NetBSD/gnu/libexec/uucp/policy.h

420 lines
18 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* policy.h
Configuration file for policy decisions. To be edited on site.
Copyright (C) 1991, 1992 Ian Lance Taylor
This file is part of the Taylor UUCP package.
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
The author of the program may be contacted at ian@airs.com or
c/o AIRS, P.O. Box 520, Waltham, MA 02254.
$Id: policy.h,v 1.2 1993/08/02 17:25:07 mycroft Exp $
*/
/* This header file contains macro definitions which must be set by
each site before compilation. The first few are system
characteristics that can not be easily discovered by the
configuration script. Most are configuration decisions that must
be made by the local administrator. */
/* System characteristics. */
/* This code tries to use several ANSI C features, including
prototypes, stdarg.h, the const qualifier and the types void
(including void * pointers) and unsigned char. By default it will
use these features if the compiler defines __STDC__. If your
compiler supports these features but does not define __STDC__, you
should set ANSI_C to 1. If your compiler does not support these
features but defines __STDC__ (no compiler should do this, in my
opinion), you should set ANSI_C to 0. In most cases (or if you're
not sure) just leave the line below commented out. */
/* #define ANSI_C 1 */
/* Set USE_STDIO to 1 if data files should be read using the stdio
routines (fopen, fread, etc.) rather than the UNIX unbuffered I/O
calls (open, read, etc.). Unless you know your stdio is really
rotten, you should leave this as 1. */
#define USE_STDIO 1
/* Exactly one of the following macros must be set to 1. Many modern
systems support more than one of these choices through some form of
compilation environment, in which case the setting will depend on
the compilation environment you use. If you have a reasonable
choice between options, I suspect that TERMIO or TERMIOS will be
more efficient than TTY, but I have not done any head to head
comparisons.
If you don't set any of these macros, the code below will guess.
It will doubtless be wrong on some systems.
HAVE_BSD_TTY -- Use the 4.2BSD tty routines
HAVE_SYSV_TERMIO -- Use the System V termio routines
HAVE_POSIX_TERMIOS -- Use the POSIX termios routines
*/
#define HAVE_BSD_TTY 1
#define HAVE_SYSV_TERMIO 0
#define HAVE_POSIX_TERMIOS 0
/* This code tries to guess which terminal driver to use if you did
not make a choice above. It is in this file to make it easy to
figure out what's happening if something goes wrong. */
#if HAVE_BSD_TTY + HAVE_SYSV_TERMIO + HAVE_POSIX_TERMIOS == 0
#if HAVE_CBREAK
#undef HAVE_BSD_TTY
#define HAVE_BSD_TTY 1
#else
#undef HAVE_SYSV_TERMIO
#define HAVE_SYSV_TERMIO 1
#endif
#endif
/* On some systems a write to a serial port will block even if the
file descriptor has been set to not block. File transfer can be
more efficient if the package knows that a write to the serial port
will not block; however, if the write does block unexpectedly then
data loss is possible at high speeds.
If writes to a serial port always block even when requested not to,
you should set HAVE_UNBLOCKED_WRITES to 0; otherwise you should set
it to 1. In general on System V HAVE_UNBLOCKED_WRITES should be 0
and on BSD it should be 1.
If HAVE_UNBLOCKED_WRITES is set to 1 when it should be 0 you may
see an unexpectedly large number of transmission errors, or, if you
have hardware handshaking, transfer times may be lower than
expected (but then, they always are). If HAVE_UNBLOCKED_WRITES is
set to 0 when it should be 1, file transfer will use more CPU time
than necessary. If you are unsure, setting HAVE_UNBLOCKED_WRITES
to 0 should always be safe. */
#define HAVE_UNBLOCKED_WRITES 1
/* When the code does do a blocking write, it wants to write the
largest amount of data which the kernel will accept as a single
unit. On BSD this is typically the value of OBUFSIZ in
<sys/tty.h>, usually 100. On System V this is typically the size
of a clist, CLSIZE in <sys/tty.h>, which is usually 64. Define
SINGLE_WRITE to the correct value for your system. If SINGLE_WRITE
is too large, data loss may occur. If SINGLE_WRITE is too small,
file transfer will use more CPU time than necessary. If you have
no idea, 64 should work on most modern systems. */
#define SINGLE_WRITE 100
/* Set TIMES_TICK to the fraction of a second which times(2) returns
(for example, if times returns 100ths of a second TIMES_TICK should
be set to 100). On a true POSIX system TIMES_TICK may simply be
defined as CLK_TCK. On some systems the environment variable HZ is
what you want for TIMES_TICK, but on some other systems HZ has the
wrong value; check the man page. If you leave this set to 0, the
code will try to guess; it will doubtless be wrong on some systems.
