4050 lines
115 KiB
C
4050 lines
115 KiB
C
/* $NetBSD: mvsata.c,v 1.40 2018/04/08 11:57:43 mlelstv Exp $ */
|
|
/*
|
|
* Copyright (c) 2008 KIYOHARA Takashi
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
|
|
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: mvsata.c,v 1.40 2018/04/08 11:57:43 mlelstv Exp $");
|
|
|
|
#include "opt_mvsata.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/buf.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/cpu.h>
|
|
#include <sys/device.h>
|
|
#include <sys/disklabel.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/proc.h>
|
|
|
|
#include <machine/vmparam.h>
|
|
|
|
#include <dev/ata/atareg.h>
|
|
#include <dev/ata/atavar.h>
|
|
#include <dev/ic/wdcvar.h>
|
|
#include <dev/ata/satafisvar.h>
|
|
#include <dev/ata/satafisreg.h>
|
|
#include <dev/ata/satapmpreg.h>
|
|
#include <dev/ata/satareg.h>
|
|
#include <dev/ata/satavar.h>
|
|
|
|
#include <dev/scsipi/scsi_all.h> /* for SCSI status */
|
|
|
|
#include "atapibus.h"
|
|
|
|
#include <dev/pci/pcidevs.h> /* XXX should not be here */
|
|
|
|
#include <dev/ic/mvsatareg.h>
|
|
#include <dev/ic/mvsatavar.h>
|
|
|
|
#define MVSATA_DEV(sc) ((sc)->sc_wdcdev.sc_atac.atac_dev)
|
|
#define MVSATA_DEV2(mvport) ((mvport)->port_ata_channel.ch_atac->atac_dev)
|
|
|
|
#define MVSATA_HC_READ_4(hc, reg) \
|
|
bus_space_read_4((hc)->hc_iot, (hc)->hc_ioh, (reg))
|
|
#define MVSATA_HC_WRITE_4(hc, reg, val) \
|
|
bus_space_write_4((hc)->hc_iot, (hc)->hc_ioh, (reg), (val))
|
|
#define MVSATA_EDMA_READ_4(mvport, reg) \
|
|
bus_space_read_4((mvport)->port_iot, (mvport)->port_ioh, (reg))
|
|
#define MVSATA_EDMA_WRITE_4(mvport, reg, val) \
|
|
bus_space_write_4((mvport)->port_iot, (mvport)->port_ioh, (reg), (val))
|
|
#define MVSATA_WDC_READ_2(mvport, reg) \
|
|
bus_space_read_2((mvport)->port_iot, (mvport)->port_ioh, \
|
|
SHADOW_REG_BLOCK_OFFSET + (reg))
|
|
#define MVSATA_WDC_READ_1(mvport, reg) \
|
|
bus_space_read_1((mvport)->port_iot, (mvport)->port_ioh, \
|
|
SHADOW_REG_BLOCK_OFFSET + (reg))
|
|
#define MVSATA_WDC_WRITE_2(mvport, reg, val) \
|
|
bus_space_write_2((mvport)->port_iot, (mvport)->port_ioh, \
|
|
SHADOW_REG_BLOCK_OFFSET + (reg), (val))
|
|
#define MVSATA_WDC_WRITE_1(mvport, reg, val) \
|
|
bus_space_write_1((mvport)->port_iot, (mvport)->port_ioh, \
|
|
SHADOW_REG_BLOCK_OFFSET + (reg), (val))
|
|
|
|
#ifdef MVSATA_DEBUG
|
|
|
|
#define DEBUG_INTR 0x01
|
|
#define DEBUG_XFERS 0x02
|
|
#define DEBUG_FUNCS 0x08
|
|
#define DEBUG_PROBE 0x10
|
|
|
|
#define DPRINTF(n,x) if (mvsata_debug & (n)) printf x
|
|
int mvsata_debug = 0;
|
|
#else
|
|
#define DPRINTF(n,x)
|
|
#endif
|
|
|
|
#define ATA_DELAY 10000 /* 10s for a drive I/O */
|
|
#define ATAPI_DELAY 10 /* 10 ms, this is used only before
|
|
sending a cmd */
|
|
#define ATAPI_MODE_DELAY 1000 /* 1s, timeout for SET_FEATURE cmds */
|
|
|
|
#define MVSATA_EPRD_MAX_SIZE (sizeof(struct eprd) * (MAXPHYS / PAGE_SIZE))
|
|
|
|
|
|
static void mvsata_probe_drive(struct ata_channel *);
|
|
static void mvsata_reset_channel(struct ata_channel *, int);
|
|
|
|
#ifndef MVSATA_WITHOUTDMA
|
|
static int mvsata_bio(struct ata_drive_datas *, struct ata_xfer *);
|
|
static void mvsata_reset_drive(struct ata_drive_datas *, int, uint32_t *);
|
|
static int mvsata_exec_command(struct ata_drive_datas *, struct ata_xfer *);
|
|
static int mvsata_addref(struct ata_drive_datas *);
|
|
static void mvsata_delref(struct ata_drive_datas *);
|
|
static void mvsata_killpending(struct ata_drive_datas *);
|
|
|
|
#if NATAPIBUS > 0
|
|
static void mvsata_atapibus_attach(struct atabus_softc *);
|
|
static void mvsata_atapi_scsipi_request(struct scsipi_channel *,
|
|
scsipi_adapter_req_t, void *);
|
|
static void mvsata_atapi_minphys(struct buf *);
|
|
static void mvsata_atapi_probe_device(struct atapibus_softc *, int);
|
|
static void mvsata_atapi_kill_pending(struct scsipi_periph *);
|
|
#endif
|
|
#endif
|
|
|
|
static void mvsata_setup_channel(struct ata_channel *);
|
|
|
|
#ifndef MVSATA_WITHOUTDMA
|
|
static int mvsata_bio_start(struct ata_channel *, struct ata_xfer *);
|
|
static int mvsata_bio_intr(struct ata_channel *, struct ata_xfer *, int);
|
|
static void mvsata_bio_poll(struct ata_channel *, struct ata_xfer *);
|
|
static void mvsata_bio_kill_xfer(struct ata_channel *, struct ata_xfer *, int);
|
|
static void mvsata_bio_done(struct ata_channel *, struct ata_xfer *);
|
|
static int mvsata_bio_ready(struct mvsata_port *, struct ata_bio *, int,
|
|
int);
|
|
static int mvsata_wdc_cmd_start(struct ata_channel *, struct ata_xfer *);
|
|
static int mvsata_wdc_cmd_intr(struct ata_channel *, struct ata_xfer *, int);
|
|
static void mvsata_wdc_cmd_poll(struct ata_channel *, struct ata_xfer *);
|
|
static void mvsata_wdc_cmd_kill_xfer(struct ata_channel *, struct ata_xfer *,
|
|
int);
|
|
static void mvsata_wdc_cmd_done(struct ata_channel *, struct ata_xfer *);
|
|
static void mvsata_wdc_cmd_done_end(struct ata_channel *, struct ata_xfer *);
|
|
#if NATAPIBUS > 0
|
|
static int mvsata_atapi_start(struct ata_channel *, struct ata_xfer *);
|
|
static int mvsata_atapi_intr(struct ata_channel *, struct ata_xfer *, int);
|
|
static void mvsata_atapi_poll(struct ata_channel *, struct ata_xfer *);
|
|
static void mvsata_atapi_kill_xfer(struct ata_channel *, struct ata_xfer *,
|
|
int);
|
|
static void mvsata_atapi_reset(struct ata_channel *, struct ata_xfer *);
|
|
static void mvsata_atapi_phase_complete(struct ata_xfer *);
|
|
static void mvsata_atapi_done(struct ata_channel *, struct ata_xfer *);
|
|
static void mvsata_atapi_polldsc(void *);
|
|
#endif
|
|
|
|
static int mvsata_edma_enqueue(struct mvsata_port *, struct ata_xfer *);
|
|
static int mvsata_edma_handle(struct mvsata_port *, struct ata_xfer *);
|
|
static int mvsata_edma_wait(struct mvsata_port *, struct ata_xfer *, int);
|
|
static void mvsata_edma_timeout(void *);
|
|
static void mvsata_edma_rqq_remove(struct mvsata_port *, struct ata_xfer *);
|
|
#if NATAPIBUS > 0
|
|
static int mvsata_bdma_init(struct mvsata_port *, struct ata_xfer *);
|
|
static void mvsata_bdma_start(struct mvsata_port *);
|
|
#endif
|
|
#endif
|
|
|
|
static int mvsata_nondma_handle(struct mvsata_port *);
|
|
static void mvsata_channel_recover(struct mvsata_port *);
|
|
|
|
static int mvsata_port_init(struct mvsata_hc *, int);
|
|
static int mvsata_wdc_reg_init(struct mvsata_port *, struct wdc_regs *);
|
|
#ifndef MVSATA_WITHOUTDMA
|
|
static inline void mvsata_quetag_get(struct mvsata_port *, uint8_t);
|
|
static inline void mvsata_quetag_put(struct mvsata_port *, uint8_t);
|
|
static void *mvsata_edma_resource_prepare(struct mvsata_port *, bus_dma_tag_t,
|
|
bus_dmamap_t *, size_t, int);
|
|
static void mvsata_edma_resource_purge(struct mvsata_port *, bus_dma_tag_t,
|
|
bus_dmamap_t, void *);
|
|
static int mvsata_dma_bufload(struct mvsata_port *, int, void *, size_t, int);
|
|
static inline void mvsata_dma_bufunload(struct mvsata_port *, int, int);
|
|
#endif
|
|
|
|
static void mvsata_hreset_port(struct mvsata_port *);
|
|
static void mvsata_reset_port(struct mvsata_port *);
|
|
static void mvsata_reset_hc(struct mvsata_hc *);
|
|
static uint32_t mvsata_softreset(struct mvsata_port *, int);
|
|
#ifndef MVSATA_WITHOUTDMA
|
|
static void mvsata_edma_reset_qptr(struct mvsata_port *);
|
|
static inline void mvsata_edma_enable(struct mvsata_port *);
|
|
static int mvsata_edma_disable(struct mvsata_port *, int, int);
|
|
static void mvsata_edma_config(struct mvsata_port *, enum mvsata_edmamode);
|
|
|
|
static void mvsata_edma_setup_crqb(struct mvsata_port *, int,
|
|
struct ata_xfer *);
|
|
#endif
|
|
static uint32_t mvsata_read_preamps_gen1(struct mvsata_port *);
|
|
static void mvsata_fix_phy_gen1(struct mvsata_port *);
|
|
static void mvsata_devconn_gen1(struct mvsata_port *);
|
|
|
|
static uint32_t mvsata_read_preamps_gen2(struct mvsata_port *);
|
|
static void mvsata_fix_phy_gen2(struct mvsata_port *);
|
|
#ifndef MVSATA_WITHOUTDMA
|
|
static void mvsata_edma_setup_crqb_gen2e(struct mvsata_port *, int,
|
|
struct ata_xfer *);
|
|
|
|
#ifdef MVSATA_DEBUG
|
|
static void mvsata_print_crqb(struct mvsata_port *, int);
|
|
static void mvsata_print_crpb(struct mvsata_port *, int);
|
|
static void mvsata_print_eprd(struct mvsata_port *, int);
|
|
#endif
|
|
|
|
static const struct ata_bustype mvsata_ata_bustype = {
|
|
SCSIPI_BUSTYPE_ATA,
|
|
mvsata_bio,
|
|
mvsata_reset_drive,
|
|
mvsata_reset_channel,
|
|
mvsata_exec_command,
|
|
ata_get_params,
|
|
mvsata_addref,
|
|
mvsata_delref,
|
|
mvsata_killpending
|
|
};
|
|
|
|
#if NATAPIBUS > 0
|
|
static const struct scsipi_bustype mvsata_atapi_bustype = {
|
|
SCSIPI_BUSTYPE_ATAPI,
|
|
atapi_scsipi_cmd,
|
|
atapi_interpret_sense,
|
|
atapi_print_addr,
|
|
mvsata_atapi_kill_pending,
|
|
NULL,
|
|
};
|
|
#endif /* NATAPIBUS */
|
|
#endif
|
|
|
|
static void
|
|
mvsata_pmp_select(struct mvsata_port *mvport, int pmpport)
|
|
{
|
|
uint32_t ifctl;
|
|
|
|
KASSERT(pmpport < PMP_MAX_DRIVES);
|
|
#if defined(DIAGNOSTIC) || defined(MVSATA_DEBUG)
|
|
if ((MVSATA_EDMA_READ_4(mvport, EDMA_CMD) & EDMA_CMD_EENEDMA) != 0) {
|
|
panic("EDMA enabled");
|
|
}
|
|
#endif
|
|
|
|
ifctl = MVSATA_EDMA_READ_4(mvport, SATA_SATAICTL);
|
|
ifctl &= ~0xf;
|
|
ifctl |= pmpport;
|
|
MVSATA_EDMA_WRITE_4(mvport, SATA_SATAICTL, ifctl);
|
|
}
|
|
|
|
int
|
|
mvsata_attach(struct mvsata_softc *sc, struct mvsata_product *product,
|
|
int (*mvsata_sreset)(struct mvsata_softc *),
|
|
int (*mvsata_misc_reset)(struct mvsata_softc *),
|
|
int read_pre_amps)
|
|
{
|
|
struct mvsata_hc *mvhc;
|
|
struct mvsata_port *mvport;
|
|
uint32_t (*read_preamps)(struct mvsata_port *) = NULL;
|
|
void (*_fix_phy)(struct mvsata_port *) = NULL;
|
|
#ifndef MVSATA_WITHOUTDMA
|
|
void (*edma_setup_crqb)
|
|
(struct mvsata_port *, int, struct ata_xfer *) = NULL;
|
|
#endif
|
|
int hc, port, channel;
|
|
|
|
aprint_normal_dev(MVSATA_DEV(sc), "Gen%s, %dhc, %dport/hc\n",
|
|
(product->generation == gen1) ? "I" :
|
|
((product->generation == gen2) ? "II" : "IIe"),
|
|
product->hc, product->port);
|
|
|
|
|
|
switch (product->generation) {
|
|
case gen1:
|
|
mvsata_sreset = NULL;
|
|
read_pre_amps = 1; /* MUST */
|
|
read_preamps = mvsata_read_preamps_gen1;
|
|
_fix_phy = mvsata_fix_phy_gen1;
|
|
#ifndef MVSATA_WITHOUTDMA
|
|
edma_setup_crqb = mvsata_edma_setup_crqb;
|
|
#endif
|
|
break;
|
|
|
|
case gen2:
|
|
read_preamps = mvsata_read_preamps_gen2;
|
|
_fix_phy = mvsata_fix_phy_gen2;
|
|
#ifndef MVSATA_WITHOUTDMA
|
|
edma_setup_crqb = mvsata_edma_setup_crqb;
|
|
#endif
|
|
break;
|
|
|
|
case gen2e:
|
|
read_preamps = mvsata_read_preamps_gen2;
|
|
_fix_phy = mvsata_fix_phy_gen2;
|
|
#ifndef MVSATA_WITHOUTDMA
|
|
edma_setup_crqb = mvsata_edma_setup_crqb_gen2e;
|
|
sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_NCQ;
|
|
#endif
|
|
break;
|
|
}
|
|
|
|
sc->sc_gen = product->generation;
|
|
sc->sc_hc = product->hc;
|
|
sc->sc_port = product->port;
|
|
sc->sc_flags = product->flags;
|
|
|
|
#ifdef MVSATA_WITHOUTDMA
|
|
sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DATA16;
|
|
#else
|
|
sc->sc_edma_setup_crqb = edma_setup_crqb;
|
|
sc->sc_wdcdev.sc_atac.atac_cap |=
|
|
(ATAC_CAP_DATA16 | ATAC_CAP_DMA | ATAC_CAP_UDMA);
|
|
#endif
|
|
sc->sc_wdcdev.sc_atac.atac_pio_cap = 4;
|
|
#ifdef MVSATA_WITHOUTDMA
|
|
sc->sc_wdcdev.sc_atac.atac_dma_cap = 0;
|
|
sc->sc_wdcdev.sc_atac.atac_udma_cap = 0;
|
|
#else
|
|
sc->sc_wdcdev.sc_atac.atac_dma_cap = 2;
|
|
sc->sc_wdcdev.sc_atac.atac_udma_cap = 6;
|
|
#endif
|
|
sc->sc_wdcdev.sc_atac.atac_channels = sc->sc_ata_channels;
|
|
sc->sc_wdcdev.sc_atac.atac_nchannels = sc->sc_hc * sc->sc_port;
|
|
#ifndef MVSATA_WITHOUTDMA
|
|
sc->sc_wdcdev.sc_atac.atac_bustype_ata = &mvsata_ata_bustype;
|
|
#if NATAPIBUS > 0
|
|
sc->sc_wdcdev.sc_atac.atac_atapibus_attach = mvsata_atapibus_attach;
|
|
#endif
|
|
#endif
|
|
sc->sc_wdcdev.wdc_maxdrives = 1; /* SATA is always 1 drive */
|
|
sc->sc_wdcdev.sc_atac.atac_probe = mvsata_probe_drive;
|
|
sc->sc_wdcdev.sc_atac.atac_set_modes = mvsata_setup_channel;
|
|
|
|
sc->sc_wdc_regs =
|
|
malloc(sizeof(struct wdc_regs) * product->hc * product->port,
|
|
M_DEVBUF, M_NOWAIT);
|
|
if (sc->sc_wdc_regs == NULL) {
|
|
aprint_error_dev(MVSATA_DEV(sc),
|
|
"can't allocate wdc regs memory\n");
|
|
return ENOMEM;
|
|
}
|
|
sc->sc_wdcdev.regs = sc->sc_wdc_regs;
|
|
|
|
for (hc = 0; hc < sc->sc_hc; hc++) {
|
|
mvhc = &sc->sc_hcs[hc];
|
|
mvhc->hc = hc;
|
|
mvhc->hc_sc = sc;
|
|
mvhc->hc_iot = sc->sc_iot;
|
|
if (bus_space_subregion(sc->sc_iot, sc->sc_ioh,
|
|
hc * SATAHC_REGISTER_SIZE, SATAHC_REGISTER_SIZE,
|
|
&mvhc->hc_ioh)) {
|
|
aprint_error_dev(MVSATA_DEV(sc),
|
|
"can't subregion SATAHC %d registers\n", hc);
|
|
continue;
|
|
}
|
|
|
|
for (port = 0; port < sc->sc_port; port++)
|
|
if (mvsata_port_init(mvhc, port) == 0) {
|
|
int pre_amps;
|
|
|
|
mvport = mvhc->hc_ports[port];
|
|
pre_amps = read_pre_amps ?
|
|
read_preamps(mvport) : 0x00000720;
|
|
mvport->_fix_phy_param.pre_amps = pre_amps;
|
|
mvport->_fix_phy_param._fix_phy = _fix_phy;
|
|
|
|
if (!mvsata_sreset)
|
|
mvsata_reset_port(mvport);
|
|
}
|
|
|
|
if (!mvsata_sreset)
|
|
mvsata_reset_hc(mvhc);
|
|
}
|
|
if (mvsata_sreset)
|
|
mvsata_sreset(sc);
|
|
|
|
if (mvsata_misc_reset)
|
|
mvsata_misc_reset(sc);
|
|
|
|
for (hc = 0; hc < sc->sc_hc; hc++)
|
|
for (port = 0; port < sc->sc_port; port++) {
|
|
mvport = sc->sc_hcs[hc].hc_ports[port];
|
|
if (mvport == NULL)
|
|
continue;
|
|
if (mvsata_sreset)
|
|
mvport->_fix_phy_param._fix_phy(mvport);
|
|
}
|
|
for (channel = 0; channel < sc->sc_hc * sc->sc_port; channel++)
|
|
wdcattach(sc->sc_ata_channels[channel]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
mvsata_intr(struct mvsata_hc *mvhc)
|
|
{
|
|
struct mvsata_softc *sc = mvhc->hc_sc;
|
|
struct mvsata_port *mvport;
|
|
uint32_t cause;
|
|
int port, handled = 0;
|
|
|
|
cause = MVSATA_HC_READ_4(mvhc, SATAHC_IC);
|
|
|
|
DPRINTF(DEBUG_INTR, ("%s:%d: mvsata_intr: cause=0x%08x\n",
|
|
device_xname(MVSATA_DEV(sc)), mvhc->hc, cause));
|
|
|
|
if (cause & SATAHC_IC_SAINTCOAL)
|
|
MVSATA_HC_WRITE_4(mvhc, SATAHC_IC, ~SATAHC_IC_SAINTCOAL);
|
|
cause &= ~SATAHC_IC_SAINTCOAL;
|
|
|
|
for (port = 0; port < sc->sc_port; port++) {
|
|
mvport = mvhc->hc_ports[port];
|
|
|
|
if (cause & SATAHC_IC_DONE(port)) {
|
|
#ifndef MVSATA_WITHOUTDMA
|
|
handled = mvsata_edma_handle(mvport, NULL);
|
|
#endif
|
|
MVSATA_HC_WRITE_4(mvhc, SATAHC_IC,
|
|
~SATAHC_IC_DONE(port));
|
|
}
|
|
|
|
if (cause & SATAHC_IC_SADEVINTERRUPT(port)) {
|
|
(void) mvsata_nondma_handle(mvport);
|
|
MVSATA_HC_WRITE_4(mvhc, SATAHC_IC,
|
|
~SATAHC_IC_SADEVINTERRUPT(port));
|
|
handled = 1;
|
|
}
|
|
}
|
|
|
|
return handled;
|
|
}
|
|
|
|
static int
|
|
mvsata_nondma_handle(struct mvsata_port *mvport)
|
|
{
|
|
struct ata_channel *chp = &mvport->port_ata_channel;
|
|
struct ata_xfer *xfer;
|
|
int ret;
|
|
|
|
/*
|
|
* The chip doesn't support several pending non-DMA commands,
|
|
* and the ata middle layer never issues several non-NCQ commands,
|
|
* so there must be exactly one active command at this moment.
|
|
*/
|
|
xfer = ata_queue_get_active_xfer(chp);
|
|
if (xfer == NULL) {
|
|
/* Can happen after error recovery, ignore */
|
|
DPRINTF(DEBUG_FUNCS|DEBUG_XFERS,
|
|
("%s:%d: %s: intr without xfer\n",
|
|
device_xname(MVSATA_DEV2(mvport)), chp->ch_channel,
|
|
__func__));
|
|
return 0;
|
|
}
|
|
|
|
ret = xfer->c_intr(chp, xfer, 1);
|
|
return (ret);
|
|
}
|
|
|
|
int
|
|
mvsata_error(struct mvsata_port *mvport)
|
|
{
|
|
struct mvsata_softc *sc = device_private(MVSATA_DEV2(mvport));
|
|
uint32_t cause;
|
|
|
|
cause = MVSATA_EDMA_READ_4(mvport, EDMA_IEC);
|
|
/*
|
|
* We must ack SATA_SE and SATA_FISIC before acking coresponding bits
|
|
* in EDMA_IEC.
