NetBSD/sys/dev/sbus/esp_sbus.c

767 lines
19 KiB
C

/* $NetBSD: esp_sbus.c,v 1.51 2009/09/17 16:28:12 tsutsui Exp $ */
/*-
* Copyright (c) 1997, 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Charles M. Hannum; Jason R. Thorpe of the Numerical Aerospace
* Simulation Facility, NASA Ames Research Center; Paul Kranenburg.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: esp_sbus.c,v 1.51 2009/09/17 16:28:12 tsutsui Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/buf.h>
#include <sys/malloc.h>
#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>
#include <dev/scsipi/scsi_message.h>
#include <sys/bus.h>
#include <sys/intr.h>
#include <machine/autoconf.h>
#include <dev/ic/lsi64854reg.h>
#include <dev/ic/lsi64854var.h>
#include <dev/ic/ncr53c9xreg.h>
#include <dev/ic/ncr53c9xvar.h>
#include <dev/sbus/sbusvar.h>
#include "opt_ddb.h"
/* #define ESP_SBUS_DEBUG */
struct esp_softc {
struct ncr53c9x_softc sc_ncr53c9x; /* glue to MI code */
bus_space_tag_t sc_bustag;
bus_dma_tag_t sc_dmatag;
bus_space_handle_t sc_reg; /* the registers */
struct lsi64854_softc *sc_dma; /* pointer to my dma */
int sc_pri; /* SBUS priority */
};
int espmatch_sbus(device_t, cfdata_t, void *);
void espattach_sbus(device_t, device_t, void *);
void espattach_dma(device_t, device_t, void *);
static void espattach(struct esp_softc *, struct ncr53c9x_glue *);
CFATTACH_DECL_NEW(esp_sbus, sizeof(struct esp_softc),
espmatch_sbus, espattach_sbus, NULL, NULL);
CFATTACH_DECL_NEW(esp_dma, sizeof(struct esp_softc),
espmatch_sbus, espattach_dma, NULL, NULL);
/*
* Functions and the switch for the MI code.
*/
static uint8_t esp_read_reg(struct ncr53c9x_softc *, int);
static void esp_write_reg(struct ncr53c9x_softc *, int, uint8_t);
static uint8_t esp_rdreg1(struct ncr53c9x_softc *, int);
static void esp_wrreg1(struct ncr53c9x_softc *, int, uint8_t);
static int esp_dma_isintr(struct ncr53c9x_softc *);
static void esp_dma_reset(struct ncr53c9x_softc *);
static int esp_dma_intr(struct ncr53c9x_softc *);
static int esp_dma_setup(struct ncr53c9x_softc *, uint8_t **,
size_t *, int, size_t *);
static void esp_dma_go(struct ncr53c9x_softc *);
static void esp_dma_stop(struct ncr53c9x_softc *);
static int esp_dma_isactive(struct ncr53c9x_softc *);
#ifdef DDB
static void esp_init_ddb_cmds(void);
#endif
static struct ncr53c9x_glue esp_sbus_glue = {
esp_read_reg,
esp_write_reg,
esp_dma_isintr,
esp_dma_reset,
esp_dma_intr,
esp_dma_setup,
esp_dma_go,
esp_dma_stop,
esp_dma_isactive,
NULL, /* gl_clear_latched_intr */
};
static struct ncr53c9x_glue esp_sbus_glue1 = {
esp_rdreg1,
esp_wrreg1,
esp_dma_isintr,
esp_dma_reset,
esp_dma_intr,
esp_dma_setup,
esp_dma_go,
esp_dma_stop,
esp_dma_isactive,
NULL, /* gl_clear_latched_intr */
};
int
espmatch_sbus(device_t parent, cfdata_t cf, void *aux)
{
int rv;
struct sbus_attach_args *sa = aux;
if (strcmp("SUNW,fas", sa->sa_name) == 0)
return 1;
rv = (strcmp(cf->cf_name, sa->sa_name) == 0 ||
strcmp("ptscII", sa->sa_name) == 0);
return rv;
}
void
espattach_sbus(device_t parent, device_t self, void *aux)
{
struct esp_softc *esc = device_private(self);
struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x;
struct sbus_softc *sbsc = device_private(parent);
struct sbus_attach_args *sa = aux;
