8b9972b9b0
added a paragraph for the non-existent (or just not in-tree) als driver -- remove that paragraph again to avoid confusion.
599 lines
15 KiB
Plaintext
599 lines
15 KiB
Plaintext
# $NetBSD: files.pci,v 1.188 2003/07/04 18:56:30 wiz Exp $
|
|
#
|
|
# Config file and device description for machine-independent PCI code.
|
|
# Included by ports that need it. Requires that the SCSI files be
|
|
# defined first.
|
|
|
|
defflag opt_pci.h PCIVERBOSE PCI_CONFIG_DUMP PCI_NETBSD_CONFIGURE
|
|
defparam opt_pci.h PCI_NETBSD_ENABLE_IDE
|
|
|
|
defflag opt_bktr.h BKTR_430_FX_MODE BKTR_GPIO_ACCESS BKTR_NO_MSP_RESET
|
|
BKTR_REVERSE_MUTE BKTR_SIS_VIA_MODE BKTR_USE_PLL
|
|
defparam opt_bktr.h BKTR_OVERRIDE_CARD BKTR_OVERRIDE_TUNER BKTR_OVERRIDE_DBX
|
|
BKTR_OVERRIDE_MSP BKTR_SYSTEM_DEFAULT
|
|
|
|
defflag opt_pciide.h PCIIDE_CMD064x_DISABLE PCIIDE_AMD756_ENABLEDMA
|
|
PCIIDE_CMD0646U_ENABLEUDMA
|
|
|
|
device pci {[dev = -1], [function = -1]}
|
|
attach pci at pcibus
|
|
file dev/pci/pci.c pci needs-flag
|
|
file dev/pci/pci_map.c pci
|
|
file dev/pci/pci_quirks.c pci
|
|
file dev/pci/pci_subr.c pci
|
|
file dev/pci/pci_usrreq.c pci
|
|
file dev/pci/pciconf.c pci & pci_netbsd_configure
|
|
|
|
# Cypress 82c693 hyperCache(tm) Stand-Alone PCI Peripheral Controller
|
|
# with USB. This is a combo chip:
|
|
#
|
|
# PCI-ISA bridge
|
|
# PCI IDE controller
|
|
# OHCI USB controller
|
|
#
|
|
# There are some common subroutines that each function needs.
|
|
define cy82c693
|
|
file dev/pci/cy82c693.c cy82c693
|
|
|
|
# Adaptec 3940, 2940, and aic78[5678]0 SCSI controllers
|
|
# device declaration in sys/conf/files
|
|
attach ahc at pci with ahc_pci: ahc_seeprom, smc93cx6
|
|
file dev/pci/ahc_pci.c ahc_pci
|
|
|
|
attach ahd at pci with ahd_pci
|
|
file dev/pci/ahd_pci.c ahd_pci
|
|
|
|
# I2O adapters
|
|
attach iop at pci with iop_pci
|
|
file dev/pci/iop_pci.c iop_pci
|
|
|
|
# 3ware RAID controllers
|
|
device twe {unit = -1}
|
|
attach twe at pci
|
|
file dev/pci/twe.c twe
|
|
|
|
attach ld at twe with ld_twe
|
|
file dev/pci/ld_twe.c ld_twe
|
|
|
|
# AMI RAID controllers
|
|
device amr {unit = -1}
|
|
attach amr at pci
|
|
file dev/pci/amr.c amr
|
|
|
|
attach ld at amr with ld_amr
|
|
file dev/pci/ld_amr.c ld_amr
|
|
|
|
# Compaq RAID controllers
|
|
attach cac at pci with cac_pci
|
|
file dev/pci/cac_pci.c cac_pci
|
|
|
|
# Mylex DAC960 RAID controllers
|
|
attach mlx at pci with mlx_pci
|
|
file dev/pci/mlx_pci.c mlx_pci
|
|
|
|
# Newer Mylex AcceleRAID and eXtremeRAID controllers
|
|
device mly: scsi
