573 lines
17 KiB
C
573 lines
17 KiB
C
/* $NetBSD: if_ie_vme.c,v 1.31 2014/08/18 04:26:38 riastradh Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1995 Charles D. Cranor
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Converted to SUN ie driver by Charles D. Cranor,
|
|
* October 1994, January 1995.
|
|
*/
|
|
|
|
/*
|
|
* The i82586 is a very painful chip, found in sun3's, sun-4/100's
|
|
* sun-4/200's, and VME based suns. The byte order is all wrong for a
|
|
* SUN, making life difficult. Programming this chip is mostly the same,
|
|
* but certain details differ from system to system. This driver is
|
|
* written so that different "ie" interfaces can be controled by the same
|
|
* driver.
|
|
*/
|
|
|
|
/*
|
|
* programming notes:
|
|
*
|
|
* the ie chip operates in a 24 bit address space.
|
|
*
|
|
* most ie interfaces appear to be divided into two parts:
|
|
* - generic 586 stuff
|
|
* - board specific
|
|
*
|
|
* generic:
|
|
* the generic stuff of the ie chip is all done with data structures
|
|
* that live in the chip's memory address space. the chip expects
|
|
* its main data structure (the sys conf ptr -- SCP) to be at a fixed
|
|
* address in its 24 bit space: 0xfffff4
|
|
*
|
|
* the SCP points to another structure called the ISCP.
|
|
* the ISCP points to another structure called the SCB.
|
|
* the SCB has a status field, a linked list of "commands", and
|
|
* a linked list of "receive buffers". these are data structures that
|
|
* live in memory, not registers.
|
|
*
|
|
* board:
|
|
* to get the chip to do anything, you first put a command in the
|
|
* command data structure list. then you have to signal "attention"
|
|
* to the chip to get it to look at the command. how you
|
|
* signal attention depends on what board you have... on PC's
|
|
* there is an i/o port number to do this, on sun's there is a
|
|
* register bit you toggle.
|
|
*
|
|
* to get data from the chip you program it to interrupt...
|
|
*
|
|
*
|
|
* sun issues:
|
|
*
|
|
* there are 3 kinds of sun "ie" interfaces:
|
|
* 1 - a VME/multibus card
|
|
* 2 - an on-board interface (sun3's, sun-4/100's, and sun-4/200's)
|
|
* 3 - another VME board called the 3E
|
|
*
|
|
* the VME boards lives in vme16 space. only 16 and 8 bit accesses
|
|
* are allowed, so functions that copy data must be aware of this.
|
|
*
|
|
* the chip is an intel chip. this means that the byte order
|
|
* on all the "short"s in the chip's data structures is wrong.
|
|
* so, constants described in the intel docs are swapped for the sun.
|
|
* that means that any buffer pointers you give the chip must be
|
|
* swapped to intel format. yuck.
|
|
*
|
|
* VME/multibus interface:
|
|
* for the multibus interface the board ignores the top 4 bits
|
|
* of the chip address. the multibus interface has its own
|
|
* MMU like page map (without protections or valid bits, etc).
|
|
* there are 256 pages of physical memory on the board (each page
|
|
* is 1024 bytes). There are 1024 slots in the page map. so,
|
|
* a 1024 byte page takes up 10 bits of address for the offset,
|
|
* and if there are 1024 slots in the page that is another 10 bits
|
|
* of the address. That makes a 20 bit address, and as stated
|
|
* earlier the board ignores the top 4 bits, so that accounts
|
|
* for all 24 bits of address.
|
|
*
|
|
* Note that the last entry of the page map maps the top of the
|
|
* 24 bit address space and that the SCP is supposed to be at
|
|
* 0xfffff4 (taking into account allignment). so,
|
|
* for multibus, that entry in the page map has to be used for the SCP.
|
|
*
|
|
* The page map effects BOTH how the ie chip sees the
|
|
* memory, and how the host sees it.
|
|
*
|
|
* The page map is part of the "register" area of the board
|
|
*
|
|
* The page map to control where ram appears in the address space.
|
|
* We choose to have RAM start at 0 in the 24 bit address space.
