166 lines
5.7 KiB
C
166 lines
5.7 KiB
C
/* $NetBSD: escreg.h,v 1.1 1996/10/15 00:05:06 mark Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1995 Daniel Widenfalk
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Daniel Widenfalk
|
|
* for the NetBSD Project.
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef _ESCREG_H_
|
|
#define _ESCREG_H_
|
|
|
|
/*
|
|
* AMD AM53CF94 SCSI interface hardware description.
|
|
*/
|
|
|
|
typedef volatile unsigned char vu_char;
|
|
|
|
typedef struct {
|
|
vu_char *esc_tc_low; /* rw: Transfer count low */
|
|
vu_char *esc_tc_mid; /* rw: Transfer count mid */
|
|
vu_char *esc_fifo; /* rw: Data FIFO */
|
|
vu_char *esc_command; /* rw: Chip command reg */
|
|
vu_char *esc_dest_id; /* w: (Re)select bus ID */
|
|
#define esc_status esc_dest_id /* r: Status */
|
|
vu_char *esc_timeout; /* w: (Re)select timeout */
|
|
#define esc_interrupt esc_timeout /* r: Interrupt */
|
|
vu_char *esc_syncper; /* w: Synch. transfer period */
|
|
#define esc_seqstep esc_syncper /* r: Sequence step */
|
|
vu_char *esc_syncoff; /* w: Synch. transfer offset */
|
|
#define esc_fifo_flags esc_syncoff /* r: FIFO flags */
|
|
vu_char *esc_config1; /* rw: Config register #1 */
|
|
vu_char *esc_clkconv; /* w: Clock conv. factor */
|
|
vu_char *esc_test; /* w: Test register */
|
|
vu_char *esc_config2; /* rw: Config register #2 */
|
|
vu_char *esc_config3; /* rw: Config register #3 */
|
|
vu_char *esc_config4; /* rw: Config register #4 */
|
|
vu_char *esc_tc_high; /* rw: Transfer count high */
|
|
vu_char *esc_fifo_bot; /* w: FIFO bottom register */
|
|
} esc_regmap_t;
|
|
typedef esc_regmap_t *esc_regmap_p;
|
|
|
|
/* Commands for the FAS216 */
|
|
#define ESC_CMD_DMA 0x80
|
|
|
|
#define ESC_CMD_SEL_NO_ATN 0x41
|
|
#define ESC_CMD_SEL_ATN 0x42
|
|
#define ESC_CMD_SEL_ATN3 0x46
|
|
#define ESC_CMD_SEL_ATN_STOP 0x43
|
|
|
|
#define ESC_CMD_ENABLE_RESEL 0x44
|
|
#define ESC_CMD_DISABLE_RESEL 0x45
|
|
|
|
#define ESC_CMD_TRANSFER_INFO 0x10
|
|
#define ESC_CMD_TRANSFER_PAD 0x98
|
|
|
|
#define ESC_CMD_COMMAND_COMPLETE 0x11
|
|
#define ESC_CMD_MESSAGE_ACCEPTED 0x12
|
|
|
|
#define ESC_CMD_SET_ATN 0x1A
|
|
#define ESC_CMD_RESET_ATN 0x1B
|
|
|
|
#define ESC_CMD_NOP 0x00
|
|
#define ESC_CMD_FLUSH_FIFO 0x01
|
|
#define ESC_CMD_RESET_CHIP 0x02
|
|
#define ESC_CMD_RESET_SCSI_BUS 0x03
|
|
|
|
#define ESC_STAT_PHASE_MASK 0x07
|
|
#define ESC_STAT_PHASE_TRANS_CPLT 0x08
