Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
cb7e3eae7c
NetBSD/sys/arch/atari/pci/pci_machdep.c
christos 95e1ffb156 merge ktrace-lwp.
2005-12-11 12:16:03 +00:00

717 lines
18 KiB
C
Raw Blame History

/* $NetBSD: pci_machdep.c,v 1.43 2005/12/11 12:16:59 christos Exp $ */
/*
* Copyright (c) 1996 Leo Weppelman. All rights reserved.
* Copyright (c) 1996, 1997 Christopher G. Demetriou. All rights reserved.
* Copyright (c) 1994 Charles M. Hannum. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Charles M. Hannum.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: pci_machdep.c,v 1.43 2005/12/11 12:16:59 christos Exp $");
#include "opt_mbtype.h"
#include <sys/types.h>
#include <sys/param.h>
#include <sys/time.h>
#include <sys/systm.h>
#include <sys/errno.h>
#include <sys/device.h>
#include <sys/malloc.h>
#define _ATARI_BUS_DMA_PRIVATE
#include <machine/bus.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <uvm/uvm_extern.h>
#include <machine/cpu.h>
#include <machine/iomap.h>
#include <machine/mfp.h>
#include <atari/atari/device.h>
#include <atari/pci/pci_vga.h>
/*
* Sizes of pci memory and I/O area.
*/
#define PCI_MEM_END 0x10000000 /* 256 MByte */
#define PCI_IO_END 0x10000000 /* 256 MByte */
/*
* We preserve some space at the begin of the pci area for 32BIT_1M
* devices and standard vga.
*/
#define PCI_MEM_START 0x00100000 /* 1 MByte */
#define PCI_IO_START 0x00004000 /* 16 kByte (some PCI cards allow only
I/O addresses up to 0xffff) */
/*
* PCI memory and IO should be aligned acording to this masks
*/
#define PCI_MACHDEP_IO_ALIGN_MASK 0xffffff00
#define PCI_MACHDEP_MEM_ALIGN_MASK 0xfffff000
/*
* Convert a PCI 'device' number to a slot number.
*/
#define DEV2SLOT(dev) (3 - dev)
/*
* Struct to hold the memory and I/O datas of the pci devices
*/
struct pci_memreg {
LIST_ENTRY(pci_memreg) link;
int dev;
pcitag_t tag;
pcireg_t reg, address, mask;
u_int32_t size;
u_int32_t csr;
};
typedef LIST_HEAD(pci_memreg_head, pci_memreg) PCI_MEMREG;
/*
* Entry points for PCI DMA. Use only the 'standard' functions.
*/
int _bus_dmamap_create __P((bus_dma_tag_t, bus_size_t, int, bus_size_t,
bus_size_t, int, bus_dmamap_t *));
struct atari_bus_dma_tag pci_bus_dma_tag = {
0,
#if defined(_ATARIHW_)
0x80000000, /* On the Hades, CPU memory starts here PCI-wise */
#else
0,
#endif
_bus_dmamap_create,
_bus_dmamap_destroy,
_bus_dmamap_load,
_bus_dmamap_load_mbuf,
_bus_dmamap_load_uio,
_bus_dmamap_load_raw,
_bus_dmamap_unload,
_bus_dmamap_sync,
};
int ataripcibusprint __P((void *auxp, const char *));
int pcibusmatch __P((struct device *, struct cfdata *, void *));
void pcibusattach __P((struct device *, struct device *, void *));
static void enable_pci_devices __P((void));
static void insert_into_list __P((PCI_MEMREG *head, struct pci_memreg *elem));
static int overlap_pci_areas __P((struct pci_memreg *p,
struct pci_memreg *self, u_int addr, u_int size, u_int what));
CFATTACH_DECL(pcib, sizeof(struct device),
pcibusmatch, pcibusattach, NULL, NULL);
/*
* We need some static storage to probe pci-busses for VGA cards during
* early console init.
