NetBSD/sys/arch/arm32/podulebus/if_eareg.h

169 lines
5.4 KiB
C

/* $NetBSD: if_eareg.h,v 1.2 1996/03/18 21:23:09 mark Exp $ */
/*
* Copyright (c) 1995 Mark Brinicombe
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Mark Brinicombe.
* 4. The name of the company nor the name of the author may be used to
* endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* RiscBSD kernel project
*
* if_eareg.h
*
* Ether3 device driver
*
* Created : 08/07/95
*/
/*
* SEEQ 8005 Register Definitions
*/
#define EA_8005_BASE 0x000
/*
* SEEQ 8005 registers
*/
#define EA_8005_COMMAND 0x000
#define EA_8005_STATUS 0x000
#define EA_8005_CONFIG1 0x040
#define EA_8005_CONFIG2 0x080
#define EA_8005_RX_END 0x0c0
#define EA_8005_BUFWIN 0x100
#define EA_8005_RX_PTR 0x140
#define EA_8005_TX_PTR 0x180
#define EA_8005_DMA_ADDR 0x1c0
/* */
#define EA_CMD_DMA_INTEN (1 << 0)
#define EA_CMD_RX_INTEN (1 << 1)
#define EA_CMD_TX_INTEN (1 << 2)
#define EA_CMD_BW_INTEN (1 << 3)
#define EA_CMD_DMA_INTACK (1 << 4)
#define EA_CMD_RX_INTACK (1 << 5)
#define EA_CMD_TX_INTACK (1 << 6)
#define EA_CMD_BW_INTACK (1 << 7)
#define EA_CMD_DMA_ON (1 << 8)
#define EA_CMD_RX_ON (1 << 9)
#define EA_CMD_TX_ON (1 << 10)
#define EA_CMD_DMA_OFF (1 << 11)
#define EA_CMD_RX_OFF (1 << 12)
#define EA_CMD_TX_OFF (1 << 13)
#define EA_CMD_FIFO_READ (1 << 14)
#define EA_CMD_FIFO_WRITE (1 << 15)
#define EA_STATUS_DMA_INT (1 << 4)
#define EA_STATUS_RX_INT (1 << 5)
#define EA_STATUS_TX_INT (1 << 6)
#define EA_STATUS_RX_ON (1 << 9)
#define EA_STATUS_TX_ON (1 << 10)
#define EA_STATUS_FIFO_FULL (1 << 13)
#define EA_STATUS_FIFO_EMPTY (1 << 14)
#define EA_STATUS_FIFO_DIR (1 << 15)
#define EA_STATUS_FIFO_READ (1 << 15)
#define EA_CFG1_DMA_BURST_CONT 0x00
#define EA_CFG1_DMA_BURST_800 0x10
#define EA_CFG1_DMA_BURST_1600 0x20
#define EA_CFG1_DMA_BURST_3200 0x30
#define EA_CFG1_DMA_BSIZE_1 0x00
#define EA_CFG1_DMA_BSIZE_4 0x40
#define EA_CFG1_DMA_BSIZE_8 0x80
#define EA_CFG1_DMA_BSIZE_16 0xc0
#define EA_CFG1_STATION_ADDR0 (1 << 8)
#define EA_CFG1_STATION_ADDR1 (1 << 9)
#define EA_CFG1_STATION_ADDR2 (1 << 10)
#define EA_CFG1_STATION_ADDR3 (1 << 11)
#define EA_CFG1_STATION_ADDR4 (1 << 12)
#define EA_CFG1_STATION_ADDR5 (1 << 13)
#define EA_CFG1_SPECIFIC ((0 << 15) | (0 << 14))
#define EA_CFG1_BROADCAST ((0 << 15) | (1 << 14))
#define EA_CFG1_MULTICAST ((1 << 15) | (0 << 14))
#define EA_CFG1_PROMISCUOUS ((1 << 15) | (1 << 14))
#define EA_CFG2_BYTESWAP (1 << 0)
#define EA_CFG2_CRC_ERR_ENABLE (1 << 3)
#define EA_CFG2_DRIB_ERR_ENABLE (1 << 4)
#define EA_CFG2_PASS_SHORT (1 << 5)
#define EA_CFG2_SLOT_SELECT (1 << 6)
#define EA_CFG2_PREAM_SELECT (1 << 7)
#define EA_CFG2_ADDR_LENGTH (1 << 8)
#define EA_CFG2_RX_CRC (1 << 9)
#define EA_CFG2_NO_TX_CRC (1 << 10)
#define EA_CFG2_LOOPBACK (1 << 11)
#define EA_CFG2_OUTPUT (1 << 12)
#define EA_CFG2_RESET (1 << 15)
#define EA_BUFCODE_STATION_ADDR0 0x00
#define EA_BUFCODE_STATION_ADDR1 0x01
#define EA_BUFCODE_STATION_ADDR2 0x02
#define EA_BUFCODE_STATION_ADDR3 0x03
#define EA_BUFCODE_STATION_ADDR4 0x04
#define EA_BUFCODE_STATION_ADDR5 0x05
#define EA_BUFCODE_ADDRESS_PROM 0x06
#define EA_BUFCODE_TX_EAP 0x07
#define EA_BUFCODE_LOCAL_MEM 0x08
#define EA_BUFCODE_INT_VECTOR 0x09
/*#define EA_BUFCODE_MULTICAST 0x0f*/
#define EA_PKTHDR_TX (1 << 7)
#define EA_PKTHDR_RX (0 << 7)
#define EA_PKTHDR_CHAIN_CONT (1 << 6)
#define EA_PKTHDR_DATA_FOLLOWS (1 << 5)
#define EA_PKTHDR_DONE (1 << 7)
#define EA_TXHDR_BABBLE (1 << 0)
#define EA_TXHDR_COLLISION (1 << 1)
#define EA_TXHDR_COLLISION16 (1 << 2)
#define EA_TXHDR_BABBLE_INT (1 << 0)
#define EA_TXHDR_COLLISION_INT (1 << 1)
#define EA_TXHDR_COLLISION16_INT (1 << 2)
#define EA_TXHDR_XMIT_SUCCESS_INT (1 << 3)
#define EA_TXHDR_ERROR_MASK (0x07)
#define EA_RXHDR_OVERSIZE (1 << 0)
#define EA_RXHDR_CRC_ERROR (1 << 1)
#define EA_RXHDR_DRIBBLE_ERROR (1 << 2)
#define EA_RXHDR_SHORT_FRAME (1 << 3)
#define EA_BUFFER_SIZE 0x10000
#define EA_TX_BUFFER_SIZE 0x4000
#define EA_RX_BUFFER_SIZE 0xC000
/* Packet buffer size */
#define EA_BUFSIZ 2048
/* End of if_eareg.h */