520 lines
13 KiB
Plaintext
520 lines
13 KiB
Plaintext
.\" $NetBSD: install,v 1.29 2001/08/26 12:08:07 simonb Exp $
|
|
.\"
|
|
.\" Copyright (c) 1999, 2000 The NetBSD Foundation, Inc.
|
|
.\" All rights reserved.
|
|
.\"
|
|
.\" Redistribution and use in source and binary forms, with or without
|
|
.\" modification, are permitted provided that the following conditions
|
|
.\" are met:
|
|
.\" 1. Redistributions of source code must retain the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer.
|
|
.\" 2. Redistributions in binary form must reproduce the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer in the
|
|
.\" documentation and/or other materials provided with the distribution.
|
|
.\" 3. All advertising materials mentioning features or use of this software
|
|
.\" must display the following acknowledgement:
|
|
.\" This product includes software developed by the NetBSD
|
|
.\" Foundation, Inc. and its contributors.
|
|
.\" 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
.\" contributors may be used to endorse or promote products derived
|
|
.\" from this software without specific prior written permission.
|
|
.\"
|
|
.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
.\" PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
.\" POSSIBILITY OF SUCH DAMAGE.
|
|
.\"
|
|
.
|
|
.(Note
|
|
There may be updates to this procedure available from the
|
|
.Nx*M
|
|
web page, at
|
|
.Lk http://www.netbsd.org/Ports/\*M .
|
|
.Note)
|
|
.Pp
|
|
To install or upgrade
|
|
.Nx ,
|
|
you need to first boot an installation
|
|
program and then interact with the screen-menu program
|
|
.Ic sysinst .
|
|
The installation program actually consists of the
|
|
.Nx
|
|
kernel plus
|
|
an in-memory file system of utility programs.
|
|
.Pp
|
|
From most convenient to least convenient, the installation methods
|
|
are:
|
|
.(enum
|
|
Installation from an existing
|
|
.Nx
|
|
or
|
|
.Tn Ultrix
|
|
system by booting the
|
|
install kernel from an existing root file system
|
|
.Pq Pa / .
|
|
See the
|
|
.Sx Installing from an existing system
|
|
section later in these INSTALL notes.
|
|
.It
|
|
Copying a bootable diskimage onto the beginning of a disk and installing
|
|
onto that disk. See the
|
|
.Sx Install via diskimage
|
|
section later in these INSTALL notes.
|
|
.It
|
|
Booting the install kernel over the network and installing onto a local
|
|
disk. See the
|
|
.Sx Install via netboot install kernel
|
|
section later in these INSTALL notes.
|
|
.It
|
|
Using a helper machine with a SCSI controller to copy the bootable
|
|
diskimage onto the beginning of a disk, and moving the disk to the
|
|
target machine. See the
|
|
.Sx Install via diskimage
|
|
section later in these INSTALL notes.
|
|
.It
|
|
For machines with some PROMs that cannot netboot standard kernels, you
|
|
will need to set up an NFS server with a diskless root file system for
|
|
trimmed-down network install kernel and run the installation system from
|
|
the NFS root file system. See the
|
|
.Sx Install via diskless boot
|
|
section later in these INSTALL notes.
|
|
.enum)
|
|
.Pp
|
|
You should familiarize yourself with the console PROM environment
|
|
and the hardware configuration. The PROMs on the older DECstation
|
|
2100 and 3100 use one syntax. The PROMs on the TurboChannel machines
|
|
use a completely different syntax. Be sure you know how to print
|
|
the configuration of your machine, and how to boot from disk or
|
|
network, as appropriate.