*/
static struct atari_bus_space bs_storage[2]; /* 1 iot, 1 memt */
int
pcibusmatch(pdp, cfp, auxp)
struct device *pdp;
struct cfdata *cfp;
void *auxp;
{
static int nmatched = 0;
if (strcmp((char *)auxp, "pcib"))
return (0); /* Wrong number... */
if(atari_realconfig == 0)
return (1);
if (machineid & (ATARI_HADES|ATARI_MILAN)) {
/*
* Both Hades and Milan have only one pci bus
*/
if (nmatched)
return (0);
nmatched++;
return (1);
}
return (0);
}
void
pcibusattach(pdp, dp, auxp)
struct device *pdp, *dp;
void *auxp;
{
struct pcibus_attach_args pba;
pba.pba_pc = NULL;
pba.pba_bus = 0;
pba.pba_bridgetag = NULL;
pba.pba_flags = PCI_FLAGS_IO_ENABLED | PCI_FLAGS_MEM_ENABLED;
pba.pba_dmat = &pci_bus_dma_tag;
pba.pba_iot = leb_alloc_bus_space_tag(&bs_storage[0]);
pba.pba_memt = leb_alloc_bus_space_tag(&bs_storage[1]);
if ((pba.pba_iot == NULL) || (pba.pba_memt == NULL)) {
printf("leb_alloc_bus_space_tag failed!\n");
return;
}
pba.pba_iot->base = PCI_IO_PHYS;
pba.pba_memt->base = PCI_MEM_PHYS;
if (dp == NULL) {
/*
* Scan the bus for a VGA-card that we support. If we
* find one, try to initialize it to a 'standard' text
* mode (80x25).
*/
check_for_vga(pba.pba_iot, pba.pba_memt);
return;
}
enable_pci_devices();
#if defined(_ATARIHW_)
MFP2->mf_aer &= ~(0x27); /* PCI interrupts: HIGH -> LOW */
#endif
printf("\n");
config_found_ia(dp, "pcibus", &pba, ataripcibusprint);
}
int
ataripcibusprint(auxp, name)
void *auxp;
const char *name;
{
if(name == NULL)
return(UNCONF);
return(QUIET);
}
void
pci_attach_hook(parent, self, pba)
struct device *parent, *self;
struct pcibus_attach_args *pba;
{
}
/*
* Initialize the PCI-bus. The Atari-BIOS does not do this, so....
* We only disable all devices here. Memory and I/O enabling is done
* later at pcibusattach.
*/
void
init_pci_bus()
{
pci_chipset_tag_t pc = NULL; /* XXX */
pcitag_t tag;
pcireg_t csr;
int device, id, maxndevs;
tag = 0;
id = 0;
maxndevs = pci_bus_maxdevs(pc, 0);
for (device = 0; device < maxndevs; device++) {
tag = pci_make_tag(pc, 0, device, 0);
id = pci_conf_read(pc, tag, PCI_ID_REG);
if (id == 0 || id == 0xffffffff)
continue;
csr = pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG);
csr &= ~(PCI_COMMAND_MEM_ENABLE|PCI_COMMAND_IO_ENABLE);
csr &= ~PCI_COMMAND_MASTER_ENABLE;
pci_conf_write(pc, tag, PCI_COMMAND_STATUS_REG, csr);
}
}
/*
* insert a new element in an existing list that the ID's (size in struct
* pci_memreg) are sorted.
*/
static void
insert_into_list(head, elem)
PCI_MEMREG *head;
struct pci_memreg *elem;
{
struct pci_memreg *p, *q;
p = LIST_FIRST(head);
q = NULL;
for (; p != NULL && p->size < elem->size; q = p, p = LIST_NEXT(p, link));
if (q == NULL) {
LIST_INSERT_HEAD(head, elem, link);
} else {
LIST_INSERT_AFTER(q, elem, link);
}
}
/*
* Test if a new selected area overlaps with an already (probably preselected)
* pci area.