|
|
*
|
|
* to get the phyiscal address of the board's RAM you must take the
|
|
* top 12 bits of the physical address of the register address and
|
|
* or in the 4 bits from the status word as bits 17-20 (remember that
|
|
* the board ignores the chip's top 4 address lines). For example:
|
|
* if the register is @ 0xffe88000, then the top 12 bits are 0xffe00000.
|
|
* to get the 4 bits from the status word just do status & IEVME_HADDR.
|
|
* suppose the value is "4". Then just shift it left 16 bits to get
|
|
* it into bits 17-20 (e.g. 0x40000). Then or it to get the
|
|
* address of RAM (in our example: 0xffe40000). see the attach routine!
|
|
*
|
|
*
|
|
* on-board interface:
|
|
*
|
|
* on the onboard ie interface the 24 bit address space is hardwired
|
|
* to be 0xff000000 -> 0xffffffff of KVA. this means that sc_iobase
|
|
* will be 0xff000000. sc_maddr will be where ever we allocate RAM
|
|
* in KVA. note that since the SCP is at a fixed address it means
|
|
* that we have to allocate a fixed KVA for the SCP.
|
|
* <fill in useful info later>
|
|
*
|
|
*
|
|
* VME3E interface:
|
|
*
|
|
* <fill in useful info later>
|
|
*
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: if_ie_vme.c,v 1.31 2014/08/18 04:26:38 riastradh Exp $");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/device.h>
|
|
#include <sys/protosw.h>
|
|
#include <sys/socket.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_types.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_ether.h>
|
|
|
|
#include <sys/bus.h>
|
|
#include <sys/intr.h>
|
|
#include <dev/vme/vmevar.h>
|
|
|
|
#include <dev/ic/i82586reg.h>
|
|
#include <dev/ic/i82586var.h>
|
|
|
|
#include "locators.h"
|
|
|
|
/*
|
|
* VME/multibus definitions
|
|
*/
|
|
#define IEVME_PAGESIZE 1024 /* bytes */
|
|
#define IEVME_PAGSHIFT 10 /* bits */
|
|
#define IEVME_NPAGES 256 /* number of pages on chip */
|
|
#define IEVME_MAPSZ 1024 /* number of entries in the map */
|
|
|
|
/*
|
|
* PTE for the page map
|
|
*/
|
|
#define IEVME_SBORDR 0x8000 /* sun byte order */
|
|
#define IEVME_IBORDR 0x0000 /* intel byte ordr */
|
|
|
|
#define IEVME_P2MEM 0x2000 /* memory is on P2 */
|
|
#define IEVME_OBMEM 0x0000 /* memory is on board */
|
|
|
|
#define IEVME_PGMASK 0x0fff /* gives the physical page frame number */
|
|
|
|
struct ievme {
|
|
u_int16_t pgmap[IEVME_MAPSZ];
|
|
u_int16_t xxx[32]; /* prom */
|
|
u_int16_t status; /* see below for bits */
|
|
u_int16_t xxx2; /* filler */
|
|
u_int16_t pectrl; /* parity control (see below) */
|
|
u_int16_t peaddr; /* low 16 bits of address */
|
|
};
|
|
|
|
/*
|
|
* status bits
|
|
*/
|
|
#define IEVME_RESET 0x8000 /* reset board */
|
|
#define IEVME_ONAIR 0x4000 /* go out of loopback 'on-air' */
|
|
#define IEVME_ATTEN 0x2000 /* attention */
|
|
#define IEVME_IENAB 0x1000 /* interrupt enable */
|
|
#define IEVME_PEINT 0x0800 /* parity error interrupt enable */
|
|
#define IEVME_PERR 0x0200 /* parity error flag */
|
|
#define IEVME_INT 0x0100 /* interrupt flag */
|
|
#define IEVME_P2EN 0x0020 /* enable p2 bus */
|
|
#define IEVME_256K 0x0010 /* 256kb rams */
|
|
#define IEVME_HADDR 0x000f /* mask for bits 17-20 of address */
|
|
|
|
/*
|
|
* parity control
|
|
*/
|
|
#define IEVME_PARACK 0x0100 /* parity error ack */
|
|
#define IEVME_PARSRC 0x0080 /* parity error source */
|
|
#define IEVME_PAREND 0x0040 /* which end of the data got the error */
|
|
#define IEVME_PARADR 0x000f /* mask to get bits 17-20 of parity address */
|
|
|
|
/* Supported media */
|
|
static int media[] = {
|
|
IFM_ETHER | IFM_10_2,
|
|
};
|
|
#define NMEDIA (sizeof(media) / sizeof(media[0]))
|
|
|
|
/*
|
|
* the 3E board not supported (yet?)