|
|
*/
|
|
if (cause & EDMA_IE_SERRINT) {
|
|
MVSATA_EDMA_WRITE_4(mvport, SATA_SE,
|
|
MVSATA_EDMA_READ_4(mvport, SATA_SEIM));
|
|
}
|
|
if (cause & EDMA_IE_ETRANSINT) {
|
|
MVSATA_EDMA_WRITE_4(mvport, SATA_FISIC,
|
|
~MVSATA_EDMA_READ_4(mvport, SATA_FISIM));
|
|
}
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_IEC, ~cause);
|
|
|
|
DPRINTF(DEBUG_INTR, ("%s:%d:%d:"
|
|
" mvsata_error: cause=0x%08x, mask=0x%08x, status=0x%08x\n",
|
|
device_xname(MVSATA_DEV2(mvport)), mvport->port_hc->hc,
|
|
mvport->port, cause, MVSATA_EDMA_READ_4(mvport, EDMA_IEM),
|
|
MVSATA_EDMA_READ_4(mvport, EDMA_S)));
|
|
|
|
cause &= MVSATA_EDMA_READ_4(mvport, EDMA_IEM);
|
|
if (!cause)
|
|
return 0;
|
|
|
|
if (cause & EDMA_IE_EDEVDIS) {
|
|
aprint_normal("%s:%d:%d: device disconnect\n",
|
|
device_xname(MVSATA_DEV2(mvport)),
|
|
mvport->port_hc->hc, mvport->port);
|
|
}
|
|
if (cause & EDMA_IE_EDEVCON) {
|
|
if (sc->sc_gen == gen1)
|
|
mvsata_devconn_gen1(mvport);
|
|
|
|
DPRINTF(DEBUG_INTR, (" device connected\n"));
|
|
}
|
|
|
|
#ifndef MVSATA_WITHOUTDMA
|
|
if ((sc->sc_gen == gen1 && cause & EDMA_IE_ETRANSINT) ||
|
|
(sc->sc_gen != gen1 && cause & EDMA_IE_ESELFDIS)) {
|
|
switch (mvport->port_edmamode_curr) {
|
|
case dma:
|
|
case queued:
|
|
case ncq:
|
|
mvsata_edma_reset_qptr(mvport);
|
|
mvsata_edma_enable(mvport);
|
|
if (cause & EDMA_IE_EDEVERR)
|
|
break;
|
|
|
|
/* FALLTHROUGH */
|
|
|
|
case nodma:
|
|
default:
|
|
aprint_error(
|
|
"%s:%d:%d: EDMA self disable happen 0x%x\n",
|
|
device_xname(MVSATA_DEV2(mvport)),
|
|
mvport->port_hc->hc, mvport->port, cause);
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
if (cause & EDMA_IE_ETRANSINT) {
|
|
/* hot plug the Port Multiplier */
|
|
aprint_normal("%s:%d:%d: detect Port Multiplier?\n",
|
|
device_xname(MVSATA_DEV2(mvport)),
|
|
mvport->port_hc->hc, mvport->port);
|
|
}
|
|
if (cause & EDMA_IE_EDEVERR) {
|
|
aprint_error("%s:%d:%d: device error, recovering\n",
|
|
device_xname(MVSATA_DEV2(mvport)),
|
|
mvport->port_hc->hc, mvport->port);
|
|
|
|
if (!mvport->port_recovering)
|
|
mvsata_channel_recover(mvport);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void
|
|
mvsata_hold(struct mvsata_port *mvport)
|
|
{
|
|
mvport->port_hold_slots |= mvport->port_quetagidx;
|
|
mvport->port_quetagidx = 0;
|
|
}
|
|
|
|
static void
|
|
mvsata_unhold(struct mvsata_port *mvport)
|
|
{
|
|
mvport->port_quetagidx = mvport->port_hold_slots;
|
|
mvport->port_hold_slots = 0;
|
|
}
|
|
|
|
static void
|
|
mvsata_channel_recover(struct mvsata_port *mvport)
|
|
{
|
|
struct ata_channel *chp = &mvport->port_ata_channel;
|
|
struct ata_drive_datas *drvp;
|
|
int drive, error;
|
|
uint8_t eslot, slot, st, err;
|
|
struct ata_xfer *xfer;
|
|
|
|
KASSERT(!mvport->port_recovering);
|
|
|
|
mvport->port_recovering = true;
|
|
|
|
if (chp->ch_ndrives > PMP_PORT_CTL) {
|
|
/* Get PM port number for the device in error. This device
|
|
* doesn't seem to have dedicated register for this, so just
|
|
* assume last selected port was the one. */
|
|
/* XXX FIS-based switching */
|
|
drive = MVSATA_EDMA_READ_4(mvport, SATA_SATAICTL) & 0xf;
|
|
} else
|
|
drive = 0;
|
|
|
|
drvp = &chp->ch_drive[drive];
|
|
|
|
/*
|
|
* Controller doesn't need any special action. Simply execute
|
|
* READ LOG EXT for NCQ to unblock device processing, then continue
|
|
* as if nothing happened.
|
|
*/
|
|
KASSERT(drive >= 0);
|
|
|
|
mvsata_hold(mvport);
|
|
|
|
/*
|
|
* When running NCQ commands, READ LOG EXT is necessary to clear the
|
|
* error condition and unblock the device.
|
|
*/
|
|
error = ata_read_log_ext_ncq(drvp, AT_POLL, &eslot, &st, &err);
|
|
|
|
mvsata_unhold(mvport);
|
|
|
|
switch (error) {
|
|
case 0:
|
|
/* Error out the particular NCQ xfer, then requeue the others */
|
|
if ((mvport->port_quetagidx & (1 << eslot)) != 0) {
|
|
xfer = ata_queue_hwslot_to_xfer(chp, eslot);
|
|
xfer->c_flags |= C_RECOVERED;
|
|
xfer->c_bio.error = ERROR;
|
|
xfer->c_bio.r_error = err;
|
|
xfer->c_intr(chp, xfer, 1);
|
|
}
|
|
break;
|
|
|
|
case EOPNOTSUPP:
|
|
/*
|
|
* Non-NCQ command error, just find the slot and end it with
|
|
* an error. Handler figures the error itself.
|
|
*/
|
|
for (slot = 0; slot < MVSATA_EDMAQ_LEN; slot++) {
|
|
if ((mvport->port_quetagidx & (1 << slot)) != 0) {
|
|
xfer = ata_queue_hwslot_to_xfer(chp, slot);
|
|
if (xfer->c_drive != drive)
|
|
continue;
|
|
|
|
xfer->c_intr(chp, xfer, 1);
|
|
}
|
|
}
|
|
break;
|
|
|
|
case EAGAIN:
|
|
/*
|
|
* Failed to get resources to run the recovery command, must
|
|
* reset the drive. This will also kill all still outstanding
|
|
* transfers.
|
|
*/
|
|
mvsata_reset_channel(chp, AT_POLL);
|
|
goto out;
|
|
/* NOTREACHED */
|
|
|
|
default:
|
|
/*
|
|
* The command to get the slot failed. Kill outstanding
|
|
* commands for the same drive only. No need to reset
|
|
* the drive, it's unblocked nevertheless.
|
|
*/
|
|
break;
|
|
}
|
|
|
|
/* Requeue the non-errorred commands */
|
|
for (slot = 0; slot < MVSATA_EDMAQ_LEN; slot++) {
|
|
if (((mvport->port_quetagidx >> slot) & 1) == 0)
|
|
continue;
|
|
|
|
xfer = ata_queue_hwslot_to_xfer(chp, slot);
|
|
if (xfer->c_drive != drive)
|
|
continue;
|
|
|
|
xfer->c_kill_xfer(chp, xfer,
|
|
(error == 0) ? KILL_REQUEUE : KILL_RESET);
|
|
}
|
|
|
|
out:
|
|
/* Drive unblocked, back to normal operation */
|
|
mvport->port_recovering = false;
|
|
atastart(chp);
|
|
}
|
|
|
|
/*
|
|
* ATA callback entry points
|
|
*/
|
|
|
|
static void
|
|
mvsata_probe_drive(struct ata_channel *chp)
|
|
{
|
|
struct mvsata_port * const mvport = (struct mvsata_port *)chp;
|
|
uint32_t sstat, sig;
|
|
|
|
ata_channel_lock(chp);
|
|
|
|
sstat = sata_reset_interface(chp, mvport->port_iot,
|
|
mvport->port_sata_scontrol, mvport->port_sata_sstatus, AT_WAIT);
|
|
switch (sstat) {
|
|
case SStatus_DET_DEV:
|
|
mvsata_pmp_select(mvport, PMP_PORT_CTL);
|
|
sig = mvsata_softreset(mvport, AT_WAIT);
|
|
sata_interpret_sig(chp, 0, sig);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
ata_channel_unlock(chp);
|
|
}
|
|
|
|
#ifndef MVSATA_WITHOUTDMA
|
|
static void
|
|
mvsata_reset_drive(struct ata_drive_datas *drvp, int flags, uint32_t *sigp)
|
|
{
|
|
struct ata_channel *chp = drvp->chnl_softc;
|
|
struct mvsata_port *mvport = (struct mvsata_port *)chp;
|
|
uint32_t edma_c;
|
|
uint32_t sig;
|
|
|
|
ata_channel_lock(chp);
|
|
|
|
edma_c = MVSATA_EDMA_READ_4(mvport, EDMA_CMD);
|
|
|
|
DPRINTF(DEBUG_FUNCS,
|
|
("%s:%d: mvsata_reset_drive: drive=%d (EDMA %sactive)\n",
|
|
device_xname(MVSATA_DEV2(mvport)), chp->ch_channel, drvp->drive,
|
|
(edma_c & EDMA_CMD_EENEDMA) ? "" : "not "));
|
|
|
|
if (edma_c & EDMA_CMD_EENEDMA)
|
|
mvsata_edma_disable(mvport, 10000, flags);
|
|
|
|
mvsata_pmp_select(mvport, drvp->drive);
|
|
|
|
sig = mvsata_softreset(mvport, flags);
|
|
|
|
if (sigp)
|
|
*sigp = sig;
|
|
|
|
if (edma_c & EDMA_CMD_EENEDMA) {
|
|
mvsata_edma_reset_qptr(mvport);
|
|
mvsata_edma_enable(mvport);
|
|
}
|
|
|
|
ata_channel_unlock(chp);
|
|
|
|
return;
|
|
}
|
|
#endif /* MVSATA_WITHOUTDMA */
|
|
|
|
static void
|
|
mvsata_reset_channel(struct ata_channel *chp, int flags)
|
|
{
|
|
struct mvsata_port *mvport = (struct mvsata_port *)chp;
|
|
struct mvsata_softc *sc = device_private(MVSATA_DEV2(mvport));
|
|
uint32_t sstat, ctrl;
|
|
|
|
DPRINTF(DEBUG_FUNCS, ("%s: mvsata_reset_channel: channel=%d\n",
|
|
device_xname(MVSATA_DEV2(mvport)), chp->ch_channel));
|
|
|
|
ata_channel_lock(chp);
|
|
|
|
mvsata_hreset_port(mvport);
|
|
sstat = sata_reset_interface(chp, mvport->port_iot,
|
|
mvport->port_sata_scontrol, mvport->port_sata_sstatus, flags);
|
|
|
|
if (flags & AT_WAIT && sstat == SStatus_DET_DEV_NE &&
|
|
sc->sc_gen != gen1) {
|
|
/* Downgrade to GenI */
|
|
const uint32_t val = SControl_IPM_NONE | SControl_SPD_ANY |
|
|
SControl_DET_DISABLE;
|
|
|
|
MVSATA_EDMA_WRITE_4(mvport, mvport->port_sata_scontrol, val);
|
|
|
|
ctrl = MVSATA_EDMA_READ_4(mvport, SATA_SATAICFG);
|
|
ctrl &= ~(1 << 17); /* Disable GenII */
|
|
MVSATA_EDMA_WRITE_4(mvport, SATA_SATAICFG, ctrl);
|
|
|
|
mvsata_hreset_port(mvport);
|
|
sata_reset_interface(chp, mvport->port_iot,
|
|
mvport->port_sata_scontrol, mvport->port_sata_sstatus,
|
|
flags);
|
|
}
|
|
|
|
ata_kill_active(chp, KILL_RESET, flags);
|
|
|
|
#ifndef MVSATA_WITHOUTDMA
|
|
mvsata_edma_config(mvport, mvport->port_edmamode_curr);
|
|
mvsata_edma_reset_qptr(mvport);
|
|
mvsata_edma_enable(mvport);
|
|
#endif
|
|
|
|
ata_channel_unlock(chp);
|
|
|
|
return;
|
|
}
|
|
|
|
#ifndef MVSATA_WITHOUTDMA
|
|
static int
|
|
mvsata_addref(struct ata_drive_datas *drvp)
|
|
{
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
mvsata_delref(struct ata_drive_datas *drvp)
|
|
{
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
mvsata_killpending(struct ata_drive_datas *drvp)
|
|
{
|
|
|
|
return;
|
|
}
|
|
|
|
#if NATAPIBUS > 0
|
|
static void
|
|
mvsata_atapibus_attach(struct atabus_softc *ata_sc)
|
|
{
|
|
struct ata_channel *chp = ata_sc->sc_chan;
|
|
struct atac_softc *atac = chp->ch_atac;
|
|
struct scsipi_adapter *adapt = &atac->atac_atapi_adapter._generic;
|
|
struct scsipi_channel *chan = &chp->ch_atapi_channel;
|
|
|
|
/*
|
|
* Fill in the scsipi_adapter.
|
|
*/
|
|
adapt->adapt_dev = atac->atac_dev;
|
|
adapt->adapt_nchannels = atac->atac_nchannels;
|
|
adapt->adapt_request = mvsata_atapi_scsipi_request;
|
|
adapt->adapt_minphys = mvsata_atapi_minphys;
|
|
atac->atac_atapi_adapter.atapi_probe_device = mvsata_atapi_probe_device;
|
|
|
|
/*
|
|
* Fill in the scsipi_channel.
|
|
*/
|
|
memset(chan, 0, sizeof(*chan));
|
|
chan->chan_adapter = adapt;
|
|
chan->chan_bustype = &mvsata_atapi_bustype;
|
|
chan->chan_channel = chp->ch_channel;
|
|
chan->chan_flags = SCSIPI_CHAN_OPENINGS;
|
|
chan->chan_openings = 1;
|
|
chan->chan_max_periph = 1;
|
|
chan->chan_ntargets = 1;
|
|
chan->chan_nluns = 1;
|
|
|
|
chp->atapibus =
|
|
config_found_ia(ata_sc->sc_dev, "atapi", chan, atapiprint);
|
|
}
|
|
|
|
static void
|
|
mvsata_atapi_minphys(struct buf *bp)
|
|
{
|
|
|
|
if (bp->b_bcount > MAXPHYS)
|
|
bp->b_bcount = MAXPHYS;
|
|
minphys(bp);
|
|
}
|
|
|
|
static void
|
|
mvsata_atapi_probe_device(struct atapibus_softc *sc, int target)
|
|
{
|
|
struct scsipi_channel *chan = sc->sc_channel;
|
|
struct scsipi_periph *periph;
|
|
struct ataparams ids;
|
|
struct ataparams *id = &ids;
|
|
struct mvsata_softc *mvc =
|
|
device_private(chan->chan_adapter->adapt_dev);
|
|
struct atac_softc *atac = &mvc->sc_wdcdev.sc_atac;
|
|
struct ata_channel *chp = atac->atac_channels[chan->chan_channel];
|
|
struct ata_drive_datas *drvp = &chp->ch_drive[target];
|
|
struct scsipibus_attach_args sa;
|
|
char serial_number[21], model[41], firmware_revision[9];
|
|
int s;
|
|
|
|
/* skip if already attached */
|
|
if (scsipi_lookup_periph(chan, target, 0) != NULL)
|
|
return;
|
|
|
|
/* if no ATAPI device detected at attach time, skip */
|
|
if (drvp->drive_type != ATA_DRIVET_ATAPI) {
|
|
DPRINTF(DEBUG_PROBE, ("%s:%d: mvsata_atapi_probe_device:"
|
|
" drive %d not present\n",
|
|
device_xname(atac->atac_dev), chp->ch_channel, target));
|
|
return;
|
|
}
|
|
|
|
/* Some ATAPI devices need a bit more time after software reset. */
|
|
delay(5000);
|
|
if (ata_get_params(drvp, AT_WAIT, id) == 0) {
|
|
#ifdef ATAPI_DEBUG_PROBE
|
|
printf("%s drive %d: cmdsz 0x%x drqtype 0x%x\n",
|
|
device_xname(sc->sc_dev), target,
|
|
id->atap_config & ATAPI_CFG_CMD_MASK,
|
|
id->atap_config & ATAPI_CFG_DRQ_MASK);
|
|
#endif
|
|
periph = scsipi_alloc_periph(M_NOWAIT);
|
|
if (periph == NULL) {
|
|
aprint_error_dev(atac->atac_dev,
|
|
"unable to allocate periph"
|
|
" for channel %d drive %d\n",
|
|
chp->ch_channel, target);
|
|
return;
|
|
}
|
|
periph->periph_dev = NULL;
|
|
periph->periph_channel = chan;
|
|
periph->periph_switch = &atapi_probe_periphsw;
|
|
periph->periph_target = target;
|
|
periph->periph_lun = 0;
|
|
periph->periph_quirks = PQUIRK_ONLYBIG;
|
|
|
|
#ifdef SCSIPI_DEBUG
|
|
if (SCSIPI_DEBUG_TYPE == SCSIPI_BUSTYPE_ATAPI &&
|
|
SCSIPI_DEBUG_TARGET == target)
|
|
periph->periph_dbflags |= SCSIPI_DEBUG_FLAGS;
|
|
#endif
|
|
periph->periph_type = ATAPI_CFG_TYPE(id->atap_config);
|
|
if (id->atap_config & ATAPI_CFG_REMOV)
|
|
periph->periph_flags |= PERIPH_REMOVABLE;
|
|
if (periph->periph_type == T_SEQUENTIAL) {
|
|
s = splbio();
|
|
drvp->drive_flags |= ATA_DRIVE_ATAPIDSCW;
|
|
splx(s);
|
|
}
|
|
|
|
sa.sa_periph = periph;
|
|
sa.sa_inqbuf.type = ATAPI_CFG_TYPE(id->atap_config);
|
|
sa.sa_inqbuf.removable = id->atap_config & ATAPI_CFG_REMOV ?
|
|
T_REMOV : T_FIXED;
|
|
strnvisx(model, sizeof(model), id->atap_model, 40,
|
|
VIS_TRIM|VIS_SAFE|VIS_OCTAL);
|
|
strnvisx(serial_number, sizeof(serial_number), id->atap_serial,
|
|
20, VIS_TRIM|VIS_SAFE|VIS_OCTAL);
|
|
strnvisx(firmware_revision, sizeof(firmware_revision),
|
|
id->atap_revision, 8, VIS_TRIM|VIS_SAFE|VIS_OCTAL);
|
|
sa.sa_inqbuf.vendor = model;
|
|
sa.sa_inqbuf.product = serial_number;
|
|
sa.sa_inqbuf.revision = firmware_revision;
|
|
|
|
/*
|
|
* Determine the operating mode capabilities of the device.
|
|
*/
|
|
if ((id->atap_config & ATAPI_CFG_CMD_MASK) == ATAPI_CFG_CMD_16)
|
|
periph->periph_cap |= PERIPH_CAP_CMD16;
|
|
/* XXX This is gross. */
|
|
periph->periph_cap |= (id->atap_config & ATAPI_CFG_DRQ_MASK);
|
|
|
|
drvp->drv_softc = atapi_probe_device(sc, target, periph, &sa);
|
|
|
|
if (drvp->drv_softc)
|
|
ata_probe_caps(drvp);
|
|
else {
|
|
s = splbio();
|
|
drvp->drive_type = ATA_DRIVET_NONE;
|
|
splx(s);
|
|
}
|
|
} else {
|
|
DPRINTF(DEBUG_PROBE, ("%s:%d: mvsata_atapi_probe_device:"
|
|
" ATAPI_IDENTIFY_DEVICE failed for drive %d: error\n",
|
|
device_xname(atac->atac_dev), chp->ch_channel, target));
|
|
s = splbio();
|
|
drvp->drive_type = ATA_DRIVET_NONE;
|
|
splx(s);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Kill off all pending xfers for a periph.
|
|
*
|
|
* Must be called at splbio().
|
|
*/
|
|
static void
|
|
mvsata_atapi_kill_pending(struct scsipi_periph *periph)
|
|
{
|
|
struct atac_softc *atac =
|
|
device_private(periph->periph_channel->chan_adapter->adapt_dev);
|
|
struct ata_channel *chp =
|
|
atac->atac_channels[periph->periph_channel->chan_channel];
|
|
|
|
ata_kill_pending(&chp->ch_drive[periph->periph_target]);
|
|
}
|
|
#endif /* NATAPIBUS > 0 */
|
|
#endif /* MVSATA_WITHOUTDMA */
|
|
|
|
|
|
/*
|
|
* mvsata_setup_channel()
|
|
* Setup EDMA registers and prepare/purge DMA resources.
|
|
* We assuming already stopped the EDMA.