*/
static int
overlap_pci_areas(p, self, addr, size, what)
struct pci_memreg *p, *self;
u_int addr, size, what;
{
struct pci_memreg *q;
if (p == NULL)
return 0;
q = p;
while (q != NULL) {
if ((q != self) && (q->csr & what)) {
if ((addr >= q->address) && (addr < (q->address + q->size))) {
#ifdef DEBUG_PCI_MACHDEP
printf("\noverlap area dev %d reg 0x%02x with dev %d reg 0x%02x",
self->dev, self->reg, q->dev, q->reg);
#endif
return 1;
}
if ((q->address >= addr) && (q->address < (addr + size))) {
#ifdef DEBUG_PCI_MACHDEP
printf("\noverlap area dev %d reg 0x%02x with dev %d reg 0x%02x",
self->dev, self->reg, q->dev, q->reg);
#endif
return 1;
}
}
q = LIST_NEXT(q, link);
}
return 0;
}
/*
* Enable memory and I/O on pci devices. Care about already enabled devices
* (probabaly by the console driver).
*
* The idea behind the following code is:
* We build a by sizes sorted list of the requirements of the different
* pci devices. After that we choose the start addresses of that areas
* in such a way that they are placed as closed as possible together.
*/
static void
enable_pci_devices()
{
PCI_MEMREG memlist;
PCI_MEMREG iolist;
struct pci_memreg *p, *q;
int dev, reg, id, class;
pcitag_t tag;
pcireg_t csr, address, mask;
pci_chipset_tag_t pc;
int sizecnt, membase_1m;
pc = 0;
csr = 0;
tag = 0;
LIST_INIT(&memlist);
LIST_INIT(&iolist);
/*
* first step: go through all devices and gather memory and I/O
* sizes
*/
for (dev = 0; dev < pci_bus_maxdevs(pc,0); dev++) {
tag = pci_make_tag(pc, 0, dev, 0);
id = pci_conf_read(pc, tag, PCI_ID_REG);
if (id == 0 || id == 0xffffffff)
continue;
csr = pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG);
/*
* special case: if a display card is found and memory is enabled
* preserve 128k at 0xa0000 as vga memory.
* XXX: if a display card is found without being enabled, leave
* it alone! You will usually only create conflicts by enabeling
* it.
*/
class = pci_conf_read(pc, tag, PCI_CLASS_REG);
switch (PCI_CLASS(class)) {
case PCI_CLASS_PREHISTORIC:
case PCI_CLASS_DISPLAY:
if (csr & (PCI_COMMAND_MEM_ENABLE | PCI_COMMAND_MASTER_ENABLE)) {
p = (struct pci_memreg *)malloc(sizeof(struct pci_memreg),
M_TEMP, M_WAITOK);
memset(p, '\0', sizeof(struct pci_memreg));
p->dev = dev;
p->csr = csr;
p->tag = tag;
p->reg = 0; /* there is no register about this */
p->size = 0x20000; /* 128kByte */
p->mask = 0xfffe0000;
p->address = 0xa0000;
insert_into_list(&memlist, p);
}
else continue;
}
for (reg = PCI_MAPREG_START; reg < PCI_MAPREG_END; reg += 4) {
address = pci_conf_read(pc, tag, reg);
pci_conf_write(pc, tag, reg, 0xffffffff);
mask = pci_conf_read(pc, tag, reg);
pci_conf_write(pc, tag, reg, address);
if (mask == 0)
continue; /* Register unused */
p = (struct pci_memreg *)malloc(sizeof(struct pci_memreg),
M_TEMP, M_WAITOK);
memset(p, '\0', sizeof(struct pci_memreg));
p->dev = dev;
p->csr = csr;
p->tag = tag;
p->reg = reg;
p->mask = mask;
p->address = 0;
if (mask & PCI_MAPREG_TYPE_IO) {
p->size = PCI_MAPREG_IO_SIZE(mask);
/*
* Align IO if necessary
*/
if (p->size < PCI_MAPREG_IO_SIZE(PCI_MACHDEP_IO_ALIGN_MASK)) {
p->mask = PCI_MACHDEP_IO_ALIGN_MASK;
p->size = PCI_MAPREG_IO_SIZE(p->mask);
}
/*
* if I/O is already enabled (probably by the console driver)
* save the address in order to take care about it later.
*/
if (csr & PCI_COMMAND_IO_ENABLE)
p->address = address;
insert_into_list(&iolist, p);
} else {
p->size = PCI_MAPREG_MEM_SIZE(mask);
/*
* Align memory if necessary
*/
if (p->size < PCI_MAPREG_IO_SIZE(PCI_MACHDEP_MEM_ALIGN_MASK)) {
p->mask = PCI_MACHDEP_MEM_ALIGN_MASK;
p->size = PCI_MAPREG_MEM_SIZE(p->mask);
}
/*
* if memory is already enabled (probably by the console driver)
* save the address in order to take care about it later.
