379 lines
14 KiB
C
379 lines
14 KiB
C
/* $NetBSD: osiopreg.h,v 1.2 2003/02/18 16:37:48 tsutsui Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1990 The Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* Van Jacobson of Lawrence Berkeley Laboratory.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of
|
|
* California, Berkeley and its contributors.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @(#)siopreg.h 7.3 (Berkeley) 2/5/91
|
|
*/
|
|
|
|
/*
|
|
* NCR 53C710 SCSI interface hardware description.
|
|
*
|
|
* From the Mach scsi driver for the 53C710 and amiga siop driver
|
|
*/
|
|
|
|
/* byte lane definitions */
|
|
#if BYTE_ORDER == LITTLE_ENDIAN
|
|
#define BL0 0
|
|
#define BL1 1
|
|
#define BL2 2
|
|
#define BL3 3
|
|
#else
|
|
#define BL0 3
|
|
#define BL1 2
|
|
#define BL2 1
|
|
#define BL3 0
|
|
#endif
|
|
|
|
#define OSIOP_SCNTL0 (0x00+BL0) /* rw: SCSI control reg 0 */
|
|
#define OSIOP_SCNTL1 (0x00+BL1) /* rw: SCSI control reg 1 */
|
|
#define OSIOP_SDID (0x00+BL2) /* rw: SCSI destination ID */
|
|
#define OSIOP_SIEN (0x00+BL3) /* rw: SCSI interrupt enable */
|
|
|
|
#define OSIOP_SCID (0x04+BL0) /* rw: SCSI Chip ID reg */
|
|
#define OSIOP_SXFER (0x04+BL1) /* rw: SCSI Transfer reg */
|
|
#define OSIOP_SODL (0x04+BL2) /* rw: SCSI Output Data Latch */
|
|
#define OSIOP_SOCL (0x04+BL3) /* rw: SCSI Output Control Latch */
|
|
|
|
#define OSIOP_SFBR (0x08+BL0) /* ro: SCSI First Byte Received */
|
|
#define OSIOP_SIDL (0x08+BL1) /* ro: SCSI Input Data Latch */
|
|
#define OSIOP_SBDL (0x08+BL2) /* ro: SCSI Bus Data Lines */
|
|
#define OSIOP_SBCL (0x08+BL3) /* rw: SCSI Bus Control Lines */
|
|
|
|
#define OSIOP_DSTAT (0x0c+BL0) /* ro: DMA status */
|
|
#define OSIOP_SSTAT0 (0x0c+BL1) /* ro: SCSI status reg 0 */
|
|
#define OSIOP_SSTAT1 (0x0c+BL2) /* ro: SCSI status reg 1 */
|
|
#define OSIOP_SSTAT2 (0x0c+BL3) /* ro: SCSI status reg 2 */
|
|
|
|
#define OSIOP_DSA 0x10 /* rw: Data Structure Address */
|
|
|
|
#define OSIOP_CTEST0 (0x14+BL0) /* ro: Chip test register 0 */
|
|
#define OSIOP_CTEST1 (0x14+BL1) /* ro: Chip test register 1 */
|
|
#define OSIOP_CTEST2 (0x14+BL2) /* ro: Chip test register 2 */
|
|
#define OSIOP_CTEST3 (0x14+BL3) /* ro: Chip test register 3 */
|
|
|
|
#define OSIOP_CTEST4 (0x18+BL0) /* rw: Chip test register 4 */
|
|
#define OSIOP_CTEST5 (0x18+BL1) /* rw: Chip test register 5 */
|
|
#define OSIOP_CTEST6 (0x18+BL2) /* rw: Chip test register 6 */
