NetBSD/sys/dev/mca/esp_mca.c

417 lines
11 KiB
C

/* $NetBSD: esp_mca.c,v 1.19 2008/04/28 20:23:53 martin Exp $ */
/*-
* Copyright (c) 2001 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jaromir Dolecek <jdolecek@NetBSD.org>.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Driver for NCR 53c90, MCA version, with 86c01 DMA controller chip.
*
* Some of the information used to write this driver was taken
* from Tymm Twillman <tymm@computer.org>'s Linux MCA NC53c90 driver,
* in drivers/scsi/mca_53c9x.c
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: esp_mca.c,v 1.19 2008/04/28 20:23:53 martin Exp $");
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/errno.h>
#include <sys/ioctl.h>
#include <sys/device.h>
#include <sys/buf.h>
#include <sys/proc.h>
#include <sys/user.h>
#include <sys/queue.h>
#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>
#include <dev/scsipi/scsi_message.h>
#include <sys/bus.h>
#include <sys/cpu.h>
#include <dev/ic/ncr53c9xreg.h>
#include <dev/ic/ncr53c9xvar.h>
#include <dev/mca/espvar.h>
#include <dev/mca/espreg.h>
#include <dev/mca/mcavar.h>
#include <dev/mca/mcareg.h>
#include <dev/mca/mcadevs.h>
#if 0
#if defined(DEBUG) && !defined(NCR53C9X_DEBUG)
#define NCR53C9X_DEBUG
#endif
#endif
#ifdef NCR53C9X_DEBUG
static int esp_mca_debug = 0;
#define DPRINTF(x) if (esp_mca_debug) printf x;
#else
#define DPRINTF(x)
#endif
#define ESP_MCA_IOSIZE 0x20
#define ESP_REG_OFFSET 0x10
static int esp_mca_match(device_t, cfdata_t, void *);
static void esp_mca_attach(device_t, device_t, void *);
CFATTACH_DECL_NWE(esp_mca, sizeof(struct esp_softc),
esp_mca_match, esp_mca_attach, NULL, NULL);
/*
* Functions and the switch for the MI code.
*/
static uint8_t esp_read_reg(struct ncr53c9x_softc *, int);
static void esp_write_reg(struct ncr53c9x_softc *, int, uint8_t);
static int esp_dma_isintr(struct ncr53c9x_softc *);
static void esp_dma_reset(struct ncr53c9x_softc *);
static int esp_dma_intr(struct ncr53c9x_softc *);
static int esp_dma_setup(struct ncr53c9x_softc *, uint8_t **,
size_t *, int, size_t *);
static void esp_dma_go(struct ncr53c9x_softc *);
static void esp_dma_stop(struct ncr53c9x_softc *);
static int esp_dma_isactive(struct ncr53c9x_softc *);
static struct ncr53c9x_glue esp_glue = {
esp_read_reg,
esp_write_reg,
esp_dma_isintr,
esp_dma_reset,
esp_dma_intr,
esp_dma_setup,
esp_dma_go,
esp_dma_stop,
esp_dma_isactive,
NULL, /* gl_clear_latched_intr */
};
static int
esp_mca_match(device_t parent, cfdata_t cf, void *aux)
{
struct mca_attach_args *ma = aux;
switch (ma->ma_id) {
case MCA_PRODUCT_NCR53C90:
return 1;
}
return 0;
}
static void
esp_mca_attach(device_t parent, device_t self, void *aux)
{
struct esp_softc *esc = device_private(self);
struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x;
struct mca_attach_args *ma = aux;
uint16_t iobase;
int scsi_id, irq, drq, error;
bus_space_handle_t ioh;