|
|
.Pp
|
|
To boot from disk, use:
|
|
.Pp
|
|
.(tag 12n -offset indent -compact
|
|
.It "2100 or 3100:"
|
|
.Ic "boot -f rz(0," Ns Ar X Ns Ic ",0)netbsd"
|
|
.It "5000/200:"
|
|
.Ic "boot 5/rz" Ns Ar X Ns Ic "/netbsd"
|
|
.It "other 5000s:"
|
|
.Ic "boot 3/rz" Ns Ar X Ns Ic "/netbsd"
|
|
.tag)
|
|
.Pp
|
|
To boot via TFTP, use:
|
|
.Pp
|
|
.(tag 12n -offset indent -compact
|
|
.It "2100 or 3100:"
|
|
.Ic "boot -f tftp()"
|
|
.It "5000/200:"
|
|
.Ic "boot 6/tftp"
|
|
.It "other 5000s:"
|
|
.Ic "boot 3/tftp"
|
|
.tag)
|
|
.Pp
|
|
To boot via MOP, use:
|
|
.Pp
|
|
.(tag 12n -offset indent -compact
|
|
.It "2100 or 3100:"
|
|
.Ic "boot -f mop()"
|
|
.It "5000/200:"
|
|
.Ic "boot 6/mop"
|
|
.It "other 5000s:"
|
|
.Ic "boot 3/mop"
|
|
.tag)
|
|
.Pp
|
|
You will also need to know the total size (in sectors) and the
|
|
approximate geometry of the disks you are installing onto, so that you
|
|
can label your disks for the
|
|
.Bx
|
|
fast file system (FFS). For most SCSI
|
|
drives (including all SCSI-2 drives), the kernel will correctly detect
|
|
the disk geometry. The
|
|
.Ic sysinst
|
|
tool will suggest these as the default.
|
|
.Pp
|
|
If you're installing
|
|
.Nx*M
|
|
for the first time it's a very
|
|
good idea to pre-plan partition sizes for the disks on which you're
|
|
installing
|
|
.Nx .
|
|
Changing the size of partitions after you've
|
|
installed is difficult. If you do not have a spare bootable disk, it
|
|
may be simpler to re-install
|
|
.Nx
|
|
again from scratch.
|
|
.Pp
|
|
Assuming a classic partition scheme with separate
|
|
.Pa /
|
|
(root)
|
|
and
|
|
.Pa /usr
|
|
file systems, a comfortable size for the
|
|
.Nx
|
|
.Pa /
|
|
partition is about 32 MB.
|
|
A good initial size for the swap partition is twice the
|
|
amount of physical memory in your machine (though, unlike
|
|
.Tn Ultrix ,
|
|
there are no restrictions on the size of the swap partition that would render
|
|
part of your memory unusable). The default swap size is 64 MB, which
|
|
is adequate for doing a full system build. A full binary installation,
|
|
with X11R6.3 takes about 150 MB in
|
|
.Pa /usr ;
|
|
a 200 MB
|
|
.Pa /usr
|
|
should be ample.
|
|
.
|
|
.Ss2 Install via a NetBSD CD-ROM
|
|
.
|
|
You can obtain the disk image or diskless boot tar file from the
|
|
.Nx \*V
|
|
.Tn CD-ROM .
|
|
.Pp
|
|
To mount the CD-ROM from a
|
|
.Nx*M
|
|
host, type
|
|
.Pp
|
|
.Dl # Ic "mount -r -t cd9660 /dev/cd" Ns Ar X Ns Ic " c /mnt"
|
|
.Pp
|
|
and from an
|
|
.Tn Ultrix
|
|
host
|
|
.Pp
|
|
.Dl # Ic "mount -r -t cdfs -o nodefperm,noversion /dev/rz" Ns Ar X Ns Ic "c /mnt"
|
|
.Pp
|
|
where
|
|
.Ar X
|
|
is the SCSI-ID of the CD-ROM.
|
|
.(Note
|
|
.Tn Ultrix
|
|
does not have Rock Ridge extensions so leave out everything
|
|
between the first and last period
|
|
.Pq Sq \&.
|
|
in the paths on the CD. For
|
|
example, the path
|
|
.Pa NetBSD-1.4.3
|
|
would show up as
|
|
.Pa NetBSD-1.3 .