struct lsi64854_softc *lsc;
device_t dma_dev;
int burst, sbusburst;
sc->sc_dev = self;
#ifdef DDB
esp_init_ddb_cmds();
#endif
esc->sc_bustag = sa->sa_bustag;
esc->sc_dmatag = sa->sa_dmatag;
sc->sc_id = prom_getpropint(sa->sa_node, "initiator-id", 7);
sc->sc_freq = prom_getpropint(sa->sa_node, "clock-frequency", -1);
if (sc->sc_freq < 0)
sc->sc_freq = sbsc->sc_clockfreq;
#ifdef ESP_SBUS_DEBUG
aprint_normal("\n");
aprint_normal_dev(self, "%s: sc_id %d, freq %d\n",
__func__, sc->sc_id, sc->sc_freq);
aprint_normal("%s", device_xname(self));
#endif
if (strcmp("SUNW,fas", sa->sa_name) == 0) {
/*
* fas has 2 register spaces: dma(lsi64854) and
* SCSI core (ncr53c9x)
*/
if (sa->sa_nreg != 2) {
aprint_error(": %d register spaces\n", sa->sa_nreg);
return;
}
/*
* allocate space for dma, in SUNW,fas there are no separate
* dma device
*/
lsc = malloc(sizeof(struct lsi64854_softc), M_DEVBUF, M_NOWAIT);
if (lsc == NULL) {
aprint_error(": out of memory (lsi64854_softc)\n");
return;
}
lsc->sc_dev = malloc(sizeof(struct device), M_DEVBUF,
M_NOWAIT | M_ZERO);
if (lsc->sc_dev == NULL) {
aprint_error(": out of memory (device_t)\n");
free(lsc, M_DEVBUF);
return;
}
esc->sc_dma = lsc;
lsc->sc_bustag = sa->sa_bustag;
lsc->sc_dmatag = sa->sa_dmatag;
strlcpy(lsc->sc_dev->dv_xname, device_xname(sc->sc_dev),
sizeof(lsc->sc_dev->dv_xname));
/* Map dma registers */
if (sa->sa_npromvaddrs) {
sbus_promaddr_to_handle(sa->sa_bustag,
sa->sa_promvaddrs[0], &lsc->sc_regs);
} else {
if (sbus_bus_map(sa->sa_bustag,
sa->sa_reg[0].oa_space,
sa->sa_reg[0].oa_base,
sa->sa_reg[0].oa_size,
0, &lsc->sc_regs) != 0) {
aprint_error(": cannot map dma registers\n");
return;
}
}
/*
* XXX is this common(from bpp.c), the same in dma_sbus...etc.
*
* Get transfer burst size from PROM and plug it into the
* controller registers. This is needed on the Sun4m; do
* others need it too?
*/
sbusburst = sbsc->sc_burst;
if (sbusburst == 0)
sbusburst = SBUS_BURST_32 - 1; /* 1->16 */
burst = prom_getpropint(sa->sa_node, "burst-sizes", -1);
#if ESP_SBUS_DEBUG
aprint_normal("%s: burst 0x%x, sbus 0x%x\n",
__func__, burst, sbusburst);
aprint_normal("%s", device_xname(self));
#endif
if (burst == -1)
/* take SBus burst sizes */
burst = sbusburst;
/* Clamp at parent's burst sizes */
burst &= sbusburst;
lsc->sc_burst = (burst & SBUS_BURST_32) ? 32 :
(burst & SBUS_BURST_16) ? 16 : 0;
lsc->sc_channel = L64854_CHANNEL_SCSI;
lsc->sc_client = sc;
lsi64854_attach(lsc);
/*
* map SCSI core registers
*/
if (sa->sa_npromvaddrs > 1) {
sbus_promaddr_to_handle(sa->sa_bustag,
sa->sa_promvaddrs[1], &esc->sc_reg);
} else {
if (sbus_bus_map(sa->sa_bustag,
sa->sa_reg[1].oa_space,
sa->sa_reg[1].oa_base,
sa->sa_reg[1].oa_size,
0, &esc->sc_reg) != 0) {
aprint_error(": cannot map "
"scsi core registers\n");
return;
}
}
if (sa->sa_nintr == 0) {
aprint_error(": no interrupt property\n");
return;
}
esc->sc_pri = sa->sa_pri;
espattach(esc, &esp_sbus_glue);
return;
}
/*
* Find the DMA by poking around the dma device structures
*
* What happens here is that if the dma driver has not been
* configured, then this returns a NULL pointer. Then when the
* dma actually gets configured, it does the opposing test, and
* if the sc->sc_esp field in it's softc is NULL, then tries to
* find the matching esp driver.
