NetBSD/sys/arch/sun3/sun3x/dvma.c

313 lines
9.0 KiB
C

/* $NetBSD: dvma.c,v 1.23 2001/09/11 20:37:13 chs Exp $ */
/*-
* Copyright (c) 1996 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Gordon W. Ross and Jeremy Cooper.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* DVMA (Direct Virtual Memory Access - like DMA)
*
* In the Sun3 architecture, memory cycles initiated by secondary bus
* masters (DVMA devices) passed through the same MMU that governed CPU
* accesses. All DVMA devices were wired in such a way so that an offset
* was added to the addresses they issued, causing them to access virtual
* memory starting at address 0x0FF00000 - the offset. The task of
* enabling a DVMA device to access main memory only involved creating
* valid mapping in the MMU that translated these high addresses into the
* appropriate physical addresses.
*
* The Sun3x presents a challenge to programming DVMA because the MMU is no
* longer shared by both secondary bus masters and the CPU. The MC68030's
* built-in MMU serves only to manage virtual memory accesses initiated by
* the CPU. Secondary bus master bus accesses pass through a different MMU,
* aptly named the 'I/O Mapper'. To enable every device driver that uses
* DVMA to understand that these two address spaces are disconnected would
* require a tremendous amount of code re-writing. To avoid this, we will
* ensure that the I/O Mapper and the MC68030 MMU are programmed together,
* so that DVMA mappings are consistent in both the CPU virtual address
* space and secondary bus master address space - creating an environment
* just like the Sun3 system.
*
* The maximum address space that any DVMA device in the Sun3x architecture
* is capable of addressing is 24 bits wide (16 Megabytes.) We can alias
* all of the mappings that exist in the I/O mapper by duplicating them in
* a specially reserved section of the CPU's virtual address space, 16
* Megabytes in size. Whenever a DVMA buffer is allocated, the allocation
* code will enter in a mapping both in the MC68030 MMU page tables and the
* I/O mapper.
*
* The address returned by the allocation routine is a virtual address that
* the requesting driver must use to access the buffer. It is up to the
* device driver to convert this virtual address into the appropriate slave
* address that its device should issue to access the buffer. (There will be
* routines that assist the driver in doing so.)
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/proc.h>
#include <sys/malloc.h>
#include <sys/map.h>
#include <sys/buf.h>
#include <sys/vnode.h>
#include <sys/user.h>
#include <sys/core.h>
#include <sys/exec.h>
#include <uvm/uvm_extern.h>
#include <machine/autoconf.h>
#include <machine/cpu.h>
#include <machine/dvma.h>
#include <machine/pmap.h>
#include <sun3/sun3/machdep.h>
#include <sun3/sun3x/enable.h>
#include <sun3/sun3x/iommu.h>
/*
* Use a resource map to manage DVMA scratch-memory pages.
* Note: SunOS says last three pages are reserved (PROM?)
* Note: need a separate map (sub-map?) for last 1MB for
* use by VME slave interface.
*/
/* Number of slots in dvmamap. */
int dvma_max_segs = btoc(DVMA_MAP_SIZE);
struct map *dvmamap;
void
dvma_init()
{
/*
* Create the resource map for DVMA pages.
*/
dvmamap = malloc((sizeof(struct map) * dvma_max_segs),
M_DEVBUF, M_WAITOK);
rminit(dvmamap, btoc(DVMA_MAP_AVAIL), btoc(DVMA_MAP_BASE),
"dvmamap", dvma_max_segs);
/*
* Enable DVMA in the System Enable register.
* Note: This is only necessary for VME slave accesses.
* On-board devices are always capable of DVMA.
*/
*enable_reg |= ENA_SDVMA;
}
/*
* Given a DVMA address, return the physical address that
* would be used by some OTHER bus-master besides the CPU.
* (Examples: on-board ie/le, VME xy board).