If TIMES_TICK is wrong the code may report incorrect file transfer
times in the statistics file, but on many systems times(2) will
actually not be used and this value will not matter at all. */
#define TIMES_TICK 60
/* Set PS_PROGRAM to the program to run to get a process status,
including the arguments to pass it. This is used by ``uustat -p''.
Set HAVE_PS_MULTIPLE to 1 if a comma separated list of process
numbers may be appended (e.g. ``ps -flp1,10,100''). Otherwise ps
will be invoked several times, with a single process number append
each time. The default definitions should work on most systems,
although some may complain about the 'p' option. The second set of
definitions are appropriate for System V. To use the second set of
definitions, change the ``#if 1'' to ``#if 0''. */
#if 1
#define PS_PROGRAM "/bin/ps -lp"
#define HAVE_PS_MULTIPLE 0
#else
#define PS_PROGRAM "/bin/ps -flp"
#define HAVE_PS_MULTIPLE 1
#endif
/* If you use other programs that also lock devices, such as cu or
uugetty, the other programs and UUCP must agree on whether a device
is locked. This is typically done by creating a lock file in a
specific directory. The lock file is named LCK.. followed by the
name of the device (UUCP and some versions of cu also lock systems
this way). If the LOCKDIR macro is defined, these lock files will
be placed in the named directory; otherwise they will be placed in
the default spool directory. On some BNU systems the lock files
are placed in /etc/locks. On some they are placed in
/usr/spool/locks. */
/* #define LOCKDIR "/etc/locks" */
#define LOCKDIR "/var/spool/lock"
/* You must also specify the format of the lock files by setting
exactly one of the following macros to 1. Check an existing lock
file to decide which of these choices is more appropriate.
The BNU style is to write the locking process ID in ASCII, passed
to ten characters, followed by a newline.
The V2 style is to write the locking process ID as four binary
bytes in the host byte order.
SCO lock files are similar to BNU lock files, but always lock the
lowercase version of the tty (i.e., LCK..tty2a is created if you
are locking tty2A). They are appropriate if you are using Taylor
UUCP on an SCO Unix, SCO Xenix, or SCO Open Desktop system.
SVR4 lock files are also similar to BNU lock files, but they use a
different naming convention. The filenames are LK.xxx.yyy.zzz,
where xxx is the major device number of the device holding the
special device file, yyy is the major device number of the port
device itself, and zzz is the minor device number of the port
device. */
#define HAVE_V2_LOCKFILES 0
#define HAVE_BNU_LOCKFILES 1
#define HAVE_SCO_LOCKFILES 0
#define HAVE_SVR4_LOCKFILES 0
/* If your system supports Internet mail addresses, HAVE_INTERNET_MAIL
should be set to 1. This is checked by uuxqt when sending error
(or success, if requested) notifications to the person who
submitted the job. */
#define HAVE_INTERNET_MAIL 1
/* Adminstrative decisions. */
/* Set USE_RCS_ID to 1 if you want the RCS ID strings compiled into
the executable. Leaving them out will decrease the executable
size. Leaving them in will make it easier to determine which
version you are running. */
#define USE_RCS_ID 1
/* DEBUG controls how much debugging information is compiled into the
code. If DEBUG is defined as 0, no sanity checks will be done and
no debugging messages will be compiled in. If DEBUG is defined as
1 sanity checks will be done but there will still be no debugging
messages. If DEBUG is 2 than debugging messages will be compiled
in. When initially testing, DEBUG should be 2, and you should
probably leave it at 2 unless a small reduction in the executable
file size will be very helpful. */
#define DEBUG 2
/* Set the default grade to use for a uucp command if the -g option is
not used. The grades, from highest to lowest, are 0 to 9, A to Z,
a to z. */
#define BDEFAULT_UUCP_GRADE ('N')
/* Set the default grade to use for a uux command if the -g option is
not used. */
#define BDEFAULT_UUX_GRADE ('N')
/* The maximum number of times to retry calling a system which is not
answering. If this many calls to the system have failed, the
system will not be called again until the status file has been
removed (on a Unix system the status file is in the .Status
subdirectory of the main spool directory, and has the same name as
the system name). If this is set to 0 the system may be called
regardless of how many previous calls have failed. */
#define CMAXRETRIES 26
/* To compile in use of the new style of configuration files described
in the documentation, set HAVE_TAYLOR_CONFIG to 1. */
#define HAVE_TAYLOR_CONFIG 1
/* To compile in use of V2 style configuration files (L.sys, L-devices
and so on), set HAVE_V2_CONFIG to 1. To compile in use of BNU
style configuration files (Systems, Devices and so on) set
HAVE_BNU_CONFIG to 1. The files will be looked up in the
oldconfigdir directory as defined in the Makefile.
