210 lines
6.4 KiB
C
210 lines
6.4 KiB
C
/* $NetBSD: scnreg.h,v 1.5 1994/10/26 08:24:19 cgd Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1993 Philip A. Nelson.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Philip A. Nelson.
|
|
* 4. The name of Philip A. Nelson may not be used to endorse or promote
|
|
* products derived from this software without specific prior written
|
|
* permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY PHILIP NELSON ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL PHILIP NELSON BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
|
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
|
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
|
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* scnreg.h: definitions for the scn serial driver.
|
|
*/
|
|
|
|
/* Constants. */
|
|
#ifdef COMDEF_SPEED
|
|
#undef TTYDEF_SPEED
|
|
#define TTYDEF_SPEED COMDEF_SPEED /* default baud rate */
|
|
#endif
|
|
|
|
#define SCN_FIRST_ADR 0x28000000 /* address of first RS232 port */
|
|
#define SCN_FIRST_MAP_ADR 0xFFC80000 /* mapped address of first port */
|
|
|
|
#define SCN_SIZE 0x8 /* address space for port */
|
|
|
|
#define SCN_CONSOLE 0 /* minor number of console */
|
|
|
|
#define SCN_CON_MAP_STAT 0xFFC80001 /* raw addresses for console */
|
|
#define SCN_CON_MAP_DATA 0xFFC80003 /* Mapped .... */
|
|
#define SCN_CON_MAP_ISR 0xFFC80005
|
|
|
|
#define SCN_CON_STAT 0x28000001 /* raw addresses for console */
|
|
#define SCN_CON_DATA 0x28000003 /* Unmapped .... */
|
|
#define SCN_CON_ISR 0x28000005
|
|
|
|
|
|
/* SCN2691 registers, values. */
|
|
#define LINE_SZ 0x08
|
|
#define UART_SZ 0x10
|
|
#define MR_ADR (line_base+0)
|
|
#define STAT_ADR (line_base+1)
|
|
#define SPEED_ADR (line_base+1)
|
|
#define CMD_ADR (line_base+2)
|
|
#define DATA_ADR (line_base+3)
|
|
#define IPCR_ADR (uart_base+4)
|
|
#define ACR_ADR (uart_base+4)
|
|
#define ISR_ADR (uart_base+5)
|
|
#define IMR_ADR (uart_base+5)
|
|
#define IP_ADR (uart_base+13)
|
|
#define OPCR_ADR (uart_base+13)
|
|
#define SET_OP_ADR (uart_base+14)
|
|
#define CLR_OP_ADR (uart_base+15)
|
|
|
|
/* Data Values */
|
|
#define LC_ODD 0x04
|
|
#define LC_EVEN 0x00
|
|
#define LC_NONE 0x10
|
|
#define LC_STOP1 0x07
|
|
#define LC_STOP2 0x0f
|
|
#define LC_BITS5 0x00
|
|
#define LC_BITS6 0x01
|
|
#define LC_BITS7 0x02
|
|
#define LC_BITS8 0x03
|
|
#define LC_CHARS 0x03
|
|
#define LC_CHARS_SHIFT 0x08
|
|
#define LC_SP_GRP 0x10
|
|
#define LC_SP_BOTH 0x20
|
|
|
|
#define RTS_BIT 0x1
|
|
#define CTS_BIT 0x1
|
|
#define DTR_BIT 0x4
|
|
#define DCD_BIT 0x4
|
|
|
|
/* CR (command) register values. */
|
|
#define CMD_ENA_RX 0x01
|
|
#define CMD_DIS_RX 0x02
|
|
#define CMD_ENA_TX 0x04
|
|
#define CMD_DIS_TX 0x08
|
|
#define CMD_MR1 0x10
|
|
#define CMD_RESET_RX 0x20
|
|
#define CMD_RESET_TX 0x30
|
|
#define CMD_RESET_ERR 0x40
|
|
#define CMD_RESET_BRK 0x50
|
|
#define CMD_START_BRK 0x60
|
|
#define CMD_STOP_BRK 0x70
|
|
|
|
/* SR register */
|
|
#define SR_RX_RDY 0x01
|
|