|
|
*/
|
|
static void
|
|
mvsata_setup_channel(struct ata_channel *chp)
|
|
{
|
|
#if !defined(MVSATA_WITHOUTDMA) || defined(MVSATA_DEBUG)
|
|
struct mvsata_port *mvport = (struct mvsata_port *)chp;
|
|
#endif
|
|
struct ata_drive_datas *drvp;
|
|
uint32_t edma_mode;
|
|
int drive, s;
|
|
#ifndef MVSATA_WITHOUTDMA
|
|
int i;
|
|
const int crqb_size = sizeof(union mvsata_crqb) * MVSATA_EDMAQ_LEN;
|
|
const int crpb_size = sizeof(struct crpb) * MVSATA_EDMAQ_LEN;
|
|
const int eprd_buf_size = MVSATA_EPRD_MAX_SIZE * MVSATA_EDMAQ_LEN;
|
|
#endif
|
|
|
|
DPRINTF(DEBUG_FUNCS, ("%s:%d: mvsata_setup_channel: ",
|
|
device_xname(MVSATA_DEV2(mvport)), chp->ch_channel));
|
|
|
|
edma_mode = nodma;
|
|
for (drive = 0; drive < chp->ch_ndrives; drive++) {
|
|
drvp = &chp->ch_drive[drive];
|
|
|
|
/* If no drive, skip */
|
|
if (drvp->drive_type == ATA_DRIVET_NONE)
|
|
continue;
|
|
|
|
if (drvp->drive_flags & ATA_DRIVE_UDMA) {
|
|
/* use Ultra/DMA */
|
|
s = splbio();
|
|
drvp->drive_flags &= ~ATA_DRIVE_DMA;
|
|
splx(s);
|
|
}
|
|
|
|
if (drvp->drive_flags & (ATA_DRIVE_UDMA | ATA_DRIVE_DMA)) {
|
|
if (drvp->drive_flags & ATA_DRIVE_NCQ)
|
|
edma_mode = ncq;
|
|
else if (drvp->drive_type == ATA_DRIVET_ATA)
|
|
edma_mode = dma;
|
|
}
|
|
}
|
|
|
|
DPRINTF(DEBUG_FUNCS,
|
|
("EDMA %sactive mode\n", (edma_mode == nodma) ? "not " : ""));
|
|
|
|
#ifndef MVSATA_WITHOUTDMA
|
|
if (edma_mode == nodma) {
|
|
no_edma:
|
|
if (mvport->port_crqb != NULL)
|
|
mvsata_edma_resource_purge(mvport, mvport->port_dmat,
|
|
mvport->port_crqb_dmamap, mvport->port_crqb);
|
|
if (mvport->port_crpb != NULL)
|
|
mvsata_edma_resource_purge(mvport, mvport->port_dmat,
|
|
mvport->port_crpb_dmamap, mvport->port_crpb);
|
|
if (mvport->port_eprd != NULL)
|
|
mvsata_edma_resource_purge(mvport, mvport->port_dmat,
|
|
mvport->port_eprd_dmamap, mvport->port_eprd);
|
|
|
|
return;
|
|
}
|
|
|
|
if (mvport->port_crqb == NULL)
|
|
mvport->port_crqb = mvsata_edma_resource_prepare(mvport,
|
|
mvport->port_dmat, &mvport->port_crqb_dmamap, crqb_size, 1);
|
|
if (mvport->port_crpb == NULL)
|
|
mvport->port_crpb = mvsata_edma_resource_prepare(mvport,
|
|
mvport->port_dmat, &mvport->port_crpb_dmamap, crpb_size, 0);
|
|
if (mvport->port_eprd == NULL) {
|
|
mvport->port_eprd = mvsata_edma_resource_prepare(mvport,
|
|
mvport->port_dmat, &mvport->port_eprd_dmamap, eprd_buf_size,
|
|
1);
|
|
for (i = 0; i < MVSATA_EDMAQ_LEN; i++) {
|
|
mvport->port_reqtbl[i].eprd_offset =
|
|
i * MVSATA_EPRD_MAX_SIZE;
|
|
mvport->port_reqtbl[i].eprd = mvport->port_eprd +
|
|
i * MVSATA_EPRD_MAX_SIZE / sizeof(struct eprd);
|
|
}
|
|
}
|
|
|
|
if (mvport->port_crqb == NULL || mvport->port_crpb == NULL ||
|
|
mvport->port_eprd == NULL) {
|
|
aprint_error_dev(MVSATA_DEV2(mvport),
|
|
"channel %d: can't use EDMA\n", chp->ch_channel);
|
|
s = splbio();
|
|
for (drive = 0; drive < chp->ch_ndrives; drive++) {
|
|
drvp = &chp->ch_drive[drive];
|
|
|
|
/* If no drive, skip */
|
|
if (drvp->drive_type == ATA_DRIVET_NONE)
|
|
continue;
|
|
|
|
drvp->drive_flags &= ~(ATA_DRIVE_UDMA | ATA_DRIVE_DMA);
|
|
}
|
|
splx(s);
|
|
goto no_edma;
|
|
}
|
|
|
|
mvsata_edma_config(mvport, edma_mode);
|
|
mvsata_edma_reset_qptr(mvport);
|
|
mvsata_edma_enable(mvport);
|
|
#endif
|
|
}
|
|
|
|
#ifndef MVSATA_WITHOUTDMA
|
|
static int
|
|
mvsata_bio(struct ata_drive_datas *drvp, struct ata_xfer *xfer)
|
|
{
|
|
struct ata_channel *chp = drvp->chnl_softc;
|
|
struct atac_softc *atac = chp->ch_atac;
|
|
struct ata_bio *ata_bio = &xfer->c_bio;
|
|
|
|
DPRINTF(DEBUG_FUNCS|DEBUG_XFERS,
|
|
("%s:%d: mvsata_bio: drive=%d, blkno=%" PRId64
|
|
", bcount=%ld\n", device_xname(atac->atac_dev), chp->ch_channel,
|
|
drvp->drive, ata_bio->blkno, ata_bio->bcount));
|
|
|
|
if (atac->atac_cap & ATAC_CAP_NOIRQ)
|
|
ata_bio->flags |= ATA_POLL;
|
|
if (ata_bio->flags & ATA_POLL)
|
|
xfer->c_flags |= C_POLL;
|
|
if ((drvp->drive_flags & (ATA_DRIVE_DMA | ATA_DRIVE_UDMA)) &&
|
|
(ata_bio->flags & ATA_SINGLE) == 0)
|
|
xfer->c_flags |= C_DMA;
|
|
xfer->c_drive = drvp->drive;
|
|
xfer->c_databuf = ata_bio->databuf;
|
|
xfer->c_bcount = ata_bio->bcount;
|
|
xfer->c_start = mvsata_bio_start;
|
|
xfer->c_intr = mvsata_bio_intr;
|
|
xfer->c_poll = mvsata_bio_poll;
|
|
xfer->c_abort = mvsata_bio_done;
|
|
xfer->c_kill_xfer = mvsata_bio_kill_xfer;
|
|
ata_exec_xfer(chp, xfer);
|
|
return (ata_bio->flags & ATA_ITSDONE) ? ATACMD_COMPLETE : ATACMD_QUEUED;
|
|
}
|
|
|
|
static int
|
|
mvsata_bio_start(struct ata_channel *chp, struct ata_xfer *xfer)
|
|
{
|
|
struct mvsata_port *mvport = (struct mvsata_port *)chp;
|
|
struct mvsata_softc *sc = device_private(MVSATA_DEV2(mvport));
|
|
struct atac_softc *atac = chp->ch_atac;
|
|
struct wdc_softc *wdc = CHAN_TO_WDC(chp);
|
|
struct ata_bio *ata_bio = &xfer->c_bio;
|
|
struct ata_drive_datas *drvp = &chp->ch_drive[xfer->c_drive];
|
|
int wait_flags = (xfer->c_flags & C_POLL) ? AT_POLL : 0;
|
|
u_int16_t cyl;
|
|
u_int8_t head, sect, cmd = 0;
|
|
int nblks, error, tfd;
|
|
|
|
DPRINTF(DEBUG_FUNCS|DEBUG_XFERS, ("%s:%d: mvsata_bio_start: drive=%d\n",
|
|
device_xname(atac->atac_dev), chp->ch_channel, xfer->c_drive));
|
|
|
|
ata_channel_lock_owned(chp);
|
|
|
|
mvsata_quetag_get(mvport, xfer->c_slot);
|
|
|
|
if (xfer->c_flags & C_DMA)
|
|
if (drvp->n_xfers <= NXFER)
|
|
drvp->n_xfers++;
|
|
|
|
/*
|
|
*
|
|
* When starting a multi-sector transfer, or doing single-sector
|
|
* transfers...
|
|
*/
|
|
if (xfer->c_skip == 0 || (ata_bio->flags & ATA_SINGLE) != 0) {
|
|
if (ata_bio->flags & ATA_SINGLE)
|
|
nblks = 1;
|
|
else
|
|
nblks = xfer->c_bcount / drvp->lp->d_secsize;
|
|
/* Check for bad sectors and adjust transfer, if necessary. */
|
|
if ((drvp->lp->d_flags & D_BADSECT) != 0) {
|
|
long blkdiff;
|
|
int i;
|
|
|
|
for (i = 0; (blkdiff = drvp->badsect[i]) != -1;
|
|
i++) {
|
|
blkdiff -= ata_bio->blkno;
|
|
if (blkdiff < 0)
|
|
continue;
|
|
if (blkdiff == 0)
|
|
/* Replace current block of transfer. */
|
|
ata_bio->blkno =
|
|
drvp->lp->d_secperunit -
|
|
drvp->lp->d_nsectors - i - 1;
|
|
if (blkdiff < nblks) {
|
|
/* Bad block inside transfer. */
|
|
ata_bio->flags |= ATA_SINGLE;
|
|
nblks = 1;
|
|
}
|
|
break;
|
|
}
|
|
/* Transfer is okay now. */
|
|
}
|
|
if (xfer->c_flags & C_DMA) {
|
|
enum mvsata_edmamode dmamode;
|
|
|
|
ata_bio->nblks = nblks;
|
|
ata_bio->nbytes = xfer->c_bcount;
|
|
|
|
/* switch to appropriate dma mode if necessary */
|
|
dmamode = (xfer->c_flags & C_NCQ) ? ncq : dma;
|
|
if (mvport->port_edmamode_curr != dmamode)
|
|
mvsata_edma_config(mvport, dmamode);
|
|
|
|
if (xfer->c_flags & C_POLL)
|
|
sc->sc_enable_intr(mvport, 0 /*off*/);
|
|
error = mvsata_edma_enqueue(mvport, xfer);
|
|
if (error) {
|
|
if (error == EINVAL) {
|
|
/*
|
|
* We can't do DMA on this transfer
|
|
* for some reason. Fall back to
|
|
* PIO.
|
|
*/
|
|
xfer->c_flags &= ~C_DMA;
|
|
error = 0;
|
|
goto do_pio;
|
|
}
|
|
if (error == EBUSY) {
|
|
aprint_error_dev(atac->atac_dev,
|
|
"channel %d: EDMA Queue full\n",
|
|
chp->ch_channel);
|
|
/*
|
|
* XXX: Perhaps, after it waits for
|
|
* a while, it is necessary to call
|
|
* bio_start again.
|
|
*/
|
|
}
|
|
ata_bio->error = ERR_DMA;
|
|
ata_bio->r_error = 0;
|
|
return ATASTART_ABORT;
|
|
}
|
|
chp->ch_flags |= ATACH_DMA_WAIT;
|
|
/* start timeout machinery */
|
|
if ((xfer->c_flags & C_POLL) == 0)
|
|
callout_reset(&xfer->c_timo_callout,
|
|
mstohz(ATA_DELAY),
|
|
mvsata_edma_timeout, xfer);
|
|
/* wait for irq */
|
|
goto intr;
|
|
} /* else not DMA */
|
|
do_pio:
|
|
if (ata_bio->flags & ATA_LBA48) {
|
|
sect = 0;
|
|
cyl = 0;
|
|
head = 0;
|
|
} else if (ata_bio->flags & ATA_LBA) {
|
|
sect = (ata_bio->blkno >> 0) & 0xff;
|
|
cyl = (ata_bio->blkno >> 8) & 0xffff;
|
|
head = (ata_bio->blkno >> 24) & 0x0f;
|
|
head |= WDSD_LBA;
|
|
} else {
|
|
int blkno = ata_bio->blkno;
|
|
sect = blkno % drvp->lp->d_nsectors;
|
|
sect++; /* Sectors begin with 1, not 0. */
|
|
blkno /= drvp->lp->d_nsectors;
|
|
head = blkno % drvp->lp->d_ntracks;
|
|
blkno /= drvp->lp->d_ntracks;
|
|
cyl = blkno;
|
|
head |= WDSD_CHS;
|
|
}
|
|
ata_bio->nblks = min(nblks, drvp->multi);
|
|
ata_bio->nbytes = ata_bio->nblks * drvp->lp->d_secsize;
|
|
KASSERT(nblks == 1 || (ata_bio->flags & ATA_SINGLE) == 0);
|
|
if (ata_bio->nblks > 1)
|
|
cmd = (ata_bio->flags & ATA_READ) ?
|
|
WDCC_READMULTI : WDCC_WRITEMULTI;
|
|
else
|
|
cmd = (ata_bio->flags & ATA_READ) ?
|
|
WDCC_READ : WDCC_WRITE;
|
|
|
|
/* EDMA disable, if enabled this channel. */
|
|
KASSERT((chp->ch_flags & ATACH_NCQ) == 0);
|
|
if (mvport->port_edmamode_curr != nodma)
|
|
mvsata_edma_disable(mvport, 10 /* ms */, wait_flags);
|
|
|
|
mvsata_pmp_select(mvport, xfer->c_drive);
|
|
|
|
/* Do control operations specially. */
|
|
if (__predict_false(drvp->state < READY)) {
|
|
/*
|
|
* Actually, we want to be careful not to mess with
|
|
* the control state if the device is currently busy,
|
|
* but we can assume that we never get to this point
|
|
* if that's the case.
|
|
*/
|
|
/*
|
|
* If it's not a polled command, we need the kernel
|
|
* thread
|
|
*/
|
|
if ((xfer->c_flags & C_POLL) == 0 &&
|
|
(chp->ch_flags & ATACH_TH_RUN) == 0) {
|
|
return ATASTART_TH;
|
|
}
|
|
if (mvsata_bio_ready(mvport, ata_bio, xfer->c_drive,
|
|
(xfer->c_flags & C_POLL) ? AT_POLL : 0) != 0) {
|
|
return ATASTART_ABORT;
|
|
}
|
|
}
|
|
|
|
/* Initiate command! */
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_H, WDSD_IBM);
|
|
switch(wdc_wait_for_ready(chp, ATA_DELAY, wait_flags, &tfd)) {
|
|
case WDCWAIT_OK:
|
|
break;
|
|
case WDCWAIT_TOUT:
|
|
goto timeout;
|
|
case WDCWAIT_THR:
|
|
return ATASTART_TH;
|
|
}
|
|
if (ata_bio->flags & ATA_LBA48)
|
|
wdccommandext(chp, 0, atacmd_to48(cmd),
|
|
ata_bio->blkno, nblks, 0, WDSD_LBA);
|
|
else
|
|
wdccommand(chp, 0, cmd, cyl,
|
|
head, sect, nblks,
|
|
(drvp->lp->d_type == DKTYPE_ST506) ?
|
|
drvp->lp->d_precompcyl / 4 : 0);
|
|
|
|
/* start timeout machinery */
|
|
if ((xfer->c_flags & C_POLL) == 0)
|
|
callout_reset(&xfer->c_timo_callout,
|
|
mstohz(ATA_DELAY), wdctimeout, xfer);
|
|
} else if (ata_bio->nblks > 1) {
|
|
/* The number of blocks in the last stretch may be smaller. */
|
|
nblks = xfer->c_bcount / drvp->lp->d_secsize;
|
|
if (ata_bio->nblks > nblks) {
|
|
ata_bio->nblks = nblks;
|
|
ata_bio->nbytes = xfer->c_bcount;
|
|
}
|
|
}
|
|
/* If this was a write and not using DMA, push the data. */
|
|
if ((ata_bio->flags & ATA_READ) == 0) {
|
|
/*
|
|
* we have to busy-wait here, we can't rely on running in
|
|
* thread context.
|
|
*/
|
|
if (wdc_wait_for_drq(chp, ATA_DELAY, AT_POLL, &tfd) != 0) {
|
|
aprint_error_dev(atac->atac_dev,
|
|
"channel %d: drive %d timeout waiting for DRQ,"
|
|
" st=0x%02x, err=0x%02x\n",
|
|
chp->ch_channel, xfer->c_drive, ATACH_ST(tfd),
|
|
ATACH_ERR(tfd));
|
|
ata_bio->error = TIMEOUT;
|
|
return ATASTART_ABORT;
|
|
}
|
|
if (ATACH_ST(tfd) & WDCS_ERR) {
|
|
ata_bio->error = ERROR;
|
|
ata_bio->r_error = ATACH_ERR(tfd);
|
|
mvsata_bio_done(chp, xfer);
|
|
return ATASTART_ABORT;
|
|
}
|
|
|
|
wdc->dataout_pio(chp, drvp->drive_flags,
|
|
(char *)xfer->c_databuf + xfer->c_skip, ata_bio->nbytes);
|
|
}
|
|
|
|
intr:
|
|
/* Wait for IRQ (either real or polled) */
|
|
if ((ata_bio->flags & ATA_POLL) != 0)
|
|
return ATASTART_POLL;
|
|
else
|
|
return ATASTART_STARTED;
|
|
|
|
timeout:
|
|
aprint_error_dev(atac->atac_dev,
|
|
"channel %d: drive %d not ready, st=0x%02x, err=0x%02x\n",
|
|
chp->ch_channel, xfer->c_drive, ATACH_ST(tfd), ATACH_ERR(tfd));
|
|
ata_bio->error = TIMEOUT;
|
|
return ATASTART_ABORT;
|
|
}
|
|
|
|
static void
|
|
mvsata_bio_poll(struct ata_channel *chp, struct ata_xfer *xfer)
|
|
{
|
|
struct mvsata_port *mvport = (struct mvsata_port *)chp;
|
|
struct mvsata_softc *sc = device_private(MVSATA_DEV2(mvport));
|
|
|
|
/* Wait for at last 400ns for status bit to be valid */
|
|
delay(1);
|
|
if (chp->ch_flags & ATACH_DMA_WAIT) {
|
|
mvsata_edma_wait(mvport, xfer, ATA_DELAY);
|
|
sc->sc_enable_intr(mvport, 1 /*on*/);
|
|
chp->ch_flags &= ~ATACH_DMA_WAIT;
|
|
}
|
|
|
|
if ((xfer->c_bio.flags & ATA_ITSDONE) == 0)
|
|
mvsata_bio_intr(chp, xfer, 0);
|
|
}
|
|
|
|
static int
|
|
mvsata_bio_intr(struct ata_channel *chp, struct ata_xfer *xfer, int irq)
|
|
{
|
|
struct atac_softc *atac = chp->ch_atac;
|
|
struct wdc_softc *wdc = CHAN_TO_WDC(chp);
|
|
struct ata_bio *ata_bio = &xfer->c_bio;
|
|
struct ata_drive_datas *drvp = &chp->ch_drive[xfer->c_drive];
|
|
int tfd;
|
|
|
|
DPRINTF(DEBUG_FUNCS|DEBUG_XFERS, ("%s:%d: %s: drive=%d\n",
|
|
device_xname(atac->atac_dev), chp->ch_channel, __func__,
|
|
xfer->c_drive));
|
|
|
|
ata_channel_lock(chp);
|
|
|
|
chp->ch_flags &= ~(ATACH_DMA_WAIT);
|
|
|
|
/*
|
|
* If we missed an interrupt transfer, reset and restart.
|
|
* Don't try to continue transfer, we may have missed cycles.
|
|
*/
|
|
if (xfer->c_flags & C_TIMEOU) {
|
|
ata_bio->error = TIMEOUT;
|
|
ata_channel_unlock(chp);
|
|
mvsata_bio_done(chp, xfer);
|
|
return 1;
|
|
}
|
|
|
|
/* Is it not a transfer, but a control operation? */
|
|
if (!(xfer->c_flags & C_DMA) && drvp->state < READY) {
|
|
aprint_error_dev(atac->atac_dev,
|
|
"channel %d: drive %d bad state %d in %s\n",
|
|
chp->ch_channel, xfer->c_drive, drvp->state, __func__);
|
|
panic("%s: bad state", __func__);
|
|
}
|
|
|
|
/* Ack interrupt done by wdc_wait_for_unbusy */
|
|
if (!(xfer->c_flags & C_DMA) &&
|
|
(wdc_wait_for_unbusy(chp, (irq == 0) ? ATA_DELAY : 0, AT_POLL, &tfd)
|
|
== WDCWAIT_TOUT)) {
|
|
if (irq && (xfer->c_flags & C_TIMEOU) == 0) {
|
|
ata_channel_unlock(chp);
|
|
return 0; /* IRQ was not for us */
|
|
}
|
|
aprint_error_dev(atac->atac_dev,
|
|
"channel %d: drive %d timeout, c_bcount=%d, c_skip%d\n",
|
|
chp->ch_channel, xfer->c_drive, xfer->c_bcount,
|
|
xfer->c_skip);
|
|
ata_bio->error = TIMEOUT;
|
|
ata_channel_unlock(chp);
|
|
mvsata_bio_done(chp, xfer);
|
|
return 1;
|
|
}
|
|
|
|
if (xfer->c_flags & C_DMA) {
|
|
if (ata_bio->error == NOERROR)
|
|
goto end;
|
|
if (ata_bio->error == ERR_DMA) {
|
|
ata_channel_unlock(chp);
|
|
ata_dmaerr(drvp,
|
|
(xfer->c_flags & C_POLL) ? AT_POLL : 0);
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
/* if we had an error, end */
|
|
if (ata_bio->error != NOERROR) {
|
|
ata_channel_unlock(chp);
|
|
err:
|
|
mvsata_bio_done(chp, xfer);
|
|
return 1;
|
|
}
|
|
|
|
/* If this was a read and not using DMA, fetch the data. */
|
|
if ((ata_bio->flags & ATA_READ) != 0) {
|
|
if ((ATACH_ST(tfd) & WDCS_DRQ) != WDCS_DRQ) {
|
|
aprint_error_dev(atac->atac_dev,
|
|
"channel %d: drive %d read intr before drq\n",
|
|
chp->ch_channel, xfer->c_drive);
|
|
ata_bio->error = TIMEOUT;
|
|
ata_channel_unlock(chp);
|
|
mvsata_bio_done(chp, xfer);
|
|
return 1;
|
|
}
|
|
wdc->datain_pio(chp, drvp->drive_flags,
|
|
(char *)xfer->c_databuf + xfer->c_skip, ata_bio->nbytes);
|
|
}
|
|
|
|
end:
|
|
ata_bio->blkno += ata_bio->nblks;
|
|
ata_bio->blkdone += ata_bio->nblks;
|
|
xfer->c_skip += ata_bio->nbytes;
|
|
xfer->c_bcount -= ata_bio->nbytes;
|
|
|
|
/* See if this transfer is complete. */
|
|
if (xfer->c_bcount > 0) {
|
|
if ((ata_bio->flags & ATA_POLL) == 0) {
|
|
/* Start the next operation */
|
|
ata_xfer_start(xfer);
|
|
} else {
|
|
/* Let mvsata_bio_start do the loop */
|
|
}
|
|
ata_channel_unlock(chp);
|
|
} else { /* Done with this transfer */
|
|
ata_bio->error = NOERROR;
|
|
ata_channel_unlock(chp);
|
|
mvsata_bio_done(chp, xfer);
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
static void
|
|
mvsata_bio_kill_xfer(struct ata_channel *chp, struct ata_xfer *xfer, int reason)
|
|
{
|
|
struct mvsata_port *mvport = (struct mvsata_port *)chp;
|
|
struct atac_softc *atac = chp->ch_atac;
|
|
struct ata_bio *ata_bio = &xfer->c_bio;
|
|
int drive = xfer->c_drive;
|
|
bool deactivate = true;
|
|
|
|
DPRINTF(DEBUG_FUNCS|DEBUG_XFERS,
|
|
("%s:%d: mvsata_bio_kill_xfer: drive=%d\n",
|
|
device_xname(atac->atac_dev), chp->ch_channel, xfer->c_drive));
|
|
|
|
/* EDMA restart, if enabled */
|
|
if (!(xfer->c_flags & C_DMA) && mvport->port_edmamode_curr != nodma) {
|
|
mvsata_edma_reset_qptr(mvport);
|
|
mvsata_edma_enable(mvport);
|
|
}
|
|
|
|
ata_bio->flags |= ATA_ITSDONE;
|
|
switch (reason) {
|
|
case KILL_GONE_INACTIVE:
|
|
deactivate = false;
|
|
/* FALLTHROUGH */
|
|
case KILL_GONE:
|
|
ata_bio->error = ERR_NODEV;
|
|
break;
|
|
case KILL_RESET:
|
|
ata_bio->error = ERR_RESET;
|
|
break;
|
|
case KILL_REQUEUE:
|
|
ata_bio->error = REQUEUE;
|
|
break;
|
|
default:
|
|
aprint_error_dev(atac->atac_dev,
|
|
"mvsata_bio_kill_xfer: unknown reason %d\n", reason);
|
|
panic("mvsata_bio_kill_xfer");
|
|
}
|
|
ata_bio->r_error = WDCE_ABRT;
|
|
|
|
if (deactivate) {
|
|
mvsata_quetag_put(mvport, xfer->c_slot);
|
|
ata_deactivate_xfer(chp, xfer);
|
|
}
|
|
|
|
(*chp->ch_drive[drive].drv_done)(chp->ch_drive[drive].drv_softc, xfer);
|
|
}
|
|
|
|
static void
|
|
mvsata_bio_done(struct ata_channel *chp, struct ata_xfer *xfer)
|
|
{
|
|
struct mvsata_port *mvport = (struct mvsata_port *)chp;
|
|
struct ata_bio *ata_bio = &xfer->c_bio;
|
|
int drive = xfer->c_drive;
|
|
bool iserror = (ata_bio->error != NOERROR);
|
|
|
|
DPRINTF(DEBUG_FUNCS|DEBUG_XFERS,
|
|
("%s:%d: mvsata_bio_done: drive=%d, flags=0x%x\n",
|
|
device_xname(MVSATA_DEV2(mvport)), chp->ch_channel, xfer->c_drive,
|
|
(u_int)xfer->c_flags));
|
|
|
|
/* EDMA restart, if enabled */
|
|
if (!(xfer->c_flags & C_DMA) && mvport->port_edmamode_curr != nodma) {
|
|
mvsata_edma_reset_qptr(mvport);
|
|
mvsata_edma_enable(mvport);
|
|
}
|
|
|
|
if (ata_waitdrain_xfer_check(chp, xfer))
|
|
return;
|
|
|
|
/* feed back residual bcount to our caller */
|
|
ata_bio->bcount = xfer->c_bcount;
|
|
|
|
/* mark controller inactive and free xfer */
|
|
mvsata_quetag_put(mvport, xfer->c_slot);
|
|
ata_deactivate_xfer(chp, xfer);
|
|
|
|
ata_bio->flags |= ATA_ITSDONE;
|
|
(*chp->ch_drive[drive].drv_done)(chp->ch_drive[drive].drv_softc, xfer);
|
|
if (!iserror)
|
|
atastart(chp);
|
|
}
|
|
|
|
static int
|
|
mvsata_bio_ready(struct mvsata_port *mvport, struct ata_bio *ata_bio, int drive,
|
|
int flags)
|
|
{
|
|
struct ata_channel *chp = &mvport->port_ata_channel;
|
|
struct atac_softc *atac = chp->ch_atac;
|
|
struct ata_drive_datas *drvp = &chp->ch_drive[drive];
|
|
const char *errstring;
|
|
int tfd;
|
|
|
|
flags |= AT_POLL; /* XXX */
|
|
|
|
ata_channel_lock_owned(chp);
|
|
|
|
/*
|
|
* disable interrupts, all commands here should be quick
|
|
* enough to be able to poll, and we don't go here that often
|
|
*/
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_CAS, WDCTL_4BIT | WDCTL_IDS);
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_H, WDSD_IBM);
|
|
DELAY(10);
|
|
errstring = "wait";
|
|
if (wdcwait(chp, WDCS_DRDY, WDCS_DRDY, ATA_DELAY, flags, &tfd))
|
|
goto ctrltimeout;
|
|
wdccommandshort(chp, 0, WDCC_RECAL);
|
|
/* Wait for at least 400ns for status bit to be valid */
|
|
DELAY(1);
|
|
errstring = "recal";
|
|
if (wdcwait(chp, WDCS_DRDY, WDCS_DRDY, ATA_DELAY, flags, &tfd))
|
|
goto ctrltimeout;
|
|
if (ATACH_ST(tfd) & (WDCS_ERR | WDCS_DWF))
|
|
goto ctrlerror;
|
|
/* Don't try to set modes if controller can't be adjusted */
|
|
if (atac->atac_set_modes == NULL)
|
|
goto geometry;
|
|
/* Also don't try if the drive didn't report its mode */
|
|
if ((drvp->drive_flags & ATA_DRIVE_MODE) == 0)
|
|
goto geometry;
|
|
wdccommand(chp, 0, SET_FEATURES, 0, 0, 0,
|
|
0x08 | drvp->PIO_mode, WDSF_SET_MODE);
|
|
errstring = "piomode-bio";
|
|
if (wdcwait(chp, WDCS_DRDY, WDCS_DRDY, ATA_DELAY, flags, &tfd))
|
|
goto ctrltimeout;
|
|
if (ATACH_ST(tfd) & (WDCS_ERR | WDCS_DWF))
|
|
goto ctrlerror;
|
|
if (drvp->drive_flags & ATA_DRIVE_UDMA)
|
|
wdccommand(chp, 0, SET_FEATURES, 0, 0, 0,
|
|
0x40 | drvp->UDMA_mode, WDSF_SET_MODE);
|
|
else if (drvp->drive_flags & ATA_DRIVE_DMA)
|
|
wdccommand(chp, 0, SET_FEATURES, 0, 0, 0,
|
|
0x20 | drvp->DMA_mode, WDSF_SET_MODE);
|
|
else
|
|
goto geometry;
|
|
errstring = "dmamode-bio";
|
|
if (wdcwait(chp, WDCS_DRDY, WDCS_DRDY, ATA_DELAY, flags, &tfd))
|
|
goto ctrltimeout;
|
|
if (ATACH_ST(tfd) & (WDCS_ERR | WDCS_DWF))
|
|
goto ctrlerror;
|
|
geometry:
|
|
if (ata_bio->flags & ATA_LBA)
|
|
goto multimode;
|
|
wdccommand(chp, 0, WDCC_IDP, drvp->lp->d_ncylinders,
|
|
drvp->lp->d_ntracks - 1, 0, drvp->lp->d_nsectors,
|
|
(drvp->lp->d_type == DKTYPE_ST506) ?