You may set any or all of HAVE_TAYLOR_CONFIG, HAVE_V2_CONFIG and
HAVE_BNU_CONFIG to 1 (you must set at least one of the macros).
When looking something up (a system, a port, etc.) the new style
configuration files will be read first, followed by the V2
configuration files, followed by the BNU configuration files. */
#define HAVE_V2_CONFIG 0
#define HAVE_BNU_CONFIG 0
/* Exactly one of the following macros must be set to 1. The exact
format of the spool directories is explained in sys3.unx.
SPOOLDIR_V2 -- Use a Version 2 (original UUCP) style spool directory
SPOOLDIR_BSD42 -- Use a BSD 4.2 style spool directory
SPOOLDIR_BSD43 -- Use a BSD 4.3 style spool directory
SPOOLDIR_BNU -- Use a BNU (HDB) style spool directory
SPOOLDIR_ULTRIX -- Use an Ultrix style spool directory
SPOOLDIR_TAYLOR -- Use a new style spool directory
If you are not worried about compatibility with a currently running
UUCP, use SPOOLDIR_TAYLOR. */
#define SPOOLDIR_V2 0
#define SPOOLDIR_BSD42 0
#define SPOOLDIR_BSD43 0
#define SPOOLDIR_BNU 0
#define SPOOLDIR_ULTRIX 0
#define SPOOLDIR_TAYLOR 1
/* You must select which type of logging you want by setting exactly
one of the following to 1. These control output to the log file
and to the statistics file.
If you define HAVE_TAYLOR_LOGGING, each line in the log file will
look something like this:
uucico uunet uucp (1991-12-10 09:04:34.45 16390) Receiving uunet/D./D.uunetSwJ72
and each line in the statistics file will look something like this:
uucp uunet (1991-12-10 09:04:40.20) received 2371 bytes in 5 seconds (474 bytes/sec)
If you define HAVE_V2_LOGGING, each line in the log file will look
something like this:
uucico uunet uucp (12/10-09:04 16390) Receiving uunet/D./D.uunetSwJ72
and each line in the statistics file will look something like this:
uucp uunet (12/10-09:04 16390) (692373862) received data 2371 bytes 5 seconds
If you define HAVE_BNU_LOGGING, each program will by default use a
separate log file. For uucico talking to uunet, for example, it
will be /usr/spool/uucp/.Log/uucico/uunet. Each line will look
something like this:
uucp uunet (12/10-09:04:22,16390,1) Receiving uunet/D./D.uunetSwJ72
and each line in the statistics file will look something like this:
uunet!uucp M (12/10-09:04:22) (C,16390,1) [ttyXX] <- 2371 / 5.000 secs, 474 bytes/sec
The main reason to prefer one format over another is that you may
have shell scripts which expect the files to have a particular
format. If you have none, choose whichever format you find more
appealing. */
#define HAVE_TAYLOR_LOGGING 1
#define HAVE_V2_LOGGING 0
#define HAVE_BNU_LOGGING 0
/* If you would like the log, debugging and statistics files to be
closed after each message, set CLOSE_LOGFILES to 1. This will
permit the log files to be easily moved. If a log file does not
exist when a new message is written out, it will be created.
