NetBSD/sys/dev/mii/rgephyreg.h

90 lines
3.7 KiB
C

/* $NetBSD: rgephyreg.h,v 1.10 2018/06/19 10:36:41 jmcneill Exp $ */
/*
* Copyright (c) 2003
* Bill Paul <wpaul@windriver.com>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD: /repoman/r/ncvs/src/sys/dev/mii/rgephyreg.h,v 1.1 2003/09/11 03:53:46 wpaul Exp $
*/
#ifndef _DEV_MII_RGEPHYREG_H_
#define _DEV_MII_RGEPHYREG_H_
#define RGEPHY_8211B 2
#define RGEPHY_8211C 3
#define RGEPHY_8211E 5
#define RGEPHY_8211F 6
/*
* RealTek 8169S/8110S gigE PHY registers
*/
/* RTL8211B(L)/RTL8211C(L) */
#define RGEPHY_MII_SSR 0x11 /* PHY Specific status register */
#define RGEPHY_SSR_S1000 0x8000 /* 1000Mbps */
#define RGEPHY_SSR_S100 0x4000 /* 100Mbps */
#define RGEPHY_SSR_S10 0x0000 /* 10Mbps */
#define RGEPHY_SSR_SPD_MASK 0xc000
#define RGEPHY_SSR_FDX 0x2000 /* full duplex */
#define RGEPHY_SSR_PAGE_RECEIVED 0x1000 /* new page received */
#define RGEPHY_SSR_SPD_DPLX_RESOLVED 0x0800 /* speed/duplex resolved */
#define RGEPHY_SSR_LINK 0x0400 /* link up */
#define RGEPHY_SSR_MDI_XOVER 0x0040 /* MDI crossover */
#define RGEPHY_SSR_ALDPS 0x0008 /* RTL8211C(L) only */
#define RGEPHY_SSR_JABBER 0x0001 /* Jabber */
/* RTL8211F */
#define RGEPHY_MII_PHYCR1 0x18 /* PHY Specific control register 1 */
#define RGEPHY_PHYCR1_MDI_MMCE __BIT(9)
#define RGEPHY_PHYCR1_ALDPS_EN __BIT(2)
#define RGEPHY_MII_MACR 0x0d /* MMD Access control register */
#define RGEPHY_MACR_FUNCTION __BITS(15,14)
#define RGEPHY_MACR_DEVAD __BITS(4,0)
#define RGEPHY_MII_MAADR 0x0e /* MMD Access address data register */
#define RGEPHY_MII_PHYSR 0x1a /* PHY Specific status register */
#define RGEPHY_PHYSR_ALDPS __BIT(14)
#define RGEPHY_PHYSR_MDI_PLUG __BIT(13)
#define RGEPHY_PHYSR_NWAY_EN __BIT(12)
#define RGEPHY_PHYSR_MASTER __BIT(11)
#define RGEPHY_PHYSR_EEE __BIT(8)
#define RGEPHY_PHYSR_RXFLOW_EN __BIT(7)
#define RGEPHY_PHYSR_TXFLOW_EN __BIT(6)
#define RGEPHY_PHYSR_SPEED __BITS(5,4)
#define RGEPHY_PHYSR_SPEED_10 0
#define RGEPHY_PHYSR_SPEED_100 1
#define RGEPHY_PHYSR_SPEED_1000 2
#define RGEPHY_PHYSR_DUPLEX __BIT(3)
#define RGEPHY_PHYSR_LINK __BIT(2)
#define RGEPHY_PHYSR_MDI_XOVER __BIT(1)
#define RGEPHY_PHYSR_JABBER __BIT(0)
#endif /* _DEV_MII_RGEPHYREG_H_ */