|
|
drvp->lp->d_precompcyl / 4 : 0);
|
|
errstring = "geometry";
|
|
if (wdcwait(chp, WDCS_DRDY, WDCS_DRDY, ATA_DELAY, flags, &tfd))
|
|
goto ctrltimeout;
|
|
if (ATACH_ST(tfd) & (WDCS_ERR | WDCS_DWF))
|
|
goto ctrlerror;
|
|
multimode:
|
|
if (drvp->multi == 1)
|
|
goto ready;
|
|
wdccommand(chp, 0, WDCC_SETMULTI, 0, 0, 0, drvp->multi, 0);
|
|
errstring = "setmulti";
|
|
if (wdcwait(chp, WDCS_DRDY, WDCS_DRDY, ATA_DELAY, flags, &tfd))
|
|
goto ctrltimeout;
|
|
if (ATACH_ST(tfd) & (WDCS_ERR | WDCS_DWF))
|
|
goto ctrlerror;
|
|
ready:
|
|
drvp->state = READY;
|
|
/*
|
|
* The drive is usable now
|
|
*/
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_CAS, WDCTL_4BIT);
|
|
delay(10); /* some drives need a little delay here */
|
|
return 0;
|
|
|
|
ctrltimeout:
|
|
aprint_error_dev(atac->atac_dev, "channel %d: drive %d %s timed out\n",
|
|
chp->ch_channel, drive, errstring);
|
|
ata_bio->error = TIMEOUT;
|
|
goto ctrldone;
|
|
ctrlerror:
|
|
aprint_error_dev(atac->atac_dev, "channel %d: drive %d %s ",
|
|
chp->ch_channel, drive, errstring);
|
|
if (ATACH_ST(tfd) & WDCS_DWF) {
|
|
aprint_error("drive fault\n");
|
|
ata_bio->error = ERR_DF;
|
|
} else {
|
|
ata_bio->r_error = ATACH_ERR(tfd);
|
|
ata_bio->error = ERROR;
|
|
aprint_error("error (%x)\n", ata_bio->r_error);
|
|
}
|
|
ctrldone:
|
|
drvp->state = 0;
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_CAS, WDCTL_4BIT);
|
|
return -1;
|
|
}
|
|
|
|
static int
|
|
mvsata_exec_command(struct ata_drive_datas *drvp, struct ata_xfer *xfer)
|
|
{
|
|
struct ata_channel *chp = drvp->chnl_softc;
|
|
struct ata_command *ata_c = &xfer->c_ata_c;
|
|
int rv, s;
|
|
|
|
DPRINTF(DEBUG_FUNCS|DEBUG_XFERS,
|
|
("%s:%d: mvsata_exec_command: drive=%d, bcount=%d,"
|
|
" r_lba=0x%012"PRIx64", r_count=0x%04x, r_features=0x%04x,"
|
|
" r_device=0x%02x, r_command=0x%02x\n",
|
|
device_xname(MVSATA_DEV2((struct mvsata_port *)chp)),
|
|
chp->ch_channel,
|
|
drvp->drive, ata_c->bcount, ata_c->r_lba, ata_c->r_count,
|
|
ata_c->r_features, ata_c->r_device, ata_c->r_command));
|
|
|
|
if (ata_c->flags & AT_POLL)
|
|
xfer->c_flags |= C_POLL;
|
|
if (ata_c->flags & AT_WAIT)
|
|
xfer->c_flags |= C_WAIT;
|
|
xfer->c_drive = drvp->drive;
|
|
xfer->c_databuf = ata_c->data;
|
|
xfer->c_bcount = ata_c->bcount;
|
|
xfer->c_start = mvsata_wdc_cmd_start;
|
|
xfer->c_intr = mvsata_wdc_cmd_intr;
|
|
xfer->c_poll = mvsata_wdc_cmd_poll;
|
|
xfer->c_abort = mvsata_wdc_cmd_done;
|
|
xfer->c_kill_xfer = mvsata_wdc_cmd_kill_xfer;
|
|
s = splbio();
|
|
ata_exec_xfer(chp, xfer);
|
|
#ifdef DIAGNOSTIC
|
|
if ((ata_c->flags & AT_POLL) != 0 &&
|
|
(ata_c->flags & AT_DONE) == 0)
|
|
panic("mvsata_exec_command: polled command not done");
|
|
#endif
|
|
if (ata_c->flags & AT_DONE)
|
|
rv = ATACMD_COMPLETE;
|
|
else {
|
|
if (ata_c->flags & AT_WAIT) {
|
|
ata_channel_lock(chp);
|
|
if ((ata_c->flags & AT_DONE) == 0) {
|
|
ata_wait_xfer(chp, xfer);
|
|
KASSERT((ata_c->flags & AT_DONE) != 0);
|
|
}
|
|
ata_channel_unlock(chp);
|
|
rv = ATACMD_COMPLETE;
|
|
} else
|
|
rv = ATACMD_QUEUED;
|
|
}
|
|
splx(s);
|
|
return rv;
|
|
}
|
|
|
|
static int
|
|
mvsata_wdc_cmd_start(struct ata_channel *chp, struct ata_xfer *xfer)
|
|
{
|
|
struct mvsata_port *mvport = (struct mvsata_port *)chp;
|
|
int drive = xfer->c_drive;
|
|
int wait_flags = (xfer->c_flags & C_POLL) ? AT_POLL : 0;
|
|
struct ata_command *ata_c = &xfer->c_ata_c;
|
|
int tfd;
|
|
|
|
DPRINTF(DEBUG_FUNCS|DEBUG_XFERS,
|
|
("%s:%d: mvsata_cmd_start: drive=%d\n",
|
|
device_xname(MVSATA_DEV2(mvport)), chp->ch_channel, drive));
|
|
|
|
ata_channel_lock_owned(chp);
|
|
|
|
mvsata_quetag_get(mvport, xfer->c_slot);
|
|
|
|
/* First, EDMA disable, if enabled this channel. */
|
|
KASSERT((chp->ch_flags & ATACH_NCQ) == 0);
|
|
if (mvport->port_edmamode_curr != nodma)
|
|
mvsata_edma_disable(mvport, 10 /* ms */, wait_flags);
|
|
|
|
mvsata_pmp_select(mvport, drive);
|
|
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_H, WDSD_IBM);
|
|
switch(wdcwait(chp, ata_c->r_st_bmask | WDCS_DRQ,
|
|
ata_c->r_st_bmask, ata_c->timeout, wait_flags, &tfd)) {
|
|
case WDCWAIT_OK:
|
|
break;
|
|
case WDCWAIT_TOUT:
|
|
ata_c->flags |= AT_TIMEOU;
|
|
return ATASTART_ABORT;
|
|
case WDCWAIT_THR:
|
|
return ATASTART_TH;
|
|
}
|
|
if (ata_c->flags & AT_POLL)
|
|
/* polled command, disable interrupts */
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_CAS, WDCTL_4BIT | WDCTL_IDS);
|
|
if ((ata_c->flags & AT_LBA48) != 0) {
|
|
wdccommandext(chp, 0, ata_c->r_command,
|
|
ata_c->r_lba, ata_c->r_count, ata_c->r_features,
|
|
ata_c->r_device & ~0x10);
|
|
} else {
|
|
wdccommand(chp, 0, ata_c->r_command,
|
|
(ata_c->r_lba >> 8) & 0xffff,
|
|
(((ata_c->flags & AT_LBA) != 0) ? WDSD_LBA : 0) |
|
|
((ata_c->r_lba >> 24) & 0x0f),
|
|
ata_c->r_lba & 0xff,
|
|
ata_c->r_count & 0xff,
|
|
ata_c->r_features & 0xff);
|
|
}
|
|
|
|
if ((ata_c->flags & AT_POLL) == 0) {
|
|
callout_reset(&xfer->c_timo_callout, ata_c->timeout / 1000 * hz,
|
|
wdctimeout, xfer);
|
|
return ATASTART_STARTED;
|
|
}
|
|
|
|
return ATASTART_POLL;
|
|
}
|
|
|
|
static void
|
|
mvsata_wdc_cmd_poll(struct ata_channel *chp, struct ata_xfer *xfer)
|
|
{
|
|
/*
|
|
* Polled command. Wait for drive ready or drq. Done in intr().
|
|
* Wait for at last 400ns for status bit to be valid.
|
|
*/
|
|
delay(10); /* 400ns delay */
|
|
mvsata_wdc_cmd_intr(chp, xfer, 0);
|
|
}
|
|
|
|
static int
|
|
mvsata_wdc_cmd_intr(struct ata_channel *chp, struct ata_xfer *xfer, int irq)
|
|
{
|
|
struct mvsata_port *mvport = (struct mvsata_port *)chp;
|
|
struct wdc_softc *wdc = CHAN_TO_WDC(chp);
|
|
struct ata_command *ata_c = &xfer->c_ata_c;
|
|
int bcount = ata_c->bcount;
|
|
char *data = ata_c->data;
|
|
int wflags;
|
|
int drive_flags;
|
|
int tfd;
|
|
|
|
ata_channel_lock(chp);
|
|
|
|
if (ata_c->r_command == WDCC_IDENTIFY ||
|
|
ata_c->r_command == ATAPI_IDENTIFY_DEVICE)
|
|
/*
|
|
* The IDENTIFY data has been designed as an array of
|
|
* u_int16_t, so we can byteswap it on the fly.
|
|
* Historically it's what we have always done so keeping it
|
|
* here ensure binary backward compatibility.
|
|
*/
|
|
drive_flags = ATA_DRIVE_NOSTREAM |
|
|
chp->ch_drive[xfer->c_drive].drive_flags;
|
|
else
|
|
/*
|
|
* Other data structure are opaque and should be transfered
|
|
* as is.
|
|
*/
|
|
drive_flags = chp->ch_drive[xfer->c_drive].drive_flags;
|
|
|
|
if ((ata_c->flags & (AT_WAIT | AT_POLL)) == (AT_WAIT | AT_POLL))
|
|
/* both wait and poll, we can kpause here */
|
|
wflags = AT_WAIT | AT_POLL;
|
|
else
|
|
wflags = AT_POLL;
|
|
|
|
again:
|
|
DPRINTF(DEBUG_FUNCS|DEBUG_XFERS, ("%s:%d: %s: drive=%d\n",
|
|
device_xname(MVSATA_DEV2(mvport)), chp->ch_channel,
|
|
__func__, xfer->c_drive));
|
|
|
|
/*
|
|
* after a ATAPI_SOFT_RESET, the device will have released the bus.
|
|
* Reselect again, it doesn't hurt for others commands, and the time
|
|
* penalty for the extra register write is acceptable,
|
|
* wdc_exec_command() isn't called often (mostly for autoconfig)
|
|
*/
|
|
if ((xfer->c_flags & C_ATAPI) != 0) {
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_H, WDSD_IBM);
|
|
}
|
|
if ((ata_c->flags & AT_XFDONE) != 0) {
|
|
/*
|
|
* We have completed a data xfer. The drive should now be
|
|
* in its initial state
|
|
*/
|
|
if (wdcwait(chp, ata_c->r_st_bmask | WDCS_DRQ,
|
|
ata_c->r_st_bmask, (irq == 0) ? ata_c->timeout : 0,
|
|
wflags, &tfd) == WDCWAIT_TOUT) {
|
|
if (irq && (xfer->c_flags & C_TIMEOU) == 0) {
|
|
ata_channel_unlock(chp);
|
|
return 0; /* IRQ was not for us */
|
|
}
|
|
ata_c->flags |= AT_TIMEOU;
|
|
}
|
|
goto out;
|
|
}
|
|
if (wdcwait(chp, ata_c->r_st_pmask, ata_c->r_st_pmask,
|
|
(irq == 0) ? ata_c->timeout : 0, wflags, &tfd) == WDCWAIT_TOUT) {
|
|
if (irq && (xfer->c_flags & C_TIMEOU) == 0) {
|
|
ata_channel_unlock(chp);
|
|
return 0; /* IRQ was not for us */
|
|
}
|
|
ata_c->flags |= AT_TIMEOU;
|
|
goto out;
|
|
}
|
|
delay(20); /* XXXXX: Delay more times. */
|
|
if (ata_c->flags & AT_READ) {
|
|
if ((ATACH_ST(tfd) & WDCS_DRQ) == 0) {
|
|
ata_c->flags |= AT_TIMEOU;
|
|
goto out;
|
|
}
|
|
wdc->datain_pio(chp, drive_flags, data, bcount);
|
|
/* at this point the drive should be in its initial state */
|
|
ata_c->flags |= AT_XFDONE;
|
|
/*
|
|
* XXX checking the status register again here cause some
|
|
* hardware to timeout.
|
|
*/
|
|
} else if (ata_c->flags & AT_WRITE) {
|
|
if ((ATACH_ST(tfd) & WDCS_DRQ) == 0) {
|
|
ata_c->flags |= AT_TIMEOU;
|
|
goto out;
|
|
}
|
|
wdc->dataout_pio(chp, drive_flags, data, bcount);
|
|
ata_c->flags |= AT_XFDONE;
|
|
if ((ata_c->flags & AT_POLL) == 0) {
|
|
callout_reset(&xfer->c_timo_callout,
|
|
mstohz(ata_c->timeout), wdctimeout, xfer);
|
|
ata_channel_unlock(chp);
|
|
return 1;
|
|
} else
|
|
goto again;
|
|
}
|
|
out:
|
|
if (ATACH_ST(tfd) & WDCS_DWF)
|
|
ata_c->flags |= AT_DF;
|
|
if (ATACH_ST(tfd) & WDCS_ERR) {
|
|
ata_c->flags |= AT_ERROR;
|
|
ata_c->r_error = ATACH_ERR(tfd);
|
|
}
|
|
ata_channel_unlock(chp);
|
|
mvsata_wdc_cmd_done(chp, xfer);
|
|
|
|
if ((ATACH_ST(tfd) & WDCS_ERR) == 0)
|
|
atastart(chp);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void
|
|
mvsata_wdc_cmd_kill_xfer(struct ata_channel *chp, struct ata_xfer *xfer,
|
|
int reason)
|
|
{
|
|
struct mvsata_port *mvport = (struct mvsata_port *)chp;
|
|
struct ata_command *ata_c = &xfer->c_ata_c;
|
|
bool deactivate = true;
|
|
|
|
DPRINTF(DEBUG_FUNCS|DEBUG_XFERS,
|
|
("%s:%d: mvsata_cmd_kill_xfer: drive=%d\n",
|
|
device_xname(MVSATA_DEV2(mvport)), chp->ch_channel, xfer->c_drive));
|
|
|
|
switch (reason) {
|
|
case KILL_GONE_INACTIVE:
|
|
deactivate = false;
|
|
/* FALLTHROUGH */
|
|
case KILL_GONE:
|
|
ata_c->flags |= AT_GONE;
|
|
break;
|
|
case KILL_RESET:
|
|
ata_c->flags |= AT_RESET;
|
|
break;
|
|
case KILL_REQUEUE:
|
|
panic("%s: not supposed to be requeued\n", __func__);
|
|
break;
|
|
default:
|
|
aprint_error_dev(MVSATA_DEV2(mvport),
|
|
"mvsata_cmd_kill_xfer: unknown reason %d\n", reason);
|
|
panic("mvsata_cmd_kill_xfer");
|
|
}
|
|
|
|
if (deactivate) {
|
|
mvsata_quetag_put(mvport, xfer->c_slot);
|
|
ata_deactivate_xfer(chp, xfer);
|
|
}
|
|
|
|
mvsata_wdc_cmd_done_end(chp, xfer);
|
|
}
|
|
|
|
static void
|
|
mvsata_wdc_cmd_done(struct ata_channel *chp, struct ata_xfer *xfer)
|
|
{
|
|
struct mvsata_port *mvport = (struct mvsata_port *)chp;
|
|
struct atac_softc *atac = chp->ch_atac;
|
|
struct ata_command *ata_c = &xfer->c_ata_c;
|
|
|
|
DPRINTF(DEBUG_FUNCS|DEBUG_XFERS,
|
|
("%s:%d: mvsata_cmd_done: drive=%d, flags=0x%x\n",
|
|
device_xname(atac->atac_dev), chp->ch_channel, xfer->c_drive,
|
|
ata_c->flags));
|
|
|
|
if (ata_waitdrain_xfer_check(chp, xfer))
|
|
return;
|
|
|
|
if ((ata_c->flags & AT_READREG) != 0 &&
|
|
device_is_active(atac->atac_dev) &&
|
|
(ata_c->flags & (AT_ERROR | AT_DF)) == 0) {
|
|
ata_c->r_status = MVSATA_WDC_READ_1(mvport, SRB_CS);
|
|
ata_c->r_error = MVSATA_WDC_READ_1(mvport, SRB_FE);
|
|
ata_c->r_count = MVSATA_WDC_READ_1(mvport, SRB_SC);
|
|
ata_c->r_lba =
|
|
(uint64_t)MVSATA_WDC_READ_1(mvport, SRB_LBAL) << 0;
|
|
ata_c->r_lba |=
|
|
(uint64_t)MVSATA_WDC_READ_1(mvport, SRB_LBAM) << 8;
|
|
ata_c->r_lba |=
|
|
(uint64_t)MVSATA_WDC_READ_1(mvport, SRB_LBAH) << 16;
|
|
ata_c->r_device = MVSATA_WDC_READ_1(mvport, SRB_H);
|
|
if ((ata_c->flags & AT_LBA48) != 0) {
|
|
if ((ata_c->flags & AT_POLL) != 0) {
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_CAS,
|
|
WDCTL_HOB|WDCTL_4BIT|WDCTL_IDS);
|
|
} else {
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_CAS,
|
|
WDCTL_HOB|WDCTL_4BIT);
|
|
}
|
|
ata_c->r_count |=
|
|
MVSATA_WDC_READ_1(mvport, SRB_SC) << 8;
|
|
ata_c->r_lba |=
|
|
(uint64_t)MVSATA_WDC_READ_1(mvport, SRB_LBAL) << 24;
|
|
ata_c->r_lba |=
|
|
(uint64_t)MVSATA_WDC_READ_1(mvport, SRB_LBAM) << 32;
|
|
ata_c->r_lba |=
|
|
(uint64_t)MVSATA_WDC_READ_1(mvport, SRB_LBAH) << 40;
|
|
if ((ata_c->flags & AT_POLL) != 0) {
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_CAS,
|
|
WDCTL_4BIT|WDCTL_IDS);
|
|
} else {
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_CAS,
|
|
WDCTL_4BIT);
|
|
}
|
|
} else {
|
|
ata_c->r_lba |=
|
|
(uint64_t)(ata_c->r_device & 0x0f) << 24;
|
|
}
|
|
}
|
|
|
|
mvsata_quetag_put(mvport, xfer->c_slot);
|
|
ata_deactivate_xfer(chp, xfer);
|
|
|
|
if (ata_c->flags & AT_POLL) {
|
|
/* enable interrupts */
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_CAS, WDCTL_4BIT);
|
|
delay(10); /* some drives need a little delay here */
|
|
}
|
|
|
|
mvsata_wdc_cmd_done_end(chp, xfer);
|
|
}
|
|
|
|
static void
|
|
mvsata_wdc_cmd_done_end(struct ata_channel *chp, struct ata_xfer *xfer)
|
|
{
|
|
struct mvsata_port *mvport = (struct mvsata_port *)chp;
|
|
struct ata_command *ata_c = &xfer->c_ata_c;
|
|
|
|
/* EDMA restart, if enabled */
|
|
if (mvport->port_edmamode_curr != nodma) {
|
|
mvsata_edma_reset_qptr(mvport);
|
|
mvsata_edma_enable(mvport);
|
|
}
|
|
|
|
ata_channel_lock(chp);
|
|
ata_c->flags |= AT_DONE;
|
|
if (ata_c->flags & AT_WAIT)
|
|
ata_wake_xfer(chp, xfer);
|
|
ata_channel_unlock(chp);
|
|
}
|
|
|
|
#if NATAPIBUS > 0
|
|
static void
|
|
mvsata_atapi_scsipi_request(struct scsipi_channel *chan,
|
|
scsipi_adapter_req_t req, void *arg)
|
|
{
|
|
struct scsipi_adapter *adapt = chan->chan_adapter;
|
|
struct scsipi_periph *periph;
|
|
struct scsipi_xfer *sc_xfer;
|
|
struct mvsata_softc *sc = device_private(adapt->adapt_dev);
|
|
struct atac_softc *atac = &sc->sc_wdcdev.sc_atac;
|
|
struct ata_channel *chp = atac->atac_channels[chan->chan_channel];
|
|
struct ata_xfer *xfer;
|
|
int drive, s;
|
|
|
|
switch (req) {
|
|
case ADAPTER_REQ_RUN_XFER:
|
|
sc_xfer = arg;
|
|
periph = sc_xfer->xs_periph;
|
|
drive = periph->periph_target;
|
|
|
|
if (!device_is_active(atac->atac_dev)) {
|
|
sc_xfer->error = XS_DRIVER_STUFFUP;
|
|
scsipi_done(sc_xfer);
|
|
return;
|
|
}
|
|
xfer = ata_get_xfer_ext(chp, false, 0);
|
|
if (xfer == NULL) {
|
|
sc_xfer->error = XS_RESOURCE_SHORTAGE;
|
|
scsipi_done(sc_xfer);
|
|
return;
|
|
}
|
|
|
|
if (sc_xfer->xs_control & XS_CTL_POLL)
|
|
xfer->c_flags |= C_POLL;
|
|
xfer->c_drive = drive;
|
|
xfer->c_flags |= C_ATAPI;
|
|
xfer->c_scsipi = sc_xfer;
|
|
xfer->c_databuf = sc_xfer->data;
|
|
xfer->c_bcount = sc_xfer->datalen;
|
|
xfer->c_start = mvsata_atapi_start;
|
|
xfer->c_intr = mvsata_atapi_intr;
|
|
xfer->c_poll = mvsata_atapi_poll;
|
|
xfer->c_abort = mvsata_atapi_reset;
|
|
xfer->c_kill_xfer = mvsata_atapi_kill_xfer;
|
|
xfer->c_dscpoll = 0;
|
|
s = splbio();
|
|
ata_exec_xfer(chp, xfer);
|
|
#ifdef DIAGNOSTIC
|
|
if ((sc_xfer->xs_control & XS_CTL_POLL) != 0 &&
|
|
(sc_xfer->xs_status & XS_STS_DONE) == 0)
|
|
panic("mvsata_atapi_scsipi_request:"
|
|
" polled command not done");
|
|
#endif
|
|
splx(s);
|
|
return;
|
|
|
|
default:
|
|
/* Not supported, nothing to do. */
|
|
;
|
|
}
|
|
}
|
|
|
|
static int
|
|
mvsata_atapi_start(struct ata_channel *chp, struct ata_xfer *xfer)
|
|
{
|
|
struct mvsata_softc *sc = (struct mvsata_softc *)chp->ch_atac;
|
|
struct mvsata_port *mvport = (struct mvsata_port *)chp;
|
|
struct atac_softc *atac = &sc->sc_wdcdev.sc_atac;
|
|
struct scsipi_xfer *sc_xfer = xfer->c_scsipi;
|
|
struct ata_drive_datas *drvp = &chp->ch_drive[xfer->c_drive];
|
|
const int wait_flags = (xfer->c_flags & C_POLL) ? AT_POLL : 0;
|
|
const char *errstring;
|
|
int tfd;
|
|
|
|
DPRINTF(DEBUG_FUNCS|DEBUG_XFERS,
|
|
("%s:%d:%d: mvsata_atapi_start: scsi flags 0x%x\n",
|
|
device_xname(chp->ch_atac->atac_dev), chp->ch_channel,
|
|
xfer->c_drive, sc_xfer->xs_control));
|
|
|
|
ata_channel_lock_owned(chp);
|
|
|
|
mvsata_quetag_get(mvport, xfer->c_slot);
|
|
|
|
KASSERT((chp->ch_flags & ATACH_NCQ) == 0);
|
|
if (mvport->port_edmamode_curr != nodma)
|
|
mvsata_edma_disable(mvport, 10 /* ms */, wait_flags);
|
|
|
|
mvsata_pmp_select(mvport, xfer->c_drive);
|
|
|
|
if ((xfer->c_flags & C_DMA) && (drvp->n_xfers <= NXFER))
|
|
drvp->n_xfers++;
|
|
|
|
/* Do control operations specially. */
|
|
if (__predict_false(drvp->state < READY)) {
|
|
/* If it's not a polled command, we need the kernel thread */
|
|
if ((sc_xfer->xs_control & XS_CTL_POLL) == 0 &&
|
|
(chp->ch_flags & ATACH_TH_RUN) == 0) {
|
|
return ATASTART_TH;
|
|
}
|
|
/*
|
|
* disable interrupts, all commands here should be quick
|
|
* enough to be able to poll, and we don't go here that often
|
|
*/
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_CAS, WDCTL_4BIT | WDCTL_IDS);
|
|
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_H, WDSD_IBM);
|
|
/* Don't try to set mode if controller can't be adjusted */
|
|
if (atac->atac_set_modes == NULL)
|
|
goto ready;
|
|
/* Also don't try if the drive didn't report its mode */
|
|
if ((drvp->drive_flags & ATA_DRIVE_MODE) == 0)
|
|
goto ready;
|
|
errstring = "unbusy";
|
|
if (wdc_wait_for_unbusy(chp, ATAPI_DELAY, wait_flags, &tfd))
|
|
goto timeout;
|
|
wdccommand(chp, 0, SET_FEATURES, 0, 0, 0,
|
|
0x08 | drvp->PIO_mode, WDSF_SET_MODE);
|
|
errstring = "piomode-atapi";
|
|
if (wdc_wait_for_unbusy(chp, ATAPI_MODE_DELAY, wait_flags,
|
|
&tfd))
|
|
goto timeout;
|
|
if (ATACH_ST(tfd) & WDCS_ERR) {
|
|
if (ATACH_ERR(tfd) == WDCE_ABRT) {
|
|
/*
|
|
* Some ATAPI drives reject PIO settings.