Setting CLOSE_LOGFILES to 1 will obviously require slightly more
processing time. */
#define CLOSE_LOGFILES 0
/* The name of the default spool directory. If HAVE_TAYLOR_CONFIG is
set to 1, this may be overridden by the ``spool'' command in the
configuration file. */
#define SPOOLDIR "/var/spool/uucp"
/* The name of the default public directory. If HAVE_TAYLOR_CONFIG is
set to 1, this may be overridden by the ``pubdir'' command in the
configuration file. Also, a particular system may be given a
specific public directory by using the ``pubdir'' command in the
system file. */
#define PUBDIR "/var/spool/uucppublic"
/* The default command path. This is a space separated list of
directories. Remote command executions requested by uux are looked
up using this path. If you are using HAVE_TAYLOR_CONFIG, the
command path may be overridden for a particular system. For most
systems, you should just make sure that the programs rmail and
rnews can be found using this path. */
#define CMDPATH "/bin /usr/bin /usr/local/bin"
/* The default amount of free space to require for systems that do not
specify an amount with the ``free-space'' command. This is only
used when talking to another instance of Taylor UUCP; if accepting
a file would not leave at least this many bytes free on the disk,
it will be refused. */
#define DEFAULT_FREE_SPACE (50000)
/* It is possible for an execute job to request to be executed using
sh(1), rather than execve(2). This is such a security risk, it is
being disabled by default; to allow such jobs, set the following
macro to 1. */
#define ALLOW_SH_EXECUTION 0
/* If a command executed on behalf of a remote system takes a filename
as an argument, a security breach may be possible (note that on my
system neither of the default commands, rmail and rnews, take
filename arguments). If you set ALLOW_FILENAME_ARGUMENTS to 0, all
arguments to a command will be checked; if any argument
1) starts with ../
2) contains the string /../
3) begins with a / but does not name a file that may be sent or
received (according to the specified ``remote-send'' and
``remote-receive'')
the command will be rejected. By default, any argument is
permitted. */
#define ALLOW_FILENAME_ARGUMENTS 1
#if HAVE_TAYLOR_LOGGING
/* The default log file when using HAVE_TAYLOR_LOGGING. When using
HAVE_TAYLOR_CONFIG, this may be overridden by the ``logfile''
command in the configuration file. */
#define LOGFILE "/var/spool/uucp/Log"
/* The default statistics file when using HAVE_TAYLOR_LOGGING. When
using HAVE_TAYLOR_CONFIG, this may be overridden by the
``statfile'' command in the configuration file. */
#define STATFILE "/var/spool/uucp/Stats"
/* The default debugging file when using HAVE_TAYLOR_LOGGING. When
using HAVE_TAYLOR_CONFIG, this may be overridden by the
``debugfile'' command in the configuration file. */
#define DEBUGFILE "/var/spool/uucp/Debug"
#endif /* HAVE_TAYLOR_LOGGING */
#if HAVE_V2_LOGGING
/* The default log file when using HAVE_V2_LOGGING. When using
HAVE_TAYLOR_CONFIG, this may be overridden by the ``logfile''
command in the configuration file. */
#define LOGFILE "/var/spool/uucp/LOGFILE"
/* The default statistics file when using HAVE_V2_LOGGING. When using
HAVE_TAYLOR_CONFIG, this may be overridden by the ``statfile''
command in the configuration file. */
#define STATFILE "/var/spool/uucp/SYSLOG"
/* The default debugging file when using HAVE_V2_LOGGING. When using
HAVE_TAYLOR_CONFIG, this may be overridden by the ``debugfile''
command in the configuration file. */
#define DEBUGFILE "/var/spool/uucp/DEBUG"
#endif /* HAVE_V2_LOGGING */
#if HAVE_BNU_LOGGING
/* The default log file when using HAVE_BNU_LOGGING. When using
HAVE_TAYLOR_CONFIG, this may be overridden by the ``logfile''
command in the configuration file. The first %s in the string will
be replaced by the program name (e.g. uucico); the second %s will
be replaced by the system name (if there is no appropriate system,
"ANY" will be used). No other '%' character may appear in the
string. */
#define LOGFILE "/var/spool/uucp/.Log/%s/%s"
/* The default statistics file when using HAVE_BNU_LOGGING. When using
HAVE_TAYLOR_CONFIG, this may be overridden by the ``statfile''
command in the configuration file. */
#define STATFILE "/var/spool/uucp/.Admin/xferstats"
/* The default debugging file when using HAVE_BNU_LOGGING. When using
HAVE_TAYLOR_CONFIG, this may be overridden by the ``debugfile''
command in the configuration file. */
#define DEBUGFILE "/var/spool/uucp/.Admin/audit.local"
#endif /* HAVE_BNU_LOGGING */