|
|
attach mly at pci
|
|
file dev/pci/mly.c mly needs-flag
|
|
|
|
# Myson-Century Technology MTD803 3-in-1 Fast Ethernet Controller
|
|
attach mtd at pci with mtd_pci
|
|
file dev/pci/if_mtd_pci.c mtd_pci
|
|
|
|
# ICP-Vortex/Intel RAID controllers
|
|
attach icp at pci with icp_pci
|
|
file dev/pci/icp_pci.c icp_pci
|
|
|
|
# Adaptec FSA RAID controllers
|
|
attach aac at pci with aac_pci
|
|
file dev/pci/aac_pci.c aac_pci
|
|
|
|
# DPT EATA SCSI controllers
|
|
attach dpt at pci with dpt_pci
|
|
file dev/pci/dpt_pci.c dpt_pci
|
|
|
|
# AdvanSys 1200A, 1200B, and ULTRA SCSI controllers
|
|
# device declaration in sys/conf/files
|
|
attach adv at pci with adv_pci
|
|
file dev/pci/adv_pci.c adv_pci
|
|
|
|
# AdvanSys ULTRA WIDE SCSI controllers
|
|
# device declaration in sys/conf/files
|
|
attach adw at pci with adw_pci
|
|
file dev/pci/adw_pci.c adw_pci
|
|
file dev/ic/adwlib.c adw_pci
|
|
file dev/ic/adwmcode.c adw_pci
|
|
|
|
# AMD Am53c974 PCscsi-PCI SCSI controllers
|
|
device pcscp: scsi, ncr53c9x
|
|
attach pcscp at pci
|
|
file dev/pci/pcscp.c pcscp
|
|
|
|
# BusLogic BT-9xx PCI family
|
|
# device declaration in sys/conf/files
|
|
attach bha at pci with bha_pci
|
|
file dev/pci/bha_pci.c bha_pci
|
|
|
|
# Qlogic ISP 10x0 (PCI) family
|
|
# device declaration in sys/conf/files
|
|
attach isp at pci with isp_pci
|
|
file dev/pci/isp_pci.c isp_pci
|
|
|
|
# LSILogic Fusion-MPT I/O Processor family
|
|
# device declaration in sys/conf/files
|
|
attach mpt at pci with mpt_pci
|
|
file dev/pci/mpt_pci.c mpt_pci
|
|
|
|
# Ethernet driver for DC21040-based boards
|
|
device de: ether, ifnet, arp
|
|
attach de at pci
|
|
file dev/pci/if_de.c de
|
|
|
|
# Efficient Networks, Inc. ATM interface
|
|
# device declaration in sys/conf/files
|
|
attach en at pci with en_pci
|
|
file dev/pci/if_en_pci.c en_pci
|
|
|
|
# 3Com 3c590 and 3c595 Ethernet controllers
|
|
# device declaration in sys/conf/files
|
|
attach ep at pci with ep_pci
|
|
file dev/pci/if_ep_pci.c ep_pci
|
|
|
|
# 3Com 3c90x[B] Ethernet controllers
|
|
# device declaration in sys/conf/files
|
|
attach ex at pci with ex_pci
|
|
file dev/pci/if_ex_pci.c ex_pci
|
|
|
|
# Digital DEFPA PCI FDDI Controller
|
|
device fpa: pdq, fddi, ifnet, arp
|
|
attach fpa at pci
|
|
file dev/pci/if_fpa.c fpa
|
|
|
|
# AMD am7990 (LANCE) -based Ethernet controllers
|
|
# device declaration in sys/conf/files
|
|
attach le at pci with le_pci: le32
|
|
file dev/pci/if_le_pci.c le_pci
|
|
|
|
# AMD PCnet-PCI Ethernet controller family
|
|