|
|
*/
|
|
|
|
|
|
static void ie_vmereset(struct ie_softc *, int);
|
|
static void ie_vmeattend(struct ie_softc *, int);
|
|
static void ie_vmerun(struct ie_softc *);
|
|
static int ie_vmeintr(struct ie_softc *, int);
|
|
|
|
int ie_vme_match(device_t, cfdata_t, void *);
|
|
void ie_vme_attach(device_t, device_t, void *);
|
|
|
|
struct ie_vme_softc {
|
|
struct ie_softc ie;
|
|
bus_space_tag_t ievt;
|
|
bus_space_handle_t ievh;
|
|
};
|
|
|
|
CFATTACH_DECL_NEW(ie_vme, sizeof(struct ie_vme_softc),
|
|
ie_vme_match, ie_vme_attach, NULL, NULL);
|
|
|
|
#define read_iev(sc, reg) \
|
|
bus_space_read_2(sc->ievt, sc->ievh, offsetof(struct ievme, reg))
|
|
#define write_iev(sc, reg, val) \
|
|
bus_space_write_2(sc->ievt, sc->ievh, offsetof(struct ievme, reg), val)
|
|
|
|
/*
|
|
* MULTIBUS/VME support routines
|
|
*/
|
|
void
|
|
ie_vmereset(struct ie_softc *sc, int what)
|
|
{
|
|
struct ie_vme_softc *vsc = (struct ie_vme_softc *)sc;
|
|
write_iev(vsc, status, IEVME_RESET);
|
|
delay(100); /* XXX could be shorter? */
|
|
write_iev(vsc, status, 0);
|
|
}
|
|
|
|
void
|
|
ie_vmeattend(struct ie_softc *sc, int why)
|
|
{
|
|
struct ie_vme_softc *vsc = (struct ie_vme_softc *)sc;
|
|
|
|
/* flag! */
|
|
write_iev(vsc, status, read_iev(vsc, status) | IEVME_ATTEN);
|
|
/* down. */
|
|
write_iev(vsc, status, read_iev(vsc, status) & ~IEVME_ATTEN);
|
|
}
|
|
|
|
void
|
|
ie_vmerun(struct ie_softc *sc)
|
|
{
|
|
struct ie_vme_softc *vsc = (struct ie_vme_softc *)sc;
|
|
|
|
write_iev(vsc, status, read_iev(vsc, status)
|
|
| IEVME_ONAIR | IEVME_IENAB | IEVME_PEINT);
|
|
}
|
|
|
|
int
|
|
ie_vmeintr(struct ie_softc *sc, int where)
|
|
{
|
|
struct ie_vme_softc *vsc = (struct ie_vme_softc *)sc;
|
|
|
|
if (where != INTR_ENTER)
|
|
return (0);
|
|
|
|
/*
|
|
* check for parity error
|
|
*/
|
|
if (read_iev(vsc, status) & IEVME_PERR) {
|
|
aprint_error_dev(sc->sc_dev, "parity error (ctrl 0x%x @ 0x%02x%04x)\n",
|
|
read_iev(vsc, pectrl),
|
|
read_iev(vsc, pectrl) & IEVME_HADDR,
|
|
read_iev(vsc, peaddr));
|
|
write_iev(vsc, pectrl, read_iev(vsc, pectrl) | IEVME_PARACK);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
void ie_memcopyin(struct ie_softc *, void *, int, size_t);
|
|
void ie_memcopyout(struct ie_softc *, const void *, int, size_t);
|
|
|
|
/*
|
|
* Copy board memory to kernel.
