, &seqReg);
sequoiaWrite(PMC_SCCR_REG, seqReg | SCCR_M_PCSTGDIS);
}
/* X console functions */
void consXTvOn(void)
{
u_int16_t savedPSR3;
u_int16_t savedFMPCR;
/*
** Switch on TV output on the Sequoia, data indicates mode,
** but we are currently hardwired to NTSC, so ignore it.
*/
sequoiaRead (SEQR_SEQPSR3_REG, &savedPSR3);
sequoiaWrite(SEQR_SEQPSR3_REG, (savedPSR3 | SEQPSR3_M_PC3PINEN));
sequoiaRead (PMC_FOMPCR_REG, &savedFMPCR);
sequoiaWrite(PMC_FOMPCR_REG, (savedFMPCR | FOMPCR_M_PCON3));
}
void consXTvOff(void)
{
u_int16_t savedPSR3;
u_int16_t savedFMPCR;
/*
** Switch off TV output on the Seqoia
*/
sequoiaRead (SEQR_SEQPSR3_REG, &savedPSR3);
sequoiaWrite(SEQR_SEQPSR3_REG, (savedPSR3 & ~SEQPSR3_M_PC3PINEN));
sequoiaRead (PMC_FOMPCR_REG, &savedFMPCR);
sequoiaWrite(PMC_FOMPCR_REG, (savedFMPCR & ~FOMPCR_M_PCON3));
}
/* smart card routines */
int scrGetDetect (void)
{
int r;
u_int16_t seqReg;
sequoiaRead(PMC_GPIOCR2_REG,&seqReg);
/* inverse logic, so invert */
if (ISSET(seqReg,SCR_DETECT))
{
r = 0;
} else
{
r = 1;
}
return r;
}
void scrSetPower (int value)
{
u_int16_t seqReg;
#ifdef SHARK
u_int savedints;
savedints = disable_interrupts(I32_bit | F32_bit);
#endif
sequoiaRead(SEQUOIA_1GPIO,&seqReg);
if (value)
{
SET(seqReg,SCR_POWER);
} else
{
CLR(seqReg,SCR_POWER);
}
sequoiaWrite(SEQUOIA_1GPIO,seqReg);
#ifdef SHARK
restore_interrupts(savedints);
#endif
}
void scrSetClock (int value)
{
u_int16_t seqReg;
#ifdef SHARK
u_int savedints;
savedints = disable_interrupts(I32_bit | F32_bit);
#endif
sequoiaRead(SEQUOIA_2GPIO,&seqReg);
if (value)
{
SET(seqReg,SCR_CLOCK);
} else
{
CLR(seqReg,SCR_CLOCK);
}
sequoiaWrite(SEQUOIA_2GPIO,seqReg);
#ifdef SHARK
restore_interrupts(savedints);
#endif
}
void scrSetReset (int value)
{
u_int16_t seqReg;
#ifdef SHARK
u_int savedints;
savedints = disable_interrupts(I32_bit | F32_bit);
#endif
sequoiaRead(SEQUOIA_1GPIO,&seqReg);
if (value)
{
SET(seqReg,SCR_RESET);
} else
{
CLR(seqReg,SCR_RESET);
}
sequoiaWrite(SEQUOIA_1GPIO,seqReg);
#ifdef SHARK
restore_interrupts(savedints);
#endif
}
void scrSetDataHighZ (void)
{
u_int16_t seqReg;
#ifdef SHARK
u_int savedints;
savedints = disable_interrupts(I32_bit | F32_bit);
#endif
sequoiaRead(SEQUOIA_2GPIO,&seqReg);
/* set data to 5V, io pin is inverse logic */
CLR(seqReg,SCR_DATA_OUT);
sequoiaWrite(SEQUOIA_2GPIO,seqReg);
#ifdef SHARK
restore_interrupts(savedints);
#endif
}
void scrSetData (int value)
{
u_int16_t seqReg;
#ifdef SHARK
u_int savedints;
savedints = disable_interrupts(I32_bit | F32_bit);
#endif
sequoiaRead(SEQUOIA_2GPIO,&seqReg);
/* inverse logic */
if (value )
{
CLR(seqReg,SCR_DATA_OUT);
} else
{
SET(seqReg,SCR_DATA_OUT);
}
sequoiaWrite(SEQUOIA_2GPIO,seqReg);
#ifdef SHARK
restore_interrupts(savedints);
