729 lines
19 KiB
C
729 lines
19 KiB
C
/* $NetBSD: ad1848_isa.c,v 1.13 1999/10/05 03:44:31 itohy Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1999 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Ken Hornstein and John Kohl.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the NetBSD
|
|
* Foundation, Inc. and its contributors.
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
/*
|
|
* Copyright (c) 1994 John Brezak
|
|
* Copyright (c) 1991-1993 Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the Computer Systems
|
|
* Engineering Group at Lawrence Berkeley Laboratory.
|
|
* 4. Neither the name of the University nor of the Laboratory may be used
|
|
* to endorse or promote products derived from this software without
|
|
* specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* Copyright by Hannu Savolainen 1994
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are
|
|
* met: 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer. 2.
|
|
* Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY
|
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*/
|
|
/*
|
|
* Portions of this code are from the VOXware support for the ad1848
|
|
* by Hannu Savolainen <hannu@voxware.pp.fi>
|
|
*
|
|
* Portions also supplied from the SoundBlaster driver for NetBSD.
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/syslog.h>
|
|
#include <sys/device.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/buf.h>
|
|
|
|
#include <machine/cpu.h>
|
|
#include <machine/bus.h>
|
|
|
|
#include <sys/audioio.h>
|
|
#include <vm/vm.h>
|
|
|
|
#include <dev/audio_if.h>
|
|
#include <dev/auconv.h>
|
|
|
|
#include <dev/isa/isavar.h>
|
|
#include <dev/isa/isadmavar.h>
|
|
|
|
#include <dev/ic/ad1848reg.h>
|
|
#include <dev/ic/cs4231reg.h>
|
|
#include <dev/ic/cs4237reg.h>
|
|
#include <dev/isa/ad1848var.h>
|
|
#include <dev/isa/cs4231var.h>
|
|
|
|
#ifdef AUDIO_DEBUG
|
|
#define DPRINTF(x) if (ad1848debug) printf x
|
|
extern int ad1848debug;
|
|
#else
|
|
#define DPRINTF(x)
|
|
#endif
|
|
|
|
static int ad1848_isa_read __P(( struct ad1848_softc *, int));
|
|
static void ad1848_isa_write __P(( struct ad1848_softc *, int, int));
|
|
|
|
int
|
|
ad1848_isa_read(sc, index)
|
|
struct ad1848_softc *sc;
|
|
int index;
|
|
{
|
|
return (bus_space_read_1(sc->sc_iot, sc->sc_ioh, index));
|
|
}
|
|
|
|
void
|
|
ad1848_isa_write(sc, index, value)
|
|
struct ad1848_softc *sc;
|
|
int index;
|
|
int value;
|
|
{
|
|
bus_space_write_1(sc->sc_iot, sc->sc_ioh, index, value);
|
|
}
|
|
|
|
/*
|
|
* Map and probe for the ad1848 chip
|
|
*/
|
|
int
|
|
ad1848_isa_mapprobe(isc, iobase)
|
|
struct ad1848_isa_softc *isc;
|
|
int iobase;
|
|
{
|
|
struct ad1848_softc *sc = &isc->sc_ad1848;
|
|
|
|
if (!AD1848_BASE_VALID(iobase)) {
|
|
#ifdef AUDIO_DEBUG
|
|
printf("ad1848: configured iobase %04x invalid\n", iobase);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/* Map the AD1848 ports */
|
|
if (bus_space_map(sc->sc_iot, iobase, AD1848_NPORT, 0, &sc->sc_ioh))
|
|
return 0;
|
|
|
|
if (!ad1848_isa_probe(isc)) {
|
|
bus_space_unmap(sc->sc_iot, sc->sc_ioh, AD1848_NPORT);
|
|
return 0;
|
|
} else
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Probe for the ad1848 chip
|
|
*/
|
|
int
|
|
ad1848_isa_probe(isc)
|
|
struct ad1848_isa_softc *isc;
|
|
{
|
|
struct ad1848_softc *sc = &isc->sc_ad1848;
|
|
u_char tmp, tmp1 = 0xff, tmp2 = 0xff;
|
|
int i;
|
|
|
|
sc->sc_readreg = ad1848_isa_read;
|
|
sc->sc_writereg = ad1848_isa_write;
|
|
|
|
/* Is there an ad1848 chip ? */
|
|
sc->MCE_bit = MODE_CHANGE_ENABLE;
|
|
sc->mode = 1; /* MODE 1 = original ad1848/ad1846/cs4248 */
|
|
|
|
/*
|
|
* Check that the I/O address is in use.