*/
if (csr & PCI_COMMAND_MEM_ENABLE)
p->address = address;
insert_into_list(&memlist, p);
if (PCI_MAPREG_MEM_TYPE(mask) == PCI_MAPREG_MEM_TYPE_64BIT)
reg++;
}
}
#if defined(_ATARIHW_)
/*
* Both interrupt pin & line are set to the device (== slot)
* number. This makes sense on the atari Hades because the
* individual slots are hard-wired to a specific MFP-pin.
*/
csr = (DEV2SLOT(dev) << PCI_INTERRUPT_PIN_SHIFT);
csr |= (DEV2SLOT(dev) << PCI_INTERRUPT_LINE_SHIFT);
pci_conf_write(pc, tag, PCI_INTERRUPT_REG, csr);
#else
/*
* On the Milan, we accept the BIOS's choice.
*/
#endif
}
/*
* second step: calculate the memory and I/O addresses beginning from
* PCI_MEM_START and PCI_IO_START. Care about already mapped areas.
*
* begin with memory list
*/
address = PCI_MEM_START;
sizecnt = 0;
membase_1m = 0;
p = LIST_FIRST(&memlist);
while (p != NULL) {
if (!(p->csr & PCI_COMMAND_MEM_ENABLE)) {
if (PCI_MAPREG_MEM_TYPE(p->mask) == PCI_MAPREG_MEM_TYPE_32BIT_1M) {
if (p->size > membase_1m)
membase_1m = p->size;
do {
p->address = membase_1m;
membase_1m += p->size;
} while (overlap_pci_areas(LIST_FIRST(&memlist), p, p->address,
p->size, PCI_COMMAND_MEM_ENABLE));
if (membase_1m > 0x00100000) {
/*
* Should we panic here?
*/
printf("\npcibus0: dev %d reg %d: memory not configured",
p->dev, p->reg);
p->reg = 0;
}
} else {
if (sizecnt && (p->size > sizecnt))
sizecnt = ((p->size + sizecnt) & p->mask) &
PCI_MAPREG_MEM_ADDR_MASK;
if (sizecnt > address) {
address = sizecnt;
sizecnt = 0;
}
do {
p->address = address + sizecnt;
sizecnt += p->size;
} while (overlap_pci_areas(LIST_FIRST(&memlist), p, p->address,
p->size, PCI_COMMAND_MEM_ENABLE));
if ((address + sizecnt) > PCI_MEM_END) {
/*
* Should we panic here?
*/
printf("\npcibus0: dev %d reg %d: memory not configured",
p->dev, p->reg);
p->reg = 0;
}
}
if (p->reg > 0) {
pci_conf_write(pc, p->tag, p->reg, p->address);
csr = pci_conf_read(pc, p->tag, PCI_COMMAND_STATUS_REG);
csr |= PCI_COMMAND_MEM_ENABLE | PCI_COMMAND_MASTER_ENABLE;
pci_conf_write(pc, p->tag, PCI_COMMAND_STATUS_REG, csr);
p->csr = csr;
}
}
p = LIST_NEXT(p, link);
}
/*
* now the I/O list
*/
address = PCI_IO_START;
sizecnt = 0;
p = LIST_FIRST(&iolist);
while (p != NULL) {
if (!(p->csr & PCI_COMMAND_IO_ENABLE)) {
if (sizecnt && (p->size > sizecnt))
sizecnt = ((p->size + sizecnt) & p->mask) &
PCI_MAPREG_IO_ADDR_MASK;
if (sizecnt > address) {
address = sizecnt;
sizecnt = 0;
}
do {
p->address = address + sizecnt;
sizecnt += p->size;
} while (overlap_pci_areas(LIST_FIRST(&iolist), p, p->address,
p->size, PCI_COMMAND_IO_ENABLE));
if ((address + sizecnt) > PCI_IO_END) {
/*
* Should we panic here?