|
|
*/
|
|
void
|
|
ie_memcopyin(struct ie_softc *sc, void *p, int offset, size_t size)
|
|
{
|
|
size_t help;
|
|
|
|
if ((offset & 1) && ((u_long)p & 1) && size > 0) {
|
|
*(u_int8_t *)p = bus_space_read_1(sc->bt, sc->bh, offset);
|
|
offset++;
|
|
p = (u_int8_t *)p + 1;
|
|
size--;
|
|
}
|
|
|
|
if ((offset & 1) || ((u_long)p & 1)) {
|
|
bus_space_read_region_1(sc->bt, sc->bh, offset, p, size);
|
|
return;
|
|
}
|
|
|
|
help = size / 2;
|
|
bus_space_read_region_2(sc->bt, sc->bh, offset, p, help);
|
|
if (2 * help == size)
|
|
return;
|
|
|
|
offset += 2 * help;
|
|
p = (u_int16_t *)p + help;
|
|
*(u_int8_t *)p = bus_space_read_1(sc->bt, sc->bh, offset);
|
|
}
|
|
|
|
/*
|
|
* Copy from kernel space to board memory.
|
|
*/
|
|
void
|
|
ie_memcopyout(struct ie_softc *sc, const void *p, int offset, size_t size)
|
|
{
|
|
size_t help;
|
|
|
|
if ((offset & 1) && ((u_long)p & 1) && size > 0) {
|
|
bus_space_write_1(sc->bt, sc->bh, offset, *(const u_int8_t *)p);
|
|
offset++;
|
|
p = (const u_int8_t *)p + 1;
|
|
size--;
|
|
}
|
|
|
|
if ((offset & 1) || ((u_long)p & 1)) {
|
|
bus_space_write_region_1(sc->bt, sc->bh, offset, p, size);
|
|
return;
|
|
}
|
|
|
|
help = size / 2;
|
|
bus_space_write_region_2(sc->bt, sc->bh, offset, p, help);
|
|
if (2 * help == size)
|
|
return;
|
|
|
|
offset += 2 * help;
|
|
p = (const u_int16_t *)p + help;
|
|
bus_space_write_1(sc->bt, sc->bh, offset, *(const u_int8_t *)p);
|
|
}
|
|
|
|
/* read a 16-bit value at BH offset */
|
|
u_int16_t ie_vme_read16(struct ie_softc *, int offset);
|
|
/* write a 16-bit value at BH offset */
|
|
void ie_vme_write16(struct ie_softc *, int offset, u_int16_t value);
|
|
void ie_vme_write24(struct ie_softc *, int offset, int addr);
|
|
|
|
u_int16_t
|
|
ie_vme_read16(struct ie_softc *sc, int offset)
|
|
{
|
|
u_int16_t v;
|
|
|
|
bus_space_barrier(sc->bt, sc->bh, offset, 2, BUS_SPACE_BARRIER_READ);
|
|
v = bus_space_read_2(sc->bt, sc->bh, offset);
|
|
return (((v&0xff)<<8) | ((v>>8)&0xff));
|
|
}
|
|
|
|
void
|
|
ie_vme_write16(struct ie_softc *sc, int offset, u_int16_t v)
|
|
{
|
|
int v0 = ((((v)&0xff)<<8) | (((v)>>8)&0xff));
|
|
bus_space_write_2(sc->bt, sc->bh, offset, v0);
|
|
bus_space_barrier(sc->bt, sc->bh, offset, 2, BUS_SPACE_BARRIER_WRITE);
|
|
}
|
|
|
|
void
|
|
ie_vme_write24(struct ie_softc *sc, int offset, int addr)
|
|
{
|
|
u_char *f = (u_char *)&addr;
|
|