|
|
*
|
|
* The SP_IN_INIT bit of the base I/O port is known to be 0 after the
|
|
* chip has performed its power-on initialization. Just assume
|
|
* this has happened before the OS is starting.
|
|
*
|
|
* If the I/O address is unused, inb() typically returns 0xff.
|
|
*/
|
|
tmp = ADREAD(sc, AD1848_IADDR);
|
|
if (tmp & SP_IN_INIT) { /* Not a AD1848 */
|
|
DPRINTF(("ad_detect_A %x\n", tmp));
|
|
goto bad;
|
|
}
|
|
|
|
/*
|
|
* Test if it's possible to change contents of the indirect registers.
|
|
* Registers 0 and 1 are ADC volume registers. The bit 0x10 is read
|
|
* only so try to avoid using it. The bit 0x20 is the mic preamp
|
|
* enable; on some chips it is always the same in both registers, so
|
|
* we avoid tests where they are different.
|
|
*/
|
|
ad_write(sc, 0, 0x8a);
|
|
ad_write(sc, 1, 0x45); /* 0x55 with bit 0x10 clear */
|
|
tmp1 = ad_read(sc, 0);
|
|
tmp2 = ad_read(sc, 1);
|
|
|
|
if (tmp1 != 0x8a || tmp2 != 0x45) {
|
|
DPRINTF(("ad_detect_B (%x/%x)\n", tmp1, tmp2));
|
|
goto bad;
|
|
}
|
|
|
|
ad_write(sc, 0, 0x65);
|
|
ad_write(sc, 1, 0xaa);
|
|
tmp1 = ad_read(sc, 0);
|
|
tmp2 = ad_read(sc, 1);
|
|
|
|
if (tmp1 != 0x65 || tmp2 != 0xaa) {
|
|
DPRINTF(("ad_detect_C (%x/%x)\n", tmp1, tmp2));
|
|
goto bad;
|
|
}
|
|
|
|
/*
|
|
* The indirect register I12 has some read only bits. Lets
|
|
* try to change them.
|
|
*/
|
|
tmp = ad_read(sc, SP_MISC_INFO);
|
|
ad_write(sc, SP_MISC_INFO, (~tmp) & 0x0f);
|
|
|
|
if ((tmp & 0x0f) != ((tmp1 = ad_read(sc, SP_MISC_INFO)) & 0x0f)) {
|
|
DPRINTF(("ad_detect_D (%x)\n", tmp1));
|
|
goto bad;
|
|
}
|
|
|
|
/*
|
|
* MSB and 4 LSBs of the reg I12 tell the chip revision.
|
|
*
|
|
* A preliminary version of the AD1846 data sheet stated that it
|
|
* used an ID field of 0x0B. The current version, however,
|
|
* states that the AD1846 uses ID 0x0A, just like the AD1848K.
|
|
*
|
|
* this switch statement will need updating as newer clones arrive....
|
|
*/
|
|
switch (tmp1 & 0x8f) {
|
|
case 0x09:
|
|
sc->chip_name = "AD1848J";
|
|
break;
|
|
case 0x0A:
|
|
sc->chip_name = "AD1848K";
|
|
break;
|
|
#if 0 /* See above */
|
|
case 0x0B:
|
|
sc->chip_name = "AD1846";
|
|
break;
|
|
#endif
|
|
case 0x81:
|
|
sc->chip_name = "CS4248revB"; /* or CS4231 rev B; see below */
|
|
break;
|
|
case 0x89:
|
|
sc->chip_name = "CS4248";
|
|
break;
|
|
case 0x8A:
|
|
sc->chip_name = "broken"; /* CS4231/AD1845; see below */
|
|
break;
|
|
default:
|
|
sc->chip_name = "unknown";
|
|
DPRINTF(("ad1848: unknown codec version 0x%02x\n",
|
|
tmp1 & 0x8f));
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* The original AD1848/CS4248 has just 16 indirect registers. This
|
|
* means that I0 and I16 should return the same value (etc.).