# Supersedes if_le_pci.c
|
|
device pcn: ether, ifnet, arp, mii
|
|
attach pcn at pci
|
|
file dev/pci/if_pcn.c pcn
|
|
|
|
# common code for siop/esiop pci front end
|
|
define siop_pci_common
|
|
file dev/pci/siop_pci_common.c siop_pci_common
|
|
|
|
# Symbios 53c8xx SCSI chips
|
|
# device declaration in sys/conf/files
|
|
attach siop at pci with siop_pci: siop_pci_common
|
|
file dev/pci/siop_pci.c siop_pci
|
|
attach esiop at pci with esiop_pci: siop_pci_common
|
|
file dev/pci/esiop_pci.c esiop_pci
|
|
|
|
# Initio INIC-940/950 SCSI controllers
|
|
attach iha at pci with iha_pci
|
|
file dev/pci/iha_pci.c iha_pci
|
|
|
|
# Tekram DC-395U/UW/F and DC-315/U SCSI controllers
|
|
device trm: scsi
|
|
attach trm at pci
|
|
file dev/pci/trm.c trm
|
|
|
|
# Guillemot Maxi Radio FM 2000 Radio Card
|
|
device gtp: radiodev, tea5757
|
|
attach gtp at pci
|
|
file dev/pci/gtp.c gtp
|
|
|
|
# MediaForte SoundForte SF64-PCR Radio card
|
|
#device sf4r: radiodev, tea5757
|
|
#attach sf4r at pci
|
|
#file dev/pci/sf64pcr.c sf4r
|
|
|
|
# PCI IDE controllers
|
|
device pciide {[channel = -1]}: cy82c693, wdc_base, ata, atapi
|
|
attach pciide at pci
|
|
file dev/pci/pciide.c pciide
|
|
|
|
# PCI-PCI bridge chips
|
|
device ppb: pcibus
|
|
attach ppb at pci
|
|
file dev/pci/ppb.c ppb
|
|
|
|
# Cyclades Cyclom-8/16/32
|
|
attach cy at pci with cy_pci
|
|
file dev/pci/cy_pci.c cy_pci
|
|
|
|
# Cyclades-Z series of intelligent multi-port serial adapters
|
|
device cz
|
|
attach cz at pci
|
|
file dev/pci/cz.c cz needs-flag
|
|
|
|
# Intel EtherExpress PRO 10/100B
|
|
attach fxp at pci with fxp_pci
|
|
file dev/pci/if_fxp_pci.c fxp_pci
|
|
|
|
# Sun HME-network
|
|
attach hme at pci with hme_pci
|
|
file dev/pci/if_hme_pci.c hme_pci
|
|
|
|
# Sun GEM-network
|
|
attach gem at pci with gem_pci
|
|
file dev/pci/if_gem_pci.c gem_pci
|
|
|
|
# NE2000-compatible PCI Ethernet cards
|
|
defparam opt_ipkdb.h IPKDB_NE_PCISLOT
|
|
defflag opt_ipkdb.h IPKDB_NE_PCI : IPKDB_NE
|
|
attach ne at pci with ne_pci: rtl80x9
|
|
file dev/pci/if_ne_pci.c ne_pci | ipkdb_ne_pci
|
|
|
|
# Texas Instruments ThunderLAN Chip.
|
|
device tl: ether, ifnet, arp, i2c, i2c_eeprom, mii, mii_bitbang
|
|
attach tl at pci
|
|
file dev/pci/if_tl.c tl
|
|
|
|
# SDL Communications N2 PCI Network Interface
|
|
# device declaration in sys/conf/files
|
|
attach ntwoc at pci with ntwoc_pci
|
|
file dev/pci/if_ntwoc_pci.c ntwoc_pci
|
|
|
|
# Lan Media Corporation T1/HSSI/DS3 driver
|
|
device lmc: ifnet, sppp
|
|
attach lmc at pci
|
|
file dev/pci/if_lmc.c lmc