#endif
}
int scrGetData (void)
{
int r;
u_int16_t seqReg;
sequoiaRead(SEQUOIA_1GPIO,&seqReg);
if (ISSET(seqReg,SCR_DATA_IN))
{
r = 1;
} else
{
r = 0;
}
return r;
}
void ledNetActive (void)
{
ledLastActive = time;
}
void ledNetBlock (void)
{
ledBlockCount++;
}
void ledNetUnblock (void)
{
ledBlockCount--;
}
void ledPanic (void)
{
/* we are in panic, timeout wont happen, so set led */
ledSetBiled(LED_BILED_RED);
}
static void ledTimeout(void * arg)
{
int timeSpan; /* in usec */
if(time.tv_sec == ledLastActive.tv_sec)
{
timeSpan = time.tv_usec - ledLastActive.tv_usec;
}
else if (time.tv_sec - 10 < ledLastActive.tv_sec) /* stop rollover problems */
{
timeSpan = (1000000 + time.tv_usec) - ledLastActive.tv_usec;
}
else
{
timeSpan = LED_NET_ACTIVE * 2; /* ie big number */
}
/* check if we are blocked */
if(ledBlockCount)
{
if(ledColor == LED_BILED_YELLOW)
{
ledSetBiled(LED_BILED_NONE);
}
else
{
ledSetBiled(LED_BILED_YELLOW);
}
}
/* check if we have network activity */
else if (timeSpan < LED_NET_ACTIVE)
{
if(ledColor == LED_BILED_GREEN)
{
ledSetBiled(LED_BILED_NONE);
}
else
{
ledSetBiled(LED_BILED_GREEN);
}
}
/* normal operating mode */
else
{
if(ledColor != LED_BILED_GREEN)
{
ledSetBiled(LED_BILED_GREEN);
}
}
/* resubmint the timeout */
callout_reset(&led_timo_ch, LED_TIMEOUT, ledTimeout, NULL);
}
static void ledSetBiled(int color)
{
u_int16_t seqReg;
#ifdef SHARK
u_int savedints;
savedints = disable_interrupts(I32_bit | F32_bit);
#endif
ledColor = color;
sequoiaRead (PMC_FOMPCR_REG, &seqReg);
switch(color)
{
case LED_BILED_NONE:
SET(seqReg,LED_BILED_YELLOW_BIT);
SET(seqReg,LED_BILED_GREEN_BIT);
break;
case LED_BILED_YELLOW:
CLR(seqReg,LED_BILED_YELLOW_BIT);
SET(seqReg,LED_BILED_GREEN_BIT);
break;
case LED_BILED_GREEN:
SET(seqReg,LED_BILED_YELLOW_BIT);
CLR(seqReg,LED_BILED_GREEN_BIT);
break;
case LED_BILED_RED:
CLR(seqReg,LED_BILED_YELLOW_BIT);
CLR(seqReg,LED_BILED_GREEN_BIT);
break;
default:
panic("invalid color %x\n",color);
break;
}
sequoiaWrite(PMC_FOMPCR_REG, seqReg);
#ifdef SHARK
restore_interrupts(savedints);
#endif
}
int hwGetRev(void)
{
u_int16_t seqReg;
sequoiaRead(SR_POR_REG,&seqReg);
seqReg = seqReg >> POR_V_MISCCF0;
seqReg = seqReg & 0x7;
return seqReg;
}
/* routines to read/write to sequoia registers */
void sequoiaWrite(int reg,u_int16_t seqReg)
{
#ifdef SHARK
u_int savedints;
savedints = disable_interrupts(I32_bit | F32_bit);
#endif
/*
On SHARK, the fiq comes from the pmi/smi. After receiving
a FIQ, the SMI must be cleared. The SMI gets cleared by
changing to sleep mode, thereby lowering PC[4]. */
// need to do the right thing with the cache if this is going to work */
if (reg == PMC_FOMPCR_REG) {
bus_space_write_2(&isa_io_bs_tag,sequoia_ioh,SEQUOIA_INDEX_OFFSET,reg);