*/
dma_dev = device_find_by_driver_unit("dma", device_unit(self));
if (dma_dev == NULL) {
aprint_error(": no corresponding DMA device\n");
return;
}
esc->sc_dma = device_private(dma_dev);
esc->sc_dma->sc_client = sc;
/*
* The `ESC' DMA chip must be reset before we can access
* the esp registers.
*/
if (esc->sc_dma->sc_rev == DMAREV_ESC)
DMA_RESET(esc->sc_dma);
/*
* Map my registers in, if they aren't already in virtual
* address space.
*/
if (sa->sa_npromvaddrs) {
sbus_promaddr_to_handle(sa->sa_bustag,
sa->sa_promvaddrs[0], &esc->sc_reg);
} else {
if (sbus_bus_map(sa->sa_bustag,
sa->sa_slot, sa->sa_offset, sa->sa_size,
0, &esc->sc_reg) != 0) {
aprint_error(": cannot map registers\n");
return;
}
}
if (sa->sa_nintr == 0) {
/*
* No interrupt properties: we quit; this might
* happen on e.g. a Sparc X terminal.
*/
aprint_error(": no interrupt property\n");
return;
}
esc->sc_pri = sa->sa_pri;
if (strcmp("ptscII", sa->sa_name) == 0) {
espattach(esc, &esp_sbus_glue1);
} else {
espattach(esc, &esp_sbus_glue);
}
}
void
espattach_dma(device_t parent, device_t self, void *aux)
{
struct esp_softc *esc = device_private(self);
struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x;
struct sbus_attach_args *sa = aux;
if (strcmp("ptscII", sa->sa_name) == 0) {
return;
}
sc->sc_dev = self;
esc->sc_bustag = sa->sa_bustag;
esc->sc_dmatag = sa->sa_dmatag;
sc->sc_id = prom_getpropint(sa->sa_node, "initiator-id", 7);
sc->sc_freq = prom_getpropint(sa->sa_node, "clock-frequency", -1);
esc->sc_dma = device_private(parent);
esc->sc_dma->sc_client = sc;
/*
* Map my registers in, if they aren't already in virtual
* address space.
*/
if (sa->sa_npromvaddrs) {
sbus_promaddr_to_handle(sa->sa_bustag,
sa->sa_promvaddrs[0], &esc->sc_reg);
} else {
if (sbus_bus_map(sa->sa_bustag,
sa->sa_slot, sa->sa_offset, sa->sa_size,
0, &esc->sc_reg) != 0) {
aprint_error(": cannot map registers\n");
return;
}
}
if (sa->sa_nintr == 0) {
/*
* No interrupt properties: we quit; this might
* happen on e.g. a Sparc X terminal.
*/
aprint_error(": no interrupt property\n");
return;
}
esc->sc_pri = sa->sa_pri;
espattach(esc, &esp_sbus_glue);
}
/*
* Attach this instance, and then all the sub-devices
*/
void
espattach(struct esp_softc *esc, struct ncr53c9x_glue *gluep)
{
struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x;
void *icookie;
unsigned int uid = 0;
/*
* Set up glue for MI code early; we use some of it here.