|
|
#define OSIOP_CTEST7 (0x18+BL3) /* rw: Chip test register 7 */
|
|
|
|
#define OSIOP_TEMP 0x1c /* rw: Temporary Stack reg */
|
|
|
|
#define OSIOP_DFIFO (0x20+BL0) /* rw: DMA FIFO */
|
|
#define OSIOP_ISTAT (0x20+BL1) /* rw: Interrupt Status reg */
|
|
#define OSIOP_CTEST8 (0x20+BL2) /* rw: Chip test register 8 */
|
|
#define OSIOP_LCRC (0x20+BL3) /* rw: LCRC value */
|
|
|
|
#define OSIOP_DBC 0x24 /* rw: DMA Counter reg (longword) */
|
|
#define OSIOP_DBC0 (0x24+BL0) /* rw: DMA Byte Counter reg 0 */
|
|
#define OSIOP_DBC1 (0x24+BL1) /* rw: DMA Byte Counter reg 1 */
|
|
#define OSIOP_DBC2 (0x24+BL2) /* rw: DMA Byte Counter reg 2 */
|
|
#define OSIOP_DCMD (0x24+BL3) /* rw: DMA Command Register */
|
|
|
|
#define OSIOP_DNAD 0x28 /* rw: DMA Next Data Address */
|
|
|
|
#define OSIOP_DSP 0x2c /* rw: DMA SCRIPTS Pointer reg */
|
|
|
|
#define OSIOP_DSPS 0x30 /* rw: DMA SCRIPTS Pointer Save reg */
|
|
|
|
#define OSIOP_SCRATCH 0x34 /* rw: Scratch register */
|
|
|
|
#define OSIOP_DMODE (0x38+BL0) /* rw: DMA Mode reg */
|
|
#define OSIOP_DIEN (0x38+BL1) /* rw: DMA Interrupt Enable */
|
|
#define OSIOP_DWT (0x38+BL2) /* rw: DMA Watchdog Timer */
|
|
#define OSIOP_DCNTL (0x38+BL3) /* rw: DMA Control reg */
|
|
|
|
#define OSIOP_ADDER 0x3c /* ro: Adder Sum Output */
|
|
|
|
#define OSIOP_NREGS 0x40
|
|
|
|
|
|
/*
|
|
* Register defines
|
|
*/
|
|
|
|
/* Scsi control register 0 (scntl0) */
|
|
|
|
#define OSIOP_SCNTL0_ARB 0xc0 /* Arbitration mode */
|
|
#define OSIOP_ARB_SIMPLE 0x00
|
|
#define OSIOP_ARB_FULL 0xc0
|
|
#define OSIOP_SCNTL0_START 0x20 /* Start Sequence */
|
|
#define OSIOP_SCNTL0_WATN 0x10 /* (Select) With ATN */
|
|
#define OSIOP_SCNTL0_EPC 0x08 /* Enable Parity Checking */
|
|
#define OSIOP_SCNTL0_EPG 0x04 /* Enable Parity Generation */
|
|
#define OSIOP_SCNTL0_AAP 0x02 /* Assert ATN on Parity Error */
|
|
#define OSIOP_SCNTL0_TRG 0x01 /* Target Mode */
|
|
|
|
/* Scsi control register 1 (scntl1) */
|
|
|
|
#define OSIOP_SCNTL1_EXC 0x80 /* Extra Clock Cycle of data setup */
|
|
#define OSIOP_SCNTL1_ADB 0x40 /* Assert Data Bus */
|
|
#define OSIOP_SCNTL1_ESR 0x20 /* Enable Selection/Reselection */
|
|
#define OSIOP_SCNTL1_CON 0x10 /* Connected */
|
|
#define OSIOP_SCNTL1_RST 0x08 /* Assert RST */
|
|
#define OSIOP_SCNTL1_AESP 0x04 /* Assert even SCSI parity */
|
|
#define OSIOP_SCNTL1_PAR 0x04 /* Force bad Parity */
|
|