|
|
file dev/pci/if_lmc_common.c lmc
|
|
file dev/pci/if_lmc_media.c lmc
|
|
file dev/pci/if_lmc_nbsd.c lmc
|
|
|
|
# Essential Communications HIPPI interface
|
|
# device declaration in sys/conf/files
|
|
attach esh at pci with esh_pci
|
|
file dev/pci/if_esh_pci.c esh_pci
|
|
|
|
# generic PCI VGA
|
|
attach vga at pci with vga_pci
|
|
file dev/pci/vga_pci.c vga_pci needs-flag
|
|
|
|
# DEC TGA
|
|
device tga: wsemuldisplaydev, rasops8, rasops32
|
|
attach tga at pci
|
|
file dev/pci/tga.c tga needs-flag
|
|
file dev/pci/tga_conf.c tga
|
|
file dev/ic/bt485.c tga
|
|
file dev/ic/bt463.c tga
|
|
file dev/ic/ibm561.c tga
|
|
|
|
# Integraphics Systems IGA168x and CyberPro framebuffers (linear non-VGA mode)
|
|
# device declaration in sys/conf/files
|
|
attach igsfb at pci with igsfb_pci
|
|
file dev/pci/igsfb_pci.c igsfb_pci
|
|
|
|
# Brooktree Bt848 video capture
|
|
device bktr: pcibus, radiodev
|
|
attach bktr at pci
|
|
file dev/pci/bktr/bktr_audio.c bktr
|
|
file dev/pci/bktr/bktr_card.c bktr
|
|
file dev/pci/bktr/bktr_core.c bktr
|
|
file dev/pci/bktr/bktr_os.c bktr needs-flag
|
|
file dev/pci/bktr/bktr_tuner.c bktr
|
|
|
|
# Cirrus Logic CrystalClear PCI Audio CS4280
|
|
device clcs: audiobus, auconv, mulaw, ac97, midibus
|
|
attach clcs at pci
|
|
file dev/pci/cs4280.c clcs
|
|
|
|
# Cirrus Logic CrystalClear PCI Audio CS4281
|
|
device clct: audiobus, auconv, mulaw, ac97
|
|
attach clct at pci
|
|
file dev/pci/cs4281.c clct
|
|
|
|
# Shared code for Cirrus Logic CrystalClear PCI Audio CS4280 and CS4281
|
|
file dev/pci/cs428x.c clcs | clct
|
|
|
|
# Forte Media FM801
|
|
device fms { }: audiobus, auconv, mulaw, ac97, midibus
|
|
attach fms at pci
|
|
file dev/pci/fms.c fms
|
|
|
|
attach opl at fms with opl_fms
|
|
file dev/pci/opl_fms.c opl_fms
|
|
|
|
attach mpu at fms with mpu_fms
|
|
file dev/pci/mpu_fms.c mpu_fms
|
|
|
|
# Ensoniq AudioPCI S5016
|
|
device eap: audiobus, auconv, mulaw, ac97, midibus
|
|
attach eap at pci
|
|
file dev/pci/eap.c eap
|
|
|
|
# Intel ICH AC'97 audio
|
|
device auich: audiobus, auconv, mulaw, ac97, aurateconv
|
|
attach auich at pci
|
|
file dev/pci/auich.c auich
|
|
|
|
# VIA VT82C686A/VT8233/VT8235 AC'97 Audio
|
|
device auvia: audiobus, auconv, mulaw, ac97, aurateconv
|
|
attach auvia at pci
|
|
file dev/pci/auvia.c auvia
|
|
|
|
# NeoMagic 256 AC'97 Audio
|
|
device neo: audiobus, auconv, mulaw, ac97
|
|
attach neo at pci
|
|
file dev/pci/neo.c neo
|
|
|
|
# ESS Allegro-1 / Maestro3
|
|
device esa: audiobus, auconv, mulaw, ac97
|
|