|
|
* Fall back to PIO mode 3 since that's the
|
|
* minimum for ATAPI.
|
|
*/
|
|
aprint_error_dev(atac->atac_dev,
|
|
"channel %d drive %d: PIO mode %d rejected,"
|
|
" falling back to PIO mode 3\n",
|
|
chp->ch_channel, xfer->c_drive,
|
|
drvp->PIO_mode);
|
|
if (drvp->PIO_mode > 3)
|
|
drvp->PIO_mode = 3;
|
|
} else
|
|
goto error;
|
|
}
|
|
if (drvp->drive_flags & ATA_DRIVE_UDMA)
|
|
wdccommand(chp, 0, SET_FEATURES, 0, 0, 0,
|
|
0x40 | drvp->UDMA_mode, WDSF_SET_MODE);
|
|
else
|
|
if (drvp->drive_flags & ATA_DRIVE_DMA)
|
|
wdccommand(chp, 0, SET_FEATURES, 0, 0, 0,
|
|
0x20 | drvp->DMA_mode, WDSF_SET_MODE);
|
|
else
|
|
goto ready;
|
|
errstring = "dmamode-atapi";
|
|
if (wdc_wait_for_unbusy(chp, ATAPI_MODE_DELAY, wait_flags,
|
|
&tfd))
|
|
goto timeout;
|
|
if (ATACH_ST(tfd) & WDCS_ERR) {
|
|
if (ATACH_ERR(tfd) == WDCE_ABRT) {
|
|
if (drvp->drive_flags & ATA_DRIVE_UDMA)
|
|
goto error;
|
|
else {
|
|
/*
|
|
* The drive rejected our DMA setting.
|
|
* Fall back to mode 1.
|
|
*/
|
|
aprint_error_dev(atac->atac_dev,
|
|
"channel %d drive %d:"
|
|
" DMA mode %d rejected,"
|
|
" falling back to DMA mode 0\n",
|
|
chp->ch_channel, xfer->c_drive,
|
|
drvp->DMA_mode);
|
|
if (drvp->DMA_mode > 0)
|
|
drvp->DMA_mode = 0;
|
|
}
|
|
} else
|
|
goto error;
|
|
}
|
|
ready:
|
|
drvp->state = READY;
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_CAS, WDCTL_4BIT);
|
|
delay(10); /* some drives need a little delay here */
|
|
}
|
|
/* start timeout machinery */
|
|
if ((sc_xfer->xs_control & XS_CTL_POLL) == 0)
|
|
callout_reset(&xfer->c_timo_callout, mstohz(sc_xfer->timeout),
|
|
wdctimeout, xfer);
|
|
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_H, WDSD_IBM);
|
|
if (wdc_wait_for_unbusy(chp, ATAPI_DELAY, wait_flags, &tfd) != 0) {
|
|
aprint_error_dev(atac->atac_dev, "not ready, st = %02x\n",
|
|
ATACH_ST(tfd));
|
|
sc_xfer->error = XS_TIMEOUT;
|
|
return ATASTART_ABORT;
|
|
}
|
|
|
|
/*
|
|
* Even with WDCS_ERR, the device should accept a command packet
|
|
* Limit length to what can be stuffed into the cylinder register
|
|
* (16 bits). Some CD-ROMs seem to interpret '0' as 65536,
|
|
* but not all devices do that and it's not obvious from the
|
|
* ATAPI spec that that behaviour should be expected. If more
|
|
* data is necessary, multiple data transfer phases will be done.
|
|
*/
|
|
|
|
wdccommand(chp, 0, ATAPI_PKT_CMD,
|
|
xfer->c_bcount <= 0xffff ? xfer->c_bcount : 0xffff, 0, 0, 0,
|
|
(xfer->c_flags & C_DMA) ? ATAPI_PKT_CMD_FTRE_DMA : 0);
|
|
|
|
/*
|
|
* If there is no interrupt for CMD input, busy-wait for it (done in
|
|
* the interrupt routine. Poll routine will exit early in this case.
|
|
*/
|
|
if ((sc_xfer->xs_periph->periph_cap & ATAPI_CFG_DRQ_MASK) !=
|
|
ATAPI_CFG_IRQ_DRQ || (sc_xfer->xs_control & XS_CTL_POLL))
|
|
return ATASTART_POLL;
|
|
else
|
|
return ATASTART_STARTED;
|
|
|
|
timeout:
|
|
aprint_error_dev(atac->atac_dev, "channel %d drive %d: %s timed out\n",
|
|
chp->ch_channel, xfer->c_drive, errstring);
|
|
sc_xfer->error = XS_TIMEOUT;
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_CAS, WDCTL_4BIT);
|
|
delay(10); /* some drives need a little delay here */
|
|
return ATASTART_ABORT;
|
|
|
|
error:
|
|
aprint_error_dev(atac->atac_dev,
|
|
"channel %d drive %d: %s error (0x%x)\n",
|
|
chp->ch_channel, xfer->c_drive, errstring, ATACH_ERR(tfd));
|
|
sc_xfer->error = XS_SHORTSENSE;
|
|
sc_xfer->sense.atapi_sense = ATACH_ERR(tfd);
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_CAS, WDCTL_4BIT);
|
|
delay(10); /* some drives need a little delay here */
|
|
return ATASTART_ABORT;
|
|
}
|
|
|
|
static void
|
|
mvsata_atapi_poll(struct ata_channel *chp, struct ata_xfer *xfer)
|
|
{
|
|
/*
|
|
* If there is no interrupt for CMD input, busy-wait for it (done in
|
|
* the interrupt routine. If it is a polled command, call the interrupt
|
|
* routine until command is done.
|
|
*/
|
|
const bool poll = ((xfer->c_scsipi->xs_control & XS_CTL_POLL) != 0);
|
|
|
|
/* Wait for at last 400ns for status bit to be valid */
|
|
DELAY(1);
|
|
mvsata_atapi_intr(chp, xfer, 0);
|
|
|
|
if (!poll)
|
|
return;
|
|
|
|
if (chp->ch_flags & ATACH_DMA_WAIT) {
|
|
wdc_dmawait(chp, xfer, xfer->c_scsipi->timeout);
|
|
chp->ch_flags &= ~ATACH_DMA_WAIT;
|
|
}
|
|
|
|
while ((xfer->c_scsipi->xs_status & XS_STS_DONE) == 0) {
|
|
/* Wait for at last 400ns for status bit to be valid */
|
|
DELAY(1);
|
|
mvsata_atapi_intr(chp, xfer, 0);
|
|
}
|
|
}
|
|
|
|
static int
|
|
mvsata_atapi_intr(struct ata_channel *chp, struct ata_xfer *xfer, int irq)
|
|
{
|
|
struct mvsata_port *mvport = (struct mvsata_port *)chp;
|
|
struct atac_softc *atac = chp->ch_atac;
|
|
struct wdc_softc *wdc = CHAN_TO_WDC(chp);
|
|
struct scsipi_xfer *sc_xfer = xfer->c_scsipi;
|
|
struct ata_drive_datas *drvp = &chp->ch_drive[xfer->c_drive];
|
|
int len, phase, ire, error, retries=0, i;
|
|
int tfd;
|
|
void *cmd;
|
|
|
|
ata_channel_lock(chp);
|
|
|
|
DPRINTF(DEBUG_FUNCS|DEBUG_XFERS,
|
|
("%s:%d:%d: mvsata_atapi_intr\n",
|
|
device_xname(atac->atac_dev), chp->ch_channel, xfer->c_drive));
|
|
|
|
/* Is it not a transfer, but a control operation? */
|
|
if (drvp->state < READY) {
|
|
aprint_error_dev(atac->atac_dev,
|
|
"channel %d drive %d: bad state %d\n",
|
|
chp->ch_channel, xfer->c_drive, drvp->state);
|
|
panic("mvsata_atapi_intr: bad state");
|
|
}
|
|
/*
|
|
* If we missed an interrupt in a PIO transfer, reset and restart.
|
|
* Don't try to continue transfer, we may have missed cycles.
|
|
*/
|
|
if ((xfer->c_flags & (C_TIMEOU | C_DMA)) == C_TIMEOU) {
|
|
ata_channel_unlock(chp);
|
|
sc_xfer->error = XS_TIMEOUT;
|
|
mvsata_atapi_reset(chp, xfer);
|
|
return 1;
|
|
}
|
|
|
|
/* Ack interrupt done in wdc_wait_for_unbusy */
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_H, WDSD_IBM);
|
|
if (wdc_wait_for_unbusy(chp,
|
|
(irq == 0) ? sc_xfer->timeout : 0, AT_POLL, &tfd) == WDCWAIT_TOUT) {
|
|
if (irq && (xfer->c_flags & C_TIMEOU) == 0) {
|
|
ata_channel_unlock(chp);
|
|
return 0; /* IRQ was not for us */
|
|
}
|
|
aprint_error_dev(atac->atac_dev,
|
|
"channel %d: device timeout, c_bcount=%d, c_skip=%d\n",
|
|
chp->ch_channel, xfer->c_bcount, xfer->c_skip);
|
|
ata_channel_unlock(chp);
|
|
if (xfer->c_flags & C_DMA)
|
|
ata_dmaerr(drvp,
|
|
(xfer->c_flags & C_POLL) ? AT_POLL : 0);
|
|
sc_xfer->error = XS_TIMEOUT;
|
|
mvsata_atapi_reset(chp, xfer);
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* If we missed an IRQ and were using DMA, flag it as a DMA error
|
|
* and reset device.
|
|
*/
|
|
if ((xfer->c_flags & C_TIMEOU) && (xfer->c_flags & C_DMA)) {
|
|
ata_channel_unlock(chp);
|
|
ata_dmaerr(drvp, (xfer->c_flags & C_POLL) ? AT_POLL : 0);
|
|
sc_xfer->error = XS_RESET;
|
|
mvsata_atapi_reset(chp, xfer);
|
|
return (1);
|
|
}
|
|
/*
|
|
* if the request sense command was aborted, report the short sense
|
|
* previously recorded, else continue normal processing
|
|
*/
|
|
|
|
again:
|
|
len = MVSATA_WDC_READ_1(mvport, SRB_LBAM) +
|
|
256 * MVSATA_WDC_READ_1(mvport, SRB_LBAH);
|
|
ire = MVSATA_WDC_READ_1(mvport, SRB_SC);
|
|
phase = (ire & (WDCI_CMD | WDCI_IN)) | (ATACH_ST(tfd) & WDCS_DRQ);
|
|
DPRINTF(DEBUG_FUNCS|DEBUG_XFERS, (
|
|
"mvsata_atapi_intr: c_bcount %d len %d st 0x%x err 0x%x ire 0x%x :",
|
|
xfer->c_bcount, len, ATACH_ST(tfd), ATACH_ERR(tfd), ire));
|
|
|
|
switch (phase) {
|
|
case PHASE_CMDOUT:
|
|
cmd = sc_xfer->cmd;
|
|
DPRINTF(DEBUG_FUNCS|DEBUG_XFERS, ("PHASE_CMDOUT\n"));
|
|
/* Init the DMA channel if necessary */
|
|
if (xfer->c_flags & C_DMA) {
|
|
error = mvsata_bdma_init(mvport, xfer);
|
|
if (error) {
|
|
if (error == EINVAL) {
|
|
/*
|
|
* We can't do DMA on this transfer
|
|
* for some reason. Fall back to PIO.
|
|
*/
|
|
xfer->c_flags &= ~C_DMA;
|
|
error = 0;
|
|
} else {
|
|
sc_xfer->error = XS_DRIVER_STUFFUP;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* send packet command */
|
|
/* Commands are 12 or 16 bytes long. It's 32-bit aligned */
|
|
wdc->dataout_pio(chp, drvp->drive_flags, cmd, sc_xfer->cmdlen);
|
|
|
|
/* Start the DMA channel if necessary */
|
|
if (xfer->c_flags & C_DMA) {
|
|
mvsata_bdma_start(mvport);
|
|
chp->ch_flags |= ATACH_DMA_WAIT;
|
|
}
|
|
ata_channel_unlock(chp);
|
|
return 1;
|
|
|
|
case PHASE_DATAOUT:
|
|
/* write data */
|
|
DPRINTF(DEBUG_XFERS, ("PHASE_DATAOUT\n"));
|
|
if ((sc_xfer->xs_control & XS_CTL_DATA_OUT) == 0 ||
|
|
(xfer->c_flags & C_DMA) != 0) {
|
|
aprint_error_dev(atac->atac_dev,
|
|
"channel %d drive %d: bad data phase DATAOUT\n",
|
|
chp->ch_channel, xfer->c_drive);
|
|
ata_channel_unlock(chp);
|
|
if (xfer->c_flags & C_DMA)
|
|
ata_dmaerr(drvp,
|
|
(xfer->c_flags & C_POLL) ? AT_POLL : 0);
|
|
sc_xfer->error = XS_TIMEOUT;
|
|
mvsata_atapi_reset(chp, xfer);
|
|
return 1;
|
|
}
|
|
xfer->c_lenoff = len - xfer->c_bcount;
|
|
if (xfer->c_bcount < len) {
|
|
aprint_error_dev(atac->atac_dev, "channel %d drive %d:"
|
|
" warning: write only %d of %d requested bytes\n",
|
|
chp->ch_channel, xfer->c_drive, xfer->c_bcount,
|
|
len);
|
|
len = xfer->c_bcount;
|
|
}
|
|
|
|
wdc->dataout_pio(chp, drvp->drive_flags,
|
|
(char *)xfer->c_databuf + xfer->c_skip, len);
|
|
|
|
for (i = xfer->c_lenoff; i > 0; i -= 2)
|
|
MVSATA_WDC_WRITE_2(mvport, SRB_PIOD, 0);
|
|
|
|
xfer->c_skip += len;
|
|
xfer->c_bcount -= len;
|
|
ata_channel_unlock(chp);
|
|
return 1;
|
|
|
|
case PHASE_DATAIN:
|
|
/* Read data */
|
|
DPRINTF(DEBUG_XFERS, ("PHASE_DATAIN\n"));
|
|
if ((sc_xfer->xs_control & XS_CTL_DATA_IN) == 0 ||
|
|
(xfer->c_flags & C_DMA) != 0) {
|
|
aprint_error_dev(atac->atac_dev,
|
|
"channel %d drive %d: bad data phase DATAIN\n",
|
|
chp->ch_channel, xfer->c_drive);
|
|
ata_channel_unlock(chp);
|
|
if (xfer->c_flags & C_DMA)
|
|
ata_dmaerr(drvp,
|
|
(xfer->c_flags & C_POLL) ? AT_POLL : 0);
|
|
sc_xfer->error = XS_TIMEOUT;
|
|
mvsata_atapi_reset(chp, xfer);
|
|
return 1;
|
|
}
|
|
xfer->c_lenoff = len - xfer->c_bcount;
|
|
if (xfer->c_bcount < len) {
|
|
aprint_error_dev(atac->atac_dev, "channel %d drive %d:"
|
|
" warning: reading only %d of %d bytes\n",
|
|
chp->ch_channel, xfer->c_drive, xfer->c_bcount,
|
|
len);
|
|
len = xfer->c_bcount;
|
|
}
|
|
|
|
wdc->datain_pio(chp, drvp->drive_flags,
|
|
(char *)xfer->c_databuf + xfer->c_skip, len);
|
|
|
|
if (xfer->c_lenoff > 0)
|
|
wdcbit_bucket(chp, len - xfer->c_bcount);
|
|
|
|
xfer->c_skip += len;
|
|
xfer->c_bcount -= len;
|
|
ata_channel_unlock(chp);
|
|
return 1;
|
|
|
|
case PHASE_ABORTED:
|
|
case PHASE_COMPLETED:
|
|
DPRINTF(DEBUG_XFERS, ("PHASE_COMPLETED\n"));
|
|
if (xfer->c_flags & C_DMA)
|
|
xfer->c_bcount -= sc_xfer->datalen;
|
|
sc_xfer->resid = xfer->c_bcount;
|
|
/* this will unlock channel lock too */
|
|
mvsata_atapi_phase_complete(xfer);
|
|
return 1;
|
|
|
|
default:
|
|
if (++retries<500) {
|
|
DELAY(100);
|
|
tfd = ATACH_ERR_ST(
|
|
MVSATA_WDC_READ_1(mvport, SRB_FE),
|
|
MVSATA_WDC_READ_1(mvport, SRB_CS)
|
|
);
|
|
goto again;
|
|
}
|
|
aprint_error_dev(atac->atac_dev,
|
|
"channel %d drive %d: unknown phase 0x%x\n",
|
|
chp->ch_channel, xfer->c_drive, phase);
|
|
if (ATACH_ST(tfd) & WDCS_ERR) {
|
|
sc_xfer->error = XS_SHORTSENSE;
|
|
sc_xfer->sense.atapi_sense = ATACH_ERR(tfd);
|
|
} else {
|
|
ata_channel_unlock(chp);
|
|
if (xfer->c_flags & C_DMA)
|
|
ata_dmaerr(drvp,
|
|
(xfer->c_flags & C_POLL) ? AT_POLL : 0);
|
|
sc_xfer->error = XS_RESET;
|
|
mvsata_atapi_reset(chp, xfer);
|
|
return (1);
|
|
}
|
|
}
|
|
DPRINTF(DEBUG_FUNCS|DEBUG_XFERS,
|
|
("mvsata_atapi_intr: %s (end), error 0x%x "
|
|
"sense 0x%x\n", __func__,
|
|
sc_xfer->error, sc_xfer->sense.atapi_sense));
|
|
ata_channel_unlock(chp);
|
|
mvsata_atapi_done(chp, xfer);
|
|
return 1;
|
|
}
|
|
|
|
static void
|
|
mvsata_atapi_kill_xfer(struct ata_channel *chp, struct ata_xfer *xfer,
|
|
int reason)
|
|
{
|
|
struct mvsata_port *mvport = (struct mvsata_port *)chp;
|
|
struct scsipi_xfer *sc_xfer = xfer->c_scsipi;
|
|
bool deactivate = true;
|
|
|
|
/* remove this command from xfer queue */
|
|
switch (reason) {
|
|
case KILL_GONE_INACTIVE:
|
|
deactivate = false;
|
|
/* FALLTHROUGH */
|
|
case KILL_GONE:
|
|
sc_xfer->error = XS_DRIVER_STUFFUP;
|
|
break;
|
|
case KILL_RESET:
|
|
sc_xfer->error = XS_RESET;
|
|
break;
|
|
case KILL_REQUEUE:
|
|
sc_xfer->error = XS_REQUEUE;
|
|
break;
|
|
default:
|
|
aprint_error_dev(MVSATA_DEV2(mvport),
|
|
"mvsata_atapi_kill_xfer: unknown reason %d\n", reason);
|
|
panic("mvsata_atapi_kill_xfer");
|
|
}
|
|
|
|
if (deactivate) {
|
|
mvsata_quetag_put(mvport, xfer->c_slot);
|
|
ata_deactivate_xfer(chp, xfer);
|
|
}
|
|
|
|
ata_free_xfer(chp, xfer);
|
|
scsipi_done(sc_xfer);
|
|
}
|
|
|
|
static void
|
|
mvsata_atapi_reset(struct ata_channel *chp, struct ata_xfer *xfer)
|
|
{
|
|
struct mvsata_port *mvport = (struct mvsata_port *)chp;
|
|
struct atac_softc *atac = chp->ch_atac;
|
|
struct ata_drive_datas *drvp = &chp->ch_drive[xfer->c_drive];
|
|
struct scsipi_xfer *sc_xfer = xfer->c_scsipi;
|
|
int tfd;
|
|
|
|
ata_channel_lock(chp);
|
|
|
|
mvsata_pmp_select(mvport, xfer->c_drive);
|
|
|
|
wdccommandshort(chp, 0, ATAPI_SOFT_RESET);
|
|
drvp->state = 0;
|
|
if (wdc_wait_for_unbusy(chp, WDC_RESET_WAIT, AT_POLL, &tfd) != 0) {
|
|
printf("%s:%d:%d: reset failed\n", device_xname(atac->atac_dev),
|
|
chp->ch_channel, xfer->c_drive);
|
|
sc_xfer->error = XS_SELTIMEOUT;
|
|
}
|
|
|
|
ata_channel_unlock(chp);
|
|
|
|
mvsata_atapi_done(chp, xfer);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
mvsata_atapi_phase_complete(struct ata_xfer *xfer)
|
|
{
|
|
struct ata_channel *chp = xfer->c_chp;
|
|
struct atac_softc *atac = chp->ch_atac;
|
|
struct wdc_softc *wdc = CHAN_TO_WDC(chp);
|
|
struct scsipi_xfer *sc_xfer = xfer->c_scsipi;
|
|
struct ata_drive_datas *drvp = &chp->ch_drive[xfer->c_drive];
|
|
int tfd = 0;
|
|
|
|
ata_channel_lock_owned(chp);
|
|
|
|
/* wait for DSC if needed */
|
|
if (drvp->drive_flags & ATA_DRIVE_ATAPIDSCW) {
|
|
DPRINTF(DEBUG_XFERS,
|
|
("%s:%d:%d: mvsata_atapi_phase_complete: polldsc %d\n",
|
|
device_xname(atac->atac_dev), chp->ch_channel,
|
|
xfer->c_drive, xfer->c_dscpoll));
|
|
if (cold)
|
|
panic("mvsata_atapi_phase_complete: cold");
|
|
|
|
if (wdcwait(chp, WDCS_DSC, WDCS_DSC, 10, AT_POLL, &tfd) ==
|
|
WDCWAIT_TOUT) {
|
|
/* 10ms not enough, try again in 1 tick */
|
|
if (xfer->c_dscpoll++ > mstohz(sc_xfer->timeout)) {
|
|
aprint_error_dev(atac->atac_dev,
|
|
"channel %d: wait_for_dsc failed\n",
|
|
chp->ch_channel);
|
|
ata_channel_unlock(chp);
|
|
sc_xfer->error = XS_TIMEOUT;
|
|
mvsata_atapi_reset(chp, xfer);
|
|
} else {
|
|
callout_reset(&xfer->c_timo_callout, 1,
|
|
mvsata_atapi_polldsc, xfer);
|
|
ata_channel_unlock(chp);
|
|
}
|
|
return;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Some drive occasionally set WDCS_ERR with
|
|
* "ATA illegal length indication" in the error
|
|
* register. If we read some data the sense is valid
|
|
* anyway, so don't report the error.