#define OSIOP_SCNTL1_RES0 0x02 /* Reserved */
|
|
#define OSIOP_SCNTL1_RES1 0x01 /* Reserved */
|
|
|
|
/* Scsi interrupt enable register (sien) */
|
|
|
|
#define OSIOP_SIEN_M_A 0x80 /* Phase Mismatch or ATN active */
|
|
#define OSIOP_SIEN_FCMP 0x40 /* Function Complete */
|
|
#define OSIOP_SIEN_STO 0x20 /* (Re)Selection timeout */
|
|
#define OSIOP_SIEN_SEL 0x10 /* (Re)Selected */
|
|
#define OSIOP_SIEN_SGE 0x08 /* SCSI Gross Error */
|
|
#define OSIOP_SIEN_UDC 0x04 /* Unexpected Disconnect */
|
|
#define OSIOP_SIEN_RST 0x02 /* RST asserted */
|
|
#define OSIOP_SIEN_PAR 0x01 /* Parity Error */
|
|
|
|
/* Scsi chip ID (scid) */
|
|
|
|
#define OSIOP_SCID_VALUE(i) (1 << (i))
|
|
|
|
/* Scsi transfer register (sxfer) */
|
|
|
|
#define OSIOP_SXFER_DHP 0x80 /* Disable Halt on Parity error/
|
|
ATN asserted */
|
|
#define OSIOP_SXFER_TP 0x70 /* Synch Transfer Period */
|
|
/* see specs for formulas:
|
|
Period = TCP * (4 + XFERP )
|
|
TCP = 1 + CLK + 1..2;
|
|
*/
|
|
#define OSIOP_SXFER_MO 0x0f /* Synch Max Offset */
|
|
#define OSIOP_MAX_OFFSET 8
|
|
|
|
/* Scsi output data latch register (sodl) */
|
|
|
|
/* Scsi output control latch register (socl) */
|
|
|
|
#define OSIOP_REQ 0x80 /* SCSI signal <x> asserted */
|
|
#define OSIOP_ACK 0x40
|
|
#define OSIOP_BSY 0x20
|
|
#define OSIOP_SEL 0x10
|
|
#define OSIOP_ATN 0x08
|
|
#define OSIOP_MSG 0x04
|
|
#define OSIOP_CD 0x02
|
|
#define OSIOP_IO 0x01
|
|
|
|
#define OSIOP_PHASE(x) ((x) & (OSIOP_MSG|OSIOP_CD|OSIOP_IO))
|
|
#define DATA_OUT_PHASE 0x00
|
|
#define DATA_IN_PHASE OSIOP_IO
|
|
#define COMMAND_PHASE OSIOP_CD
|
|
#define STATUS_PHASE (OSIOP_CD|OSIOP_IO)
|
|
#define MSG_OUT_PHASE (OSIOP_MSG|OSIOP_CD)
|
|
#define MSG_IN_PHASE (OSIOP_MSG|OSIOP_CD|OSIOP_IO)
|
|
|
|
/* Scsi first byte received register (sfbr) */
|
|
|
|
/* Scsi input data latch register (sidl) */
|
|
|
|
/* Scsi bus data lines register (sbdl) */
|
|
|
|
/* Scsi bus control lines register (sbcl). Same as socl */
|
|
|
|
#define OSIOP_SBCL_SSCF1 0x02 /* wo */
|
|
#define OSIOP_SBCL_SSCF0 0x01 /* wo */
|
|
|
|
/* DMA status register (dstat) */
|
|
|
|
#define OSIOP_DSTAT_DFE 0x80 /* DMA FIFO empty */
|
|
#define OSIOP_DSTAT_RES 0x40
|
|
#define OSIOP_DSTAT_BF 0x20 /* Bus fault */
|
|
#define OSIOP_DSTAT_ABRT 0x10 /* Aborted */
|
|
#define OSIOP_DSTAT_SSI 0x08 /* SCRIPT Single Step */
|
|
#define OSIOP_DSTAT_SIR 0x04 /* SCRIPT Interrupt Instruction */