*/
u_long
dvma_kvtopa(kva, bustype)
void * kva;
int bustype;
{
u_long addr, mask;
addr = (u_long)kva;
if ((addr & DVMA_MAP_BASE) != DVMA_MAP_BASE)
panic("dvma_kvtopa: bad dmva addr=0x%lx\n", addr);
switch (bustype) {
case BUS_OBIO:
case BUS_OBMEM:
mask = DVMA_OBIO_SLAVE_MASK;
break;
default: /* VME bus device. */
mask = DVMA_VME_SLAVE_MASK;
break;
}
return(addr & mask);
}
/*
* Map a range [va, va+len] of wired virtual addresses in the given map
* to a kernel address in DVMA space.
*/
void *
dvma_mapin(kmem_va, len, canwait)
void * kmem_va;
int len, canwait;
{
void * dvma_addr;
vaddr_t kva, tva;
int npf, s;
paddr_t pa;
long off, pn;
boolean_t rv;
kva = (vaddr_t)kmem_va;
#ifdef DIAGNOSTIC
/*
* Addresses below VM_MIN_KERNEL_ADDRESS are not part of the kernel
* map and should not participate in DVMA.
*/
if (kva < VM_MIN_KERNEL_ADDRESS)
panic("dvma_mapin: bad kva");
#endif
/*
* Calculate the offset of the data buffer from a page boundary.
*/
off = kva & PGOFSET;
kva -= off; /* Truncate starting address to nearest page. */
len = round_page(len + off); /* Round the buffer length to pages. */
npf = btoc(len); /* Determine the number of pages to be mapped. */
s = splvm();
for (;;) {
/*
* Try to allocate DVMA space of the appropriate size
* in which to do a transfer.
*/
pn = rmalloc(dvmamap, npf);
if (pn != 0)
break;
if (canwait) {
(void)tsleep(dvmamap, PRIBIO+1, "physio", 0);
continue;
}
splx(s);
return NULL;
}
splx(s);
/*
* Tva is the starting page to which the data buffer will be double
* mapped. Dvma_addr is the starting address of the buffer within
* that page and is the return value of the function.
*/
tva = ctob(pn);
dvma_addr = (void *) (tva + off);
for (;npf--; kva += NBPG, tva += NBPG) {
/*
* Retrieve the physical address of each page in the buffer
* and enter mappings into the I/O MMU so they may be seen
* by external bus masters and into the special DVMA space
* in the MC68030 MMU so they may be seen by the CPU.
*/
rv = pmap_extract(pmap_kernel(), kva, &pa);
#ifdef DEBUG
if (rv == FALSE)
panic("dvma_mapin: null page frame");
#endif /* DEBUG */
iommu_enter((tva & IOMMU_VA_MASK), pa);
pmap_kenter_pa(tva, pa | PMAP_NC, VM_PROT_READ | VM_PROT_WRITE);
}
pmap_update(pmap_kernel());
return (dvma_addr);
}
/*
* Remove double map of `va' in DVMA space at `kva'.
*
* TODO - This function might be the perfect place to handle the
* synchronization between the DVMA cache and central RAM
* on the 3/470.
*/
void
dvma_mapout(dvma_addr, len)
void * dvma_addr;
int len;
{
u_long kva;
int s, off;
kva = (u_long)dvma_addr;
off = (int)kva & PGOFSET;
kva -= off;
len = round_page(len + off);
iommu_remove((kva & IOMMU_VA_MASK), len);
pmap_kremove(kva, len);
pmap_update(pmap_kernel());
s = splvm();
rmfree(dvmamap, btoc(len), btoc(kva));
wakeup(dvmamap);
splx(s);
}
/*
* Allocate actual memory pages in DVMA space.
* (For sun3 compatibility - the ie driver.)
*/
void *
dvma_malloc(bytes)
size_t bytes;
{
void *new_mem, *dvma_mem;
vsize_t new_size;
if (!bytes)
return NULL;
new_size = m68k_round_page(bytes);
new_mem = (void*)uvm_km_alloc(kernel_map, new_size);
if (!new_mem)
return NULL;
dvma_mem = dvma_mapin(new_mem, new_size, 1);
return (dvma_mem);
}
/*
* Free pages from dvma_malloc()
*/
void
dvma_free(addr, size)
void *addr;
size_t size;
{
vsize_t sz = m68k_round_page(size);
dvma_mapout(addr, sz);
/* XXX: need kmem address to free it...
Oh well, we never call this anyway. */
}