attach esa at pci
|
|
file dev/pci/esa.c esa
|
|
|
|
# ESS Solo-1 PCI AudioDrive
|
|
device eso { }: audiobus, auconv, mulaw, midibus
|
|
attach eso at pci
|
|
file dev/pci/eso.c eso
|
|
|
|
attach opl at eso with opl_eso
|
|
file dev/pci/opl_eso.c opl_eso
|
|
|
|
attach mpu at eso with mpu_eso
|
|
file dev/pci/mpu_eso.c mpu_eso
|
|
|
|
attach joy at eso with joy_eso
|
|
file dev/pci/joy_eso.c joy_eso
|
|
|
|
# ESS Maestro-1/2/2e PCI AC97 Audio Accelerator
|
|
device esm: audiobus, auconv, mulaw, ac97
|
|
attach esm at pci
|
|
file dev/pci/esm.c esm
|
|
|
|
# S3 SonicVibes (S3 617)
|
|
device sv { }: audiobus, auconv, mulaw, midibus
|
|
attach sv at pci
|
|
file dev/pci/sv.c sv
|
|
|
|
attach opl at sv with opl_sv
|
|
file dev/pci/opl_sv.c opl_sv
|
|
|
|
# C-Media CMI8x38 Audio Chip
|
|
device cmpci { }: audiobus, auconv, mulaw
|
|
attach cmpci at pci
|
|
file dev/pci/cmpci.c cmpci
|
|
|
|
attach opl at cmpci with opl_cmpci
|
|
file dev/pci/opl_cmpci.c opl_cmpci
|
|
|
|
attach mpu at cmpci with mpu_cmpci
|
|
file dev/pci/mpu_cmpci.c mpu_cmpci
|
|
|
|
# Yamaha YMF724/740/744/754 PCI audio controller
|
|
device yds { }: audiobus, auconv, mulaw, ac97
|
|
attach yds at pci
|
|
file dev/pci/yds.c yds
|
|
|
|
attach opl at yds with opl_yds
|
|
file dev/pci/opl_yds.c opl_yds
|
|
|
|
attach mpu at yds with mpu_yds
|
|
file dev/pci/mpu_yds.c mpu_yds
|
|
|
|
# Creative Labs EMU10k1 (SBLive! series and PCI512)
|
|
device emuxki: audiobus, auconv, mulaw, ac97
|
|
attach emuxki at pci
|
|
file dev/pci/emuxki.c emuxki
|
|
|
|
# Trident 4DWAVE AC'97 audio (including SiS 7018,ALi M5451)
|
|
device autri: audiobus, auconv, mulaw, ac97, midibus
|
|
attach autri at pci
|
|
file dev/pci/autri.c autri
|
|
|
|
# SMC EPIC/100 Fast Ethernet on PCI
|
|
attach epic at pci with epic_pci
|
|
file dev/pci/if_epic_pci.c epic_pci
|
|
|
|
# PCI "universal" communication device driver, for PCI com, lpt, etc. ports
|
|
# (see documentation in the driver for what, exactly, should be supported)
|
|
device puc { port = -1 }
|
|
attach puc at pci
|
|
file dev/pci/puc.c puc
|
|
file dev/pci/pucdata.c puc
|
|
|
|
attach com at puc with com_puc
|
|
file dev/pci/com_puc.c com_puc
|
|
|
|
# Console device support for puc drivers
|
|
defflag opt_puccn.h PUCCN
|
|
file dev/pci/puccn.c puccn
|
|
|
|
# XXX THE FOLLOWING BLOCK SHOULD GO INTO dev/pci/files.pci, BUT CANNOT
|
|
# XXX BECAUSE NOT 'lpt' IS DEFINED IN files.isa, RATHER THAN files.
|
|
# XXX (when the conf/files and files.isa bogons are fixed, this can
|
|
# XXX be fixed as well.)
|
|
