NetBSD/sys/dev/marvell/gti2creg.h
2006-03-08 23:46:22 +00:00

84 lines
3.8 KiB
C

/* $NetBSD: gti2creg.h,v 1.4 2006/03/08 23:46:25 lukem Exp $ */
/*
* Copyright (c) 2005 Brocade Communcations, inc.
* All rights reserved.
*
* Written by Matt Thomas for Brocade Communcations, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of Brocade Communications, Inc. may not be used to endorse
* or promote products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY BROCADE COMMUNICATIONS, INC. ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL EITHER BROCADE COMMUNICATIONS, INC. BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _DEV_MARVELL_GTI2CREG_H_
#define _DEV_MARVELL_GTI2CREG_H_
#define I2C_REG_SlaveAddr 0xc000
#define I2C_REG_ExtSlaveAddr 0xc010
#define I2C_REG_Data 0xc004
#define I2C_REG_Control 0xc008
#define I2C_REG_Status 0xc00c
#define I2C_REG_BaudRate 0xc00c
#define I2C_REG_SoftReset 0xc01c
#define I2C_SlaveAddr_GCE 0x0001 /* Act as Slave */
#define I2C_SlaveAddr_SAddr 0x7E
#define I2C_Control_ACK 0x04
#define I2C_Control_IFlg 0x08
#define I2C_Control_Stop 0x10
#define I2C_Control_Start 0x20
#define I2C_Control_TWSIEn 0x40
#define I2C_Control_IntEn 0x80
/*
* F(I2C) = F(Tclk) / ( 10 * (M + 1) * (2^(N+1)))
* For Tclk = 100 MHz, M = 4, N = 4: F = 62.5 kHz
* For Tclk = 100 MHz, M = 13, N = 3: F = 96.2 kHz
*/
#define I2C_BaudRate(M, N) (((M) << 3) | (N))
#define I2C_BaudRate_62_5K I2C_BaudRate(4, 4)
#define I2C_BaudRate_96_2K I2C_BaudRate(13, 3)
#define I2C_Status_BusError 0x00 /* Bus error */
#define I2C_Status_Started 0x08 /* Start condition xmitted */
#define I2C_Status_ReStarted 0x10 /* Repeated start condition xmitted */
#define I2C_Status_AddrWriteAck 0x18 /* Adr + wr bit xmtd, ack rcvd */
#define I2C_Status_AddrWriteNoAck 0x20 /* Adr + wr bit xmtd, NO ack rcvd */
#define I2C_Status_MasterWriteAck 0x28 /* Master xmtd data byte, ack rcvd */
#define I2C_Status_MasterWriteNoAck 0x30 /* Master xmtd data byte, NO ack rcvd*/
#define I2C_Status_MasterLostArb 0x38 /* Master lost arbitration during
address or data transfer */
#define I2C_Status_AddrReadAck 0x40 /* Adr + rd bit xmtd, ack rcvd */
#define I2C_Status_AddrReadNoAck 0x48 /* Adr + rd bit xmtd, NO ack rcvd */
#define I2C_Status_MasterReadAck 0x50 /* Master rcvd data bye, ack rcvd */
#define I2C_Status_MasterReadNoAck 0x58 /* Master rcvd data bye, NO ack rcvd */
#define I2C_Status_2ndAddrWriteAck 0xd0 /* 2nd adr + wr bit xmid, ack rcvd */
#define I2C_Status_2ndAddrWriteNoAck 0xd8 /* 2nd adr + wr bit xmid, NO ack rcvd */
#define I2C_Status_2ndAddrReadAck 0xe0 /* 2nd adr + rd bit xmid, ack rcvd */
#define I2C_Status_2ndAddrReadNoAck 0xe8 /* 2nd adr + rd bit xmtd, NO ack rcvd */
#define I2C_Status_Idle 0xf8 /* Idle */
#endif /* _DEV_MARVELL_GTI2CREG_H_ */