649 lines
15 KiB
C
649 lines
15 KiB
C
/*
|
|
* Copyright (c) 1991-1993 Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the Computer Systems
|
|
* Engineering Group at Lawrence Berkeley Laboratory.
|
|
* 4. Neither the name of the University nor of the Laboratory may be used
|
|
* to endorse or promote products derived from this software without
|
|
* specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $Id: sb.c,v 1.9 1994/04/24 01:30:01 mycroft Exp $
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/syslog.h>
|
|
#include <sys/device.h>
|
|
|
|
#include <machine/cpu.h>
|
|
#include <machine/pio.h>
|
|
|
|
#include <i386/isa/isavar.h>
|
|
#include <i386/isa/dmavar.h>
|
|
#include <i386/isa/icu.h>
|
|
|
|
#include "sbreg.h"
|
|
|
|
/*
|
|
* Software state, per SoundBlaster card.
|
|
* The soundblaster has multiple functionality, which we must demultiplex.
|
|
* One approach is to have one major device number for the soundblaster card,
|
|
* and use different minor numbers to indicate which hardware function
|
|
* we want. This would make for one large driver. Instead our approach
|
|
* is to partition the design into a set of drivers that share an underlying
|
|
* piece of hardware. Most things are hard to share, for example, the audio
|
|
* and midi ports. For audio, we might want to mix two processes' signals,
|
|
* and for midi we might want to merge streams (this is hard due to
|
|
* running status). Moreover, we should be able to re-use the high-level
|
|
* modules with other kinds of hardware. In this module, we only handle the
|
|
* most basic communications with the sb card.
|
|
*/
|
|
struct sb_softc {
|
|
struct device sc_dev; /* base device */
|
|
struct isadev sc_id; /* ISA device */
|
|
struct intrhand sc_ih; /* interrupt vectoring */
|
|
|
|
u_short sc_open; /* reference count of open calls */
|
|
u_short sc_dmachan; /* dma channel */
|
|
u_short sc_locked; /* true when doing HS DMA */
|
|
u_short sc_iobase; /* I/O port base address */
|
|
u_short sc_adacmode; /* low/high speed mode indicator */
|
|
#define SB_ADAC_LS 0
|
|
#define SB_ADAC_HS 1
|
|
u_short sc_adactc; /* current adac time constant */
|
|
u_long sc_interrupts; /* number of interrupts taken */
|
|
void (*sc_intr)(void*); /* dma completion intr handler */
|
|
void (*sc_mintr)(void*, int);/* midi input intr handler */
|
|
void *sc_arg; /* arg for sc_intr() */
|
|
};
|
|
|
|
int sbreset __P((struct sb_softc *));
|
|
void sb_spkron __P((struct sb_softc *));
|
|
void sb_spkroff __P((struct sb_softc *));
|
|
|
|
static int wdsp(u_short iobase, int v);
|
|
static int rdsp(u_short iobase);
|
|
|
|
#define splsb splhigh /* XXX */
|
|
struct sb_softc *sb_softc; /* XXX */
|
|
|
|
#ifndef NEWCONFIG
|
|
#define at_dma(flags, ptr, cc, chan) isa_dmastart(flags, ptr, cc, chan)
|
|
#endif
|
|
|
|
struct {
|
|
int wdsp;
|
|
int rdsp;
|
|
int wmidi;
|
|
} sberr;
|
|
|
|
int sbintr __P((struct sb_softc *));
|
|
int sbprobe();
|
|
void sbattach();
|
|
#ifdef NEWCONFIG
|
|
void sbforceintr(void *);
|
|
#endif
|
|
|
|
struct cfdriver sbcd = {
|
|
NULL, "sb", sbprobe, sbattach, DV_DULL, sizeof(struct sb_softc)
|
|
};
|
|
|
|
int
|
|
sbprobe(parent, self, aux)
|
|
struct device *parent, *self;
|
|
void *aux;
|
|
{
|
|
register struct sb_softc *sc = (void *)self;
|
|
register struct isa_attach_args *ia = aux;
|
|
register u_short iobase = ia->ia_iobase;
|
|
|
|
if (!SB_BASE_VALID(ia->ia_iobase)) {
|
|
printf("sb: configured iobase %d invalid\n", ia->ia_iobase);
|
|
return 0;
|
|
}
|
|
sc->sc_iobase = iobase;
|
|
if (sbreset(sc) < 0) {
|
|
printf("sb: couldn't reset card\n");
|
|
return 0;
|
|
}
|
|
/*
|
|
* Cannot auto-discover DMA channel.