|
|
#define OSIOP_DSTAT_WTD 0x02 /* Watchdog Timeout Detected */
|
|
#define OSIOP_DSTAT_IID 0x01 /* Invalid Instruction Detected */
|
|
|
|
/* Scsi status register 0 (sstat0) */
|
|
|
|
#define OSIOP_SSTAT0_M_A 0x80 /* Phase Mismatch or ATN active */
|
|
#define OSIOP_SSTAT0_FCMP 0x40 /* Function Complete */
|
|
#define OSIOP_SSTAT0_STO 0x20 /* (Re)Selection timeout */
|
|
#define OSIOP_SSTAT0_SEL 0x10 /* (Re)Selected */
|
|
#define OSIOP_SSTAT0_SGE 0x08 /* SCSI Gross Error */
|
|
#define OSIOP_SSTAT0_UDC 0x04 /* Unexpected Disconnect */
|
|
#define OSIOP_SSTAT0_RST 0x02 /* RST asserted */
|
|
#define OSIOP_SSTAT0_PAR 0x01 /* Parity Error */
|
|
|
|
/* Scsi status register 1 (sstat1) */
|
|
|
|
#define OSIOP_SSTAT1_ILF 0x80 /* Input latch (sidl) full */
|
|
#define OSIOP_SSTAT1_ORF 0x40 /* output reg (sodr) full */
|
|
#define OSIOP_SSTAT1_OLF 0x20 /* output latch (sodl) full */
|
|
#define OSIOP_SSTAT1_AIP 0x10 /* Arbitration in progress */
|
|
#define OSIOP_SSTAT1_LOA 0x08 /* Lost arbitration */
|
|
#define OSIOP_SSTAT1_WOA 0x04 /* Won arbitration */
|
|
#define OSIOP_SSTAT1_RST 0x02 /* SCSI RST current value */
|
|
#define OSIOP_SSTAT1_SDP 0x01 /* SCSI SDP current value */
|
|
|
|
/* Scsi status register 2 (sstat2) */
|
|
|
|
#define OSIOP_SSTAT2_FF 0xf0 /* SCSI FIFO flags (bytecount) */
|
|
#define OSIOP_SCSI_FIFO_DEEP 8
|
|
#define OSIOP_SSTAT2_SDP 0x08 /* Latched (on REQ) SCSI SDP */
|
|
#define OSIOP_SSTAT2_MSG 0x04 /* Latched SCSI phase */
|
|
#define OSIOP_SSTAT2_CD 0x02
|
|
#define OSIOP_SSTAT2_IO 0x01
|
|
|
|
/* Chip test register 0 (ctest0) */
|
|
|
|
#define OSIOP_CTEST0_RES0 0x80
|
|
#define OSIOP_CTEST0_BTD 0x40 /* Byte-to-byte Timer Disable */
|
|
#define OSIOP_CTEST0_GRP 0x20 /* Generate Receive Parity */
|
|
#define OSIOP_CTEST0_EAN 0x10 /* Enable Active Negation */
|
|
#define OSIOP_CTEST0_HSC 0x08 /* Halt SCSI clock */
|
|
#define OSIOP_CTEST0_ERF 0x04 /* Extend REQ/ACK Filtering */
|
|
#define OSIOP_CTEST0_RES1 0x02
|
|
#define OSIOP_CTEST0_DDIR 0x01 /* Xfer direction (1-> from SCSI bus) */
|
|
|
|
|
|
/* Chip test register 1 (ctest1) */
|
|
|
|
#define OSIOP_CTEST1_FMT 0xf0 /* Byte empty in DMA FIFO bottom
|
|
(high->byte3) */
|
|
#define OSIOP_CTEST1_FFL 0x0f /* Byte full in DMA FIFO top, same */
|
|
|
|
/* Chip test register 2 (ctest2) */
|
|
|
|
#define OSIOP_CTEST2_RES 0x80
|
|
#define OSIOP_CTEST2_SIGP 0x40 /* Signal process */
|
|
