156 lines
5.5 KiB
C
156 lines
5.5 KiB
C
/* $NetBSD: rtl80x9reg.h,v 1.7 2008/04/28 20:23:51 martin Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1998 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
|
|
* NASA Ames Research Center.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Registers on Realtek 8019 and 8029 NE2000-compatible network interfaces.
|
|
*
|
|
* Data sheets for these chips can be found at:
|
|
*
|
|
* http://www.realtek.com.tw
|
|
*/
|
|
|
|
#ifndef _DEV_IC_RTL80x9_REG_H_
|
|
#define _DEV_IC_RTL80x9_REG_H_
|
|
|
|
/*
|
|
* Page 0 register offsets.
|
|
*/
|
|
#define NERTL_RTL0_8019ID0 0x0a /* 8019 ID Register 0 */
|
|
#define RTL0_8019ID0 'P'
|
|
|
|
#define NERTL_RTL0_8019ID1 0x0b /* 8019 ID Register 1 */
|
|
#define RTL0_8019ID1 'p'
|
|
|
|
/*
|
|
* Page 3 register offsets.
|
|
*/
|
|
#define NERTL_RTL3_EECR 0x01 /* EEPROM Command Register */
|
|
#define RTL3_EECR_EEM1 0x80 /* EEPROM Operating Mode */
|
|
#define RTL3_EECR_EEM0 0x40
|
|
/* 0 0 Normal operation */
|
|
/* 0 1 Auto-load */
|
|
/* 1 0 9346 programming */
|
|
/* 1 1 Config register write enab */
|
|
#define RTL3_EECR_EECS 0x08 /* EEPROM Chip Select */
|
|
#define RTL3_EECR_EESK 0x04 /* EEPROM Clock */
|
|
#define RTL3_EECR_EEDI 0x02 /* EEPROM Data In */
|
|
#define RTL3_EECR_EEDO 0x01 /* EEPROM Data Out */
|
|
|
|
#define NERTL_RTL3_BPAGE 0x02 /* BROM Page Register (8019) */
|
|
|
|
#define NERTL_RTL3_CONFIG0 0x03 /* Configuration 0 (ro) */
|
|
#define RTL3_CONFIG0_JP 0x08 /* jumper mode (8019) */
|
|
#define RTL3_CONFIG0_BNC 0x04 /* BNC is active */
|
|
|
|
#define NERTL_RTL3_CONFIG1 0x04 /* Configuration 1 (8019) */
|
|
#define RTL3_CONFIG1_IRQEN 0x80 /* IRQ Enable */
|
|
#define RTL3_CONFIG1_IRQS2 0x40 /* IRQ Select */
|
|
#define RTL3_CONFIG1_IRQS1 0x20
|
|
#define RTL3_CONFIG1_IRQS0 0x10
|
|
/* 0 0 0 int 0 irq 2/9 */
|
|
/* 0 0 1 int 1 irq 3 */
|
|
/* 0 1 0 int 2 irq 4 */
|
|
/* 0 1 1 int 3 irq 5 */
|
|
/* 1 0 0 int 4 irq 10 */
|
|
/* 1 0 1 int 5 irq 11 */
|
|
/* 1 1 0 int 6 irq 12 */
|
|
/* 1 1 1 int 7 irq 15 */
|
|
#define RTL_CONFIG1_IOS3 0x08 /* I/O base Select */
|
|
#define RTL_CONFIG1_IOS2 0x04
|
|
#define RTL_CONFIG1_IOS1 0x02
|
|
#define RTL_CONFIG1_IOS0 0x01
|
|
/* 0 0 0 0 0x300 */
|
|
/* 0 0 0 1 0x320 */
|
|
/* 0 0 1 0 0x340 */