|
|
*/
|
|
if (ATACH_ST(tfd) & WDCS_ERR &&
|
|
((sc_xfer->xs_control & XS_CTL_REQSENSE) == 0 ||
|
|
sc_xfer->resid == sc_xfer->datalen)) {
|
|
/* save the short sense */
|
|
sc_xfer->error = XS_SHORTSENSE;
|
|
sc_xfer->sense.atapi_sense = ATACH_ERR(tfd);
|
|
if ((sc_xfer->xs_periph->periph_quirks & PQUIRK_NOSENSE) == 0) {
|
|
/* ask scsipi to send a REQUEST_SENSE */
|
|
sc_xfer->error = XS_BUSY;
|
|
sc_xfer->status = SCSI_CHECK;
|
|
} else
|
|
if (wdc->dma_status & (WDC_DMAST_NOIRQ | WDC_DMAST_ERR)) {
|
|
ata_channel_unlock(chp);
|
|
ata_dmaerr(drvp,
|
|
(xfer->c_flags & C_POLL) ? AT_POLL : 0);
|
|
sc_xfer->error = XS_RESET;
|
|
mvsata_atapi_reset(chp, xfer);
|
|
return;
|
|
}
|
|
}
|
|
if (xfer->c_bcount != 0) {
|
|
DPRINTF(DEBUG_XFERS, ("%s:%d:%d: mvsata_atapi_intr:"
|
|
" bcount value is %d after io\n",
|
|
device_xname(atac->atac_dev), chp->ch_channel,
|
|
xfer->c_drive, xfer->c_bcount));
|
|
}
|
|
#ifdef DIAGNOSTIC
|
|
if (xfer->c_bcount < 0) {
|
|
aprint_error_dev(atac->atac_dev,
|
|
"channel %d drive %d: mvsata_atapi_intr:"
|
|
" warning: bcount value is %d after io\n",
|
|
chp->ch_channel, xfer->c_drive, xfer->c_bcount);
|
|
}
|
|
#endif
|
|
|
|
DPRINTF(DEBUG_XFERS,
|
|
("%s:%d:%d: mvsata_atapi_phase_complete:"
|
|
" mvsata_atapi_done(), error 0x%x sense 0x%x\n",
|
|
device_xname(atac->atac_dev), chp->ch_channel, xfer->c_drive,
|
|
sc_xfer->error, sc_xfer->sense.atapi_sense));
|
|
ata_channel_unlock(chp);
|
|
mvsata_atapi_done(chp, xfer);
|
|
}
|
|
|
|
static void
|
|
mvsata_atapi_done(struct ata_channel *chp, struct ata_xfer *xfer)
|
|
{
|
|
struct mvsata_port *mvport = (struct mvsata_port *)chp;
|
|
struct scsipi_xfer *sc_xfer = xfer->c_scsipi;
|
|
bool iserror = (sc_xfer->error != XS_NOERROR);
|
|
|
|
DPRINTF(DEBUG_FUNCS|DEBUG_XFERS,
|
|
("%s:%d:%d: mvsata_atapi_done: flags 0x%x\n",
|
|
device_xname(chp->ch_atac->atac_dev), chp->ch_channel,
|
|
xfer->c_drive, (u_int)xfer->c_flags));
|
|
|
|
if (ata_waitdrain_xfer_check(chp, xfer))
|
|
return;
|
|
|
|
/* mark controller inactive and free the command */
|
|
mvsata_quetag_put(mvport, xfer->c_slot);
|
|
ata_deactivate_xfer(chp, xfer);
|
|
|
|
ata_free_xfer(chp, xfer);
|
|
|
|
DPRINTF(DEBUG_FUNCS|DEBUG_XFERS,
|
|
("%s:%d: mvsata_atapi_done: scsipi_done\n",
|
|
device_xname(chp->ch_atac->atac_dev), chp->ch_channel));
|
|
scsipi_done(sc_xfer);
|
|
DPRINTF(DEBUG_FUNCS,
|
|
("%s:%d: atastart from wdc_atapi_done, flags 0x%x\n",
|
|
device_xname(chp->ch_atac->atac_dev), chp->ch_channel,
|
|
chp->ch_flags));
|
|
if (!iserror)
|
|
atastart(chp);
|
|
}
|
|
|
|
static void
|
|
mvsata_atapi_polldsc(void *arg)
|
|
{
|
|
struct ata_xfer *xfer = arg;
|
|
struct ata_channel *chp = xfer->c_chp;
|
|
|
|
ata_channel_lock(chp);
|
|
|
|
/* this will unlock channel lock too */
|
|
mvsata_atapi_phase_complete(xfer);
|
|
}
|
|
#endif /* NATAPIBUS > 0 */
|
|
|
|
|
|
/*
|
|
* XXXX: Shall we need lock for race condition in mvsata_edma_enqueue{,_gen2}(),
|
|
* if supported queuing command by atabus? The race condition will not happen
|
|
* if this is called only to the thread of atabus.
|
|
*/
|
|
static int
|
|
mvsata_edma_enqueue(struct mvsata_port *mvport, struct ata_xfer *xfer)
|
|
{
|
|
struct mvsata_softc *sc = device_private(MVSATA_DEV2(mvport));
|
|
struct ata_bio *ata_bio = &xfer->c_bio;
|
|
void *databuf = (uint8_t *)xfer->c_databuf + xfer->c_skip;
|
|
struct eprd *eprd;
|
|
bus_addr_t crqb_base_addr;
|
|
bus_dmamap_t data_dmamap;
|
|
uint32_t reg;
|
|
int erqqip, erqqop, next, rv, i;
|
|
|
|
DPRINTF(DEBUG_FUNCS|DEBUG_XFERS, ("%s:%d:%d: mvsata_edma_enqueue:"
|
|
" blkno=0x%" PRIx64 ", nbytes=%d, flags=0x%x\n",
|
|
device_xname(MVSATA_DEV2(mvport)), mvport->port_hc->hc,
|
|
mvport->port, ata_bio->blkno, ata_bio->nbytes, ata_bio->flags));
|
|
|
|
reg = MVSATA_EDMA_READ_4(mvport, EDMA_REQQOP);
|
|
erqqop = (reg & EDMA_REQQP_ERQQP_MASK) >> EDMA_REQQP_ERQQP_SHIFT;
|
|
reg = MVSATA_EDMA_READ_4(mvport, EDMA_REQQIP);
|
|
erqqip = (reg & EDMA_REQQP_ERQQP_MASK) >> EDMA_REQQP_ERQQP_SHIFT;
|
|
next = erqqip;
|
|
MVSATA_EDMAQ_INC(next);
|
|
if (next == erqqop) {
|
|
/* queue full */
|
|
return EBUSY;
|
|
}
|
|
DPRINTF(DEBUG_XFERS,
|
|
(" erqqip=%d, quetag=%d\n", erqqip, xfer->c_slot));
|
|
|
|
rv = mvsata_dma_bufload(mvport, xfer->c_slot, databuf, ata_bio->nbytes,
|
|
ata_bio->flags);
|
|
if (rv != 0)
|
|
return rv;
|
|
|
|
/* setup EDMA Physical Region Descriptors (ePRD) Table Data */
|
|
data_dmamap = mvport->port_reqtbl[xfer->c_slot].data_dmamap;
|
|
eprd = mvport->port_reqtbl[xfer->c_slot].eprd;
|
|
for (i = 0; i < data_dmamap->dm_nsegs; i++) {
|
|
bus_addr_t ds_addr = data_dmamap->dm_segs[i].ds_addr;
|
|
bus_size_t ds_len = data_dmamap->dm_segs[i].ds_len;
|
|
|
|
eprd->prdbal = htole32(ds_addr & EPRD_PRDBAL_MASK);
|
|
eprd->bytecount = htole32(EPRD_BYTECOUNT(ds_len));
|
|
eprd->eot = htole16(0);
|
|
eprd->prdbah = htole32((ds_addr >> 16) >> 16);
|
|
eprd++;
|
|
}
|
|
(eprd - 1)->eot |= htole16(EPRD_EOT);
|
|
#ifdef MVSATA_DEBUG
|
|
if (mvsata_debug >= 3)
|
|
mvsata_print_eprd(mvport, xfer->c_slot);
|
|
#endif
|
|
bus_dmamap_sync(mvport->port_dmat, mvport->port_eprd_dmamap,
|
|
mvport->port_reqtbl[xfer->c_slot].eprd_offset, MVSATA_EPRD_MAX_SIZE,
|
|
BUS_DMASYNC_PREWRITE);
|
|
|
|
/* setup EDMA Command Request Block (CRQB) Data */
|
|
sc->sc_edma_setup_crqb(mvport, erqqip, xfer);
|
|
#ifdef MVSATA_DEBUG
|
|
if (mvsata_debug >= 3)
|
|
mvsata_print_crqb(mvport, erqqip);
|
|
#endif
|
|
bus_dmamap_sync(mvport->port_dmat, mvport->port_crqb_dmamap,
|
|
erqqip * sizeof(union mvsata_crqb),
|
|
sizeof(union mvsata_crqb), BUS_DMASYNC_PREWRITE);
|
|
|
|
MVSATA_EDMAQ_INC(erqqip);
|
|
|
|
crqb_base_addr = mvport->port_crqb_dmamap->dm_segs[0].ds_addr &
|
|
(EDMA_REQQP_ERQQBAP_MASK | EDMA_REQQP_ERQQBA_MASK);
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_REQQBAH, (crqb_base_addr >> 16) >> 16);
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_REQQIP,
|
|
crqb_base_addr | (erqqip << EDMA_REQQP_ERQQP_SHIFT));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mvsata_edma_handle(struct mvsata_port *mvport, struct ata_xfer *xfer1)
|
|
{
|
|
struct ata_channel *chp = &mvport->port_ata_channel;
|
|
struct crpb *crpb;
|
|
struct ata_bio *ata_bio;
|
|
struct ata_xfer *xfer;
|
|
uint32_t reg;
|
|
int erqqop, erpqip, erpqop, prev_erpqop, quetag, handled = 0, n;
|
|
int st, dmaerr;
|
|
|
|
/* First, Sync for Request Queue buffer */
|
|
reg = MVSATA_EDMA_READ_4(mvport, EDMA_REQQOP);
|
|
erqqop = (reg & EDMA_REQQP_ERQQP_MASK) >> EDMA_REQQP_ERQQP_SHIFT;
|
|
if (mvport->port_prev_erqqop != erqqop) {
|
|
const int s = sizeof(union mvsata_crqb);
|
|
|
|
if (mvport->port_prev_erqqop < erqqop)
|
|
n = erqqop - mvport->port_prev_erqqop;
|
|
else {
|
|
if (erqqop > 0)
|
|
bus_dmamap_sync(mvport->port_dmat,
|
|
mvport->port_crqb_dmamap, 0, erqqop * s,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
n = MVSATA_EDMAQ_LEN - mvport->port_prev_erqqop;
|
|
}
|
|
if (n > 0)
|
|
bus_dmamap_sync(mvport->port_dmat,
|
|
mvport->port_crqb_dmamap,
|
|
mvport->port_prev_erqqop * s, n * s,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
mvport->port_prev_erqqop = erqqop;
|
|
}
|
|
|
|
reg = MVSATA_EDMA_READ_4(mvport, EDMA_RESQIP);
|
|
erpqip = (reg & EDMA_RESQP_ERPQP_MASK) >> EDMA_RESQP_ERPQP_SHIFT;
|
|
reg = MVSATA_EDMA_READ_4(mvport, EDMA_RESQOP);
|
|
erpqop = (reg & EDMA_RESQP_ERPQP_MASK) >> EDMA_RESQP_ERPQP_SHIFT;
|
|
|
|
DPRINTF(DEBUG_XFERS,
|
|
("%s:%d:%d: mvsata_edma_handle: erpqip=%d, erpqop=%d\n",
|
|
device_xname(MVSATA_DEV2(mvport)), mvport->port_hc->hc,
|
|
mvport->port, erpqip, erpqop));
|
|
|
|
if (erpqop == erpqip)
|
|
return 0;
|
|
|
|
if (erpqop < erpqip)
|
|
n = erpqip - erpqop;
|
|
else {
|
|
if (erpqip > 0)
|
|
bus_dmamap_sync(mvport->port_dmat,
|
|
mvport->port_crpb_dmamap,
|
|
0, erpqip * sizeof(struct crpb),
|
|
BUS_DMASYNC_POSTREAD);
|
|
n = MVSATA_EDMAQ_LEN - erpqop;
|
|
}
|
|
if (n > 0)
|
|
bus_dmamap_sync(mvport->port_dmat, mvport->port_crpb_dmamap,
|
|
erpqop * sizeof(struct crpb),
|
|
n * sizeof(struct crpb), BUS_DMASYNC_POSTREAD);
|
|
|
|
prev_erpqop = erpqop;
|
|
while (erpqop != erpqip) {
|
|
#ifdef MVSATA_DEBUG
|
|
if (mvsata_debug >= 3)
|
|
mvsata_print_crpb(mvport, erpqop);
|
|
#endif
|
|
crpb = mvport->port_crpb + erpqop;
|
|
MVSATA_EDMAQ_INC(erpqop);
|
|
|
|
quetag = CRPB_CHOSTQUETAG(le16toh(crpb->id));
|
|
|
|
if ((mvport->port_quetagidx & __BIT(quetag)) == 0) {
|
|
/* not actually executing */
|
|
continue;
|
|
}
|
|
|
|
xfer = ata_queue_hwslot_to_xfer(chp, quetag);
|
|
|
|
bus_dmamap_sync(mvport->port_dmat, mvport->port_eprd_dmamap,
|
|
mvport->port_reqtbl[xfer->c_slot].eprd_offset,
|
|
MVSATA_EPRD_MAX_SIZE, BUS_DMASYNC_POSTWRITE);
|
|
|
|
st = CRPB_CDEVSTS(le16toh(crpb->rspflg));
|
|
dmaerr = CRPB_CEDMASTS(le16toh(crpb->rspflg));
|
|
|
|
ata_bio = &xfer->c_bio;
|
|
ata_bio->error = NOERROR;
|
|
ata_bio->r_error = 0;
|
|
if (st & WDCS_ERR)
|
|
ata_bio->error = ERROR;
|
|
if (st & WDCS_BSY)
|
|
ata_bio->error = TIMEOUT;
|
|
if (dmaerr != 0)
|
|
ata_bio->error = ERR_DMA;
|
|
|
|
mvsata_dma_bufunload(mvport, quetag, ata_bio->flags);
|
|
|
|
mvsata_bio_intr(chp, xfer, 1);
|
|
if (xfer1 == NULL)
|
|
handled++;
|
|
else if (xfer == xfer1) {
|
|
handled = 1;
|
|
break;
|
|
}
|
|
}
|
|
if (prev_erpqop < erpqop)
|
|
n = erpqop - prev_erpqop;
|
|
else {
|
|
if (erpqop > 0)
|
|
bus_dmamap_sync(mvport->port_dmat,
|
|
mvport->port_crpb_dmamap, 0,
|
|
erpqop * sizeof(struct crpb), BUS_DMASYNC_PREREAD);
|
|
n = MVSATA_EDMAQ_LEN - prev_erpqop;
|
|
}
|
|
if (n > 0)
|
|
bus_dmamap_sync(mvport->port_dmat, mvport->port_crpb_dmamap,
|
|
prev_erpqop * sizeof(struct crpb),
|
|
n * sizeof(struct crpb), BUS_DMASYNC_PREREAD);
|
|
|
|
reg &= ~EDMA_RESQP_ERPQP_MASK;
|
|
reg |= (erpqop << EDMA_RESQP_ERPQP_SHIFT);
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_RESQOP, reg);
|
|
|
|
return handled;
|
|
}
|
|
|
|
static int
|
|
mvsata_edma_wait(struct mvsata_port *mvport, struct ata_xfer *xfer, int timeout)
|
|
{
|
|
int xtime;
|
|
|
|
for (xtime = 0; xtime < timeout * 10; xtime++) {
|
|
if (mvsata_edma_handle(mvport, xfer))
|
|
return 0;
|
|
DELAY(100);
|
|
}
|
|
|
|
DPRINTF(DEBUG_FUNCS, ("%s: timeout: %p\n", __func__, xfer));
|
|
mvsata_edma_rqq_remove(mvport, xfer);
|
|
xfer->c_flags |= C_TIMEOU;
|
|
return 1;
|
|
}
|
|
|
|
static void
|
|
mvsata_edma_timeout(void *arg)
|
|
{
|
|
struct ata_xfer *xfer = (struct ata_xfer *)arg;
|
|
struct ata_channel *chp = xfer->c_chp;
|
|
struct mvsata_port *mvport = (struct mvsata_port *)chp;
|
|
int s;
|
|
|
|
s = splbio();
|
|
DPRINTF(DEBUG_FUNCS, ("%s: %p\n", __func__, xfer));
|
|
|
|
if (ata_timo_xfer_check(xfer)) {
|
|
/* Already logged */
|
|
goto out;
|
|
}
|
|
|
|
mvsata_edma_rqq_remove(mvport, xfer);
|
|
xfer->c_flags |= C_TIMEOU;
|
|
mvsata_bio_intr(chp, xfer, 0);
|
|
|
|
out:
|
|
splx(s);
|
|
}
|
|
|
|
static void
|
|
mvsata_edma_rqq_remove(struct mvsata_port *mvport, struct ata_xfer *xfer)
|
|
{
|
|
struct ata_channel *chp = &mvport->port_ata_channel;
|
|
struct mvsata_softc *sc = device_private(MVSATA_DEV2(mvport));
|
|
bus_addr_t crqb_base_addr;
|
|
int erqqip, i;
|
|
|
|
/* First, hardware reset, stop EDMA */
|
|
mvsata_hreset_port(mvport);
|
|
|
|
/* cleanup completed EDMA safely */
|
|
mvsata_edma_handle(mvport, NULL);
|
|
|
|
bus_dmamap_sync(mvport->port_dmat, mvport->port_crqb_dmamap, 0,
|
|
sizeof(union mvsata_crqb) * MVSATA_EDMAQ_LEN, BUS_DMASYNC_PREWRITE);
|
|
|
|
for (i = 0, erqqip = 0; i < MVSATA_EDMAQ_LEN; i++) {
|
|
struct ata_xfer *rqxfer;
|
|
|
|
if ((mvport->port_quetagidx & __BIT(i)) == 0)
|
|
continue;
|
|
|
|
if (i == xfer->c_slot) {
|
|
/* remove xfer from EDMA request queue */
|
|
bus_dmamap_sync(mvport->port_dmat,
|
|
mvport->port_eprd_dmamap,
|
|
mvport->port_reqtbl[i].eprd_offset,
|
|
MVSATA_EPRD_MAX_SIZE, BUS_DMASYNC_POSTWRITE);
|
|
mvsata_dma_bufunload(mvport, i, xfer->c_bio.flags);
|
|
/* quetag freed by caller later */
|
|
continue;
|
|
}
|
|
|
|
rqxfer = ata_queue_hwslot_to_xfer(chp, i);
|
|
sc->sc_edma_setup_crqb(mvport, erqqip, rqxfer);
|
|
erqqip++;
|
|
}
|
|
bus_dmamap_sync(mvport->port_dmat, mvport->port_crqb_dmamap, 0,
|
|
sizeof(union mvsata_crqb) * MVSATA_EDMAQ_LEN,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
|
|
mvsata_edma_config(mvport, mvport->port_edmamode_curr);
|
|
mvsata_edma_reset_qptr(mvport);
|
|
mvsata_edma_enable(mvport);
|
|
|
|
crqb_base_addr = mvport->port_crqb_dmamap->dm_segs[0].ds_addr &
|
|
(EDMA_REQQP_ERQQBAP_MASK | EDMA_REQQP_ERQQBA_MASK);
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_REQQBAH, (crqb_base_addr >> 16) >> 16);
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_REQQIP,
|
|
crqb_base_addr | (erqqip << EDMA_REQQP_ERQQP_SHIFT));
|
|
}
|
|
|
|
#if NATAPIBUS > 0
|
|
static int
|
|
mvsata_bdma_init(struct mvsata_port *mvport, struct ata_xfer *xfer)
|
|
{
|
|
struct scsipi_xfer *sc_xfer = xfer->c_scsipi;
|
|
struct eprd *eprd;
|
|
bus_dmamap_t data_dmamap;
|
|
bus_addr_t eprd_addr;
|
|
int i, rv;
|
|
void *databuf = (uint8_t *)xfer->c_databuf + xfer->c_skip;
|
|
|
|
DPRINTF(DEBUG_FUNCS|DEBUG_XFERS,
|
|
("%s:%d:%d: mvsata_bdma_init: datalen=%d, xs_control=0x%x\n",
|
|
device_xname(MVSATA_DEV2(mvport)), mvport->port_hc->hc,
|
|
mvport->port, sc_xfer->datalen, sc_xfer->xs_control));
|
|
|
|
rv = mvsata_dma_bufload(mvport, xfer->c_slot, databuf,
|
|
sc_xfer->datalen,
|
|
sc_xfer->xs_control & XS_CTL_DATA_IN ? ATA_READ : 0);
|
|
if (rv != 0)
|
|
return rv;
|
|
|
|
/* setup EDMA Physical Region Descriptors (ePRD) Table Data */
|
|
data_dmamap = mvport->port_reqtbl[xfer->c_slot].data_dmamap;
|
|
eprd = mvport->port_reqtbl[xfer->c_slot].eprd;
|
|
for (i = 0; i < data_dmamap->dm_nsegs; i++) {
|
|
bus_addr_t ds_addr = data_dmamap->dm_segs[i].ds_addr;
|
|
bus_size_t ds_len = data_dmamap->dm_segs[i].ds_len;
|
|
|
|
eprd->prdbal = htole32(ds_addr & EPRD_PRDBAL_MASK);
|
|
eprd->bytecount = htole32(EPRD_BYTECOUNT(ds_len));
|
|
eprd->eot = htole16(0);
|
|
eprd->prdbah = htole32((ds_addr >> 16) >> 16);
|
|
eprd++;
|
|
}
|
|
(eprd - 1)->eot |= htole16(EPRD_EOT);
|
|
#ifdef MVSATA_DEBUG
|
|
if (mvsata_debug >= 3)
|
|
mvsata_print_eprd(mvport, xfer->c_slot);
|
|
#endif
|
|
bus_dmamap_sync(mvport->port_dmat, mvport->port_eprd_dmamap,
|
|
mvport->port_reqtbl[xfer->c_slot].eprd_offset,
|
|
MVSATA_EPRD_MAX_SIZE, BUS_DMASYNC_PREWRITE);
|
|
eprd_addr = mvport->port_eprd_dmamap->dm_segs[0].ds_addr +
|
|
mvport->port_reqtbl[xfer->c_slot].eprd_offset;
|
|
|
|
MVSATA_EDMA_WRITE_4(mvport, DMA_DTLBA, eprd_addr & DMA_DTLBA_MASK);
|
|
MVSATA_EDMA_WRITE_4(mvport, DMA_DTHBA, (eprd_addr >> 16) >> 16);
|
|
|
|
if (sc_xfer->xs_control & XS_CTL_DATA_IN)
|
|
MVSATA_EDMA_WRITE_4(mvport, DMA_C, DMA_C_READ);
|
|
else
|
|
MVSATA_EDMA_WRITE_4(mvport, DMA_C, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
mvsata_bdma_start(struct mvsata_port *mvport)
|
|
{
|
|
|
|
#ifdef MVSATA_DEBUG
|
|
if (mvsata_debug >= 3)
|
|
mvsata_print_eprd(mvport, 0);
|
|
#endif
|
|
|
|
MVSATA_EDMA_WRITE_4(mvport, DMA_C,
|
|
MVSATA_EDMA_READ_4(mvport, DMA_C) | DMA_C_START);
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
|
|
static int
|
|
mvsata_port_init(struct mvsata_hc *mvhc, int port)
|
|
{
|
|
struct mvsata_softc *sc = mvhc->hc_sc;
|
|
struct mvsata_port *mvport;
|
|
struct ata_channel *chp;
|
|
int channel, rv, i;
|
|
const int crqbq_size = sizeof(union mvsata_crqb) * MVSATA_EDMAQ_LEN;
|
|
const int crpbq_size = sizeof(struct crpb) * MVSATA_EDMAQ_LEN;
|
|
const int eprd_buf_size = MVSATA_EPRD_MAX_SIZE * MVSATA_EDMAQ_LEN;
|
|
|
|
mvport = malloc(sizeof(struct mvsata_port), M_DEVBUF,
|
|
M_ZERO | M_NOWAIT);
|
|
if (mvport == NULL) {
|
|
aprint_error("%s:%d: can't allocate memory for port %d\n",