#define OSIOP_CTEST2_SOFF 0x20 /* Synch Offset compare
|
|
(1-> zero Init, max Tgt */
|
|
#define OSIOP_CTEST2_SFP 0x10 /* SCSI FIFO Parity */
|
|
#define OSIOP_CTEST2_DFP 0x08 /* DMA FIFO Parity */
|
|
#define OSIOP_CTEST2_TEOP 0x04 /* True EOP (a-la 5380) */
|
|
#define OSIOP_CTEST2_DREQ 0x02 /* DREQ status */
|
|
#define OSIOP_CTEST2_DACK 0x01 /* DACK status */
|
|
|
|
/* Chip test register 3 (ctest3) read-only, top of SCSI FIFO */
|
|
|
|
/* Chip test register 4 (ctest4) */
|
|
|
|
#define OSIOP_CTEST4_MUX 0x80 /* Host bus multiplex mode */
|
|
#define OSIOP_CTEST4_ZMOD 0x40 /* High-impedance outputs */
|
|
#define OSIOP_CTEST4_SZM 0x20 /* ditto, SCSI "outputs" */
|
|
#define OSIOP_CTEST4_SLBE 0x10 /* SCSI loobpack enable */
|
|
#define OSIOP_CTEST4_SFWR 0x08 /* SCSI FIFO write enable (from sodl) */
|
|
#define OSIOP_CTEST4_FBL 0x07 /* DMA FIFO Byte Lane select
|
|
(from ctest6) 4->0, .. 7->3 */
|
|
|
|
/* Chip test register 5 (ctest5) */
|
|
|
|
#define OSIOP_CTEST5_ADCK 0x80 /* Clock Address Incrementor */
|
|
#define OSIOP_CTEST5_BBCK 0x40 /* Clock Byte counter */
|
|
#define OSIOP_CTEST5_ROFF 0x20 /* Reset SCSI offset */
|
|
#define OSIOP_CTEST5_MASR 0x10 /* Master set/reset pulses
|
|
(of bits 3-0) */
|
|
#define OSIOP_CTEST5_DDIR 0x08 /* (re)set internal DMA direction */
|
|
#define OSIOP_CTEST5_EOP 0x04 /* (re)set internal EOP */
|
|
#define OSIOP_CTEST5_DREQ 0x02 /* (re)set internal REQ */
|
|
#define OSIOP_CTEST5_DACK 0x01 /* (re)set internal ACK */
|
|
|
|
/* Chip test register 6 (ctest6) DMA FIFO access */
|
|
|
|
/* Chip test register 7 (ctest7) */
|
|
|
|
#define OSIOP_CTEST7_CDIS 0x80 /* Cache burst disable */
|
|
#define OSIOP_CTEST7_SC1 0x40 /* Snoop control 1 */
|
|
#define OSIOP_CTEST7_SC0 0x20 /* Snoop contorl 0 */
|
|
#define OSIOP_CTEST7_STD 0x10 /* Selection timeout disable */
|
|
#define OSIOP_CTEST7_DFP 0x08 /* DMA FIFO parity bit */
|
|
#define OSIOP_CTEST7_EVP 0x04 /* Even parity (to host bus) */
|
|
#define OSIOP_CTEST7_TT1 0x02 /* Transfer type bit */
|
|
#define OSIOP_CTEST7_DIFF 0x01 /* Differential mode */
|
|
|
|
/* DMA FIFO register (dfifo) */
|
|
|
|
#define OSIOP_DFIFO_FLF 0x80 /* Flush (spill) DMA FIFO */
|
|
#define OSIOP_DFIFO_BO 0x7f /* FIFO byte offset counter */
|
|
|
|
/* Interrupt status register (istat) */
|
|
|
|
#define OSIOP_ISTAT_ABRT 0x80 /* Abort operation */
|
|
#define OSIOP_ISTAT_RST 0x40 /* Software reset */
