236 lines
7.7 KiB
C
236 lines
7.7 KiB
C
/* $NetBSD: scnreg.h,v 1.9 1997/03/13 10:24:15 matthias Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1996, 1997 Philip L. Budne.
|
|
* Copyright (c) 1993 Philip A. Nelson.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Philip A. Nelson.
|
|
* 4. The name of Philip A. Nelson may not be used to endorse or promote
|
|
* products derived from this software without specific prior written
|
|
* permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY PHILIP NELSON ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL PHILIP NELSON BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
|
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
|
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
|
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* scnreg.h: definitions for 2681/2692/68881 duart
|
|
*/
|
|
|
|
/*
|
|
* register offsets
|
|
*/
|
|
|
|
/* per-channel regs */
|
|
#define CH_MR SCN_REG(0) /* rw mode register */
|
|
#define CH_SR SCN_REG(1) /* ro status register */
|
|
#define CH_CSR SCN_REG(1) /* wo clock select reg */
|
|
#define CH_CR SCN_REG(2) /* wo command reg */
|
|
#define CH_DAT SCN_REG(3) /* rw data reg */
|
|
|
|
/* duart-wide regs */
|
|
#define DU_IPCR SCN_REG(4) /* ro input port change reg */
|
|
#define DU_ACR SCN_REG(4) /* wo aux control reg */
|
|
#define DU_ISR SCN_REG(5) /* ro interrupt stat reg */
|
|
#define DU_IMR SCN_REG(5) /* wo interrupt mask reg */
|
|
#define DU_CTUR SCN_REG(6) /* rw counter timer upper reg */
|
|
#define DU_CTLR SCN_REG(7) /* rw counter timer lower reg */
|
|
#define DU_IP SCN_REG(13) /* ro input port */
|
|
#define DU_OPCR SCN_REG(13) /* wo output port cfg reg */
|
|
#define DU_CSTRT SCN_REG(14) /* ro start C/T cmd */
|
|
#define DU_OPSET SCN_REG(14) /* wo output port set */
|
|
#define DU_CSTOP SCN_REG(15) /* ro stop C/T cmd */
|
|
#define DU_OPCLR SCN_REG(15) /* wo output port reset */
|
|
|
|
/*
|
|
* Data Values
|
|
*/
|
|
|
|
/*
|
|
* MR (mode register) -- per channel
|
|
*/
|
|
|
|
/* MR0 (scn26c92 only) need to use CR_CMD_MR0 before access */
|
|
#define MR0_MODE 0x07 /* extended baud rate mode (MR0A only) */
|
|
#define MR0_TXINT 0x30 /* Tx int threshold */
|
|
#define MR0_RXINT 0x40 /* Rx int threshold (along with MR1_FFULL) */
|
|
#define MR0_RXWD 0x80 /* Rx watchdog (8 byte-times after last rx) */
|
|
|
|
#define MR0_MODE_0 0x00 /* Normal mode */
|
|
#define MR0_MODE_1 0x01 /* Extended mode 1 */
|
|
#define MR0_MODE_2 0x04 /* Extended mode 2 */
|
|
|
|
#define MR0_TXINT_EMPTY 0x00 /* TxInt when 8 FIFO bytes empty (default) */
|
|
#define MR0_TXINT_4 0x10 /* TxInt when 4 or more FIFO bytes empty */
|
|
#define MR0_TXINT_6 0x20 /* TxInt when 6 or more FIFO bytes empty */
|
|
#define MR0_TXINT_TXRDY 0x30 /* TxInt when 1 or more FIFO bytes empty */
|
|
|
|
/* MR1 (need to use CR_CMD_MR1 before each access) */
|
|
#define MR1_CS5 0x00
|
|
#define MR1_CS6 0x01
|
|
#define MR1_CS7 0x02
|
|
#define MR1_CS8 0x03
|
|
|
|
#define MR1_PEVEN 0x00
|
|
#define MR1_PODD 0x04
|
|
#define MR1_PNONE 0x10
|
|
|
|
#define MR1_RXBLK 0x20 /* "block" error mode */
|
|
#define MR1_FFULL 0x40 /* wait until FIFO full for rxint (cf MR0) */
|
|
#define MR1_RXRTS 0x80 /* auto RTS input flow ctrl */
|
|
|
|
/* MR2 (any access to MR after MR1) */
|
|
#define MR2_STOP 0x0f /* mask for stop bits */
|
|
#define MR2_STOP1 0x07
|
|
#define MR2_STOP2 0x0f
|
|
|
|
#define MR2_TXCTS 0x10 /* transmitter follows CTS */
|
|
#define MR2_TXRTS 0x20 /* RTS follows transmitter */
|
|
#define MR2_MODE 0xc0 /* mode mask */
|
|
|
|
/*
|
|
* IP (input port)
|
|
*/
|
|
#define IP_IP0 0x01
|
|
#define IP_IP1 0x02
|
|
#define IP_IP2 0x04
|
|
#define IP_IP3 0x08
|
|
#define IP_IP4 0x10
|
|
#define IP_IP5 0x20
|
|
#define IP_IP6 0x40
|
|
/* D7 is always 1 */