int pos2, pos3, pos5;
static const uint16_t ncrmca_iobase[] = {
0, 0x240, 0x340, 0x400, 0x420, 0x3240, 0x8240, 0xa240
};
sc->sc_dev = self;
/*
* NCR SCSI Adapter (ADF 7f4f)
*
* POS register 2: (adf pos0)
*
* 7 6 5 4 3 2 1 0
* \_/ \___/ \__ enable: 0=adapter disabled, 1=adapter enabled
* | \____ I/O base (32B): 001=0x240 010=0x340 011=0x400
* | 100=0x420 101=0x3240 110=0x8240 111=0xa240
* \__________ IRQ: 00=3 01=5 10=7 11=9
*
* POS register 3: (adf pos1)
*
* 7 6 5 4 3 2 1 0
* 1 1 1 | \_____/
* | \__ DMA level
* \_________ Fairness: 1=enabled 0=disabled
*
* POS register 5: (adf pos3)
*
* 7 6 5 4 3 2 1 0
* 1 | \___/
* | \__ Static Ram: 0xC8000-0xC87FF + XX*0x4000
* \___________ Host Adapter ID: 1=7 0=6
*/
pos2 = mca_conf_read(ma->ma_mc, ma->ma_slot, 2);
pos3 = mca_conf_read(ma->ma_mc, ma->ma_slot, 3);
pos5 = mca_conf_read(ma->ma_mc, ma->ma_slot, 5);
iobase = ncrmca_iobase[(pos2 & 0x0e) >> 1];
irq = 3 + 2 * ((pos2 & 0x30) >> 4);
drq = (pos3 & 0x0f);
scsi_id = 6 + ((pos5 & 0x20) ? 1 : 0);
aprint_normal(" slot %d irq %d drq %d: NCR SCSI Adapter\n",
ma->ma_slot + 1, irq, drq);
/* Map the 86C01 registers */
if (bus_space_map(ma->ma_iot, iobase, ESP_MCA_IOSIZE, 0, &ioh)) {
aprint_error_dev(&sc->sc_dev, "can't map i/o space\n");
return;
}
esc->sc_iot = ma->ma_iot;
esc->sc_ioh = ioh;
/* Submap the 'esp' registers */
if (bus_space_subregion(ma->ma_iot, ioh, ESP_REG_OFFSET,
ESP_MCA_IOSIZE-ESP_REG_OFFSET, &esc->sc_esp_ioh)) {
aprint_error_dev(&sc->sc_dev, "can't subregion i/o space\n");
return;
}
/* Setup DMA map */
esc->sc_dmat = ma->ma_dmat;
if ((error = mca_dmamap_create(esc->sc_dmat, MAXPHYS,
BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW | MCABUS_DMA_IOPORT,
&esc->sc_xfer, drq)) != 0){
aprint_error_dev(&sc->sc_dev,
"couldn't create DMA map - error %d\n", error);
return;
}
/* MI code glue */
sc->sc_id = scsi_id;
sc->sc_freq = 25; /* MHz */
sc->sc_glue = &esp_glue;
sc->sc_cfg1 = sc->sc_id | NCRCFG1_PARENB; //| NCRCFG1_SLOW;
/* No point setting sc_cfg[2345], they won't be used */
sc->sc_rev = NCR_VARIANT_NCR53C90_86C01;
sc->sc_minsync = 0;
/* max 64KB DMA */
sc->sc_maxxfer = 64 * 1024;
/* Establish interrupt */
esc->sc_ih = mca_intr_establish(ma->ma_mc, irq, IPL_BIO, ncr53c9x_intr,
esc);
if (esc->sc_ih == NULL) {
aprint_error_dev(&sc->sc_dev, "couldn't establish interrupt\n");
return;
}
/*
* Massage the 86C01 chip - setup MCA DMA controller for DMA via
* the 86C01 register, and enable 86C01 interrupts.
*/
mca_dma_set_ioport(drq, iobase + N86C01_PIO);
bus_space_write_1(esc->sc_iot, esc->sc_ioh, N86C01_MODE_ENABLE,
bus_space_read_1(esc->sc_iot, esc->sc_ioh, N86C01_MODE_ENABLE) |
N86C01_INTR_ENABLE);
/*
* Now try to attach all the sub-devices
*/
sc->sc_adapter.adapt_minphys = minphys;
sc->sc_adapter.adapt_request = ncr53c9x_scsipi_request;
/* Do the common parts of attachment. */
printf("%s", device_xname(self));
ncr53c9x_attach(sc);
}
/*
* Glue functions.
