233 lines
6.1 KiB
C
233 lines
6.1 KiB
C
/*-
|
|
* Copyright (c) 1990 The Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* William Jolitz.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of
|
|
* California, Berkeley and its contributors.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* from: @(#)wdbootblk.c 7.1 (Berkeley) 4/28/91
|
|
* $Id: wdbootblk.c,v 1.2 1993/05/22 08:02:27 cgd Exp $
|
|
*/
|
|
|
|
/*
|
|
* wdbootblk.s:
|
|
* Written 7/6/90 by William F. Jolitz
|
|
* Initial block boot for AT/386 with typical Western Digital
|
|
* WD 1002-WA2 (or upwards compatable). Works either as
|
|
* first and sole partition bootstrap, or as loaded by a
|
|
* earlier BIOS boot when on an inner partition of the disk.
|
|
*
|
|
* Goal is to read in sucessive 7.5Kbytes of bootstrap to
|
|
* execute.
|
|
*
|
|
* No attempt is made to handle disk errors.
|
|
*/
|
|
#include "i386/isa/isa.h"
|
|
#include "i386/isa/wdreg.h"
|
|
#define NOP inb $0x84,%al
|
|
#define BIOSRELOC 0x7c00
|
|
#define start RELOC+0x400
|
|
|
|
/* step 0 force descriptors to bottom of address space */
|
|
|
|
cli
|
|
.byte 0xb8,0x30,0x00 /* mov $0x30,%ax */
|
|
mov %ax, %ss
|
|
.byte 0xbc,0x00,0x01 /* mov $0x100,%sp */
|
|
|
|
xorl %eax,%eax
|
|
movl %ax,%ds
|
|
movl %ax,%es
|
|
|
|
/* obtain BIOS parameters for hard disk XXX */
|
|
movb $0x9f,%ah /* write to 0x9ff00 XXX */
|
|
movb $0xf0,%al
|
|
mov %ax,%es
|
|
xor %edi,%edi
|
|
|
|
.byte 0xf, 0xb4, 0x36 ; .word 0x41*4 /* lfs 0x41*4, %si */
|
|
xorb %ch,%ch
|
|
movb $0x10,%cl
|
|
fs
|
|
rep
|
|
movsb
|
|
|
|
.byte 0xf, 0xb4, 0x36 ; .word 0x46*4 /* lfs 0x46*4, %si */
|
|
xorb %ch,%ch
|
|
movb $0x10,%cl
|
|
fs
|
|
rep
|
|
movsb
|
|
|
|
xorl %eax,%eax
|
|
movl %ax,%es
|
|
|
|
/* step 1 load new descriptor table */
|
|
|
|
.byte 0x3E,0x0F,1,0x16
|
|
.word BIOSRELOC+0x6e #GDTptr
|
|
# word aword cs lgdt GDTptr
|
|
|
|
/* step 2 turn on protected mode */
|
|
|
|
smsw %ax
|
|
orb $1,%al
|
|
lmsw %ax
|
|
jmp 1f
|
|
nop
|
|
|
|
/* step 3 reload segment descriptors */
|
|
|
|
1:
|
|
xorl %eax,%eax
|
|
movb $0x10,%al
|
|
movl %ax,%ds
|
|
movl %ax,%es
|
|
movl %ax,%ss
|
|
word
|
|
ljmp $0x8,$ BIOSRELOC+0x74 /* would be nice if .-RELOC+0x7c00 worked */
|
|
|
|
/* Global Descriptor Table contains three descriptors:
|
|
* 0x00: Null: not used
|
|
* 0x08: Code: code segment starts at 0 and extents for 4 gigabytes
|
|
* 0x10: Data: data segment starts at 0 and extends for 4 gigabytes
|
|
* (overlays code)
|
|
*/
|
|
GDT:
|
|
NullDesc: .word 0,0,0,0 # null descriptor - not used
|
|
CodeDesc: .word 0xFFFF # limit at maximum: (bits 15:0)
|
|
.byte 0,0,0 # base at 0: (bits 23:0)
|
|
.byte 0x9f # present/priv level 0/code/conforming/readable
|
|
.byte 0xcf # page granular/default 32-bit/limit(bits 19:16)
|
|
.byte 0 # base at 0: (bits 31:24)
|
|
DataDesc: .word 0xFFFF # limit at maximum: (bits 15:0)
|
|
.byte 0,0,0 # base at 0: (bits 23:0)
|
|
.byte 0x93 # present/priv level 0/data/expand-up/writeable
|
|
.byte 0xcf # page granular/default 32-bit/limit(bits 19:16)
|
|
.byte 0 # base at 0: (bits 31:24)
|
|
|
|
/* Global Descriptor Table pointer
|
|
* contains 6-byte pointer information for LGDT
|
|
*/
|
|
GDTptr: .word 0x17 # limit to three 8 byte selectors(null,code,data)
|
|
.long BIOSRELOC+0x56 # GDT -- arrgh, gas again!