u_int16_t v0, v1;
|
|
u_char *t;
|
|
|
|
t = (u_char *)&v0;
|
|
t[0] = f[3]; t[1] = f[2];
|
|
bus_space_write_2(sc->bt, sc->bh, offset, v0);
|
|
|
|
t = (u_char *)&v1;
|
|
t[0] = f[1]; t[1] = 0;
|
|
bus_space_write_2(sc->bt, sc->bh, offset+2, v1);
|
|
|
|
bus_space_barrier(sc->bt, sc->bh, offset, 4, BUS_SPACE_BARRIER_WRITE);
|
|
}
|
|
|
|
int
|
|
ie_vme_match(device_t parent, cfdata_t cf, void *aux)
|
|
{
|
|
struct vme_attach_args *va = aux;
|
|
vme_chipset_tag_t ct = va->va_vct;
|
|
vme_am_t mod;
|
|
int error;
|
|
|
|
if (va->numcfranges < 2) {
|
|
printf("ie_vme_match: need 2 ranges\n");
|
|
return (0);
|
|
}
|
|
if ((va->r[1].offset & 0xff0fffff) ||
|
|
((va->r[0].offset & 0xfff00000)
|
|
!= (va->r[1].offset & 0xfff00000))) {
|
|
printf("ie_vme_match: base address mismatch\n");
|
|
return (0);
|
|
}
|
|
if (va->r[0].size != VMECF_LEN_DEFAULT &&
|
|
va->r[0].size != sizeof(struct ievme)) {
|
|
printf("ie_vme_match: bad csr size\n");
|
|
return (0);
|
|
}
|
|
if (va->r[1].size == VMECF_LEN_DEFAULT) {
|
|
printf("ie_vme_match: must specify memory size\n");
|
|
return (0);
|
|
}
|
|
|
|
mod = 0x3d; /* VME_AM_A24|VME_AM_MBO|VME_AM_SUPER|VME_AM_DATA */
|
|
|
|
if (va->r[0].am != VMECF_AM_DEFAULT &&
|
|
va->r[0].am != mod)
|
|
return (0);
|
|
|
|
if (vme_space_alloc(va->va_vct, va->r[0].offset,
|
|
sizeof(struct ievme), mod))
|
|
return (0);
|
|
if (vme_space_alloc(va->va_vct, va->r[1].offset,
|
|
va->r[1].size, mod)) {
|
|
vme_space_free(va->va_vct, va->r[0].offset,
|
|
sizeof(struct ievme), mod);
|
|
return (0);
|
|
}
|
|
error = vme_probe(ct, va->r[0].offset, 2, mod, VME_D16, 0, 0);
|
|
vme_space_free(va->va_vct, va->r[0].offset, sizeof(struct ievme), mod);
|
|
vme_space_free(va->va_vct, va->r[1].offset, va->r[1].size, mod);
|
|
|
|
return (error == 0);
|
|
}
|
|
|
|
void
|
|
ie_vme_attach(device_t parent, device_t self, void *aux)
|
|
{
|
|
u_int8_t myaddr[ETHER_ADDR_LEN];
|
|
struct ie_vme_softc *vsc = device_private(self);
|
|
struct vme_attach_args *va = aux;
|
|
vme_chipset_tag_t ct = va->va_vct;
|
|
struct ie_softc *sc;
|
|
vme_intr_handle_t ih;
|
|
vme_addr_t rampaddr;
|
|
vme_size_t memsize;
|
|
vme_mapresc_t resc;
|
|
int lcv;
|
|
prop_data_t eaddrprop;
|
|
vme_am_t mod;
|
|
|
|
/*
|
|
* *note*: we don't detect the difference between a VME3E and
|
|
* a multibus/vme card. if you want to use a 3E you'll have
|
|
* to fix this.
