474 lines
14 KiB
C
474 lines
14 KiB
C
/* $NetBSD: uda.c,v 1.58 2008/03/11 05:34:02 matt Exp $ */
|
|
/*
|
|
* Copyright (c) 1988 Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* Chris Torek.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @(#)uda.c 7.32 (Berkeley) 2/13/91
|
|
*/
|
|
|
|
/*
|
|
* Copyright (c) 1996 Ludd, University of Lule}, Sweden.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* Chris Torek.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of
|
|
* California, Berkeley and its contributors.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @(#)uda.c 7.32 (Berkeley) 2/13/91
|
|
*/
|
|
|
|
/*
|
|
* UDA50 disk device driver
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: uda.c,v 1.58 2008/03/11 05:34:02 matt Exp $");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/device.h>
|
|
#include <sys/buf.h>
|
|
#include <sys/bufq.h>
|
|
#include <sys/malloc.h>
|
|
|
|
#include <sys/bus.h>
|
|
#include <machine/sid.h>
|
|
|
|
#include <dev/qbus/ubavar.h>
|
|
|
|
#include <dev/mscp/mscp.h>
|
|
#include <dev/mscp/mscpreg.h>
|
|
#include <dev/mscp/mscpvar.h>
|
|
|
|
#include "ioconf.h"
|
|
|
|
/*
|
|
* Software status, per controller.
|
|
*/
|
|
struct uda_softc {
|
|
device_t sc_dev; /* Autoconfig info */
|
|
struct uba_softc *sc_uh;
|
|
struct evcnt sc_intrcnt; /* Interrupt counting */
|
|
struct uba_unit sc_unit; /* Struct common for UBA to communicate */
|
|
struct ubinfo sc_ui;
|
|
bus_dma_tag_t sc_dmat;
|
|
bus_space_tag_t sc_iot;
|
|
bus_space_handle_t sc_iph;
|
|
bus_space_handle_t sc_sah;
|
|
struct mscp_softc *sc_softc; /* MSCP info (per mscpvar.h) */
|
|
int sc_inq;
|
|
};
|
|
|
|
static int udamatch(device_t, cfdata_t, void *);
|
|
static void udaattach(device_t, device_t, void *);
|
|
static void udareset(device_t );
|
|
static void udaintr(void *);
|
|
static int udaready(struct uba_unit *);
|
|
static void udactlrdone(device_t );
|
|
static int udaprint(void *, const char *);
|
|
static void udasaerror(device_t, int);
|
|
static void udago(device_t, struct mscp_xi *);
|
|
|
|
CFATTACH_DECL_NEW(mtc, sizeof(struct uda_softc),
|
|
udamatch, udaattach, NULL, NULL);
|
|
|
|
CFATTACH_DECL_NEW(uda, sizeof(struct uda_softc),
|
|
udamatch, udaattach, NULL, NULL);
|
|
|
|
/*
|
|
* More driver definitions, for generic MSCP code.
|
|
*/
|
|
struct mscp_ctlr uda_mscp_ctlr = {
|
|
udactlrdone,
|
|
udago,
|
|
udasaerror,
|
|
};
|
|
|
|
int
|
|
udaprint(void *aux, const char *name)
|
|
{
|
|
if (name)
|
|
aprint_normal("%s: mscpbus", name);
|
|
return UNCONF;
|
|
}
|
|
|
|
/*
|
|
* Poke at a supposed UDA50 to see if it is there.
|
|
*/
|
|
int
|
|
udamatch(device_t parent, cfdata_t cf, void *aux)
|
|
{
|
|
struct uba_attach_args *ua = aux;
|
|
struct uba_softc *uh = device_private(parent);
|
|
struct mscp_softc mi; /* Nice hack */
|
|
int tries;
|
|
|
|
/* Get an interrupt vector. */
|
|
|
|
mi.mi_iot = ua->ua_iot;
|
|
mi.mi_iph = ua->ua_ioh;
|
|
mi.mi_sah = ua->ua_ioh + 2;
|
|
mi.mi_swh = ua->ua_ioh + 2;
|
|
|
|
/*
|
|
* Initialise the controller (partially). The UDA50 programmer's
|
|
* manual states that if initialisation fails, it should be retried
|
|
* at least once, but after a second failure the port should be
|
|
* considered `down'; it also mentions that the controller should
|
|
* initialise within ten seconds. Or so I hear; I have not seen
|
|
* this manual myself.