#define SR_TX_RDY 0x04
|
|
#define SR_BREAK 0x80
|
|
#define SR_FRAME 0x40
|
|
#define SR_PARITY 0x20
|
|
#define SR_OVERRUN 0x10
|
|
|
|
/* Output port configuration. */
|
|
#define OPCR_CONFIG 0x00
|
|
|
|
/* Input port interrupt config. */
|
|
#define ACR_CTS 0x01
|
|
#define ACR_DCD 0x04
|
|
#define IPCR_CTS 0x10
|
|
#define IPCR_DCD 0x40
|
|
|
|
/* Interrupt configurations. */
|
|
#define IMR_IP_INT 0x80
|
|
#define IMR_BRK_INT 0x04
|
|
#define IMR_RX_INT 0x02
|
|
#define IMR_TX_INT 0x01
|
|
#define IMR_BRKB_INT 0x40
|
|
#define IMR_RXB_INT 0x20
|
|
#define IMR_TXB_INT 0x10
|
|
|
|
/* If we need a delay.... */
|
|
#define DELAY(x) {int i; for (i=0; i<x*10000; i++); }
|
|
|
|
#define istart(rs) \
|
|
(WR_ADR(u_char, rs->opset_port, (RTS_BIT | DTR_BIT) << (rs)->a_or_b))
|
|
|
|
#define istop(rs) \
|
|
(WR_ADR(u_char, rs->opclr_port, RTS_BIT << (rs)->a_or_b))
|
|
|
|
#define get_dcd(rs) \
|
|
(RD_ADR(u_char, rs->ip_port) & (DCD_BIT << (1-rs->a_or_b)))
|
|
|
|
#define tx_rdy(rs) \
|
|
(RD_ADR(u_char, rs->stat_port) & SR_TX_RDY)
|
|
|
|
/* Interrupts on and off. */
|
|
#define tx_ints_off(rs) \
|
|
{ rs->uart->imr_int_bits &= ~((IMR_TX_INT) << (4*rs->a_or_b)); \
|
|
WR_ADR (u_char, rs->uart->imr_port, rs->uart->imr_int_bits); }
|
|
|
|
#define tx_ints_on(rs) \
|
|
{ rs->uart->imr_int_bits |= (IMR_TX_INT) << (4*rs->a_or_b); \
|
|
WR_ADR (u_char, rs->uart->imr_port, rs->uart->imr_int_bits); }
|
|
|
|
#define rx_ints_off(rs) \
|
|
{ rs->uart->imr_int_bits &= ~((IMR_RX_INT) << (4*rs->a_or_b)); \
|
|
WR_ADR (u_char, rs->uart->imr_port, rs->uart->imr_int_bits); }
|
|
|
|
#define rx_ints_on(rs) \
|
|
{ rs->uart->imr_int_bits |= (IMR_RX_INT) << (4*rs->a_or_b); \
|
|
WR_ADR (u_char, rs->uart->imr_port, rs->uart->imr_int_bits); }
|
|
|
|
/* Structure definitions. */
|
|
typedef unsigned long port_t;
|
|
|
|
/* The DUART description table */
|
|
struct duart_info {
|
|
char i_speed[2], o_speed[2]; /* Channel A and B speeds. */
|
|
char i_code[2], o_code[2]; /* Channel A and B speeds. */
|
|
char speed_grp; /* ACR bit 7 */
|
|
char acr_int_bits; /* ACR bits 0-6 */
|
|
char imr_int_bits; /* IMR bits current set. */
|
|
|
|
port_t isr_port;
|
|
port_t imr_port;
|
|
port_t ipcr_port;
|
|
port_t opcr_port;
|
|
};
|
|
|
|
/* RS232 device structure, one per device. */
|
|
struct rs232_s {
|
|
int unit; /* unit number of this line (base 0) */
|
|
struct duart_info *uart; /* pointer to uart struct */
|
|
char a_or_b; /* 0 => A, 1 => B */
|
|
|
|
long scn_bits; /* Temp! for TIOCM ... */
|
|
|
|
port_t xmit_port; /* i/o ports */
|
|
port_t recv_port;
|
|
port_t mr_port;
|
|
port_t stat_port; /* sra or srb */
|
|
port_t speed_port; /* csra or csrb */
|
|
port_t cmd_port; /* cra or crb */
|
|
port_t acr_port;
|
|
port_t ip_port;
|
|
port_t opset_port;
|
|
port_t opclr_port;
|
|
|
|
unsigned char lstatus; /* last line status */
|
|
unsigned framing_errors; /* error counts (no reporting yet) */
|
|
unsigned overrun_errors;
|
|
unsigned parity_errors;
|
|
unsigned break_interrupts;
|
|
|
|
};
|
|
|