|
|
*/
|
|
mod = 0x3d; /* VME_AM_A24|VME_AM_MBO|VME_AM_SUPER|VME_AM_DATA */
|
|
if (vme_space_alloc(va->va_vct, va->r[0].offset,
|
|
sizeof(struct ievme), mod) ||
|
|
vme_space_alloc(va->va_vct, va->r[1].offset,
|
|
va->r[1].size, mod))
|
|
panic("if_ie: vme alloc");
|
|
|
|
sc = &vsc->ie;
|
|
sc->sc_dev = self;
|
|
|
|
sc->hwreset = ie_vmereset;
|
|
sc->hwinit = ie_vmerun;
|
|
sc->chan_attn = ie_vmeattend;
|
|
sc->intrhook = ie_vmeintr;
|
|
sc->memcopyout = ie_memcopyout;
|
|
sc->memcopyin = ie_memcopyin;
|
|
|
|
sc->ie_bus_barrier = NULL;
|
|
sc->ie_bus_read16 = ie_vme_read16;
|
|
sc->ie_bus_write16 = ie_vme_write16;
|
|
sc->ie_bus_write24 = ie_vme_write24;
|
|
|
|
memsize = va->r[1].size;
|
|
|
|
if (vme_space_map(ct, va->r[0].offset, sizeof(struct ievme), mod,
|
|
VME_D16 | VME_D8, 0,
|
|
&vsc->ievt, &vsc->ievh, &resc) != 0)
|
|
panic("if_ie: vme map csr");
|
|
|
|
rampaddr = va->r[1].offset;
|
|
|
|
/* 4 more */
|
|
rampaddr = rampaddr | ((read_iev(vsc, status) & IEVME_HADDR) << 16);
|
|
if (vme_space_map(ct, rampaddr, memsize, mod, VME_D16 | VME_D8, 0,
|
|
&sc->bt, &sc->bh, &resc) != 0)
|
|
panic("if_ie: vme map mem");
|
|
|
|
write_iev(vsc, pectrl, read_iev(vsc, pectrl) | IEVME_PARACK);
|
|
|
|
/*
|
|
* Set up mappings, direct map except for last page
|
|
* which is mapped at zero and at high address (for scp)
|
|
*/
|
|
for (lcv = 0; lcv < IEVME_MAPSZ - 1; lcv++)
|
|
write_iev(vsc, pgmap[lcv], IEVME_SBORDR | IEVME_OBMEM | lcv);
|
|
write_iev(vsc, pgmap[IEVME_MAPSZ - 1], IEVME_SBORDR | IEVME_OBMEM | 0);
|
|
|
|
/* Clear all ram */
|
|
bus_space_set_region_2(sc->bt, sc->bh, 0, 0, memsize/2);
|
|
|
|
/*
|
|
* We use the first page to set up SCP, ICSP and SCB data
|
|
* structures. The remaining pages become the buffer area
|
|
* (managed in i82586.c).
|
|
* SCP is in double-mapped page, so the 586 can see it at
|
|
* the mandatory magic address (IE_SCP_ADDR).
|
|
*/
|
|
sc->scp = (IE_SCP_ADDR & (IEVME_PAGESIZE - 1));
|
|
|
|
/* iscp at location zero */
|
|
sc->iscp = 0;
|
|
|
|
/* scb follows iscp */
|
|
sc->scb = IE_ISCP_SZ;
|
|
|
|
ie_vme_write16(sc, IE_ISCP_SCB((long)sc->iscp), sc->scb);
|
|
ie_vme_write16(sc, IE_ISCP_BASE((u_long)sc->iscp), 0);
|
|
ie_vme_write24(sc, IE_SCP_ISCP((u_long)sc->scp), 0);
|
|
|
|
if (i82586_proberam(sc) == 0) {
|
|
printf(": memory probe failed\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Rest of first page is unused; rest of ram for buffers.
|
|
*/
|
|
sc->buf_area = IEVME_PAGESIZE;
|
|
sc->buf_area_sz = memsize - IEVME_PAGESIZE;
|
|
|
|
sc->do_xmitnopchain = 0;
|
|
|
|
printf("\n%s:", device_xname(self));
|
|
|
|
eaddrprop = prop_dictionary_get(device_properties(self), "mac-address");
|
|
if (eaddrprop != NULL && prop_data_size(eaddrprop) == ETHER_ADDR_LEN)
|
|
memcpy(myaddr, prop_data_data_nocopy(eaddrprop),
|
|
ETHER_ADDR_LEN);
|
|
|
|
i82586_attach(sc, "multibus/vme", myaddr, media, NMEDIA, media[0]);
|
|
|
|
vme_intr_map(ct, va->ilevel, va->ivector, &ih);
|
|
vme_intr_establish(ct, ih, IPL_NET, i82586_intr, sc);
|
|
}
|