|
|
device_xname(MVSATA_DEV(sc)), mvhc->hc, port);
|
|
return ENOMEM;
|
|
}
|
|
|
|
mvport->port = port;
|
|
mvport->port_hc = mvhc;
|
|
mvport->port_edmamode_negotiated = nodma;
|
|
|
|
rv = bus_space_subregion(mvhc->hc_iot, mvhc->hc_ioh,
|
|
EDMA_REGISTERS_OFFSET + port * EDMA_REGISTERS_SIZE,
|
|
EDMA_REGISTERS_SIZE, &mvport->port_ioh);
|
|
if (rv != 0) {
|
|
aprint_error("%s:%d: can't subregion EDMA %d registers\n",
|
|
device_xname(MVSATA_DEV(sc)), mvhc->hc, port);
|
|
goto fail0;
|
|
}
|
|
mvport->port_iot = mvhc->hc_iot;
|
|
rv = bus_space_subregion(mvport->port_iot, mvport->port_ioh, SATA_SS, 4,
|
|
&mvport->port_sata_sstatus);
|
|
if (rv != 0) {
|
|
aprint_error("%s:%d:%d: couldn't subregion sstatus regs\n",
|
|
device_xname(MVSATA_DEV(sc)), mvhc->hc, port);
|
|
goto fail0;
|
|
}
|
|
rv = bus_space_subregion(mvport->port_iot, mvport->port_ioh, SATA_SE, 4,
|
|
&mvport->port_sata_serror);
|
|
if (rv != 0) {
|
|
aprint_error("%s:%d:%d: couldn't subregion serror regs\n",
|
|
device_xname(MVSATA_DEV(sc)), mvhc->hc, port);
|
|
goto fail0;
|
|
}
|
|
if (sc->sc_rev == gen1)
|
|
rv = bus_space_subregion(mvhc->hc_iot, mvhc->hc_ioh,
|
|
SATAHC_I_R02(port), 4, &mvport->port_sata_scontrol);
|
|
else
|
|
rv = bus_space_subregion(mvport->port_iot, mvport->port_ioh,
|
|
SATA_SC, 4, &mvport->port_sata_scontrol);
|
|
if (rv != 0) {
|
|
aprint_error("%s:%d:%d: couldn't subregion scontrol regs\n",
|
|
device_xname(MVSATA_DEV(sc)), mvhc->hc, port);
|
|
goto fail0;
|
|
}
|
|
mvport->port_dmat = sc->sc_dmat;
|
|
mvhc->hc_ports[port] = mvport;
|
|
|
|
channel = mvhc->hc * sc->sc_port + port;
|
|
chp = &mvport->port_ata_channel;
|
|
chp->ch_channel = channel;
|
|
chp->ch_atac = &sc->sc_wdcdev.sc_atac;
|
|
chp->ch_queue = ata_queue_alloc(MVSATA_EDMAQ_LEN);
|
|
sc->sc_ata_channels[channel] = chp;
|
|
|
|
rv = mvsata_wdc_reg_init(mvport, sc->sc_wdcdev.regs + channel);
|
|
if (rv != 0)
|
|
goto fail0;
|
|
|
|
rv = bus_dmamap_create(mvport->port_dmat, crqbq_size, 1, crqbq_size, 0,
|
|
BUS_DMA_NOWAIT, &mvport->port_crqb_dmamap);
|
|
if (rv != 0) {
|
|
aprint_error(
|
|
"%s:%d:%d: EDMA CRQB map create failed: error=%d\n",
|
|
device_xname(MVSATA_DEV(sc)), mvhc->hc, port, rv);
|
|
goto fail0;
|
|
}
|
|
rv = bus_dmamap_create(mvport->port_dmat, crpbq_size, 1, crpbq_size, 0,
|
|
BUS_DMA_NOWAIT, &mvport->port_crpb_dmamap);
|
|
if (rv != 0) {
|
|
aprint_error(
|
|
"%s:%d:%d: EDMA CRPB map create failed: error=%d\n",
|
|
device_xname(MVSATA_DEV(sc)), mvhc->hc, port, rv);
|
|
goto fail1;
|
|
}
|
|
rv = bus_dmamap_create(mvport->port_dmat, eprd_buf_size, 1,
|
|
eprd_buf_size, 0, BUS_DMA_NOWAIT, &mvport->port_eprd_dmamap);
|
|
if (rv != 0) {
|
|
aprint_error(
|
|
"%s:%d:%d: EDMA ePRD buffer map create failed: error=%d\n",
|
|
device_xname(MVSATA_DEV(sc)), mvhc->hc, port, rv);
|
|
goto fail2;
|
|
}
|
|
for (i = 0; i < MVSATA_EDMAQ_LEN; i++) {
|
|
rv = bus_dmamap_create(mvport->port_dmat, MAXPHYS,
|
|
MAXPHYS / PAGE_SIZE, MAXPHYS, 0, BUS_DMA_NOWAIT,
|
|
&mvport->port_reqtbl[i].data_dmamap);
|
|
if (rv != 0) {
|
|
aprint_error("%s:%d:%d:"
|
|
" EDMA data map(%d) create failed: error=%d\n",
|
|
device_xname(MVSATA_DEV(sc)), mvhc->hc, port, i,
|
|
rv);
|
|
goto fail3;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail3:
|
|
for (i--; i >= 0; i--)
|
|
bus_dmamap_destroy(mvport->port_dmat,
|
|
mvport->port_reqtbl[i].data_dmamap);
|
|
bus_dmamap_destroy(mvport->port_dmat, mvport->port_eprd_dmamap);
|
|
fail2:
|
|
bus_dmamap_destroy(mvport->port_dmat, mvport->port_crpb_dmamap);
|
|
fail1:
|
|
bus_dmamap_destroy(mvport->port_dmat, mvport->port_crqb_dmamap);
|
|
fail0:
|
|
return rv;
|
|
}
|
|
|
|
static int
|
|
mvsata_wdc_reg_init(struct mvsata_port *mvport, struct wdc_regs *wdr)
|
|
{
|
|
int hc, port, rv, i;
|
|
|
|
hc = mvport->port_hc->hc;
|
|
port = mvport->port;
|
|
|
|
/* Create subregion for Shadow Registers Map */
|
|
rv = bus_space_subregion(mvport->port_iot, mvport->port_ioh,
|
|
SHADOW_REG_BLOCK_OFFSET, SHADOW_REG_BLOCK_SIZE, &wdr->cmd_baseioh);
|
|
if (rv != 0) {
|
|
aprint_error("%s:%d:%d: couldn't subregion shadow block regs\n",
|
|
device_xname(MVSATA_DEV2(mvport)), hc, port);
|
|
return rv;
|
|
}
|
|
wdr->cmd_iot = mvport->port_iot;
|
|
|
|
/* Once create subregion for each command registers */
|
|
for (i = 0; i < WDC_NREG; i++) {
|
|
rv = bus_space_subregion(wdr->cmd_iot, wdr->cmd_baseioh,
|
|
i * 4, sizeof(uint32_t), &wdr->cmd_iohs[i]);
|
|
if (rv != 0) {
|
|
aprint_error("%s:%d:%d: couldn't subregion cmd regs\n",
|
|
device_xname(MVSATA_DEV2(mvport)), hc, port);
|
|
return rv;
|
|
}
|
|
}
|
|
/* Create subregion for Alternate Status register */
|
|
rv = bus_space_subregion(wdr->cmd_iot, wdr->cmd_baseioh,
|
|
i * 4, sizeof(uint32_t), &wdr->ctl_ioh);
|
|
if (rv != 0) {
|
|
aprint_error("%s:%d:%d: couldn't subregion cmd regs\n",
|
|
device_xname(MVSATA_DEV2(mvport)), hc, port);
|
|
return rv;
|
|
}
|
|
wdr->ctl_iot = mvport->port_iot;
|
|
|
|
wdc_init_shadow_regs(wdr);
|
|
|
|
rv = bus_space_subregion(mvport->port_iot, mvport->port_ioh,
|
|
SATA_SS, sizeof(uint32_t) * 3, &wdr->sata_baseioh);
|
|
if (rv != 0) {
|
|
aprint_error("%s:%d:%d: couldn't subregion SATA regs\n",
|
|
device_xname(MVSATA_DEV2(mvport)), hc, port);
|
|
return rv;
|
|
}
|
|
wdr->sata_iot = mvport->port_iot;
|
|
rv = bus_space_subregion(mvport->port_iot, mvport->port_ioh,
|
|
SATA_SC, sizeof(uint32_t), &wdr->sata_control);
|
|
if (rv != 0) {
|
|
aprint_error("%s:%d:%d: couldn't subregion SControl\n",
|
|
device_xname(MVSATA_DEV2(mvport)), hc, port);
|
|
return rv;
|
|
}
|
|
rv = bus_space_subregion(mvport->port_iot, mvport->port_ioh,
|
|
SATA_SS, sizeof(uint32_t), &wdr->sata_status);
|
|
if (rv != 0) {
|
|
aprint_error("%s:%d:%d: couldn't subregion SStatus\n",
|
|
device_xname(MVSATA_DEV2(mvport)), hc, port);
|
|
return rv;
|
|
}
|
|
rv = bus_space_subregion(mvport->port_iot, mvport->port_ioh,
|
|
SATA_SE, sizeof(uint32_t), &wdr->sata_error);
|
|
if (rv != 0) {
|
|
aprint_error("%s:%d:%d: couldn't subregion SError\n",
|
|
device_xname(MVSATA_DEV2(mvport)), hc, port);
|
|
return rv;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
#ifndef MVSATA_WITHOUTDMA
|
|
/*
|
|
* There are functions to remember Host Queue Tag.
|
|
*/
|
|
|
|
static inline void
|
|
mvsata_quetag_get(struct mvsata_port *mvport, uint8_t quetag)
|
|
{
|
|
KASSERT(quetag <= 32);
|
|
|
|
/*
|
|
* Do not check whether it's already set, can happen when
|
|
* postponing bio or atapi xfer to thread.
|
|
*/
|
|
mvport->port_quetagidx |= __BIT(quetag);
|
|
}
|
|
|
|
static inline void
|
|
mvsata_quetag_put(struct mvsata_port *mvport, uint8_t quetag)
|
|
{
|
|
KASSERT(quetag <= 32);
|
|
KASSERT((mvport->port_quetagidx & __BIT(quetag)) != 0);
|
|
mvport->port_quetagidx &= ~__BIT(quetag);
|
|
}
|
|
|
|
static void *
|
|
mvsata_edma_resource_prepare(struct mvsata_port *mvport, bus_dma_tag_t dmat,
|
|
bus_dmamap_t *dmamap, size_t size, int write)
|
|
{
|
|
bus_dma_segment_t seg;
|
|
int nseg, rv;
|
|
void *kva;
|
|
|
|
rv = bus_dmamem_alloc(dmat, size, PAGE_SIZE, 0, &seg, 1, &nseg,
|
|
BUS_DMA_NOWAIT);
|
|
if (rv != 0) {
|
|
aprint_error("%s:%d:%d: DMA memory alloc failed: error=%d\n",
|
|
device_xname(MVSATA_DEV2(mvport)),
|
|
mvport->port_hc->hc, mvport->port, rv);
|
|
goto fail;
|
|
}
|
|
|
|
rv = bus_dmamem_map(dmat, &seg, nseg, size, &kva, BUS_DMA_NOWAIT);
|
|
if (rv != 0) {
|
|
aprint_error("%s:%d:%d: DMA memory map failed: error=%d\n",
|
|
device_xname(MVSATA_DEV2(mvport)),
|
|
mvport->port_hc->hc, mvport->port, rv);
|
|
goto free;
|
|
}
|
|
|
|
rv = bus_dmamap_load(dmat, *dmamap, kva, size, NULL,
|
|
BUS_DMA_NOWAIT | (write ? BUS_DMA_WRITE : BUS_DMA_READ));
|
|
if (rv != 0) {
|
|
aprint_error("%s:%d:%d: DMA map load failed: error=%d\n",
|
|
device_xname(MVSATA_DEV2(mvport)),
|
|
mvport->port_hc->hc, mvport->port, rv);
|
|
goto unmap;
|
|
}
|
|
|
|
if (!write)
|
|
bus_dmamap_sync(dmat, *dmamap, 0, size, BUS_DMASYNC_PREREAD);
|
|
|
|
return kva;
|
|
|
|
unmap:
|
|
bus_dmamem_unmap(dmat, kva, size);
|
|
free:
|
|
bus_dmamem_free(dmat, &seg, nseg);
|
|
fail:
|
|
return NULL;
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
static void
|
|
mvsata_edma_resource_purge(struct mvsata_port *mvport, bus_dma_tag_t dmat,
|
|
bus_dmamap_t dmamap, void *kva)
|
|
{
|
|
|
|
bus_dmamap_unload(dmat, dmamap);
|
|
bus_dmamem_unmap(dmat, kva, dmamap->dm_mapsize);
|
|
bus_dmamem_free(dmat, dmamap->dm_segs, dmamap->dm_nsegs);
|
|
}
|
|
|
|
static int
|
|
mvsata_dma_bufload(struct mvsata_port *mvport, int index, void *databuf,
|
|
size_t datalen, int flags)
|
|
{
|
|
int rv, lop, sop;
|
|
bus_dmamap_t data_dmamap = mvport->port_reqtbl[index].data_dmamap;
|
|
|
|
lop = (flags & ATA_READ) ? BUS_DMA_READ : BUS_DMA_WRITE;
|
|
sop = (flags & ATA_READ) ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE;
|
|
|
|
rv = bus_dmamap_load(mvport->port_dmat, data_dmamap, databuf, datalen,
|
|
NULL, BUS_DMA_NOWAIT | lop);
|
|
if (rv) {
|
|
aprint_error("%s:%d:%d: buffer load failed: error=%d",
|
|
device_xname(MVSATA_DEV2(mvport)), mvport->port_hc->hc,
|
|
mvport->port, rv);
|
|
return rv;
|
|
}
|
|
bus_dmamap_sync(mvport->port_dmat, data_dmamap, 0,
|
|
data_dmamap->dm_mapsize, sop);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline void
|
|
mvsata_dma_bufunload(struct mvsata_port *mvport, int index, int flags)
|
|
{
|
|
bus_dmamap_t data_dmamap = mvport->port_reqtbl[index].data_dmamap;
|
|
|
|
bus_dmamap_sync(mvport->port_dmat, data_dmamap, 0,
|
|
data_dmamap->dm_mapsize,
|
|
(flags & ATA_READ) ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(mvport->port_dmat, data_dmamap);
|
|
}
|
|
#endif
|
|
|
|
static void
|
|
mvsata_hreset_port(struct mvsata_port *mvport)
|
|
{
|
|
struct mvsata_softc *sc = device_private(MVSATA_DEV2(mvport));
|
|
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_CMD, EDMA_CMD_EATARST);
|
|
|
|
delay(25); /* allow reset propagation */
|
|
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_CMD, 0);
|
|
|
|
mvport->_fix_phy_param._fix_phy(mvport);
|
|
|
|
if (sc->sc_gen == gen1)
|
|
delay(1000);
|
|
}
|
|
|
|
static void
|
|
mvsata_reset_port(struct mvsata_port *mvport)
|
|
{
|
|
device_t parent = device_parent(MVSATA_DEV2(mvport));
|
|
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_CMD, EDMA_CMD_EDSEDMA);
|
|
|
|
mvsata_hreset_port(mvport);
|
|
|
|
if (device_is_a(parent, "pci"))
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_CFG,
|
|
EDMA_CFG_RESERVED | EDMA_CFG_ERDBSZ);
|
|
else /* SoC */
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_CFG,
|
|
EDMA_CFG_RESERVED | EDMA_CFG_RESERVED2);
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_T, 0);
|
|
MVSATA_EDMA_WRITE_4(mvport, SATA_SEIM, 0x019c0000);
|
|
MVSATA_EDMA_WRITE_4(mvport, SATA_SE, ~0);
|
|
MVSATA_EDMA_WRITE_4(mvport, SATA_FISIC, 0);
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_IEC, 0);
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_IEM, 0);
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_REQQBAH, 0);
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_REQQIP, 0);
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_REQQOP, 0);
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_RESQBAH, 0);
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_RESQIP, 0);
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_RESQOP, 0);
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_CMD, 0);
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_TC, 0);
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_IORT, 0xbc);
|
|
}
|
|
|
|
static void
|
|
mvsata_reset_hc(struct mvsata_hc *mvhc)
|
|
{
|
|
#if 0
|
|
uint32_t val;
|
|
#endif
|
|
|
|
MVSATA_HC_WRITE_4(mvhc, SATAHC_ICT, 0);
|
|
MVSATA_HC_WRITE_4(mvhc, SATAHC_ITT, 0);
|
|
MVSATA_HC_WRITE_4(mvhc, SATAHC_IC, 0);
|
|
|
|
#if 0 /* XXXX needs? */
|
|
MVSATA_HC_WRITE_4(mvhc, 0x01c, 0);
|
|
|
|
/*
|
|
* Keep the SS during power on and the reference clock bits (reset
|
|
* sample)
|
|
*/
|
|
val = MVSATA_HC_READ_4(mvhc, 0x020);
|
|
val &= 0x1c1c1c1c;
|
|
val |= 0x03030303;
|
|
MVSATA_HC_READ_4(mvhc, 0x020, 0);
|
|
#endif
|
|
}
|
|
|
|
static uint32_t
|
|
mvsata_softreset(struct mvsata_port *mvport, int flags)
|
|
{
|
|
struct ata_channel *chp = &mvport->port_ata_channel;
|
|
uint32_t sig0 = ~0;
|
|
int timeout;
|
|
uint8_t st0;
|
|
|
|
ata_channel_lock_owned(chp);
|
|
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_CAS, WDCTL_RST | WDCTL_IDS | WDCTL_4BIT);
|
|
delay(10);
|
|
(void) MVSATA_WDC_READ_1(mvport, SRB_FE);
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_CAS, WDCTL_IDS | WDCTL_4BIT);
|
|
delay(10);
|
|
|
|
/* wait for BSY to deassert */
|
|
for (timeout = 0; timeout < WDC_RESET_WAIT / 10; timeout++) {
|
|
st0 = MVSATA_WDC_READ_1(mvport, SRB_CS);
|
|
|
|
if ((st0 & WDCS_BSY) == 0) {
|
|
sig0 = MVSATA_WDC_READ_1(mvport, SRB_SC) << 0;
|
|
sig0 |= MVSATA_WDC_READ_1(mvport, SRB_LBAL) << 8;
|
|
sig0 |= MVSATA_WDC_READ_1(mvport, SRB_LBAM) << 16;
|
|
sig0 |= MVSATA_WDC_READ_1(mvport, SRB_LBAH) << 24;
|
|
goto out;
|
|
}
|
|
ata_delay(chp, 10, "atarst", flags);
|
|
}
|
|
|
|
aprint_error("%s:%d:%d: %s: timeout\n",
|
|
device_xname(MVSATA_DEV2(mvport)),
|
|
mvport->port_hc->hc, mvport->port, __func__);
|
|
|
|
out:
|
|
MVSATA_WDC_WRITE_1(mvport, SRB_CAS, WDCTL_4BIT);
|
|
return sig0;
|
|
}
|
|
|
|
#ifndef MVSATA_WITHOUTDMA
|
|
static void
|
|
mvsata_edma_reset_qptr(struct mvsata_port *mvport)
|
|
{
|
|
const bus_addr_t crpb_addr =
|
|
mvport->port_crpb_dmamap->dm_segs[0].ds_addr;
|
|
const uint32_t crpb_addr_mask =
|
|
EDMA_RESQP_ERPQBAP_MASK | EDMA_RESQP_ERPQBA_MASK;
|
|
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_REQQBAH, 0);
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_REQQIP, 0);
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_REQQOP, 0);
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_RESQBAH, (crpb_addr >> 16) >> 16);
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_RESQIP, 0);
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_RESQOP, (crpb_addr & crpb_addr_mask));
|
|
}
|
|
|
|
static inline void
|
|
mvsata_edma_enable(struct mvsata_port *mvport)
|
|
{
|
|
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_CMD, EDMA_CMD_EENEDMA);
|
|
}
|
|
|
|
static int
|
|
mvsata_edma_disable(struct mvsata_port *mvport, int timeout, int wflags)
|
|
{
|
|
struct ata_channel *chp = &mvport->port_ata_channel;
|
|
uint32_t status, command;
|
|
uint32_t idlestatus = EDMA_S_EDMAIDLE | EDMA_S_ECACHEEMPTY;
|
|
int t;
|
|
|
|
if (MVSATA_EDMA_READ_4(mvport, EDMA_CMD) & EDMA_CMD_EENEDMA) {
|
|
|
|
timeout = mstohz(timeout + hztoms(1) - 1);
|
|
|
|
for (t = 0; ; ++t) {
|
|
status = MVSATA_EDMA_READ_4(mvport, EDMA_S);
|
|
if ((status & idlestatus) == idlestatus)
|
|
break;
|
|
if (t >= timeout)
|
|
break;
|
|
ata_delay(chp, hztoms(1), "mvsata_edma1", wflags);
|
|
}
|
|
if (t >= timeout) {
|
|
aprint_error("%s:%d:%d: unable to stop EDMA\n",
|
|
device_xname(MVSATA_DEV2(mvport)),
|
|
mvport->port_hc->hc, mvport->port);
|
|
return EBUSY;
|
|
}
|
|
|
|
/* The disable bit (eDsEDMA) is self negated. */
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_CMD, EDMA_CMD_EDSEDMA);
|
|
|
|
for (t = 0; ; ++t) {
|
|
command = MVSATA_EDMA_READ_4(mvport, EDMA_CMD);
|
|
if (!(command & EDMA_CMD_EENEDMA))
|
|
break;
|
|
if (t >= timeout)
|
|
break;
|
|
ata_delay(chp, hztoms(1), "mvsata_edma2", wflags);
|
|
}
|
|
if (t >= timeout) {
|
|
aprint_error("%s:%d:%d: unable to re-enable EDMA\n",
|
|
device_xname(MVSATA_DEV2(mvport)),
|
|
mvport->port_hc->hc, mvport->port);
|
|
return EBUSY;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set EDMA registers according to mode.