|
|
|
|
/* step 4 relocate to final bootstrap address. */
|
|
reloc:
|
|
movl $ BIOSRELOC,%esi
|
|
movl $ RELOC,%edi
|
|
movl $512,%ecx
|
|
rep
|
|
movsb
|
|
movl $0xa0000, %esp
|
|
pushl $dodisk
|
|
ret
|
|
|
|
/* step 5 load remaining 15 sectors off disk */
|
|
dodisk:
|
|
movl $ IO_WD1+wd_seccnt,%edx
|
|
movb $ 15,%al
|
|
outb %al,%dx
|
|
NOP
|
|
movl $ IO_WD1+wd_sector,%edx
|
|
movb $ 2,%al
|
|
outb %al,%dx
|
|
NOP
|
|
#outb(wdc+wd_cyl_lo, (cyloffset & 0xff));
|
|
#outb(wdc+wd_cyl_hi, (cyloffset >> 8));
|
|
#outb(wdc+wd_sdh, WDSD_IBM | (unit << 4));
|
|
|
|
movl $ IO_WD1+wd_command,%edx
|
|
movb $ WDCC_READ,%al
|
|
outb %al,%dx
|
|
NOP
|
|
cld
|
|
|
|
/* check to make sure controller is not busy and we have data ready */
|
|
readblk:
|
|
movl $ IO_WD1+wd_status,%edx
|
|
NOP
|
|
inb %dx,%al
|
|
testb $ WDCS_BUSY,%al
|
|
jnz readblk
|
|
testb $ WDCS_DRQ,%al
|
|
jz readblk
|
|
|
|
/* read a block into final position in memory */
|
|
|
|
movl $ IO_WD1+wd_data,%edx
|
|
movl $ 256,%ecx
|
|
.byte 0x66,0xf2,0x6d # rep insw
|
|
NOP
|
|
|
|
/* need more blocks to be read in? */
|
|
|
|
cmpl $ RELOC+16*512-1,%edi
|
|
jl readblk
|
|
|
|
/* for clever bootstrap, dig out boot unit and cylinder */
|
|
|
|
movl $ IO_WD1+wd_cyl_lo,%edx
|
|
inb %dx,%al
|
|
xorl %ecx,%ecx
|
|
movb %al,%cl
|
|
incl %edx
|
|
NOP
|
|
inb %dx,%al /* cyl_hi */
|
|
movb %al,%ch
|
|
pushl %ecx /* cyloffset */
|
|
|
|
incl %edx
|
|
xorl %eax,%eax
|
|
NOP
|
|
inb %dx,%al /* sdh */
|
|
andb $0x10,%al /* isolate unit # bit */
|
|
shrb $4,%al
|
|
pushl %eax /* unit */
|
|
|
|
/* wd controller is major device 0 */
|
|
xorl %eax,%eax
|
|
pushl %eax /* bootdev */
|
|
|
|
/* sorry, no flags at this point! */
|
|
|
|
movl $ start, %eax
|
|
call %eax /* main (dev, unit, offset) */
|
|
|
|
ebootblkcode:
|
|
|
|
/* remaining space usable for a disk label */
|
|
|
|
.org 0x1fe
|
|
.word 0xaa55 /* signature -- used by BIOS ROM */
|
|
|
|
ebootblk: /* MUST BE EXACTLY 0x200 BIG FOR SURE */
|