|
|
|
|
/*
|
|
* ACR (Aux Control Register)
|
|
*/
|
|
|
|
#define ACR_DELTA_IP0 0x01 /* enable IP0 delta interrupt */
|
|
#define ACR_DELTA_IP1 0x02 /* enable IP1 delta interrupt */
|
|
#define ACR_DELTA_IP2 0x04 /* enable IP2 delta interrupt */
|
|
#define ACR_DELTA_IP3 0x08 /* enable IP3 delta interrupt */
|
|
#define ACR_CT 0x70 /* counter/timer mode (ACT_CT_xxx) */
|
|
#define ACR_BRG 0x80 /* baud rate generator speed set */
|
|
|
|
/* counter/timer mode */
|
|
#define ACR_CT_CEXT 0x00 /* counter: external (IP2) */
|
|
#define ACR_CT_CTXA 0x10 /* counter: TxCA x 1 */
|
|
#define ACR_CT_CTXB 0x20 /* counter: TxCB x 1 */
|
|
#define ACR_CT_CCLK 0x30 /* counter: X1/CLK div 16 */
|
|
#define ACR_CT_TEXT1 0x40 /* timer: external (IP2) */
|
|
#define ACR_CT_TEXT16 0x50 /* timer: external (IP2) div 16 */
|
|
#define ACR_CT_TCLK1 0x60 /* timer: X1/CLK */
|
|
#define ACR_CT_TCLK16 0x70 /* timer: X1/CLK div 16 */
|
|
|
|
/*
|
|
* IPCR (Input Port Change Register) -- per channel
|
|
*/
|
|
#define IPCR_IP0 0x01
|
|
#define IPCR_IP1 0x02
|
|
#define IPCR_IP2 0x04
|
|
#define IPCR_IP3 0x08
|
|
#define IPCR_DELTA_IP0 0x10
|
|
#define IPCR_DELTA_IP1 0x20
|
|
#define IPCR_DELTA_IP2 0x40
|
|
#define IPCR_DELTA_IP3 0x80
|
|
|
|
/*
|
|
* output port config register
|
|
* if bit(s) clear OP line follows OP register OPn bit
|
|
*/
|
|
|
|
#define OPCR_OP7_TXRDYB 0x80 /* OP7: TxRDYB */
|
|
#define OPCR_OP6_TXRDYA 0x40 /* OP6: TxRDYA */
|
|
#define OPCR_OP5_RXRDYB 0x20 /* OP5: ch B RxRDY/FFULL */
|
|
#define OPCR_OP4_RXRDYA 0x10 /* OP4: ch A RxRDY/FFULL */
|
|
|
|
#define OPCR_OP3 0xC0 /* OP3: mask */
|
|
#define OPCR_OP2 0x03 /* OP2: mask */
|
|
|
|
/*
|
|
* output port
|
|
*/
|
|
#define OP_OP0 0x01
|
|
#define OP_OP1 0x02
|
|
#define OP_OP2 0x04
|
|
#define OP_OP3 0x08
|
|
#define OP_OP4 0x10
|
|
#define OP_OP5 0x20
|
|
#define OP_OP6 0x40
|
|
#define OP_OP7 0x80
|
|
|
|
/*
|
|
* CR (command register) -- per channel
|
|
*/
|
|
|
|
/* bits (may be or'ed together, with a command) */
|
|
#define CR_ENA_RX 0x01
|
|
#define CR_DIS_RX 0x02
|
|
#define CR_ENA_TX 0x04
|
|
#define CR_DIS_TX 0x08
|
|
|
|
/* commands */
|
|
#define CR_CMD_NOP 0x00
|
|
#define CR_CMD_MR1 0x10
|
|
#define CR_CMD_RESET_RX 0x20
|
|
#define CR_CMD_RESET_TX 0x30
|
|
#define CR_CMD_RESET_ERR 0x40
|
|
#define CR_CMD_RESET_BRK 0x50
|
|
#define CR_CMD_START_BRK 0x60
|
|
#define CR_CMD_STOP_BRK 0x70
|
|
|
|
/* 2692-only commands */
|
|
#define CR_CMD_RTS_ON 0x80 /* raise RTS */
|
|
#define CR_CMD_RTS_OFF 0x90 /* lower RTS */
|
|
#define CR_CMD_TIM_ON 0xa0 /* enable timeout mode */
|
|
#define CR_CMD_TIM_OFF 0xc0 /* reset timeout mode */
|
|
#define CR_CMD_PDN_ON 0xe0 /* power down mode on */
|
|
#define CR_CMD_PDN_RUN 0xf0 /* power down mode off (normal run) */
|
|
|
|
/* 26C92-only commands */
|
|
#define CR_CMD_MR0 0xb0 /* MR0 select */
|
|
|
|
|
|
/*
|
|
* SR (status register) -- per channel
|
|
*/
|
|
#define SR_RX_RDY 0x01
|
|
#define SR_RX_FFULL 0x02 /* rx fifo full */
|
|
#define SR_TX_RDY 0x04 /* tx room for more */
|
|
#define SR_TX_EMPTY 0x08 /* tx dry */
|
|
|
|
#define SR_OVERRUN 0x10
|
|
|
|
/* bits cleared by reset error (see MR1 error mode bit) */
|
|
#define SR_PARITY 0x20 /* received parity error */
|
|
#define SR_FRAME 0x40 /* recieved framing error */
|
|
#define SR_BREAK 0x80 /* recieved break */
|
|
|
|
/*
|
|
* Interrupt Mask Register (IMR) and ISR (Interrupt Status Register)
|
|
*/
|
|
#define INT_TXA 0x01 /* Tx Ready A */
|
|
#define INT_RXA 0x02 /* Rx Ready/FIFO Full A */
|
|
#define INT_BRKA 0x04 /* Delta Break A */
|
|
#define INT_CTR 0x08 /* counter ready */
|
|
#define INT_TXB 0x10 /* Tx Ready B */
|
|
#define INT_RXB 0x20 /* Rx Ready/FIFO Full B */
|
|
#define INT_BRKB 0x40 /* Delta Break B */
|
|
#define INT_IP 0x80 /* input port change */
|