|
|
.Note)
|
|
.Pp
|
|
The diskimage file can be found on the CD-ROM at the following location
|
|
(relative to the mount point of the CD)
|
|
.Pp
|
|
.Dl Pa \*M/installation/diskimage/diskimage.gz
|
|
.Pp
|
|
and the diskless boot tar file can be found at
|
|
.Pp
|
|
.Dl Pa \*M/installation/netboot/diskimage.tgz
|
|
.Pp
|
|
Once you have located these files, continue on to either
|
|
.Sx Install via netboot install kernel ,
|
|
.Sx Install via diskless boot ,
|
|
.Sx Install via diskimage
|
|
or
|
|
.Sx Installing from an existing system
|
|
section later in the INSTALL notes.
|
|
.
|
|
.Ss2 Installing from an existing system
|
|
.
|
|
.(Note
|
|
If you are installing
|
|
.Nx
|
|
using an existing
|
|
.Nx
|
|
system that is older than
|
|
.Nx 1.4 , you will need to install new bootblocks
|
|
before installing
|
|
.Nx \*V.
|
|
New bootblocks are in the tar file:
|
|
.Pp
|
|
.Dl Pa \*M/installation/misc/bootblocks.tgz
|
|
.Pp
|
|
in the
|
|
.Nx \*V
|
|
distribution. To install the new bootblocks,
|
|
use the following commands:
|
|
.Pp
|
|
.Dl # Ic "cd /"
|
|
.Dl # Ic "tar -zxpvf .../\*M/installation/misc/bootblocks.tgz"
|
|
.Dl # Ic "/usr/mdec/installboot /dev/rrz" Ns Ar X Ns Ic "c /usr/mdec/bootxx_ffs"
|
|
.Pp
|
|
where
|
|
.Ar X
|
|
is your boot disk SCSI-ID.
|
|
.Note)
|
|
.Pp
|
|
With new
|
|
.Nx
|
|
bootblocks or using the
|
|
.Tn Ultrix
|
|
bootloader, you can boot the kernel located in:
|
|
.Pp
|
|
.Dl Pa \*M/binary/kernel/install.gz
|
|
.Pp
|
|
On
|
|
.Tn Ultrix
|
|
systems you will need to
|
|
.Ic gunzip
|
|
this kernel before booting it.
|
|
A copy of the
|
|
.Ic gunzip
|
|
binary for
|
|
.Tn Ultrix
|
|
systems is located in:
|
|
.Pp
|
|
.Dl Pa \*M/installation/misc/gunzip.ultrix
|
|
.Pp
|
|
Then boot using one of:
|
|
.Pp
|
|
.(tag 12n -offset indent -compact
|
|
.It "2100 or 3100:"
|
|
.Ic "boot -f rz(0," Ns Ar X Ns Ic ",0)install"
|
|
.It "5000/200:"
|
|
.Ic "boot 5/rz" Ns Ar X Ns Ic "/install"
|
|
.It "other 5000s:"
|
|
.Ic "boot 3/rz" Ns Ar X Ns Ic "/install"
|
|
.tag)
|
|
.Pp
|
|
where
|
|
.Ar X
|
|
is your boot disk SCSI-ID, and continue to the
|
|
.Sx Once you've booted the diskimage
|
|
section
|
|
.
|
|
.Ss2 Install via diskimage
|
|
.
|
|
The diskimage file is in
|
|
.Pp
|
|
.Dl Pa \*M/installation/diskimage/diskimage.gz .
|
|
.Pp
|
|
It is shipped compressed and is around 1150 kbytes, uncompressing to
|
|
exactly 2 MB.
