NetBSD/sys/arch/arm/sa11x0/sa1111_reg.h
bsh b454cbf9c6 + protect against including twice
+ add bit definitions in SKCR
+ add keyboard controller registers
2002-12-18 04:09:31 +00:00

129 lines
4.6 KiB
C

/* $NetBSD: sa1111_reg.h,v 1.3 2002/12/18 04:09:31 bsh Exp $ */
/*-
* Copyright (c) 2001 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by IWAMOTO Toshihiro.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _ARM_SA11X0_SA1111_REG_H
#define _ARM_SA11X0_SA1111_REG_H
/* Interrupt Controller */
/* number of interrupt bits */
#define SACCIC_LEN 55
/* System Bus Interface */
#define SACCSBI_SKCR 0x0000
#define SKCR_PLLBYPASS (1<<0)
#define SKCR_RCLKEN (1<<1)
#define SKCR_SLEEP (1<<2)
#define SKCR_DOZE (1<<3)
#define SKCR_VCOOFF (1<<4)
#define SKCR_RDYEN (1<<7)
#define SKCR_SELAC (1<<8) /* AC Link or I2S */
#define SKCR_NOEEN (1<<12) /* Enable nOE */
#define SACCSBI_SMCR 0x0004
#define SACCSBI_SKID 0x0008
/* System Controller */
#define SACCSC_SKPCR 0x0200
/* USB Host Controller */
#define SACCUSB_REVISION 0x0400
#define SACCUSB_CONTROL 0x0404
#define SACCUSB_STATUS 0x0408
#define SACCUSB_RESET 0x051C
/* Interrupt Controller */
#define SACCIC_INTTEST0 0x1600
#define SACCIC_INTTEST1 0x1604
#define SACCIC_INTEN0 0x1608
#define SACCIC_INTEN1 0x160C
#define SACCIC_INTPOL0 0x1610
#define SACCIC_INTPOL1 0x1614
#define SACCIC_INTTSTSEL 0x1618
#define SACCIC_INTSTATCLR0 0x161C
#define SACCIC_INTSTATCLR1 0x1620
#define SACCIC_INTSET0 0x1624
#define SACCIC_INTSET1 0x1628
#define SACCIC_WAKE_EN0 0x162C
#define SACCIC_WAKE_EN1 0x1630
#define SACCIC_WAKE_POL0 0x1634
#define SACCIC_WAKE_POL1 0x1638
/* GPIO registers */
#define SACCGPIOA_DDR 0x1000 /* data direction */
#define SACCGPIOA_DVR 0x1004 /* data value */
#define SACCGPIOA_SDR 0x1008 /* sleep direction */
#define SACCGPIOA_SSR 0x100C /* sleep state */
#define SACCGPIOB_DDR 0x1010
#define SACCGPIOB_DVR 0x1014
#define SACCGPIOB_SDR 0x1018
#define SACCGPIOB_SSR 0x101C
#define SACCGPIOC_DDR 0x1020
#define SACCGPIOC_DVR 0x1024
#define SACCGPIOC_SDR 0x1028
#define SACCGPIOC_SSR 0x102C
#define SACC_KBD0 0x0a00
#define SACC_KBD1 0x0c00
#define SACCKBD_CR 0x00
#define KBDCR_FKC (1<<0) /* Force MSCLK/TPCLK low */
#define KBDCR_FKD (1<<1) /* Force MSDATA/TPDATA low */
#define KBDCR_ENA (1<<3) /* Enable */
#define SACCKBD_STAT 0x04
#define KBDSTAT_KBC (1<<0) /* KBCLK pin value */
#define KBDSTAT_KBD (1<<1) /* KBDATA pin value */
#define KBDSTAT_RXP (1<<2) /* Parity */
#define KBDSTAT_ENA (1<<3) /* Enable */
#define KBDSTAT_RXB (1<<4) /* Rx busy */
#define KBDSTAT_RXF (1<<5) /* Rx full */
#define KBDSTAT_TXB (1<<6) /* Tx busy */
#define KBDSTAT_TXE (1<<7) /* Tx empty */
#define KBDSTAT_STP (1<<8) /* Stop bit error */
#define SACCKBD_DATA 0x08
#define SACCKBD_CLKDIV 0x0c
#define KBDCLKDIV_DIV8 0
#define KBDCLKDIV_DIV4 1
#define KBDCLKDIV_DIV2 2
#define SACCKBD_CLKPRECNT 0x10
#define SACCKBD_KBDITR 0x14 /* Interrupt test */
#define SACCKBD_SIZE 0x18
#endif /* _ARM_SA11X0_SA1111_REG_H */