*/
static uint8_t
esp_read_reg(struct ncr53c9x_softc *sc, int reg)
{
struct esp_softc *esc = (struct esp_softc *)sc;
return bus_space_read_1(esc->sc_iot, esc->sc_esp_ioh, reg);
}
static void
esp_write_reg(struct ncr53c9x_softc *sc, int reg, uint8_t val)
{
struct esp_softc *esc = (struct esp_softc *)sc;
bus_space_write_1(esc->sc_iot, esc->sc_esp_ioh, reg, val);
}
static int
esp_dma_isintr(struct ncr53c9x_softc *sc)
{
struct esp_softc *esc = (struct esp_softc *)sc;
DPRINTF(("[esp_dma_isintr] "));
return bus_space_read_1(esc->sc_iot, esc->sc_ioh, N86C01_STATUS) &
N86C01_IRQ_PEND;
}
static void
esp_dma_reset(struct ncr53c9x_softc *sc)
{
struct esp_softc *esc = (struct esp_softc *)sc;
DPRINTF(("[esp_dma_reset] "));
if (esc->sc_flags & ESP_XFER_LOADED) {
bus_dmamap_unload(esc->sc_dmat, esc->sc_xfer);
esc->sc_flags &= ~ESP_XFER_LOADED;
}
if (esc->sc_flags & ESP_XFER_ACTIVE) {
esc->sc_flags &= ~ESP_XFER_ACTIVE;
mca_disk_unbusy();
}
}
static int
esp_dma_intr(struct ncr53c9x_softc *sc)
{
struct esp_softc *esc = (struct esp_softc *)sc;
DPRINTF(("[esp_dma_intr] "));
if ((esc->sc_flags & ESP_XFER_ACTIVE) == 0) {
printf("%s: dma_intr--inactive DMA\n",
device_xname(sc->sc_dev));
return -1;
}
if ((sc->sc_espintr & NCRINTR_BS) == 0) {
esc->sc_flags &= ~ESP_XFER_ACTIVE;
mca_disk_unbusy();
return 0;
}
sc->sc_espstat |= NCRSTAT_TC; /* XXX */
if ((sc->sc_espstat & NCRSTAT_TC) == 0) {
printf("%s: DMA not complete?\n", device_xname(sc->sc_dev));
return 1;
}
bus_dmamap_sync(esc->sc_dmat, esc->sc_xfer, 0, *esc->sc_xfer_len,
(esc->sc_flags & ESP_XFER_READ) ?
BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(esc->sc_dmat, esc->sc_xfer);
esc->sc_flags &= ~ESP_XFER_LOADED;
*esc->sc_xfer_addr += *esc->sc_xfer_len;
*esc->sc_xfer_len = 0;
esc->sc_flags &= ~ESP_XFER_ACTIVE;
mca_disk_unbusy();
return 0;
}
/*
* Setup DMA transfer.
*/
static int
esp_dma_setup(struct ncr53c9x_softc *sc, uint8_t **addr, size_t *len,
int datain, size_t *dmasize)
{
struct esp_softc *esc = (struct esp_softc *)sc;
int error;
int fl;
DPRINTF(("[esp_dma_setup] "));
if (esc->sc_flags & ESP_XFER_LOADED) {
printf("%s: %s: unloading leaked xfer\n",
device_xname(sc->sc_dev), __func__);
bus_dmamap_unload(esc->sc_dmat, esc->sc_xfer);
esc->sc_flags &= ~ESP_XFER_LOADED;
}
/* Load the buffer for DMA transfer. */
fl = (datain) ? BUS_DMA_READ : BUS_DMA_WRITE;
if ((error = bus_dmamap_load(esc->sc_dmat, esc->sc_xfer, *addr,
*len, NULL, BUS_DMA_STREAMING|fl))) {
printf("%s: %s: unable to load DMA buffer - error %d\n",
device_xname(sc->sc_dev), __func__, error);
return error;
}
bus_dmamap_sync(esc->sc_dmat, esc->sc_xfer, 0, *len,
(datain) ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
esc->sc_flags |= ESP_XFER_LOADED | (datain ? ESP_XFER_READ : 0);
esc->sc_xfer_addr = addr;
esc->sc_xfer_len = len;
return 0;
}
static void
esp_dma_go(struct ncr53c9x_softc *sc)
{
struct esp_softc *esc = (struct esp_softc *)sc;
DPRINTF(("[esp_dma_go] "));
esc->sc_flags |= ESP_XFER_ACTIVE;
mca_disk_busy();
}
static void
esp_dma_stop(struct ncr53c9x_softc *sc)
{
DPRINTF(("[esp_dma_stop] "));
panic("%s: stop not yet implemented", device_xname(sc->sc_dev));
}
static int
esp_dma_isactive(struct ncr53c9x_softc *sc)
{
struct esp_softc *esc = (struct esp_softc *)sc;
DPRINTF(("[esp_dma_isactive] "));
return esc->sc_flags & ESP_XFER_ACTIVE;
}