|
|
*/
|
|
if (!SB_DRQ_VALID(ia->ia_drq)) {
|
|
printf("sb: configured dma chan %d invalid\n", ia->ia_drq);
|
|
return 0;
|
|
}
|
|
#ifdef NEWCONFIG
|
|
/*
|
|
* If the IRQ wasn't compiled in, auto-detect it.
|
|
*/
|
|
if (ia->ia_irq == IRQUNK) {
|
|
ia->ia_irq = isa_discoverintr(sbforceintr, aux);
|
|
sbreset(iobase);
|
|
if (!SB_IRQ_VALID(ia->ia_irq)) {
|
|
printf("sb: couldn't auto-detect interrupt");
|
|
return 0;
|
|
}
|
|
} else
|
|
#endif
|
|
if (!SB_IRQ_VALID(ia->ia_irq)) {
|
|
int irq = ffs(ia->ia_irq) - 1;
|
|
printf("sb: configured irq %d invalid\n", irq);
|
|
return 0;
|
|
}
|
|
ia->ia_iosize = SB_NPORT;
|
|
return 1;
|
|
}
|
|
|
|
#ifdef NEWCONFIG
|
|
void
|
|
sbforceintr(aux)
|
|
void *aux;
|
|
{
|
|
static char dmabuf;
|
|
struct isa_attach_args *ia = aux;
|
|
u_short iobase = ia->ia_iobase;
|
|
|
|
/*
|
|
* Set up a DMA read of one byte.
|
|
* XXX Note that at this point we haven't called
|
|
* at_setup_dmachan(). This is okay because it just
|
|
* allocates a buffer in case it needs to make a copy,
|
|
* and it won't need to make a copy for a 1 byte buffer.
|
|
* (I think that calling at_setup_dmachan() should be optional;
|
|
* if you don't call it, it will be called the first time
|
|
* it is needed (and you pay the latency). Also, you might
|
|
* never need the buffer anyway.)
|
|
*/
|
|
at_dma(1, &dmabuf, 1, ia->ia_drq);
|
|
if (wdsp(iobase, SB_DSP_RDMA) == 0) {
|
|
(void)wdsp(iobase, 0);
|
|
(void)wdsp(iobase, 0);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
void
|
|
sbattach(parent, self, aux)
|
|
struct device *parent, *self;
|
|
void *aux;
|
|
{
|
|
register struct sb_softc *sc = (struct sb_softc *)self;
|
|
struct isa_attach_args *ia = (struct isa_attach_args *)aux;
|
|
register u_short iobase = ia->ia_iobase;
|
|
register int vers;
|
|
|
|
/* XXX */
|
|
sb_softc = sc;
|
|
|
|
sc->sc_iobase = iobase;
|
|
sc->sc_dmachan = ia->ia_drq;
|
|
sc->sc_locked = 0;
|
|
|
|
#ifdef NEWCONFIG
|
|
isa_establish(&sc->sc_id, &sc->sc_dev);
|
|
#endif
|
|
sc->sc_ih.ih_fun = sbintr;
|
|
sc->sc_ih.ih_arg = sc;
|
|
sc->sc_ih.ih_level = IPL_BIO;
|
|
intr_establish(ia->ia_irq, &sc->sc_ih);
|
|
|
|
#ifdef NEWCONFIG
|
|
/*
|
|
* We limit DMA transfers to a page, and use the generic DMA handling
|
|
* code in isa.c. This code can end up copying a buffer, but since
|
|
* the audio driver uses relative small buffers this isn't likely.