|
|
#define OSIOP_ISTAT_SIGP 0x20 /* Signal process */
|
|
#define OSIOP_ISTAT_RES 0x10
|
|
#define OSIOP_ISTAT_CON 0x08 /* Connected */
|
|
#define OSIOP_ISTAT_RES1 0x04
|
|
#define OSIOP_ISTAT_SIP 0x02 /* SCSI Interrupt pending */
|
|
#define OSIOP_ISTAT_DIP 0x01 /* DMA Interrupt pending */
|
|
|
|
/* Chip test register 8 (ctest8) */
|
|
|
|
#define OSIOP_CTEST8_V 0xf0 /* Chip revision level */
|
|
#define OSIOP_CTEST8_FLF 0x08 /* Flush DMA FIFO */
|
|
#define OSIOP_CTEST8_CLF 0x04 /* Clear DMA and SCSI FIFOs */
|
|
#define OSIOP_CTEST8_FM 0x02 /* Fetch pin mode */
|
|
#define OSIOP_CTEST8_SM 0x01 /* Snoop pins mode */
|
|
|
|
/* DMA Mode register (dmode) */
|
|
|
|
#define OSIOP_DMODE_BL_MASK 0xc0 /* DMA burst length */
|
|
#define OSIOP_DMODE_BL8 0xc0 /* 8 bytes */
|
|
#define OSIOP_DMODE_BL4 0x80 /* 4 bytes */
|
|
#define OSIOP_DMODE_BL2 0x40 /* 2 bytes */
|
|
#define OSIOP_DMODE_BL1 0x00 /* 1 byte */
|
|
#define OSIOP_DMODE_FC 0x30 /* Function code */
|
|
#define OSIOP_DMODE_PD 0x08 /* Program/data */
|
|
#define OSIOP_DMODE_FAM 0x04 /* fixed address mode */
|
|
#define OSIOP_DMODE_U0 0x02 /* User programmable transfer type */
|
|
#define OSIOP_DMODE_MAN 0x01 /* SCRIPTS in Manual start mode */
|
|
|
|
/* DMA interrupt enable register (dien) */
|
|
|
|
#define OSIOP_DIEN_RES 0xc0
|
|
#define OSIOP_DIEN_BF 0x20 /* On Bus Fault */
|
|
#define OSIOP_DIEN_ABRT 0x10 /* On Abort */
|
|
#define OSIOP_DIEN_SSI 0x08 /* On SCRIPTS sstep */
|
|
#define OSIOP_DIEN_SIR 0x04 /* On SCRIPTS intr instruction */
|
|
#define OSIOP_DIEN_WTD 0x02 /* On watchdog timeout */
|
|
#define OSIOP_DIEN_IID 0x01 /* On illegal instruction detected */
|
|
|
|
/* DMA control register (dcntl) */
|
|
|
|
#define OSIOP_DCNTL_CF_MASK 0xc0 /* Clock frequency dividers: */
|
|
#define OSIOP_DCNTL_CF_2 0x00 /* 0 --> 37.51..50.00 MHz, div=2 */
|
|
#define OSIOP_DCNTL_CF_1_5 0x40 /* 1 --> 25.01..37.50 MHz, div=1.5 */
|
|
#define OSIOP_DCNTL_CF_1 0x80 /* 2 --> 16.67..25.00 MHz, div=1 */
|
|
#define OSIOP_DCNTL_CF_3 0xc0 /* 3 --> 50.01..66.67 MHz, div=3 */
|
|
#define OSIOP_DCNTL_EA 0x20 /* Enable ACK */
|
|
#define OSIOP_DCNTL_SSM 0x10 /* Single step mode */
|
|
#define OSIOP_DCNTL_LLM 0x08 /* Enable SCSI Low-level mode */
|
|
#define OSIOP_DCNTL_STD 0x04 /* Start DMA operation */
|
|
#define OSIOP_DCNTL_FA 0x02 /* Fast arbitration */
|
|
#define OSIOP_DCNTL_COM 0x01 /* 53C700 Compatibility */
|