NetBSD/sys/dev/pci/oboereg.h

154 lines
4.1 KiB
C

/* $NetBSD: oboereg.h,v 1.2 2008/04/28 20:23:55 martin Exp $ */
/*-
* Copyright (c) 2000 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jan Sparud.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Toshiba OBOE SIR/FIR driver header file.
*/
#ifndef OBOE_H
#define OBOE_H
/* Registers */
/*Receive and transmit task registers (read only) */
#define OBOE_RCVT (0x00)
#define OBOE_XMTT (0x01)
#define OBOE_XMTT_OFFSET 0x40
/*Page pointers to the TaskFile structure */
#define OBOE_TFP2 (0x02)
#define OBOE_TFP0 (0x04)
#define OBOE_TFP1 (0x05)
/*Dunno */
#define OBOE_REG_3 (0x03)
/*Number of tasks to use in Xmit and Recv queues */
#define OBOE_NTR (0x07)
#define OBOE_NTR_XMIT4 0x00
#define OBOE_NTR_XMIT8 0x10
#define OBOE_NTR_XMIT16 0x30
#define OBOE_NTR_XMIT32 0x70
#define OBOE_NTR_XMIT64 0xf0
#define OBOE_NTR_RECV4 0x00
#define OBOE_NTR_RECV8 0x01
#define OBOE_NTR_RECV6 0x03
#define OBOE_NTR_RECV32 0x07
#define OBOE_NTR_RECV64 0x0f
/* Dunno */
#define OBOE_REG_9 (0x09)
/* Interrupt Status Register */
#define OBOE_ISR (0x0c)
#define OBOE_ISR_TXDONE 0x80
#define OBOE_ISR_RXDONE 0x40
#define OBOE_ISR_20 0x20
#define OBOE_ISR_10 0x10
#define OBOE_ISR_8 0x08 /*This is collision or parity or something */
#define OBOE_ISR_4 0x08
#define OBOE_ISR_2 0x08
#define OBOE_ISR_1 0x08
/*Dunno */
#define OBOE_REG_D (0x0d)
/*Register Lock Register */
#define OBOE_LOCK (0x0e)
/*Speed control registers */
#define OBOE_PMDL (0x10)
#define OBOE_PMDL_SIR 0x18
#define OBOE_PMDL_MIR 0xa0
#define OBOE_PMDL_FIR 0x40
#define OBOE_SMDL (0x18)
#define OBOE_SMDL_SIR 0x20
#define OBOE_SMDL_MIR 0x01
#define OBOE_SMDL_FIR 0x0f
#define OBOE_UDIV (0x19)
/*Dunno */
#define OBOE_REG_11 (0x11)
/*Chip Reset Register */
#define OBOE_RST (0x15)
#define OBOE_RST_WRAP 0x8
/*Dunno */
#define OBOE_REG_1A (0x1a)
#define OBOE_REG_1B (0x1b)
#define OBOE_IOSIZE 0x1f
#define IO_BAR 0x10
typedef unsigned int dword;
typedef unsigned short int word;
typedef unsigned char byte;
typedef dword Paddr;
struct OboeTask {
uint16_t len;
uint8_t unused;
uint8_t control;
uint32_t buffer;
};
#define OBOE_NTASKS 64
struct OboeTaskFile {
struct OboeTask recv[OBOE_NTASKS];
struct OboeTask xmit[OBOE_NTASKS];
};
#define OBOE_TASK_BUF_LEN (sizeof(struct OboeTaskFile) << 1)
/*These set the number of slots in use */
#define TX_SLOTS 8
#define RX_SLOTS 8
#define RX_BUF_SZ 4196
#define TX_BUF_SZ 4196
/* You need also to change this, toshiba uses 4,8 and 4,4 */
/* It makes no difference if you are only going to use ONETASK mode */
/* remember each buffer use XX_BUF_SZ more _PHYSICAL_ memory */
#define OBOE_NTR_VAL (OBOE_NTR_XMIT8 | OBOE_NTR_RECV8)
#define OUTB(sc, val, off) \
bus_space_write_1(sc->sc_iot, sc->sc_ioh, off, val)
#define INB(sc, off) \
bus_space_read_1(sc->sc_iot, sc->sc_ioh, off)
#endif