|
|
/* 0 0 1 1 0x360 */
|
|
/* 0 1 0 0 0x380 */
|
|
/* 0 1 0 1 0x3a0 */
|
|
/* 0 1 1 0 0x3c0 */
|
|
/* 0 1 1 1 0x3e0 */
|
|
/* 1 0 0 0 0x200 */
|
|
/* 1 0 0 1 0x220 */
|
|
/* 1 0 1 0 0x240 */
|
|
/* 1 0 1 1 0x260 */
|
|
/* 1 1 0 0 0x280 */
|
|
/* 1 1 0 1 0x2a0 */
|
|
/* 1 1 1 0 0x2c0 */
|
|
/* 1 1 1 1 0x2e0 */
|
|
|
|
#define NERTL_RTL3_CONFIG2 0x05 /* Configuration 2 */
|
|
#define RTL3_CONFIG2_PL1 0x80 /* Network media type */
|
|
#define RTL3_CONFIG2_PL0 0x40
|
|
/* 0 0 TP/CX auto-detect */
|
|
/* 0 1 10baseT */
|
|
/* 1 0 10base5 */
|
|
/* 1 1 10base2 */
|
|
#define RTL3_CONFIG2_8029FCE 0x20 /* Flow Control Enable */
|
|
#define RTL3_CONFIG2_8029PF 0x10 /* Pause Flag */
|
|
#define RTL3_CONFIG2_8029BS1 0x02 /* Boot Rom Size */
|
|
#define RTL3_CONFIG2_8029BS0 0x01
|
|
/* 0 0 No Boot Rom */
|
|
/* 0 1 8k */
|
|
/* 1 0 16k */
|
|
/* 1 1 32k */
|
|
#define RTL3_CONFIG2_8019BSELB 0x20 /* BROM disable */
|
|
#define RTL3_CONFIG2_8019BS4 0x10 /* BROM size/base */
|
|
#define RTL3_CONFIG2_8019BS3 0x08
|
|
#define RTL3_CONFIG2_8019BS2 0x04
|
|
#define RTL3_CONFIG2_8019BS1 0x02
|
|
#define RTL3_CONFIG2_8019BS0 0x01
|
|
|
|
#define NERTL_RTL3_CONFIG3 0x06 /* Configuration 3 */
|
|
#define RTL3_CONFIG3_8019PNP 0x80 /* PnP Mode */
|
|
#define RTL3_CONFIG3_FUDUP 0x40 /* Full Duplex */
|
|
#define RTL3_CONFIG3_LEDS1 0x20 /* LED1/2 pin configuration */
|
|
/* 0 LED1 == LED_RX, LED2 == LED_TX */
|
|
/* 1 LED1 == LED_CRS, LED2 == MCSB */
|
|
#define RTL3_CONFIG3_LEDS0 0x10 /* LED0 pin configuration */
|
|
/* 0 LED0 pin == LED_COL */
|
|
/* 1 LED0 pin == LED_LINK */
|
|
#define RTL3_CONFIG3_SLEEP 0x04 /* Sleep mode */
|
|
#define RTL3_CONFIG3_PWRDN 0x02 /* Power Down */
|
|
#define RTL3_CONFIG3_8019ACTIVEB 0x01 /* inverse of bit 0 in PnP Act Reg */
|
|
|
|
#define NERTL_RTL3_CSNSAV 0x08 /* CSN Save Register (8019) */
|
|
|
|
#define NERTL_RTL3_HLTCLK 0x09 /* Halt Clock */
|
|
#define RTL3_HLTCLK_RUNNING 'R' /* clock runs in power down */
|
|
#define RTL3_HLTCLK_HALTED 'H' /* clock halted in power down */
|
|
|
|
#define NERTL_RTL3_INTR 0x0b /* ISA bus states of INT7-0 (8019) */
|
|
|
|
#define NERTL_RTL3_8029ID0 0x0e /* ID register 0 */
|
|
|
|
#define NERTL_RTL3_8029ID1 0x0f /* ID register 1 */
|
|
|
|
#endif /* _DEV_IC_RTL80x9_REG_H_ */
|