|
|
* Ensure that the Mode2 enable bit of I12 is 0. Otherwise this test
|
|
* fails with CS4231, AD1845, etc.
|
|
*/
|
|
ad_write(sc, SP_MISC_INFO, 0); /* Mode2 = disabled */
|
|
|
|
for (i = 0; i < 16; i++)
|
|
if ((tmp1 = ad_read(sc, i)) != (tmp2 = ad_read(sc, i + 16))) {
|
|
if (i != SP_TEST_AND_INIT) {
|
|
DPRINTF(("ad_detect_F(%d/%x/%x)\n", i, tmp1, tmp2));
|
|
goto bad;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Try to switch the chip to mode2 (CS4231) by setting the MODE2 bit
|
|
* The bit 0x80 is always 1 in CS4248, CS4231, and AD1845.
|
|
*/
|
|
ad_write(sc, SP_MISC_INFO, MODE2); /* Set mode2, clear 0x80 */
|
|
|
|
tmp1 = ad_read(sc, SP_MISC_INFO);
|
|
if ((tmp1 & 0xc0) == (0x80 | MODE2)) {
|
|
/*
|
|
* CS4231 or AD1845 detected - is it?
|
|
*
|
|
* Verify that setting I2 doesn't change I18.
|
|
*/
|
|
ad_write(sc, 18, 0x88); /* Set I18 to known value */
|
|
|
|
ad_write(sc, 2, 0x45);
|
|
if ((tmp2 = ad_read(sc, 18)) != 0x45) { /* No change -> CS4231? */
|
|
ad_write(sc, 2, 0xaa);
|
|
if ((tmp2 = ad_read(sc, 18)) == 0xaa) { /* Rotten bits? */
|
|
DPRINTF(("ad_detect_H(%x)\n", tmp2));
|
|
goto bad;
|
|
}
|
|
|
|
sc->mode = 2;
|
|
|
|
/*
|
|
* It's a CS4231, or another clone with 32 registers.
|
|
* Let's find out which by checking I25.
|
|
*/
|
|
if ((tmp1 & 0x8f) == 0x8a) {
|
|
tmp1 = ad_read(sc, CS_VERSION_ID);
|
|
switch (tmp1 & 0xe7) {
|
|
case 0xA0:
|
|
sc->chip_name = "CS4231A";
|
|
break;
|
|
case 0x80:
|
|
/* XXX I25 no good, AD1845 same as CS4231 */
|
|
sc->chip_name = "CS4231 or AD1845";
|
|
break;
|
|
case 0x82:
|
|
sc->chip_name = "CS4232";
|
|
break;
|
|
case 0x03:
|
|
case 0x83:
|
|
sc->chip_name = "CS4236";
|
|
|
|
/*
|
|
* Try to switch to mode3 (CS4236B or
|
|
* CS4237B) by setting CMS to 3. A
|
|
* plain CS4236 will not react to
|
|
* LLBM settings.
|
|
*/
|
|
ad_write(sc, SP_MISC_INFO, MODE3);
|
|
|
|
tmp1 = ad_read(sc, CS_LEFT_LINE_CONTROL);
|
|
ad_write(sc, CS_LEFT_LINE_CONTROL, 0xe0);
|
|
tmp2 = ad_read(sc, CS_LEFT_LINE_CONTROL);
|
|
if (tmp2 == 0xe0) {
|
|
/*
|
|
* it's a CS4237B or another
|
|
* clone supporting mode 3.
|
|
* Let's determine which by
|
|
* enabling extended registers
|
|
* and checking X25.