|
|
.Pp
|
|
To install the diskimage onto disk
|
|
.Li sd Ns Ar X
|
|
on a
|
|
.Nx*M
|
|
system, do:
|
|
.Pp
|
|
.Dl # Ic "disklabel -W /dev/rsd" Ns Ar X Ns Ic "c"
|
|
.Dl # Ic "gunzip -c diskimage.gz\ |\ dd of=/dev/rsd" Ns Ar X Ns Ic "c bs=10240"
|
|
.Pp
|
|
When installing on a disk with no
|
|
.Nx
|
|
or
|
|
.Tn Ultrix
|
|
label, you may get a
|
|
message like:
|
|
.Pp
|
|
.Dl sdX: WARNING: trying Ultrix label, no disk label
|
|
.Pp
|
|
or when installing on an old
|
|
.Tn Ultrix
|
|
disk, you may get a message like:
|
|
.Pp
|
|
.Dl sdX: WARNING: using ULTRIX partition information
|
|
.Pp
|
|
when issuing the
|
|
.Ic "disklabel -W /dev/rsd" Ns Ar X Ns Ic "c"
|
|
command. This can safely be ignored.
|
|
.Pp
|
|
On
|
|
.Nx Ns /i386,
|
|
the
|
|
.Dq raw disk partition
|
|
is the
|
|
.Sq Li d
|
|
partition, so do:
|
|
.Pp
|
|
.Dl # Ic "disklabel -W /dev/rsd" Ns Ar X Ns Ic "d"
|
|
.Dl # Ic "gunzip -c diskimage.gz\ |\ dd of=/dev/rsd" Ns Ar X Ns Ic "d bs=10240"
|
|
.Pp
|
|
On
|
|
.Nx ,
|
|
be sure to use
|
|
.Ic disklabel -W
|
|
to enable writing to the label
|
|
area of the disk. If you forget this and/or use the
|
|
.Sq block
|
|
device, the
|
|
.Ic dd
|
|
command may silently fail.
|
|
.Pp
|
|
On
|
|
.Tn Ultrix
|
|
systems, do:
|
|
.Pp
|
|
.Dl # Ic "gunzip -c diskimage.gz | dd of=/dev/rrz" Ns Ar X Ns Ic "c bs=10240"
|
|
.Pp
|
|
A copy of the
|
|
.Ic gunzip
|
|
program is located in
|
|
.Pp
|
|
.Dl Pa \*M/installation/misc/gunzip.ultrix
|
|
.Pp
|
|
if you do not already have it.
|
|
.Pp
|
|
On
|
|
.Tn MS-DOS ,
|
|
use an
|
|
.Sq unzip
|
|
utility, then use
|
|
.Ic rawrite .
|
|
.Pp
|
|
Then boot using one of:
|
|
.Pp
|
|
.(tag 12n -offset indent -compact
|
|
.It "2100 or 3100:"
|
|
.Ic "boot -f rz(0," Ns Ar X Ns Ic ",0)netbsd"
|
|
.It "5000/200:"
|
|
.Ic "boot 5/rz" Ns Ar X Ns Ic "/netbsd"
|
|
.It "other 5000s:"
|
|
.Ic "boot 3/rz" Ns Ar X Ns Ic "/netbsd"
|
|
.tag)
|
|
.Pp
|
|
where
|
|
.Ar X
|
|
is your boot disk SCSI-ID, and continue to the
|
|
.Sx Once you've booted the diskimage
|
|
section.
|
|
.
|
|
.Ss2 Install via netboot install kernel
|
|
.
|
|
Booting
|
|
.Nx*M
|
|
\*V install kernel over a network requires a BOOTP
|
|
or DHCP server and a TFTP server. (These are usually all run on the
|
|
same machine.) There are two basic stages to the boot:
|
|
.Pp
|
|
.
|
|
.(bullet
|
|
The \*M PROM software sends a BOOTP request to get its own address, the
|
|
address of the TFTP server and the file to download.
|
|
.It
|
|
It downloads the file name obtained from BOOTP, which is the install
|
|
kernel, via TFTP and then executes it.
|
|
.bullet)
|
|
.
|
|
.Pp
|
|
You will need to set up servers for BOOTP and TFTP.
|
|
.Pp
|
|
For the BOOTP server you need to specify the:
|
|
.Pp
|
|
.