*/
sc->sc_glue = gluep;
/* gimme MHz */
sc->sc_freq /= 1000000;
/*
* XXX More of this should be in ncr53c9x_attach(), but
* XXX should we really poke around the chip that much in
* XXX the MI code? Think about this more...
*/
/*
* It is necessary to try to load the 2nd config register here,
* to find out what rev the esp chip is, else the ncr53c9x_reset
* will not set up the defaults correctly.
*/
sc->sc_cfg1 = sc->sc_id | NCRCFG1_PARENB;
sc->sc_cfg2 = NCRCFG2_SCSI2 | NCRCFG2_RPE;
sc->sc_cfg3 = NCRCFG3_CDB;
NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2);
if ((NCR_READ_REG(sc, NCR_CFG2) & ~NCRCFG2_RSVD) !=
(NCRCFG2_SCSI2 | NCRCFG2_RPE)) {
sc->sc_rev = NCR_VARIANT_ESP100;
} else {
sc->sc_cfg2 = NCRCFG2_SCSI2;
NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2);
sc->sc_cfg3 = 0;
NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3);
sc->sc_cfg3 = (NCRCFG3_CDB | NCRCFG3_FCLK);
NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3);
if (NCR_READ_REG(sc, NCR_CFG3) !=
(NCRCFG3_CDB | NCRCFG3_FCLK)) {
sc->sc_rev = NCR_VARIANT_ESP100A;
} else {
/* NCRCFG2_FE enables > 64K transfers */
sc->sc_cfg2 |= NCRCFG2_FE;
sc->sc_cfg3 = 0;
NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3);
sc->sc_rev = NCR_VARIANT_ESP200;
/*
* XXX spec says it's valid after power up or
* chip reset
*/
uid = NCR_READ_REG(sc, NCR_UID);
if (((uid & 0xf8) >> 3) == 0x0a) /* XXX */
sc->sc_rev = NCR_VARIANT_FAS366;
}
}
#ifdef ESP_SBUS_DEBUG
aprint_debug("%s: revision %d, uid 0x%x\n", __func__, sc->sc_rev, uid);
aprint_normal("%s", device_xname(sc->sc_dev));
#endif
/*
* XXX minsync and maxxfer _should_ be set up in MI code,
* XXX but it appears to have some dependency on what sort
* XXX of DMA we're hooked up to, etc.
*/
/*
* This is the value used to start sync negotiations
* Note that the NCR register "SYNCTP" is programmed
* in "clocks per byte", and has a minimum value of 4.
* The SCSI period used in negotiation is one-fourth
* of the time (in nanoseconds) needed to transfer one byte.
* Since the chip's clock is given in MHz, we have the following
* formula: 4 * period = (1000 / freq) * 4
*/
sc->sc_minsync = 1000 / sc->sc_freq;
/*
* Alas, we must now modify the value a bit, because it's
* only valid when can switch on FASTCLK and FASTSCSI bits
* in config register 3...
*/
switch (sc->sc_rev) {
case NCR_VARIANT_ESP100:
sc->sc_maxxfer = 64 * 1024;
sc->sc_minsync = 0; /* No synch on old chip? */
break;
case NCR_VARIANT_ESP100A:
sc->sc_maxxfer = 64 * 1024;
/* Min clocks/byte is 5 */
sc->sc_minsync = ncr53c9x_cpb2stp(sc, 5);
break;
case NCR_VARIANT_ESP200:
case NCR_VARIANT_FAS366:
sc->sc_maxxfer = 16 * 1024 * 1024;
/* XXX - do actually set FAST* bits */
break;
}
/* Establish interrupt channel */
icookie = bus_intr_establish(esc->sc_bustag, esc->sc_pri, IPL_BIO,
ncr53c9x_intr, sc);
/* register interrupt stats */
evcnt_attach_dynamic(&sc->sc_intrcnt, EVCNT_TYPE_INTR, NULL,
device_xname(sc->sc_dev), "intr");
/* Turn on target selection using the `dma' method */
if (sc->sc_rev != NCR_VARIANT_FAS366)
sc->sc_features |= NCR_F_DMASELECT;
/* Do the common parts of attachment. */
sc->sc_adapter.adapt_minphys = minphys;
sc->sc_adapter.adapt_request = ncr53c9x_scsipi_request;
ncr53c9x_attach(sc);
}
/*
* Glue functions.