|
|
*/
|
|
tmp2 = ad_xread(sc, CS_X_CHIP_VERSION);
|
|
switch (tmp2 & X_CHIP_VERSIONF_CID) {
|
|
case X_CHIP_CID_CS4236BB:
|
|
sc->chip_name = "CS4236BrevB";
|
|
break;
|
|
case X_CHIP_CID_CS4236B:
|
|
sc->chip_name = "CS4236B";
|
|
break;
|
|
case X_CHIP_CID_CS4237B:
|
|
sc->chip_name = "CS4237B";
|
|
break;
|
|
default:
|
|
sc->chip_name = "CS4236B compatible";
|
|
DPRINTF(("cs4236: unknown mode 3 compatible codec, version 0x%02x\n", tmp2));
|
|
break;
|
|
}
|
|
sc->mode = 3;
|
|
}
|
|
|
|
/* restore volume control information */
|
|
ad_write(sc, CS_LEFT_LINE_CONTROL, tmp1);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Wait for 1848 to init */
|
|
while(ADREAD(sc, AD1848_IADDR) & SP_IN_INIT)
|
|
;
|
|
|
|
/* Wait for 1848 to autocal */
|
|
ADWRITE(sc, AD1848_IADDR, SP_TEST_AND_INIT);
|
|
while(ADREAD(sc, AD1848_IDATA) & AUTO_CAL_IN_PROG)
|
|
;
|
|
|
|
return 1;
|
|
bad:
|
|
return 0;
|
|
}
|
|
|
|
/* Unmap the I/O ports */
|
|
void
|
|
ad1848_isa_unmap(isc)
|
|
struct ad1848_isa_softc *isc;
|
|
{
|
|
struct ad1848_softc *sc = &isc->sc_ad1848;
|
|
bus_space_unmap(sc->sc_iot, sc->sc_ioh, AD1848_NPORT);
|
|
}
|
|
|
|
/*
|
|
* Attach hardware to driver, attach hardware driver to audio
|
|
* pseudo-device driver .
|
|
*/
|
|
void
|
|
ad1848_isa_attach(isc)
|
|
struct ad1848_isa_softc *isc;
|
|
{
|
|
struct ad1848_softc *sc = &isc->sc_ad1848;
|
|
|
|
sc->sc_readreg = ad1848_isa_read;
|
|
sc->sc_writereg = ad1848_isa_write;
|
|
|
|
ad1848_attach(sc);
|
|
}
|
|
|
|
int
|
|
ad1848_isa_open(addr, flags)
|
|
void *addr;
|
|
int flags;
|
|
{
|
|
struct ad1848_isa_softc *isc = addr;
|
|
struct ad1848_softc *sc = &isc->sc_ad1848;
|
|
int error, state;
|
|
|
|
DPRINTF(("ad1848_isa_open: sc=%p\n", isc));
|
|
state = 0;
|
|
|
|
if (isc->sc_playdrq != -1) {
|
|
error = isa_dmamap_create(isc->sc_ic, isc->sc_playdrq,
|
|
MAX_ISADMA, BUS_DMA_NOWAIT);
|
|
if (error) {
|
|
printf("%s: can't create map for drq %d\n",
|
|
sc->sc_dev.dv_xname, isc->sc_playdrq);
|
|
goto bad;
|
|
}
|
|
state |= 1;
|
|
}
|
|
if (isc->sc_recdrq != -1 && isc->sc_recdrq != isc->sc_playdrq) {
|
|
error = isa_dmamap_create(isc->sc_ic, isc->sc_recdrq,
|
|
MAX_ISADMA, BUS_DMA_NOWAIT);
|
|
if (error) {
|
|
printf("%s: can't create map for drq %d\n",
|
|
sc->sc_dev.dv_xname, isc->sc_recdrq);
|
|
goto bad;
|
|
}
|
|
state |= 2;
|
|
}
|
|
|
|
#ifndef AUDIO_NO_POWER_CTL
|
|
/* Power-up chip */
|
|
if (isc->powerctl)
|
|
isc->powerctl(isc->powerarg, flags);
|
|
#endif
|
|
|
|
/* Init and mute wave output */
|
|
ad1848_mute_wave_output(sc, WAVE_MUTE2_INIT, 1);
|
|
|
|
error = ad1848_open(sc, flags);
|
|
if (error) {
|
|
#ifndef AUDIO_NO_POWER_CTL
|
|
if (isc->powerctl)
|
|
isc->powerctl(isc->powerarg, 0);
|
|
#endif
|
|
goto bad;
|
|
}
|
|
|
|
DPRINTF(("ad1848_isa_open: opened\n"));
|
|
return (0);
|
|
|
|
bad:
|
|
if (state & 1)
|
|
isa_dmamap_destroy(isc->sc_ic, isc->sc_playdrq);
|
|
if (state & 2)
|
|
isa_dmamap_destroy(isc->sc_ic, isc->sc_recdrq);
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Close function is called at splaudio().