|
|
.(bullet -compact
|
|
hardware type (Ethernet)
|
|
.It
|
|
hardware address (Ethernet MAC address)
|
|
.It
|
|
IP address of the client
|
|
.It
|
|
subnet mask of the client
|
|
.It
|
|
address of the TFTP server
|
|
.It
|
|
name of the kernel loaded via TFTP
|
|
.bullet)
|
|
.
|
|
.Pp
|
|
Here's an example for a
|
|
.Ul
|
|
system running
|
|
.Ic bootpd :
|
|
.(disp
|
|
myhost.mydom.com:\e
|
|
:ht=ethernet:ha=08002b123456:\e
|
|
:ip=192.168.1.2:sm=255.255.255.0:\e
|
|
:sa=192.168.1.1:bf=install:\e
|
|
:rp=/usr/export/\*M:
|
|
.disp)
|
|
.Pp
|
|
And here's an example for a
|
|
.Ul
|
|
system running the ISC
|
|
.Ic dhcpd :
|
|
.(disp
|
|
host \*M {
|
|
hardware ethernet 08:0:2b:12:34:56;
|
|
fixed-address 192.168.1.2;
|
|
option host-name "myhost.mydom.com";
|
|
filename "install";
|
|
option domain-name-servers 192.168.1.1;
|
|
option broadcast-address 255.255.255.0;
|
|
option domain-name "my.domain";
|
|
option root-path "/usr/export/\*M";
|
|
}
|
|
.disp)
|
|
.Pp
|
|
For the TFTP server, You will need to copy the
|
|
.Ic install.ecoff
|
|
kernel to the directory used by the TFTP server. This file must be
|
|
gunzipped.
|
|
.Pp
|
|
Then boot using one of:
|
|
.Pp
|
|
.(tag 12n -offset indent -compact
|
|
.It "2100 or 3100:"
|
|
.Ic "boot -f tftp()"
|
|
.It "5000/200:"
|
|
.Ic "boot 6/tftp"
|
|
.It "other 5000s:"
|
|
.Ic "boot 3/tftp"
|
|
.tag)
|
|
.Pp
|
|
and continue to the
|
|
.Sx Once you've booted the diskimage
|
|
section.
|
|
.
|
|
.Ss2 Install via diskless boot
|
|
.
|
|
The file
|
|
.Pa \*M/installation/netboot/diskimage.tar.gz
|
|
contains a suitable set of files for installing on an NFS server to set
|
|
up a diskless root filesytem. (It is a tar copy of the contents of an
|
|
installation ramdisk file system contained in the install kernel.) You
|
|
will need to find an NFS server, unpack the tarfile, and setup
|
|
BOOTP/dhcp service for your \*M. Instructions for setting up
|
|
an NFS server and diskless booting are on the
|
|
.Nx*M
|
|
netboot
|
|
webpage at
|
|
.Lk http://www.netbsd.org/Ports/\*M/netboot.html
|
|
.Pp
|
|
Since the system install utility, sysinst, requires a read/write root,
|
|
installing via diskless boot is only feasible if your NFS server exports
|
|
the diskless root read-write. If this is not possible, you should
|
|
install via other of the other installation procedures.
|
|
.Pp
|
|
Once you have booted the kernel, continue to the
|
|
.Sx Once you've booted the diskimage
|
|
section.
|
|
.
|
|
.Ss2 Once you've booted the diskimage
|
|
.
|
|
Once you've booted the installation kernel you will need to
|
|
select your terminal type. Use
|
|
.Ic rcons
|
|
for a framebuffer console,
|
|
.Ic vt100
|
|
for a serial console with a vt100-compatible terminal, or
|
|
.Ic xterm
|
|
or
|
|
.Ic xterms
|
|
for a
|
|
.Xr tip 1
|
|
or
|
|
.Xr cu 1
|
|
connection running in an
|
|
.Xr xterm 1 .
|
|
.Pp
|
|
The system will then start the
|
|
.Ic sysinst
|
|
program.
|
|
.so ../common/sysinst
|