*/
#ifdef ESP_SBUS_DEBUG
int esp_sbus_debug = 0;
static struct {
char *r_name;
int r_flag;
} esp__read_regnames [] = {
{ "TCL", 0}, /* 0/00 */
{ "TCM", 0}, /* 1/04 */
{ "FIFO", 0}, /* 2/08 */
{ "CMD", 0}, /* 3/0c */
{ "STAT", 0}, /* 4/10 */
{ "INTR", 0}, /* 5/14 */
{ "STEP", 0}, /* 6/18 */
{ "FFLAGS", 1}, /* 7/1c */
{ "CFG1", 1}, /* 8/20 */
{ "STAT2", 0}, /* 9/24 */
{ "CFG4", 1}, /* a/28 */
{ "CFG2", 1}, /* b/2c */
{ "CFG3", 1}, /* c/30 */
{ "-none", 1}, /* d/34 */
{ "TCH", 1}, /* e/38 */
{ "TCX", 1}, /* f/3c */
};
static struct {
char *r_name;
int r_flag;
} esp__write_regnames[] = {
{ "TCL", 1}, /* 0/00 */
{ "TCM", 1}, /* 1/04 */
{ "FIFO", 0}, /* 2/08 */
{ "CMD", 0}, /* 3/0c */
{ "SELID", 1}, /* 4/10 */
{ "TIMEOUT", 1}, /* 5/14 */
{ "SYNCTP", 1}, /* 6/18 */
{ "SYNCOFF", 1}, /* 7/1c */
{ "CFG1", 1}, /* 8/20 */
{ "CCF", 1}, /* 9/24 */
{ "TEST", 1}, /* a/28 */
{ "CFG2", 1}, /* b/2c */
{ "CFG3", 1}, /* c/30 */
{ "-none", 1}, /* d/34 */
{ "TCH", 1}, /* e/38 */
{ "TCX", 1}, /* f/3c */
};
#endif
uint8_t
esp_read_reg(struct ncr53c9x_softc *sc, int reg)
{
struct esp_softc *esc = (struct esp_softc *)sc;
uint8_t v;
v = bus_space_read_1(esc->sc_bustag, esc->sc_reg, reg * 4);
#ifdef ESP_SBUS_DEBUG
if (esp_sbus_debug && (reg < 0x10) && esp__read_regnames[reg].r_flag)
printf("RD:%x <%s> %x\n", reg * 4,
((unsigned int)reg < 0x10) ?
esp__read_regnames[reg].r_name : "<***>", v);
#endif
return v;
}
void
esp_write_reg(struct ncr53c9x_softc *sc, int reg, uint8_t v)
{
struct esp_softc *esc = (struct esp_softc *)sc;
#ifdef ESP_SBUS_DEBUG
if (esp_sbus_debug && (reg < 0x10) && esp__write_regnames[reg].r_flag)
printf("WR:%x <%s> %x\n", reg * 4,
((unsigned int)reg < 0x10) ?