bus_space_write_2(&isa_io_bs_tag,sequoia_ioh,SEQUOIA_DATA_OFFSET,
seqReg | (FOMPCR_M_PCON4));
bus_space_write_2(&isa_io_bs_tag,sequoia_ioh,SEQUOIA_INDEX_OFFSET,
PMC_SLPMPCR_REG);
bus_space_write_2(&isa_io_bs_tag,sequoia_ioh,SEQUOIA_DATA_OFFSET,
seqReg & ~(SLPMPCR_M_PCSLP4));
sequoia_index_cache = PMC_SLPMPCR_REG;
} else {
/* normal case: just do the write */
if(sequoia_index_cache != reg)
{
sequoia_index_cache = reg;
bus_space_write_2(&isa_io_bs_tag,sequoia_ioh,SEQUOIA_INDEX_OFFSET,reg);
}
bus_space_write_2(&isa_io_bs_tag,sequoia_ioh,SEQUOIA_DATA_OFFSET,seqReg);
}
#ifdef SHARK
restore_interrupts(savedints);
#endif
}
void sequoiaRead (int reg,u_int16_t * seqReg_ptr)
{
#ifdef SHARK
u_int savedints;
savedints = disable_interrupts(I32_bit | F32_bit);
#endif
if(sequoia_index_cache != reg)
{
sequoia_index_cache = reg;
bus_space_write_2(&isa_io_bs_tag,sequoia_ioh,SEQUOIA_INDEX_OFFSET,reg);
}
*seqReg_ptr = bus_space_read_2(&isa_io_bs_tag,sequoia_ioh,SEQUOIA_DATA_OFFSET);
#ifdef SHARK
restore_interrupts(savedints);
#endif
}
void ledSetDebug(int command)
{
u_int16_t seqReg;
#ifdef SHARK
u_int savedints;
savedints = disable_interrupts(I32_bit | F32_bit);
#endif
sequoiaRead (PMC_FOMPCR_REG, &seqReg);
switch (command)
{
case LED_DEBUG_STATE_0:
CLR(seqReg,LED_DEBUG_YELLOW_BIT);
CLR(seqReg,LED_DEBUG_GREEN_BIT);
break;
case LED_DEBUG_STATE_1:
SET(seqReg,LED_DEBUG_YELLOW_BIT);
CLR(seqReg,LED_DEBUG_GREEN_BIT);
break;
case LED_DEBUG_STATE_2:
CLR(seqReg,LED_DEBUG_YELLOW_BIT);
SET(seqReg,LED_DEBUG_GREEN_BIT);
break;
case LED_DEBUG_STATE_3:
SET(seqReg,LED_DEBUG_YELLOW_BIT);
SET(seqReg,LED_DEBUG_GREEN_BIT);
break;
case LED_DEBUG_YELLOW_ON:
SET(seqReg,LED_DEBUG_YELLOW_BIT);
break;
case LED_DEBUG_YELLOW_OFF:
CLR(seqReg,LED_DEBUG_YELLOW_BIT);
break;
case LED_DEBUG_GREEN_ON:
SET(seqReg,LED_DEBUG_GREEN_BIT);
break;
case LED_DEBUG_GREEN_OFF:
CLR(seqReg,LED_DEBUG_GREEN_BIT);
break;
default:
panic("ledSetDebug: invalid command %d\n",command);
break;
}
sequoiaWrite(PMC_FOMPCR_REG, seqReg);
#ifdef SHARK
restore_interrupts(savedints);
#endif
}
#ifdef USEFULL_DEBUG
void sequoiaOneAccess(void)
{
u_int16_t reg;
#ifdef SHARK
u_int savedints;
savedints = disable_interrupts(I32_bit | F32_bit);
#endif
reg = bus_space_read_2(&isa_io_bs_tag,sequoia_ioh,SEQUOIA_DATA_OFFSET);
#ifdef SHARK
restore_interrupts(savedints);
#endif
}
#endif
int testPin=0;
void scrToggleTestPin (void)
{
u_int16_t seqReg;
#ifdef SHARK
u_int savedints;
savedints = disable_interrupts(I32_bit | F32_bit);
#endif
sequoiaRead(SEQUOIA_2GPIO,&seqReg);
if (testPin)
{
testPin = 0;
CLR(seqReg,SCR_BUGA);
}
else
{
SET(seqReg,SCR_BUGA);
testPin = 1;
}
sequoiaWrite(SEQUOIA_2GPIO,seqReg);
#ifdef SHARK
restore_interrupts(savedints);
#endif
}