NetBSD/sys/dev/ic/mb86960var.h

207 lines
6.8 KiB
C

/* $NetBSD: mb86960var.h,v 1.33 2003/02/05 12:03:54 tsutsui Exp $ */
/*
* All Rights Reserved, Copyright (C) Fujitsu Limited 1995
*
* This software may be used, modified, copied, distributed, and sold, in
* both source and binary form provided that the above copyright, these
* terms and the following disclaimer are retained. The name of the author
* and/or the contributor may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND THE CONTRIBUTOR ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR THE CONTRIBUTOR BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION.
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Portions copyright (C) 1993, David Greenman. This software may be used,
* modified, copied, distributed, and sold, in both source and binary form
* provided that the above copyright and these terms are retained. Under no
* circumstances is the author responsible for the proper functioning of this
* software, nor does the author assume any responsibility for damages
* incurred with its use.
*/
/*
* Device driver for Fujitsu MB86960A/MB86965A based Ethernet cards.
* Contributed by M.S. <seki@sysrap.cs.fujitsu.co.jp>
*
* This version is intended to be a generic template for various
* MB86960A/MB86965A based Ethernet cards. It currently supports
* Fujitsu FMV-180 series (i.e., FMV-181 and FMV-182) and Allied-
* Telesis AT1700 series and RE2000 series. There are some
* unnecessary hooks embedded, which are primarily intended to support
* other types of Ethernet cards, but the author is not sure whether
* they are useful.
*/
#include "rnd.h"
#if NRND > 0
#include <sys/rnd.h>
#endif
/*
* Default settings for fe driver specific options.
* They can be set in config file by "options" statements.
*/
/*
* Debug control.
* 0: No debug at all. All debug specific codes are stripped off.
* 1: Silent. No debug messages are logged except emergent ones.
* 2: Brief. Lair events and/or important information are logged.
* 3: Detailed. Logs all information which *may* be useful for debugging.
* 4: Trace. All actions in the driver is logged. Super verbose.
*/
#ifndef FE_DEBUG
#define FE_DEBUG 1
#endif
/*
* Delay padding of short transmission packets to minimum Ethernet size.
* This may or may not gain performance. An EXPERIMENTAL option.
*/
#ifndef FE_DELAYED_PADDING
#define FE_DELAYED_PADDING 0
#endif
/*
* Transmit just one packet per a "send" command to 86960.
* This option is intended for performance test. An EXPERIMENTAL option.
*/
#ifndef FE_SINGLE_TRANSMISSION
#define FE_SINGLE_TRANSMISSION 0
#endif
/*
* Device configuration flags.
*/
/* DLCR6 settings. */
#define FE_FLAGS_DLCR6_VALUE 0x007F
/* Force DLCR6 override. */
#define FE_FLAGS_OVERRIDE_DLCR6 0x0080
/*
* Supported hardware (Ethernet card) types
* This information is currently used only for debugging
*/
enum fe_type {
/* For cards which are successfully probed but not identified. */
FE_TYPE_UNKNOWN = 0,
/* Fujitsu FMV-180 series. */
FE_TYPE_FMV181,
FE_TYPE_FMV181A,
FE_TYPE_FMV182,
FE_TYPE_FMV182A,
FE_TYPE_FMV183,
FE_TYPE_FMV184,
/* Allied-Telesis AT1700 series and RE2000 series. */
FE_TYPE_AT1700T,
FE_TYPE_AT1700BT,
FE_TYPE_AT1700FT,
FE_TYPE_AT1700AT,
FE_TYPE_AT_UNKNOWN,
/* PCMCIA by Fujitsu. */
FE_TYPE_MBH10302,
FE_TYPE_MBH10304
};
/*
* fe_softc: per line info and status
*/
struct mb86960_softc {
struct device sc_dev;
struct ethercom sc_ec; /* ethernet common */
struct ifmedia sc_media; /* supported media information */
bus_space_tag_t sc_bst; /* bus space */
bus_space_handle_t sc_bsh;
/* Set by probe() and not modified in later phases. */
u_int32_t sc_flags; /* controller quirks */
#define FE_FLAGS_MB86960 0x0001 /* DLCR7 is differnt on MB86960 */
#define FE_FLAGS_SBW_BYTE 0x0002 /* byte access mode for system bus */
#define FE_FLAGS_SRAM_150ns 0x0004 /* The board has slow SRAM */
u_int8_t proto_dlcr4; /* DLCR4 prototype. */
u_int8_t proto_dlcr5; /* DLCR5 prototype. */
u_int8_t proto_dlcr6; /* DLCR6 prototype. */
u_int8_t proto_dlcr7; /* DLCR7 prototype. */
u_int8_t proto_bmpr13; /* BMPR13 prototype. */
/* Vendor specific hooks. */
void (*init_card) __P((struct mb86960_softc *));
void (*stop_card) __P((struct mb86960_softc *));
/* Transmission buffer management. */
int txb_size; /* total bytes in TX buffer */
int txb_free; /* free bytes in TX buffer */
int txb_count; /* number of packets in TX buffer */
int txb_sched; /* number of scheduled packets */
int txb_padding; /* number of delayed padding bytes */
/* Multicast address filter management. */
int filter_change; /* MARs must be changed ASAP. */
u_int8_t filter[FE_FILTER_LEN]; /* new filter value. */
u_int8_t sc_enaddr[ETHER_ADDR_LEN];
#if NRND > 0
rndsource_element_t rnd_source;
#endif
u_int32_t sc_stat; /* driver status */
#define FE_STAT_ENABLED 0x0001 /* power enabled on interface */
#define FE_STAT_ATTACHED 0x0002 /* attach has succeeded */
int (*sc_enable) __P((struct mb86960_softc *));
void (*sc_disable) __P((struct mb86960_softc *));
int (*sc_mediachange) __P((struct mb86960_softc *));
void (*sc_mediastatus) __P((struct mb86960_softc *,
struct ifmediareq *));
};
/*
* Fe driver specific constants which relate to 86960/86965.
*/
/* Interrupt masks. */
#define FE_TMASK (FE_D2_COLL16 | FE_D2_TXDONE)
#define FE_RMASK (FE_D3_OVRFLO | FE_D3_CRCERR | \
FE_D3_ALGERR | FE_D3_SRTPKT | FE_D3_PKTRDY)
/* Maximum number of iterrations for a receive interrupt. */
#define FE_MAX_RECV_COUNT ((65536 - 2048 * 2) / 64)
/* Maximum size of SRAM is 65536,
* minimum size of transmission buffer in fe is 2x2KB,
* and minimum amount of received packet including headers
* added by the chip is 64 bytes.
* Hence FE_MAX_RECV_COUNT is the upper limit for number
* of packets in the receive buffer. */
void mb86960_attach __P((struct mb86960_softc *, u_int8_t *));
void mb86960_config __P((struct mb86960_softc *, int *, int, int));
int mb86960_intr __P((void *));
int mb86960_enable __P((struct mb86960_softc *));
void mb86960_disable __P((struct mb86960_softc *));
int mb86960_activate __P((struct device *, enum devact));
int mb86960_detach __P((struct mb86960_softc *));
void mb86965_read_eeprom __P((bus_space_tag_t, bus_space_handle_t,
u_int8_t *));