|
|
*
|
|
* This allocation scheme means that the maximum transfer is limited
|
|
* by the page size (rather than 64k). This is reasonable. For 4K
|
|
* pages, the transfer time at 48KHz is 4096 / 48000 = 85ms. This
|
|
* is plenty long enough to amortize any fixed time overhead.
|
|
*/
|
|
at_setup_dmachan(sc->sc_dmachan, NBPG);
|
|
#endif
|
|
|
|
vers = sbversion(sc);
|
|
printf(": dsp v%d.%d\n", vers >> 8, vers & 0xff);
|
|
}
|
|
|
|
#define SBUNIT(x) (minor(x) & 0xf)
|
|
|
|
struct sb_softc *
|
|
sbopen()
|
|
{
|
|
/* XXXX */
|
|
struct sb_softc *sc = sb_softc;
|
|
|
|
if (sc == 0)
|
|
return 0;
|
|
|
|
if (sc->sc_open == 0 && sbreset(sc) == 0) {
|
|
sc->sc_open = 1;
|
|
sc->sc_mintr = 0;
|
|
sc->sc_intr = 0;
|
|
return sc;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
sbclose(sc)
|
|
struct sb_softc *sc;
|
|
{
|
|
|
|
sc->sc_open = 0;
|
|
sb_spkroff(sc);
|
|
sc->sc_intr = 0;
|
|
sc->sc_mintr = 0;
|
|
/* XXX this will turn off any dma */
|
|
sbreset(sc);
|
|
}
|
|
|
|
/*
|
|
* Write a byte to the dsp.
|
|
* XXX We are at the mercy of the card as we use a
|
|
* polling loop and wait until it can take the byte.
|
|
*/
|
|
static int
|
|
wdsp(u_short iobase, int v)
|
|
{
|
|
register int i;
|
|
|
|
for (i = 100; --i >= 0; ) {
|
|
if ((inb(iobase + SBP_DSP_WSTAT) & SB_DSP_BUSY) != 0)
|
|
continue;
|
|
outb(iobase + SBP_DSP_WRITE, v);
|
|
return 0;
|
|
}
|
|
++sberr.wdsp;
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Read a byte from the DSP, using polling.
|
|
*/
|
|
int
|
|
rdsp(u_short iobase)
|
|
{
|
|
register int i;
|
|
|
|
for (i = 100; --i >= 0; ) {
|
|
if ((inb(iobase + SBP_DSP_RSTAT) & SB_DSP_READY) == 0)
|
|
continue;
|
|
return inb(iobase + SBP_DSP_READ);
|
|
}
|
|
++sberr.rdsp;
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Reset the card.
|
|
* Return non-zero if the card isn't detected.
|
|
*/
|
|
int
|
|
sbreset(sc)
|
|
struct sb_softc *sc;
|
|
{
|
|
register u_short iobase = sc->sc_iobase;
|
|
register int i;
|
|
|
|
/*
|
|
* See SBK, section 11.3.
|
|
* We pulse a reset signal into the card.
|
|
* Gee, what a brilliant hardware design.
|
|
*/
|
|
outb(iobase + SBP_DSP_RESET, 1);
|
|
delay(3);
|
|
outb(iobase + SBP_DSP_RESET, 0);
|
|
if (rdsp(iobase) != SB_MAGIC)
|
|
return -1;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Turn on the speaker. The SBK documention says this operation
|
|
* can take up to 1/10 of a second. Higher level layers should
|
|
* probably let the task sleep for this amount of time after
|
|
* calling here. Otherwise, things might not work (because
|
|
* wdsp() and rdsp() will probably timeout.)