|
|
*/
|
|
void
|
|
ad1848_isa_close(addr)
|
|
void *addr;
|
|
{
|
|
struct ad1848_isa_softc *isc = addr;
|
|
struct ad1848_softc *sc = &isc->sc_ad1848;
|
|
|
|
ad1848_isa_halt_output(isc);
|
|
ad1848_isa_halt_input(isc);
|
|
|
|
isc->sc_intr = 0;
|
|
|
|
if (isc->sc_playdrq != -1)
|
|
isa_dmamap_destroy(isc->sc_ic, isc->sc_playdrq);
|
|
if (isc->sc_recdrq != -1 && isc->sc_recdrq != isc->sc_playdrq)
|
|
isa_dmamap_destroy(isc->sc_ic, isc->sc_recdrq);
|
|
|
|
DPRINTF(("ad1848_isa_close: stop DMA\n"));
|
|
ad1848_close(sc);
|
|
|
|
#ifndef AUDIO_NO_POWER_CTL
|
|
/* Power-down chip */
|
|
if (isc->powerctl)
|
|
isc->powerctl(isc->powerarg, 0);
|
|
#endif
|
|
}
|
|
|
|
int
|
|
ad1848_isa_trigger_input(addr, start, end, blksize, intr, arg, param)
|
|
void *addr;
|
|
void *start, *end;
|
|
int blksize;
|
|
void (*intr) __P((void *));
|
|
void *arg;
|
|
struct audio_params *param;
|
|
{
|
|
struct ad1848_isa_softc *isc = addr;
|
|
struct ad1848_softc *sc = &isc->sc_ad1848;
|
|
u_int8_t reg;
|
|
|
|
isa_dmastart(isc->sc_ic, isc->sc_recdrq, start,
|
|
(char *)end - (char *)start, NULL,
|
|
DMAMODE_READ | DMAMODE_LOOPDEMAND, BUS_DMA_NOWAIT);
|
|
|
|
isc->sc_recrun = 1;
|
|
isc->sc_intr = intr;
|
|
isc->sc_arg = arg;
|
|
|
|
blksize = (blksize * 8) / (param->precision * param->factor * param->channels) - 1;
|
|
|
|
if (sc->mode >= 2) {
|
|
ad_write(sc, CS_LOWER_REC_CNT, blksize & 0xff);
|
|
ad_write(sc, CS_UPPER_REC_CNT, blksize >> 8);
|
|
} else {
|
|
ad_write(sc, SP_LOWER_BASE_COUNT, blksize & 0xff);
|
|
ad_write(sc, SP_UPPER_BASE_COUNT, blksize >> 8);
|
|
}
|
|
|
|
reg = ad_read(sc, SP_INTERFACE_CONFIG);
|
|
ad_write(sc, SP_INTERFACE_CONFIG, CAPTURE_ENABLE|reg);
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
ad1848_isa_trigger_output(addr, start, end, blksize, intr, arg, param)
|
|
void *addr;
|
|
void *start, *end;
|
|
int blksize;
|
|
void (*intr) __P((void *));
|
|
void *arg;
|
|
struct audio_params *param;
|
|
{
|
|
struct ad1848_isa_softc *isc = addr;
|
|
struct ad1848_softc *sc = &isc->sc_ad1848;
|
|
u_int8_t reg;
|
|
|
|
isa_dmastart(isc->sc_ic, isc->sc_playdrq, start,
|
|
(char *)end - (char *)start, NULL,
|
|
DMAMODE_WRITE | DMAMODE_LOOPDEMAND, BUS_DMA_NOWAIT);
|
|
|
|
isc->sc_playrun = 1;
|
|
isc->sc_intr = intr;
|
|
isc->sc_arg = arg;
|
|
|
|
blksize = (blksize * 8) / (param->precision * param->factor * param->channels) - 1;
|
|
|
|
ad_write(sc, SP_LOWER_BASE_COUNT, blksize & 0xff);
|
|
ad_write(sc, SP_UPPER_BASE_COUNT, blksize >> 8);
|
|
|
|
/* Unmute wave output */
|
|
ad1848_mute_wave_output(sc, WAVE_MUTE2, 0);
|
|
|
|
reg = ad_read(sc, SP_INTERFACE_CONFIG);