esp__write_regnames[reg].r_name : "<***>", v);
#endif
bus_space_write_1(esc->sc_bustag, esc->sc_reg, reg * 4, v);
}
uint8_t
esp_rdreg1(struct ncr53c9x_softc *sc, int reg)
{
struct esp_softc *esc = (struct esp_softc *)sc;
return bus_space_read_1(esc->sc_bustag, esc->sc_reg, reg);
}
void
esp_wrreg1(struct ncr53c9x_softc *sc, int reg, uint8_t v)
{
struct esp_softc *esc = (struct esp_softc *)sc;
bus_space_write_1(esc->sc_bustag, esc->sc_reg, reg, v);
}
int
esp_dma_isintr(struct ncr53c9x_softc *sc)
{
struct esp_softc *esc = (struct esp_softc *)sc;
return DMA_ISINTR(esc->sc_dma);
}
void
esp_dma_reset(struct ncr53c9x_softc *sc)
{
struct esp_softc *esc = (struct esp_softc *)sc;
DMA_RESET(esc->sc_dma);
}
int
esp_dma_intr(struct ncr53c9x_softc *sc)
{
struct esp_softc *esc = (struct esp_softc *)sc;
return DMA_INTR(esc->sc_dma);
}
int
esp_dma_setup(struct ncr53c9x_softc *sc, uint8_t **addr, size_t *len,
int datain, size_t *dmasize)
{
struct esp_softc *esc = (struct esp_softc *)sc;
return DMA_SETUP(esc->sc_dma, addr, len, datain, dmasize);
}
void
esp_dma_go(struct ncr53c9x_softc *sc)
{
struct esp_softc *esc = (struct esp_softc *)sc;
DMA_GO(esc->sc_dma);
}
void
esp_dma_stop(struct ncr53c9x_softc *sc)
{
struct esp_softc *esc = (struct esp_softc *)sc;
uint32_t csr;
csr = L64854_GCSR(esc->sc_dma);
csr &= ~D_EN_DMA;
L64854_SCSR(esc->sc_dma, csr);
}
int
esp_dma_isactive(struct ncr53c9x_softc *sc)
{
struct esp_softc *esc = (struct esp_softc *)sc;
return DMA_ISACTIVE(esc->sc_dma);
}
#ifdef DDB
#include <machine/db_machdep.h>
#include <ddb/db_output.h>
#include <ddb/db_command.h>
void db_esp(db_expr_t, bool, db_expr_t, const char*);
const struct db_command db_esp_command_table[] = {
{ DDB_ADD_CMD("esp", db_esp, 0,
"display status of all esp SCSI controllers and their devices",
NULL, NULL) },
{ DDB_ADD_CMD(NULL, NULL, 0, NULL, NULL, NULL) }
};
static void
esp_init_ddb_cmds(void)
{
static int db_cmds_initialized = 0;
if (db_cmds_initialized)
return;
db_cmds_initialized = 1;
(void)db_register_tbl(DDB_MACH_CMD, db_esp_command_table);
}
void
db_esp(db_expr_t addr, bool have_addr, db_expr_t count, const char *modif)
{
device_t dv;
struct ncr53c9x_softc *sc;
struct ncr53c9x_ecb *ecb;
struct ncr53c9x_linfo *li;
int u, t, i;
for (u = 0; u < 10; u++) {
dv = device_find_by_driver_unit("esp", u);
if (dv == NULL)
continue;
sc = device_private(dv);
db_printf("%s: nexus %p phase %x prev %x"
" dp %p dleft %lx ify %x\n", device_xname(dv),
sc->sc_nexus, sc->sc_phase, sc->sc_prevphase,
sc->sc_dp, sc->sc_dleft, sc->sc_msgify);
db_printf("\tmsgout %x msgpriq %x msgin %x:%x:%x:%x:%x\n",
sc->sc_msgout, sc->sc_msgpriq, sc->sc_imess[0],
sc->sc_imess[1], sc->sc_imess[2], sc->sc_imess[3],
sc->sc_imess[0]);
db_printf("ready: ");
for (ecb = TAILQ_FIRST(&sc->ready_list); ecb != NULL;
ecb = TAILQ_NEXT(ecb, chain)) {
db_printf("ecb %p ", ecb);
if (ecb == TAILQ_NEXT(ecb, chain)) {
db_printf("\nWARNING: tailq loop on ecb %p",
ecb);
break;
}
}
db_printf("\n");
for (t = 0; t < sc->sc_ntarg; t++) {
LIST_FOREACH(li, &sc->sc_tinfo[t].luns, link) {
db_printf("t%d lun %d untagged %p"
" busy %d used %x\n",
t, (int)li->lun, li->untagged, li->busy,
li->used);
for (i = 0; i < 256; i++)
ecb = li->queued[i];
if (ecb != NULL) {
db_printf("ecb %p tag %x\n",
ecb, i);
}
}
}
}
}
#endif