*/
printf("\npcibus0: dev %d reg %d: io not configured",
p->dev, p->reg);
} else {
pci_conf_write(pc, p->tag, p->reg, p->address);
csr = pci_conf_read(pc, p->tag, PCI_COMMAND_STATUS_REG);
csr |= PCI_COMMAND_IO_ENABLE | PCI_COMMAND_MASTER_ENABLE;
pci_conf_write(pc, p->tag, PCI_COMMAND_STATUS_REG, csr);
p->csr = csr;
}
}
p = LIST_NEXT(p, link);
}
#ifdef DEBUG_PCI_MACHDEP
printf("\nI/O List:\n");
p = LIST_FIRST(&iolist);
while (p != NULL) {
printf("\ndev: %d, reg: 0x%02x, size: 0x%08x, addr: 0x%08x", p->dev,
p->reg, p->size, p->address);
p = LIST_NEXT(p, link);
}
printf("\nMemlist:");
p = LIST_FIRST(&memlist);
while (p != NULL) {
printf("\ndev: %d, reg: 0x%02x, size: 0x%08x, addr: 0x%08x", p->dev,
p->reg, p->size, p->address);
p = LIST_NEXT(p, link);
}
#endif
/*
* Free the lists
*/
p = LIST_FIRST(&iolist);
while (p != NULL) {
q = p;
LIST_REMOVE(q, link);
free(p, M_WAITOK);
p = LIST_FIRST(&iolist);
}
p = LIST_FIRST(&memlist);
while (p != NULL) {
q = p;
LIST_REMOVE(q, link);
free(p, M_WAITOK);
p = LIST_FIRST(&memlist);
}
}
pcitag_t
pci_make_tag(pc, bus, device, function)
pci_chipset_tag_t pc;
int bus, device, function;
{
return ((bus << 16) | (device << 11) | (function << 8));
}
void
pci_decompose_tag(pc, tag, bp, dp, fp)
pci_chipset_tag_t pc;
pcitag_t tag;
int *bp, *dp, *fp;
{
if (bp != NULL)
*bp = (tag >> 16) & 0xff;
if (dp != NULL)
*dp = (tag >> 11) & 0x1f;
if (fp != NULL)
*fp = (tag >> 8) & 0x7;
}
int
pci_intr_map(pa, ihp)
struct pci_attach_args *pa;
pci_intr_handle_t *ihp;
{
int line = pa->pa_intrline;
#if defined(_MILANHW_)
/*
* On the Hades, the 'pin' info is useless.
*/
{
int pin = pa->pa_intrpin;
if (pin == 0) {
/* No IRQ used. */
goto bad;
}
if (pin > PCI_INTERRUPT_PIN_MAX) {
printf("pci_intr_map: bad interrupt pin %d\n", pin);
goto bad;
}
}
#endif /* _MILANHW_ */
/*
* According to the PCI-spec, 255 means `unknown' or `no connection'.
* Interpret this as 'no interrupt assigned'.
*/
if (line == 255)
goto bad;
/*
* Values are pretty useless on the Hades since all interrupt
* lines for a card are tied together and hardwired to a
* specific TT-MFP I/O port.
* On the Milan, they are tied to the ICU.
*/
#if defined(_MILANHW_)
if (line >= 16) {
printf("pci_intr_map: bad interrupt line %d\n", line);
goto bad;
}
if (line == 2) {
printf("pci_intr_map: changed line 2 to line 9\n");
line = 9;
}
/* Assume line == 0 means unassigned */
if (line == 0)
goto bad;
#endif
*ihp = line;
return 0;
bad:
*ihp = -1;
return 1;
}
const char *
pci_intr_string(pc, ih)
pci_chipset_tag_t pc;
pci_intr_handle_t ih;
{
static char irqstr[8]; /* 4 + 2 + NULL + sanity */
if (ih == -1)
panic("pci_intr_string: bogus handle 0x%x", ih);
sprintf(irqstr, "irq %d", ih);
return (irqstr);
}
const struct evcnt *
pci_intr_evcnt(pc, ih)
pci_chipset_tag_t pc;
pci_intr_handle_t ih;
{
/* XXX for now, no evcnt parent reported */
return NULL;
}
Reference in New Issue View Git Blame Copy Permalink