|
|
ad_write(sc, SP_INTERFACE_CONFIG, PLAYBACK_ENABLE|reg);
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
ad1848_isa_halt_input(addr)
|
|
void *addr;
|
|
{
|
|
struct ad1848_isa_softc *isc = addr;
|
|
struct ad1848_softc *sc = &isc->sc_ad1848;
|
|
|
|
if (isc->sc_recrun) {
|
|
ad1848_halt_input(sc);
|
|
isa_dmaabort(isc->sc_ic, isc->sc_recdrq);
|
|
isc->sc_recrun = 0;
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
ad1848_isa_halt_output(addr)
|
|
void *addr;
|
|
{
|
|
struct ad1848_isa_softc *isc = addr;
|
|
struct ad1848_softc *sc = &isc->sc_ad1848;
|
|
|
|
if (isc->sc_playrun) {
|
|
/* Mute wave output */
|
|
ad1848_mute_wave_output(sc, WAVE_MUTE2, 1);
|
|
|
|
ad1848_halt_output(sc);
|
|
isa_dmaabort(isc->sc_ic, isc->sc_playdrq);
|
|
isc->sc_playrun = 0;
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
ad1848_isa_intr(arg)
|
|
void *arg;
|
|
{
|
|
struct ad1848_isa_softc *isc = arg;
|
|
struct ad1848_softc *sc = &isc->sc_ad1848;
|
|
int retval = 0;
|
|
u_char status;
|
|
|
|
/* Get intr status */
|
|
status = ADREAD(sc, AD1848_STATUS);
|
|
|
|
#ifdef AUDIO_DEBUG
|
|
if (ad1848debug > 1)
|
|
printf("ad1848_isa_intr: intr=%p status=%x\n", isc->sc_intr, status);
|
|
#endif
|
|
isc->sc_interrupts++;
|
|
|
|
/* Handle interrupt */
|
|
if (isc->sc_intr && (status & INTERRUPT_STATUS)) {
|
|
(*isc->sc_intr)(isc->sc_arg);
|
|
retval = 1;
|
|
}
|
|
|
|
/* clear interrupt */
|
|
if (status & INTERRUPT_STATUS)
|
|
ADWRITE(sc, AD1848_STATUS, 0);
|
|
|
|
return(retval);
|
|
}
|
|
|
|
void *
|
|
ad1848_isa_malloc(addr, direction, size, pool, flags)
|
|
void *addr;
|
|
int direction;
|
|
size_t size;
|
|
int pool, flags;
|
|
{
|
|
struct ad1848_isa_softc *isc = addr;
|
|
int drq;
|
|
|
|
if (direction == AUMODE_PLAY)
|
|
drq = isc->sc_playdrq;
|
|
else
|
|
drq = isc->sc_recdrq;
|
|
return (isa_malloc(isc->sc_ic, drq, size, pool, flags));
|
|
}
|
|
|
|
void
|
|
ad1848_isa_free(addr, ptr, pool)
|
|
void *addr;
|
|
void *ptr;
|
|
int pool;
|
|
{
|
|
isa_free(ptr, pool);
|
|
}
|
|
|
|
size_t
|
|
ad1848_isa_round_buffersize(addr, direction, size)
|
|
void *addr;
|
|
int direction;
|
|
size_t size;
|
|
{
|
|
if (size > MAX_ISADMA)
|
|
size = MAX_ISADMA;
|
|
return (size);
|
|
}
|
|
|
|
int
|
|
ad1848_isa_mappage(addr, mem, off, prot)
|
|
void *addr;
|
|
void *mem;
|
|
int off;
|
|
int prot;
|
|
{
|
|
return isa_mappage(mem, off, prot);
|
|
}
|
|
|
|
int
|
|
ad1848_isa_get_props(addr)
|
|
void *addr;
|
|
{
|
|
struct ad1848_isa_softc *isc = addr;
|
|
|
|
return (AUDIO_PROP_MMAP |
|
|
(isc->sc_playdrq != isc->sc_recdrq ? AUDIO_PROP_FULLDUPLEX : 0));
|
|
}
|