|
|
*/
|
|
tries = 0;
|
|
again:
|
|
|
|
bus_space_write_2(mi.mi_iot, mi.mi_iph, 0, 0); /* Start init */
|
|
if (mscp_waitstep(&mi, MP_STEP1, MP_STEP1) == 0)
|
|
return 0; /* Nothing here... */
|
|
|
|
bus_space_write_2(mi.mi_iot, mi.mi_sah, 0,
|
|
MP_ERR | (NCMDL2 << 11) | (NRSPL2 << 8) | MP_IE |
|
|
((uh->uh_lastiv - 4) >> 2));
|
|
|
|
if (mscp_waitstep(&mi, MP_STEP2, MP_STEP2) == 0) {
|
|
printf("udaprobe: init step2 no change. sa=%x\n",
|
|
bus_space_read_2(mi.mi_iot, mi.mi_sah, 0));
|
|
goto bad;
|
|
}
|
|
|
|
/* should have interrupted by now */
|
|
return 1;
|
|
bad:
|
|
if (++tries < 2)
|
|
goto again;
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
udaattach(device_t parent, device_t self, void *aux)
|
|
{
|
|
struct uda_softc *sc = device_private(self);
|
|
struct uba_attach_args *ua = aux;
|
|
struct mscp_attach_args ma;
|
|
int error;
|
|
|
|
printf("\n");
|
|
|
|
sc->sc_dev = self;
|
|
sc->sc_uh = device_private(parent);
|
|
|
|
sc->sc_uh->uh_lastiv -= 4; /* remove dynamic interrupt vector */
|
|
|
|
uba_intr_establish(ua->ua_icookie, ua->ua_cvec,
|
|
udaintr, sc, &sc->sc_intrcnt);
|
|
uba_reset_establish(udareset, sc->sc_dev);
|
|
evcnt_attach_dynamic(&sc->sc_intrcnt, EVCNT_TYPE_INTR, ua->ua_evcnt,
|
|
device_xname(sc->sc_dev), "intr");
|
|
|
|
sc->sc_iot = ua->ua_iot;
|
|
sc->sc_iph = ua->ua_ioh;
|
|
sc->sc_sah = ua->ua_ioh + 2;
|
|
sc->sc_dmat = ua->ua_dmat;
|
|
|
|
/*
|
|
* Fill in the uba_unit struct, so we can communicate with the uba.
|
|
*/
|
|
sc->sc_unit.uu_dev = self; /* Backpointer to softc */
|
|
sc->sc_unit.uu_ready = udaready;/* go routine called from adapter */
|
|
sc->sc_unit.uu_keepbdp = vax_cputype == VAX_750 ? 1 : 0;
|
|
|
|
/*
|
|
* Map the communication area and command and
|
|
* response packets into Unibus space.
|
|
*/
|
|
sc->sc_ui.ui_size = sizeof(struct mscp_pack);
|
|
if ((error = ubmemalloc(sc->sc_uh, &sc->sc_ui, UBA_CANTWAIT)))
|
|
return printf("ubmemalloc failed: %d\n", error);
|
|
|
|
bzero(sc->sc_ui.ui_vaddr, sizeof (struct mscp_pack));
|
|
|
|
/*
|
|
* The only thing that differ UDA's and Tape ctlr's is
|
|
* their vcid. Beacuse there are no way to determine which
|
|
* ctlr type it is, we check what is generated and later
|
|
* set the correct vcid.
|
|
*/
|
|
ma.ma_type = (device_is_a(self, "mtc") ? MSCPBUS_TAPE : MSCPBUS_DISK);
|
|
|
|
ma.ma_mc = &uda_mscp_ctlr;
|
|
ma.ma_type |= MSCPBUS_UDA;
|
|
ma.ma_uda = (struct mscp_pack *)sc->sc_ui.ui_vaddr;
|
|
ma.ma_softc = &sc->sc_softc;
|
|
ma.ma_iot = sc->sc_iot;
|
|
ma.ma_iph = sc->sc_iph;
|
|
ma.ma_sah = sc->sc_sah;
|
|
ma.ma_swh = sc->sc_sah;
|
|
ma.ma_dmat = sc->sc_dmat;
|
|
ma.ma_dmam = sc->sc_ui.ui_dmam;
|
|
ma.ma_ivec = sc->sc_uh->uh_lastiv;
|
|
ma.ma_ctlrnr = (ua->ua_iaddr == 0172150 ? 0 : 1); /* XXX */
|
|
ma.ma_adapnr = sc->sc_uh->uh_nr;
|
|
config_found(sc->sc_dev, &ma, udaprint);
|
|
}
|
|
|
|
/*
|
|
* Start a transfer if there are free resources available, otherwise
|
|
* let it go in udaready, forget it for now.