|
|
*
|
|
* These engineers had their heads up their ass when
|
|
* they designed this card.
|
|
*/
|
|
void
|
|
sb_spkron(sc)
|
|
struct sb_softc *sc;
|
|
{
|
|
|
|
(void)wdsp(sc->sc_iobase, SB_DSP_SPKR_ON);
|
|
/* XXX bogus */
|
|
delay(1000);
|
|
}
|
|
|
|
/*
|
|
* Turn off the speaker; see comment above.
|
|
*/
|
|
void
|
|
sb_spkroff(sc)
|
|
struct sb_softc *sc;
|
|
{
|
|
|
|
(void)wdsp(sc->sc_iobase, SB_DSP_SPKR_OFF);
|
|
}
|
|
|
|
/*
|
|
* Read the version number out of the card. Return major code
|
|
* in high byte, and minor code in low byte.
|
|
*/
|
|
int
|
|
sbversion(sc)
|
|
struct sb_softc *sc;
|
|
{
|
|
register u_short iobase = sc->sc_iobase;
|
|
int v;
|
|
|
|
if (wdsp(iobase, SB_DSP_VERSION) < 0)
|
|
return 0;
|
|
v = rdsp(iobase) << 8;
|
|
v |= rdsp(iobase);
|
|
return ((v >= 0) ? v : 0);
|
|
}
|
|
|
|
/*
|
|
* Halt a DMA in progress. A low-speed transfer can be
|
|
* resumed with sb_contdma().
|
|
*/
|
|
void
|
|
sb_haltdma(sc)
|
|
struct sb_softc *sc;
|
|
{
|
|
|
|
if (sc->sc_locked)
|
|
sbreset(sc);
|
|
else
|
|
(void)wdsp(sc->sc_iobase, SB_DSP_HALT);
|
|
}
|
|
|
|
void
|
|
sb_contdma(sc)
|
|
struct sb_softc *sc;
|
|
{
|
|
|
|
(void)wdsp(sc->sc_iobase, SB_DSP_CONT);
|
|
}
|
|
|
|
/*
|
|
* Time constant routines follow. See SBK, section 12.
|
|
* Although they don't come out and say it (in the docs),
|
|
* the card clearly uses a 1MHz countdown timer, as the
|
|
* low-speed formula (p. 12-4) is:
|
|
* tc = 256 - 10^6 / sr
|
|
* In high-speed mode, the constant is the upper byte of a 16-bit counter,
|
|
* and a 256MHz clock is used:
|
|
* tc = 65536 - 256 * 10^ 6 / sr
|
|
* Since we can only use the upper byte of the HS TC, the two formulae
|
|
* are equivalent. (Why didn't they say so?) E.g.,
|
|
* (65536 - 256 * 10 ^ 6 / x) >> 8 = 256 - 10^6 / x
|
|
*
|
|
* The crossover point (from low- to high-speed modes) is different
|
|
* for the SBPRO and SB20. The table on p. 12-5 gives the following data:
|
|
*
|
|
* SBPRO SB20
|
|
* ----- --------
|
|
* input ls min 4 KHz 4 HJz
|
|
* input ls max 23 KHz 13 KHz
|
|
* input hs max 44.1 KHz 15 KHz
|
|
* output ls min 4 KHz 4 KHz
|
|
* output ls max 23 KHz 23 KHz
|
|
* output hs max 44.1 KHz 44.1 KHz
|
|
*/
|
|
#define SB_LS_MIN 0x06 /* 4000 Hz */
|
|
#ifdef SBPRO
|
|
#define SB_ADC_LS_MAX 0xd4 /* 22727 Hz */
|
|
#define SB_ADC_HS_MAX 0xe9 /* 43478 Hz */
|
|
#else
|
|
#define SB_ADC_LS_MAX 0xb3 /* 12987 Hz */
|
|
#define SB_ADC_HS_MAX 0xbd /* 14925 Hz */
|
|
#endif
|
|
#define SB_DAC_LS_MAX 0xd4 /* 22727 Hz */
|
|
#define SB_DAC_HS_MAX 0xe9 /* 43478 Hz */
|
|
|
|
/*
|
|
* Convert a linear sampling rate into the DAC time constant.