|
|
#define ESC_STAT_TRANSFER_COUNT_ZERO 0x10
|
|
#define ESC_STAT_PARITY_ERROR 0x20
|
|
#define ESC_STAT_GROSS_ERROR 0x40
|
|
#define ESC_STAT_INTERRUPT_PENDING 0x80
|
|
|
|
#define ESC_PHASE_DATA_OUT 0
|
|
#define ESC_PHASE_DATA_IN 1
|
|
#define ESC_PHASE_COMMAND 2
|
|
#define ESC_PHASE_STATUS 3
|
|
#define ESC_PHASE_MESSAGE_OUT 6
|
|
#define ESC_PHASE_MESSAGE_IN 7
|
|
|
|
#define ESC_DEST_ID_MASK 0x07
|
|
|
|
#define ESC_INT_SELECTED 0x01
|
|
#define ESC_INT_SELECTED_WITH_ATN 0x02
|
|
#define ESC_INT_RESELECTED 0x04
|
|
#define ESC_INT_FUNCTION_COMPLETE 0x08
|
|
#define ESC_INT_BUS_SERVICE 0x10
|
|
#define ESC_INT_DISCONNECT 0x20
|
|
#define ESC_INT_ILLEGAL_COMMAND 0x40
|
|
#define ESC_INT_SCSI_RESET_DETECTED 0x80
|
|
|
|
#define ESC_SYNCHRON_PERIOD_MASK 0x1F
|
|
|
|
#define ESC_FIFO_COUNT_MASK 0x1F
|
|
#define ESC_FIFO_SEQUENCE_STEP_MASK 0xE0
|
|
#define ESC_FIFO_SEQUENCE_SHIFT 5
|
|
|
|
#define ESC_SYNCHRON_OFFSET_MASK 0x0F
|
|
#define ESC_SYNC_ASSERT_MASK 0x30
|
|
#define ESC_SYNC_ASSERT_SHIFT 4
|
|
#define ESC_SYNC_DEASSERT_MASK 0x30
|
|
#define ESC_SYNC_DEASSERT_SHIFT 6
|
|
|
|
#define ESC_CFG1_BUS_ID_MASK 0x07
|
|
#define ESC_CFG1_CHIP_TEST_MODE 0x08
|
|
#define ESC_CFG1_SCSI_PARITY_ENABLE 0x10
|
|
#define ESC_CFG1_PARITY_TEST_MODE 0x20
|
|
#define ESC_CFG1_SCSI_RES_INT_DIS 0x40
|
|
#define ESC_CFG1_SLOW_CABLE_MODE 0x80
|
|
|
|
#define ESC_CLOCK_CONVERSION_MASK 0x07
|
|
|
|
#define ESC_TEST_TARGET_TEST_MODE 0x01
|
|
#define ESC_TEST_INITIATOR_TEST_MODE 0x02
|
|
#define ESC_TEST_TRISTATE_TEST_MODE 0x04
|
|
|
|
#define ESC_CFG2_DMA_PARITY_ENABLE 0x01
|
|
#define ESC_CFG2_REG_PARITY_ENABLE 0x02
|
|
#define ESC_CFG2_TARG_BAD_PARITY_ABORT 0x04
|
|
#define ESC_CFG2_SCSI_2_MODE 0x08
|
|
#define ESC_CFG2_TRISTATE_DMA_REQ 0x10
|
|
#define ESC_CFG2_BYTE_CONTROL_MODE 0x20
|
|
#define ESC_CFG2_FEATURES_ENABLE 0x40
|
|
#define ESC_CFG2_RESERVE_FIFO_BYTE 0x80
|
|
|
|
#define ESC_CFG3_THRESHOLD_8_MODE 0x01
|
|
#define ESC_CFG3_ALTERNATE_DMA_MODE 0x02
|
|
#define ESC_CFG3_SAVE_RESIDUAL_BYTE 0x04
|
|
#define ESC_CFG3_FASTCLK 0x08
|
|
#define ESC_CFG3_FASTSCSI 0x10
|
|
#define ESC_CFG3_CDB10 0x20
|
|
#define ESC_CFG3_QENB 0x40
|
|
#define ESC_CFG3_IDRESCHK 0x80
|
|
|
|
#define ESC_CFG4_RADE 0x04
|
|
#define ESC_CFG4_RAE 0x08
|
|
#define ESC_CFG4_POWERDOWN 0x20
|
|
#define ESC_CFG4_GLITCH_EATER_0 0x40
|
|
#define ESC_CFG4_GLITCH_EATER_1 0x80
|
|
|
|
#endif
|