|
|
* Called from mscp routines.
|
|
*/
|
|
void
|
|
udago(device_t dv, struct mscp_xi *mxi)
|
|
{
|
|
struct uda_softc *sc = device_private(dv);
|
|
struct uba_unit *uu;
|
|
struct buf *bp = mxi->mxi_bp;
|
|
int err;
|
|
|
|
/*
|
|
* If we already have transfers queued, don't try to load
|
|
* the map again.
|
|
*/
|
|
if (sc->sc_inq == 0) {
|
|
err = bus_dmamap_load(sc->sc_dmat, mxi->mxi_dmam,
|
|
bp->b_data, bp->b_bcount,
|
|
(bp->b_flags & B_PHYS ? bp->b_proc : 0), BUS_DMA_NOWAIT);
|
|
if (err == 0) {
|
|
mscp_dgo(sc->sc_softc, mxi);
|
|
return;
|
|
}
|
|
}
|
|
uu = malloc(sizeof(struct uba_unit), M_DEVBUF, M_NOWAIT|M_ZERO);
|
|
if (uu == NULL)
|
|
panic("udago: no mem");
|
|
uu->uu_ready = udaready;
|
|
uu->uu_dev = dv;
|
|
uu->uu_ref = mxi;
|
|
uba_enqueue(uu);
|
|
sc->sc_inq++;
|
|
}
|
|
|
|
/*
|
|
* Called if we have been blocked for resources, and resources
|
|
* have been freed again. Return 1 if we could start all
|
|
* transfers again, 0 if we still are waiting.
|
|
* Called from uba resource free routines.
|
|
*/
|
|
int
|
|
udaready(struct uba_unit *uu)
|
|
{
|
|
struct uda_softc *sc = device_private(uu->uu_dev);
|
|
struct mscp_xi *mxi = uu->uu_ref;
|
|
struct buf *bp = mxi->mxi_bp;
|
|
int err;
|
|
|
|
err = bus_dmamap_load(sc->sc_dmat, mxi->mxi_dmam, bp->b_data,
|
|
bp->b_bcount, (bp->b_flags & B_PHYS ? bp->b_proc : 0),
|
|
BUS_DMA_NOWAIT);
|
|
|
|
if (err)
|
|
return 0;
|
|
mscp_dgo(sc->sc_softc, mxi);
|
|
sc->sc_inq--;
|
|
free(uu, M_DEVBUF);
|
|
return 1;
|
|
}
|
|
|
|
static const struct saerr {
|
|
int code; /* error code (including UDA_ERR) */
|
|
const char *desc; /* what it means: Efoo => foo error */
|
|
} saerr[] = {
|
|
{ 0100001, "Eunibus packet read" },
|
|
{ 0100002, "Eunibus packet write" },
|
|
{ 0100003, "EUDA ROM and RAM parity" },
|
|
{ 0100004, "EUDA RAM parity" },
|
|
{ 0100005, "EUDA ROM parity" },
|
|
{ 0100006, "Eunibus ring read" },
|
|
{ 0100007, "Eunibus ring write" },
|
|
{ 0100010, " unibus interrupt master failure" },
|
|
{ 0100011, "Ehost access timeout" },
|
|
{ 0100012, " host exceeded command limit" },
|
|
{ 0100013, " unibus bus master failure" },
|
|
{ 0100014, " DM XFC fatal error" },
|
|
{ 0100015, " hardware timeout of instruction loop" },
|
|
{ 0100016, " invalid virtual circuit id" },
|
|
{ 0100017, "Eunibus interrupt write" },
|
|
{ 0104000, "Efatal sequence" },
|
|
{ 0104040, " D proc ALU" },
|
|
{ 0104041, "ED proc control ROM parity" },
|
|
{ 0105102, "ED proc w/no BD#2 or RAM parity" },
|
|
{ 0105105, "ED proc RAM buffer" },
|
|
{ 0105152, "ED proc SDI" },
|
|
{ 0105153, "ED proc write mode wrap serdes" },
|
|
{ 0105154, "ED proc read mode serdes, RSGEN & ECC" },
|
|
{ 0106040, "EU proc ALU" },
|
|
{ 0106041, "EU proc control reg" },
|
|
{ 0106042, " U proc DFAIL/cntl ROM parity/BD #1 test CNT" },
|
|
{ 0106047, " U proc const PROM err w/D proc running SDI test" },
|
|
{ 0106055, " unexpected trap" },
|
|
{ 0106071, "EU proc const PROM" },
|
|
{ 0106072, "EU proc control ROM parity" },
|
|
{ 0106200, "Estep 1 data" },
|
|
{ 0107103, "EU proc RAM parity" },
|
|
{ 0107107, "EU proc RAM buffer" },
|
|
{ 0107115, " test count wrong (BD 12)" },
|
|
{ 0112300, "Estep 2" },
|
|
{ 0122240, "ENPR" },
|
|
{ 0122300, "Estep 3" },
|
|
{ 0142300, "Estep 4" },
|
|
{ 0, " unknown error code" }
|
|
};
|
|
|
|
/*
|
|
* If the error bit was set in the controller status register, gripe,
|
|
* then (optionally) reset the controller and requeue pending transfers.