|
|
* ex. NCQ/TCQ(queued)/non queued.
|
|
*/
|
|
static void
|
|
mvsata_edma_config(struct mvsata_port *mvport, enum mvsata_edmamode mode)
|
|
{
|
|
struct mvsata_softc *sc = device_private(MVSATA_DEV2(mvport));
|
|
uint32_t reg;
|
|
|
|
reg = MVSATA_EDMA_READ_4(mvport, EDMA_CFG);
|
|
reg |= EDMA_CFG_RESERVED;
|
|
|
|
if (mode == ncq) {
|
|
if (sc->sc_gen == gen1) {
|
|
aprint_error_dev(MVSATA_DEV2(mvport),
|
|
"GenI not support NCQ\n");
|
|
return;
|
|
} else if (sc->sc_gen == gen2)
|
|
reg |= EDMA_CFG_EDEVERR;
|
|
reg |= EDMA_CFG_ESATANATVCMDQUE;
|
|
} else if (mode == queued) {
|
|
reg &= ~EDMA_CFG_ESATANATVCMDQUE;
|
|
reg |= EDMA_CFG_EQUE;
|
|
} else
|
|
reg &= ~(EDMA_CFG_ESATANATVCMDQUE | EDMA_CFG_EQUE);
|
|
|
|
if (sc->sc_gen == gen1)
|
|
reg |= EDMA_CFG_ERDBSZ;
|
|
else if (sc->sc_gen == gen2)
|
|
reg |= (EDMA_CFG_ERDBSZEXT | EDMA_CFG_EWRBUFFERLEN);
|
|
else if (sc->sc_gen == gen2e) {
|
|
device_t parent = device_parent(MVSATA_DEV(sc));
|
|
|
|
reg |= (EDMA_CFG_EMASKRXPM | EDMA_CFG_EHOSTQUEUECACHEEN);
|
|
reg &= ~(EDMA_CFG_EEDMAFBS | EDMA_CFG_EEDMAQUELEN);
|
|
|
|
if (device_is_a(parent, "pci"))
|
|
reg |= (
|
|
#if NATAPIBUS > 0
|
|
EDMA_CFG_EEARLYCOMPLETIONEN |
|
|
#endif
|
|
EDMA_CFG_ECUTTHROUGHEN |
|
|
EDMA_CFG_EWRBUFFERLEN |
|
|
EDMA_CFG_ERDBSZEXT);
|
|
}
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_CFG, reg);
|
|
|
|
reg = (
|
|
EDMA_IE_EIORDYERR |
|
|
EDMA_IE_ETRANSINT |
|
|
EDMA_IE_EDEVCON |
|
|
EDMA_IE_EDEVDIS);
|
|
if (sc->sc_gen != gen1)
|
|
reg |= (
|
|
EDMA_IE_TRANSPROTERR |
|
|
EDMA_IE_LINKDATATXERR(EDMA_IE_LINKTXERR_FISTXABORTED) |
|
|
EDMA_IE_LINKDATATXERR(EDMA_IE_LINKXERR_OTHERERRORS) |
|
|
EDMA_IE_LINKDATATXERR(EDMA_IE_LINKXERR_LINKLAYERRESET) |
|
|
EDMA_IE_LINKDATATXERR(EDMA_IE_LINKXERR_INTERNALFIFO) |
|
|
EDMA_IE_LINKDATATXERR(EDMA_IE_LINKXERR_SATACRC) |
|
|
EDMA_IE_LINKCTLTXERR(EDMA_IE_LINKXERR_OTHERERRORS) |
|
|
EDMA_IE_LINKCTLTXERR(EDMA_IE_LINKXERR_LINKLAYERRESET) |
|
|
EDMA_IE_LINKCTLTXERR(EDMA_IE_LINKXERR_INTERNALFIFO) |
|
|
EDMA_IE_LINKDATARXERR(EDMA_IE_LINKXERR_OTHERERRORS) |
|
|
EDMA_IE_LINKDATARXERR(EDMA_IE_LINKXERR_LINKLAYERRESET) |
|
|
EDMA_IE_LINKDATARXERR(EDMA_IE_LINKXERR_INTERNALFIFO) |
|
|
EDMA_IE_LINKDATARXERR(EDMA_IE_LINKXERR_SATACRC) |
|
|
EDMA_IE_LINKCTLRXERR(EDMA_IE_LINKXERR_OTHERERRORS) |
|
|
EDMA_IE_LINKCTLRXERR(EDMA_IE_LINKXERR_LINKLAYERRESET) |
|
|
EDMA_IE_LINKCTLRXERR(EDMA_IE_LINKXERR_INTERNALFIFO) |
|
|
EDMA_IE_LINKCTLRXERR(EDMA_IE_LINKXERR_SATACRC) |
|
|
EDMA_IE_ESELFDIS);
|
|
|
|
if (mode == ncq)
|
|
reg |= EDMA_IE_EDEVERR;
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_IEM, reg);
|
|
reg = MVSATA_EDMA_READ_4(mvport, EDMA_HC);
|
|
reg &= ~EDMA_IE_EDEVERR;
|
|
if (mode != ncq)
|
|
reg |= EDMA_IE_EDEVERR;
|
|
MVSATA_EDMA_WRITE_4(mvport, EDMA_HC, reg);
|
|
if (sc->sc_gen == gen2e) {
|
|
/*
|
|
* Clear FISWait4HostRdyEn[0] and [2].
|
|
* [0]: Device to Host FIS with <ERR> or <DF> bit set to 1.
|
|
* [2]: SDB FIS is received with <ERR> bit set to 1.
|
|
*/
|
|
reg = MVSATA_EDMA_READ_4(mvport, SATA_FISC);
|
|
reg &= ~(SATA_FISC_FISWAIT4HOSTRDYEN_B0 |
|
|
SATA_FISC_FISWAIT4HOSTRDYEN_B2);
|
|
MVSATA_EDMA_WRITE_4(mvport, SATA_FISC, reg);
|
|
}
|
|
|
|
mvport->port_edmamode_curr = mode;
|
|
}
|
|
|
|
|
|
/*
|
|
* Generation dependent functions
|
|
*/
|
|
|
|
static void
|
|
mvsata_edma_setup_crqb(struct mvsata_port *mvport, int erqqip,
|
|
struct ata_xfer *xfer)
|
|
{
|
|
struct crqb *crqb;
|
|
bus_addr_t eprd_addr;
|
|
daddr_t blkno;
|
|
uint32_t rw;
|
|
uint8_t cmd, head;
|
|
int i;
|
|
struct ata_bio *ata_bio = &xfer->c_bio;
|
|
|
|
eprd_addr = mvport->port_eprd_dmamap->dm_segs[0].ds_addr +
|
|
mvport->port_reqtbl[xfer->c_slot].eprd_offset;
|
|
rw = (ata_bio->flags & ATA_READ) ? CRQB_CDIR_READ : CRQB_CDIR_WRITE;
|
|
cmd = (ata_bio->flags & ATA_READ) ? WDCC_READDMA : WDCC_WRITEDMA;
|
|
if (ata_bio->flags & (ATA_LBA|ATA_LBA48)) {
|
|
head = WDSD_LBA;
|
|
} else {
|
|
head = 0;
|
|
}
|
|
blkno = ata_bio->blkno;
|
|
if (ata_bio->flags & ATA_LBA48)
|
|
cmd = atacmd_to48(cmd);
|
|
else {
|
|
head |= ((ata_bio->blkno >> 24) & 0xf);
|
|
blkno &= 0xffffff;
|
|
}
|
|
crqb = &mvport->port_crqb->crqb + erqqip;
|
|
crqb->cprdbl = htole32(eprd_addr & CRQB_CRQBL_EPRD_MASK);
|
|
crqb->cprdbh = htole32((eprd_addr >> 16) >> 16);
|
|
crqb->ctrlflg =
|
|
htole16(rw | CRQB_CHOSTQUETAG(xfer->c_slot) |
|
|
CRQB_CPMPORT(xfer->c_drive));
|
|
i = 0;
|
|
if (mvport->port_edmamode_curr == dma) {
|
|
if (ata_bio->flags & ATA_LBA48)
|
|
crqb->atacommand[i++] = htole16(CRQB_ATACOMMAND(
|
|
CRQB_ATACOMMAND_SECTORCOUNT, ata_bio->nblks >> 8));
|
|
crqb->atacommand[i++] = htole16(CRQB_ATACOMMAND(
|
|
CRQB_ATACOMMAND_SECTORCOUNT, ata_bio->nblks));
|
|
} else { /* ncq/queued */
|
|
|
|
/*
|
|
* XXXX: Oops, ata command is not correct. And, atabus layer
|
|
* has not been supported yet now.
|
|
* Queued DMA read/write.
|
|
* read/write FPDMAQueued.
|
|
*/
|
|
|
|
if (ata_bio->flags & ATA_LBA48)
|
|
crqb->atacommand[i++] = htole16(CRQB_ATACOMMAND(
|
|
CRQB_ATACOMMAND_FEATURES, ata_bio->nblks >> 8));
|
|
crqb->atacommand[i++] = htole16(CRQB_ATACOMMAND(
|
|
CRQB_ATACOMMAND_FEATURES, ata_bio->nblks));
|
|
crqb->atacommand[i++] = htole16(CRQB_ATACOMMAND(
|
|
CRQB_ATACOMMAND_SECTORCOUNT, xfer->c_slot << 3));
|
|
}
|
|
if (ata_bio->flags & ATA_LBA48) {
|
|
crqb->atacommand[i++] = htole16(CRQB_ATACOMMAND(
|
|
CRQB_ATACOMMAND_LBALOW, blkno >> 24));
|
|
crqb->atacommand[i++] = htole16(CRQB_ATACOMMAND(
|
|
CRQB_ATACOMMAND_LBAMID, blkno >> 32));
|
|
crqb->atacommand[i++] = htole16(CRQB_ATACOMMAND(
|
|
CRQB_ATACOMMAND_LBAHIGH, blkno >> 40));
|
|
}
|
|
crqb->atacommand[i++] =
|
|
htole16(CRQB_ATACOMMAND(CRQB_ATACOMMAND_LBALOW, blkno));
|
|
crqb->atacommand[i++] =
|
|
htole16(CRQB_ATACOMMAND(CRQB_ATACOMMAND_LBAMID, blkno >> 8));
|
|
crqb->atacommand[i++] =
|
|
htole16(CRQB_ATACOMMAND(CRQB_ATACOMMAND_LBAHIGH, blkno >> 16));
|
|
crqb->atacommand[i++] =
|
|
htole16(CRQB_ATACOMMAND(CRQB_ATACOMMAND_DEVICE, head));
|
|
crqb->atacommand[i++] = htole16(
|
|
CRQB_ATACOMMAND(CRQB_ATACOMMAND_COMMAND, cmd) |
|
|
CRQB_ATACOMMAND_LAST);
|
|
}
|
|
#endif
|
|
|
|
static uint32_t
|
|
mvsata_read_preamps_gen1(struct mvsata_port *mvport)
|
|
{
|
|
struct mvsata_hc *hc = mvport->port_hc;
|
|
uint32_t reg;
|
|
|
|
reg = MVSATA_HC_READ_4(hc, SATAHC_I_PHYMODE(mvport->port));
|
|
/*
|
|
* [12:11] : pre
|
|
* [7:5] : amps
|
|
*/
|
|
return reg & 0x000018e0;
|
|
}
|
|
|
|
static void
|
|
mvsata_fix_phy_gen1(struct mvsata_port *mvport)
|
|
{
|
|
struct mvsata_softc *sc = device_private(MVSATA_DEV2(mvport));
|
|
struct mvsata_hc *mvhc = mvport->port_hc;
|
|
uint32_t reg;
|
|
int port = mvport->port, fix_apm_sq = 0;
|
|
|
|
if (sc->sc_model == PCI_PRODUCT_MARVELL_88SX5080) {
|
|
if (sc->sc_rev == 0x01)
|
|
fix_apm_sq = 1;
|
|
} else {
|
|
if (sc->sc_rev == 0x00)
|
|
fix_apm_sq = 1;
|
|
}
|
|
|
|
if (fix_apm_sq) {
|
|
/*
|
|
* Disable auto-power management
|
|
* 88SX50xx FEr SATA#12
|
|
*/
|
|
reg = MVSATA_HC_READ_4(mvhc, SATAHC_I_LTMODE(port));
|
|
reg |= (1 << 19);
|
|
MVSATA_HC_WRITE_4(mvhc, SATAHC_I_LTMODE(port), reg);
|
|
|
|
/*
|
|
* Fix squelch threshold
|
|
* 88SX50xx FEr SATA#9
|
|
*/
|
|
reg = MVSATA_HC_READ_4(mvhc, SATAHC_I_PHYCONTROL(port));
|
|
reg &= ~0x3;
|
|
reg |= 0x1;
|
|
MVSATA_HC_WRITE_4(mvhc, SATAHC_I_PHYCONTROL(port), reg);
|
|
}
|
|
|
|
/* Revert values of pre-emphasis and signal amps to the saved ones */
|
|
reg = MVSATA_HC_READ_4(mvhc, SATAHC_I_PHYMODE(port));
|
|
reg &= ~0x000018e0; /* pre and amps mask */
|
|
reg |= mvport->_fix_phy_param.pre_amps;
|
|
MVSATA_HC_WRITE_4(mvhc, SATAHC_I_PHYMODE(port), reg);
|
|
}
|
|
|
|
static void
|
|
mvsata_devconn_gen1(struct mvsata_port *mvport)
|
|
{
|
|
struct mvsata_softc *sc = device_private(MVSATA_DEV2(mvport));
|
|
|
|
/* Fix for 88SX50xx FEr SATA#2 */
|
|
mvport->_fix_phy_param._fix_phy(mvport);
|
|
|
|
/* If disk is connected, then enable the activity LED */
|
|
if (sc->sc_rev == 0x03) {
|
|
/* XXXXX */
|
|
}
|
|
}
|
|
|
|
static uint32_t
|
|
mvsata_read_preamps_gen2(struct mvsata_port *mvport)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = MVSATA_EDMA_READ_4(mvport, SATA_PHYM2);
|
|
/*
|
|
* [10:8] : amps
|
|
* [7:5] : pre
|
|
*/
|
|
return reg & 0x000007e0;
|
|
}
|
|
|
|
static void
|
|
mvsata_fix_phy_gen2(struct mvsata_port *mvport)
|
|
{
|
|
struct mvsata_softc *sc = device_private(MVSATA_DEV2(mvport));
|
|
uint32_t reg;
|
|
|
|
if ((sc->sc_gen == gen2 && sc->sc_rev == 0x07) ||
|
|
sc->sc_gen == gen2e) {
|
|
/*
|
|
* Fix for
|
|
* 88SX60X1 FEr SATA #23
|
|
* 88SX6042/88SX7042 FEr SATA #23
|
|
* 88F5182 FEr #SATA-S13
|
|
* 88F5082 FEr #SATA-S13
|
|
*/
|
|
reg = MVSATA_EDMA_READ_4(mvport, SATA_PHYM2);
|
|
reg &= ~(1 << 16);
|
|
reg |= (1 << 31);
|
|
MVSATA_EDMA_WRITE_4(mvport, SATA_PHYM2, reg);
|
|
|
|
delay(200);
|
|
|
|
reg = MVSATA_EDMA_READ_4(mvport, SATA_PHYM2);
|
|
reg &= ~((1 << 16) | (1 << 31));
|
|
MVSATA_EDMA_WRITE_4(mvport, SATA_PHYM2, reg);
|
|
|
|
delay(200);
|
|
}
|
|
|
|
/* Fix values in PHY Mode 3 Register.*/
|
|
reg = MVSATA_EDMA_READ_4(mvport, SATA_PHYM3);
|
|
reg &= ~0x7F900000;
|
|
reg |= 0x2A800000;
|
|
/* Implement Guidline 88F5182, 88F5082, 88F6082 (GL# SATA-S11) */
|
|
if (sc->sc_model == PCI_PRODUCT_MARVELL_88F5082 ||
|
|
sc->sc_model == PCI_PRODUCT_MARVELL_88F5182 ||
|
|
sc->sc_model == PCI_PRODUCT_MARVELL_88F6082)
|
|
reg &= ~0x0000001c;
|
|
MVSATA_EDMA_WRITE_4(mvport, SATA_PHYM3, reg);
|
|
|
|
/*
|
|
* Fix values in PHY Mode 4 Register.
|
|
* 88SX60x1 FEr SATA#10
|
|
* 88F5182 GL #SATA-S10
|
|
* 88F5082 GL #SATA-S10
|
|
*/
|
|
if ((sc->sc_gen == gen2 && sc->sc_rev == 0x07) ||
|
|
sc->sc_gen == gen2e) {
|
|
uint32_t tmp = 0;
|
|
|
|
/* 88SX60x1 FEr SATA #13 */
|
|
if (sc->sc_gen == 2 && sc->sc_rev == 0x07)
|
|
tmp = MVSATA_EDMA_READ_4(mvport, SATA_PHYM3);
|
|
|
|
reg = MVSATA_EDMA_READ_4(mvport, SATA_PHYM4);
|
|
reg |= (1 << 0);
|
|
reg &= ~(1 << 1);
|
|
/* PHY Mode 4 Register of Gen IIE has some restriction */
|
|
if (sc->sc_gen == gen2e) {
|
|
reg &= ~0x5de3fffc;
|
|
reg |= (1 << 2);
|
|
}
|
|
MVSATA_EDMA_WRITE_4(mvport, SATA_PHYM4, reg);
|
|
|
|
/* 88SX60x1 FEr SATA #13 */
|
|
if (sc->sc_gen == 2 && sc->sc_rev == 0x07)
|
|
MVSATA_EDMA_WRITE_4(mvport, SATA_PHYM3, tmp);
|
|
}
|
|
|
|
/* Revert values of pre-emphasis and signal amps to the saved ones */
|
|
reg = MVSATA_EDMA_READ_4(mvport, SATA_PHYM2);
|
|
reg &= ~0x000007e0; /* pre and amps mask */
|
|
reg |= mvport->_fix_phy_param.pre_amps;
|
|
reg &= ~(1 << 16);
|
|
if (sc->sc_gen == gen2e) {
|
|
/*
|
|
* according to mvSata 3.6.1, some IIE values are fixed.
|
|
* some reserved fields must be written with fixed values.
|
|
*/
|
|
reg &= ~0xC30FF01F;
|
|
reg |= 0x0000900F;
|
|
}
|
|
MVSATA_EDMA_WRITE_4(mvport, SATA_PHYM2, reg);
|
|
}
|
|
|
|
#ifndef MVSATA_WITHOUTDMA
|
|
static void
|
|
mvsata_edma_setup_crqb_gen2e(struct mvsata_port *mvport, int erqqip,
|
|
struct ata_xfer *xfer)
|
|
{
|
|
struct crqb_gen2e *crqb;
|
|
bus_addr_t eprd_addr;
|
|
uint32_t ctrlflg, rw;
|
|
uint8_t fis[RHD_FISLEN];
|
|
|
|
eprd_addr = mvport->port_eprd_dmamap->dm_segs[0].ds_addr +
|
|
mvport->port_reqtbl[xfer->c_slot].eprd_offset;
|
|
rw = (xfer->c_bio.flags & ATA_READ) ? CRQB_CDIR_READ : CRQB_CDIR_WRITE;
|
|
ctrlflg = (rw | CRQB_CDEVICEQUETAG(xfer->c_slot) |
|
|
CRQB_CPMPORT(xfer->c_drive) |
|
|
CRQB_CPRDMODE_EPRD | CRQB_CHOSTQUETAG_GEN2(xfer->c_slot));
|
|
|
|
crqb = &mvport->port_crqb->crqb_gen2e + erqqip;
|
|
crqb->cprdbl = htole32(eprd_addr & CRQB_CRQBL_EPRD_MASK);
|
|
crqb->cprdbh = htole32((eprd_addr >> 16) >> 16);
|
|
crqb->ctrlflg = htole32(ctrlflg);
|
|
|
|
satafis_rhd_construct_bio(xfer, fis);
|
|
|
|
crqb->atacommand[0] = 0;
|
|
crqb->atacommand[1] = 0;
|
|
/* copy over the ATA command part of the fis */
|
|
memcpy(&crqb->atacommand[2], &fis[rhd_command],
|
|
MIN(sizeof(crqb->atacommand) - 2, RHD_FISLEN - rhd_command));
|
|
}
|
|
|
|
#ifdef MVSATA_DEBUG
|
|
#define MVSATA_DEBUG_PRINT(type, size, n, p) \
|
|
do { \
|
|
int _i; \
|
|
u_char *_p = (p); \
|
|
\
|
|
printf(#type "(%d)", (n)); \
|
|
for (_i = 0; _i < (size); _i++, _p++) { \
|
|
if (_i % 16 == 0) \
|
|
printf("\n "); \
|
|
printf(" %02x", *_p); \
|
|
} \
|
|
printf("\n"); \
|
|
} while (0 /* CONSTCOND */)
|
|
|
|
static void
|
|
mvsata_print_crqb(struct mvsata_port *mvport, int n)
|
|
{
|
|
|
|
MVSATA_DEBUG_PRINT(crqb, sizeof(union mvsata_crqb),
|
|
n, (u_char *)(mvport->port_crqb + n));
|
|
}
|
|
|
|
static void
|
|
mvsata_print_crpb(struct mvsata_port *mvport, int n)
|
|
{
|
|
|
|
MVSATA_DEBUG_PRINT(crpb, sizeof(struct crpb),
|
|
n, (u_char *)(mvport->port_crpb + n));
|
|
}
|
|
|
|
static void
|
|
mvsata_print_eprd(struct mvsata_port *mvport, int n)
|
|
{
|
|
struct eprd *eprd;
|
|
int i = 0;
|
|
|
|
eprd = mvport->port_reqtbl[n].eprd;
|
|
while (1 /*CONSTCOND*/) {
|
|
MVSATA_DEBUG_PRINT(eprd, sizeof(struct eprd),
|
|
i, (u_char *)eprd);
|
|
if (eprd->eot & EPRD_EOT)
|
|
break;
|
|
eprd++;
|
|
i++;
|
|
}
|
|
}
|
|
#endif
|
|
#endif
|