|
|
* Set *mode to indicate the high/low-speed DMA operation.
|
|
* Because of limitations of the card, not all rates are possible.
|
|
* We return the time constant of the closest possible rate.
|
|
* The sampling rate limits are different for the DAC and ADC,
|
|
* so isdac indicates output, and !isdac indicates input.
|
|
*/
|
|
int
|
|
sb_srtotc(sr, mode, isdac)
|
|
int sr;
|
|
int *mode;
|
|
int isdac;
|
|
{
|
|
register int tc = 256 - 1000000 / sr;
|
|
|
|
if (tc < SB_LS_MIN) {
|
|
tc = SB_LS_MIN;
|
|
*mode = SB_ADAC_LS;
|
|
} else if (isdac) {
|
|
if (tc < SB_DAC_LS_MAX)
|
|
*mode = SB_ADAC_LS;
|
|
else {
|
|
*mode = SB_ADAC_HS;
|
|
if (tc > SB_DAC_HS_MAX)
|
|
tc = SB_DAC_HS_MAX;
|
|
}
|
|
} else {
|
|
if (tc < SB_ADC_LS_MAX)
|
|
*mode = SB_ADAC_LS;
|
|
else {
|
|
*mode = SB_ADAC_HS;
|
|
if (tc > SB_ADC_HS_MAX)
|
|
tc = SB_ADC_HS_MAX;
|
|
}
|
|
}
|
|
return tc;
|
|
}
|
|
|
|
/*
|
|
* Convert a DAC time constant to a sampling rate.
|
|
* See SBK, section 12.
|
|
*/
|
|
int
|
|
sb_tctosr(tc)
|
|
int tc;
|
|
{
|
|
return (1000000 / (256 - tc));
|
|
}
|
|
|
|
int
|
|
sb_set_sr(sc, sr, isdac)
|
|
register struct sb_softc *sc;
|
|
u_long *sr;
|
|
int isdac;
|
|
{
|
|
register int tc;
|
|
int mode;
|
|
|
|
tc = sb_srtotc(*sr, &mode, isdac);
|
|
if (wdsp(sc->sc_iobase, SB_DSP_TIMECONST) < 0 ||
|
|
wdsp(sc->sc_iobase, tc) < 0)
|
|
return -1;
|
|
|
|
*sr = sb_tctosr(tc);
|
|
sc->sc_adacmode = mode;
|
|
sc->sc_adactc = tc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
sb_round_sr(sr, isdac)
|
|
u_long sr;
|
|
int isdac;
|
|
{
|
|
int mode, tc;
|
|
|
|
tc = sb_srtotc(sr, &mode, isdac);
|
|
return sb_tctosr(tc);
|
|
}
|
|
|
|
int
|
|
sb_dma_input(sc, p, cc, intr, arg)
|
|
struct sb_softc *sc;
|
|
void *p;
|
|
int cc;
|
|
void (*intr)();
|
|
void *arg;
|
|
{
|
|
register u_short iobase;
|
|
|
|
at_dma(1, p, cc, sc->sc_dmachan);
|
|
sc->sc_intr = intr;
|
|
sc->sc_arg = arg;
|
|
iobase = sc->sc_iobase;
|
|
--cc;
|
|
if (sc->sc_adacmode == SB_ADAC_LS) {
|
|
if (wdsp(iobase, SB_DSP_RDMA) < 0 ||
|
|
wdsp(iobase, cc) < 0 ||
|
|
wdsp(iobase, cc >> 8) < 0) {
|
|
sbreset(sc);
|
|
return EIO;
|
|
}
|
|
} else {
|
|
if (wdsp(iobase, SB_DSP_BLOCKSIZE) < 0 ||
|
|
wdsp(iobase, cc) < 0 ||
|
|
wdsp(iobase, cc >> 8) < 0 ||
|
|
wdsp(iobase, SB_DSP_HS_INPUT) < 0) {
|
|
sbreset(sc);
|
|
return EIO;
|
|
}
|
|
sc->sc_locked = 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