|
|
*/
|
|
void
|
|
udasaerror(device_t dev, int doreset)
|
|
{
|
|
struct uda_softc *sc = device_private(dev);
|
|
int code = bus_space_read_2(sc->sc_iot, sc->sc_sah, 0);
|
|
const struct saerr *e;
|
|
|
|
if ((code & MP_ERR) == 0)
|
|
return;
|
|
for (e = saerr; e->code; e++)
|
|
if (e->code == code)
|
|
break;
|
|
aprint_error_dev(sc->sc_dev, "controller error, sa=0%o (%s%s)\n",
|
|
code, e->desc + 1, *e->desc == 'E' ? " error" : "");
|
|
#if 0 /* XXX we just avoid panic when autoconfig non-existent KFQSA devices */
|
|
if (doreset) {
|
|
mscp_requeue(sc->sc_softc);
|
|
/* (void) udainit(sc); XXX */
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Interrupt routine. Depending on the state of the controller,
|
|
* continue initialisation, or acknowledge command and response
|
|
* interrupts, and process responses.
|
|
*/
|
|
static void
|
|
udaintr(void *arg)
|
|
{
|
|
struct uda_softc *sc = arg;
|
|
|
|
/* ctlr fatal error */
|
|
if (bus_space_read_2(sc->sc_iot, sc->sc_sah, 0) & MP_ERR) {
|
|
udasaerror(sc->sc_dev, 1);
|
|
return;
|
|
}
|
|
/*
|
|
* Handle buffer purge requests.
|
|
* XXX - should be done in bus_dma_sync().
|
|
*/
|
|
#ifdef notyet
|
|
if (ud->mp_ca.ca_bdp) {
|
|
if (sc->sc_uh->uh_ubapurge)
|
|
(*sc->sc_uh->uh_ubapurge)(sc->sc_uh,
|
|
ud->mp_ca.ca_bdp);
|
|
/* signal purge complete */
|
|
bus_space_write_2(sc->sc_iot, sc->sc_sah, 0, 0);
|
|
}
|
|
#endif
|
|
|
|
mscp_intr(sc->sc_softc);
|
|
}
|
|
|
|
/*
|
|
* A Unibus reset has occurred on UBA uban. Reinitialise the controller(s)
|
|
* on that Unibus, and requeue outstanding I/O.
|
|
*/
|
|
static void
|
|
udareset(device_t dev)
|
|
{
|
|
struct uda_softc *sc = device_private(dev);
|
|
/*
|
|
* Our BDP (if any) is gone; our command (if any) is
|
|
* flushed; the device is no longer mapped; and the
|
|
* UDA50 is not yet initialised.
|
|
*/
|
|
if (sc->sc_unit.uu_bdp) {
|
|
/* printf("<%d>", UBAI_BDP(sc->sc_unit.uu_bdp)); */
|
|
sc->sc_unit.uu_bdp = 0;
|
|
}
|
|
|
|
/* reset queues and requeue pending transfers */
|
|
mscp_requeue(sc->sc_softc);
|
|
|
|
/*
|
|
* If it fails to initialise we will notice later and
|
|
* try again (and again...). Do not call udastart()
|
|
* here; it will be done after the controller finishes
|
|
* initialisation.
|
|
*/
|
|
/* XXX if (udainit(sc)) */
|
|
printf(" (hung)");
|
|
}
|
|
|
|
void
|
|
udactlrdone(device_t dev)
|
|
{
|
|
struct uda_softc *sc = device_private(dev);
|
|
int s;
|
|
|
|
s = spluba();
|
|
uba_done(sc->sc_uh);
|
|
splx(s);
|
|
}
|