sb_dma_output(sc, p, cc, intr, arg)
|
|
struct sb_softc *sc;
|
|
void *p;
|
|
int cc;
|
|
void (*intr)();
|
|
void *arg;
|
|
{
|
|
register u_short iobase;
|
|
|
|
at_dma(0, p, cc, sc->sc_dmachan);
|
|
sc->sc_intr = intr;
|
|
sc->sc_arg = arg;
|
|
iobase = sc->sc_iobase;
|
|
--cc;
|
|
if (sc->sc_adacmode == SB_ADAC_LS) {
|
|
if (wdsp(iobase, SB_DSP_WDMA) < 0 ||
|
|
wdsp(iobase, cc) < 0 ||
|
|
wdsp(iobase, cc >> 8) < 0) {
|
|
sbreset(sc);
|
|
return EIO;
|
|
}
|
|
} else {
|
|
if (wdsp(iobase, SB_DSP_BLOCKSIZE) < 0 ||
|
|
wdsp(iobase, cc) < 0 ||
|
|
wdsp(iobase, cc >> 8) < 0 ||
|
|
wdsp(iobase, SB_DSP_HS_OUTPUT) < 0) {
|
|
sbreset(sc);
|
|
return EIO;
|
|
}
|
|
sc->sc_locked = 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Only the DSP unit on the sound blaster generates interrupts.
|
|
* There are three cases of interrupt: reception of a midi byte
|
|
* (when mode is enabled), completion of dma transmission, or
|
|
* completion of a dma reception. The three modes are mutually
|
|
* exclusive so we know a priori which event has occurred.
|
|
*/
|
|
int
|
|
sbintr(sc)
|
|
register struct sb_softc *sc;
|
|
{
|
|
|
|
sc->sc_locked = 0;
|
|
/* clear interrupt */
|
|
inb(sc->sc_iobase + SBP_DSP_RSTAT);
|
|
if (sc->sc_mintr != 0) {
|
|
int c = rdsp(sc->sc_iobase);
|
|
(*sc->sc_mintr)(sc->sc_arg, c);
|
|
} else if (sc->sc_intr != 0)
|
|
(*sc->sc_intr)(sc->sc_arg);
|
|
else
|
|
return 0;
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Enter midi uart mode and arrange for read interrupts
|
|
* to vector to `intr'. This puts the card in a mode
|
|
* which allows only midi I/O; the card must be reset
|
|
* to leave this mode. Unfortunately, the card does not
|
|
* use transmit interrupts, so bytes must be output
|
|
* using polling. To keep the polling overhead to a
|
|
* minimum, output should be driven off a timer.
|
|
* This is a little tricky since only 320us separate
|
|
* consecutive midi bytes.
|
|
*/
|
|
void
|
|
sb_set_midi_mode(sc, intr, arg)
|
|
struct sb_softc *sc;
|
|
void (*intr)();
|
|
void *arg;
|
|
{
|
|
|
|
wdsp(sc->sc_iobase, SB_MIDI_UART_INTR);
|
|
sc->sc_mintr = intr;
|
|
sc->sc_intr = 0;
|
|
sc->sc_arg = arg;
|
|
}
|
|
|
|
/*
|
|
* Write a byte to the midi port, when in midi uart mode.
|
|
*/
|
|
void
|
|
sb_midi_output(sc, v)
|
|
struct sb_softc *sc;
|
|
int v;
|
|
{
|
|
|
|
if (wdsp(sc->sc_iobase, v) < 0)
|
|
++sberr.wmidi;
|
|
}
|