|
|
# attach lpt at puc with lpt_puc
|
|
# file dev/pci/lpt_puc.c lpt_puc
|
|
|
|
# UHCI USB controller
|
|
attach uhci at pci with uhci_pci
|
|
file dev/pci/uhci_pci.c uhci_pci
|
|
|
|
# OHCI USB controller
|
|
attach ohci at pci with ohci_pci
|
|
file dev/pci/ohci_pci.c ohci_pci
|
|
|
|
# EHCI USB controller
|
|
attach ehci at pci with ehci_pci
|
|
file dev/pci/ehci_pci.c ehci_pci
|
|
|
|
file dev/pci/usb_pci.c ehci_pci | ehci_cardbus
|
|
|
|
# OHCI IEEE 1394 controller
|
|
attach fwohci at pci with fwohci_pci
|
|
file dev/pci/fwohci_pci.c fwohci_pci
|
|
|
|
# IEEE 1394 TI "Lynx" controller
|
|
attach fwlynx at pci with fwlynx_pci
|
|
file dev/pci/fwlynx_pci.c fwlynx_pci
|
|
|
|
# VIA Rhine/Rhine II Fast Ethernet controllers
|
|
device vr: ether, ifnet, arp, mii, mii_bitbang
|
|
attach vr at pci
|
|
file dev/pci/if_vr.c vr
|
|
|
|
# SiS 900 Fast Ethernet controllers
|
|
device sip: ether, ifnet, arp, mii
|
|
attach sip at pci
|
|
file dev/pci/if_sip.c sip
|
|
|
|
# National Semiconductor DP83820 Gigabit Ethernet
|
|
device gsip: ether, ifnet, arp, mii, mii_bitbang
|
|
attach gsip at pci
|
|
file dev/pci/if_gsip.c gsip
|
|
|
|
# Level One LXT-1001 Gigabit Ethernet
|
|
device glxt: ether, ifnet, arp, mii
|
|
attach glxt at pci
|
|
file dev/pci/if_glxt.c glxt
|
|
|
|
# Sundance Tech./Tamarack TC9021 Gigabit Ethernet
|
|
device stge: ether, ifnet, arp, mii, mii_bitbang
|
|
attach stge at pci
|
|
file dev/pci/if_stge.c stge
|
|
|
|
# SysKonnect SKNET-GE Gigabit Ethernet
|
|
device skgec { port = -1 }
|
|
attach skgec at pci
|
|
file dev/pci/if_skge.c skgec
|
|
|
|
device skge: ether, ifnet, arp, mii
|
|
attach skge at skgec
|
|
|
|
# Intel i8254x Gigabit Ethernet
|
|
device wm: ether, ifnet, arp, mii, mii_bitbang
|
|
attach wm at pci
|
|
file dev/pci/if_wm.c wm
|
|
|
|
# Broadcom 570x Gigabit Ethernet
|
|
device bge: ether, ifnet, arp, mii, mii_bitbang
|
|
attach bge at pci
|
|
file dev/pci/if_bge.c bge
|
|
|
|
# Realtek 8129/8139 Ethernet controllers
|
|
attach rtk at pci with rtk_pci
|
|
file dev/pci/if_rtk_pci.c rtk_pci
|
|
|
|
# DECchip 21x4x Ethernet controller family, and assorted clones.
|
|
attach tlp at pci with tlp_pci
|
|
file dev/pci/if_tlp_pci.c tlp_pci
|
|
|
|
# Bit3 PCI-VME mod. 617
|
|
device btvmei: vmebus
|
|
attach btvmei at pci
|
|
file dev/pci/btvmei.c btvmei
|
|
#file dev/pci/btvmei_dma.c btvmei
|
|
#file dev/pci/btvmei_cntlrdma.c btvmei
|
|
|
|
# Alteon ACEnic Gigabit Ethernet controller
|
|
device ti: ether, ifnet, arp
|
|
attach ti at pci
|
|
file dev/pci/if_ti.c ti
|
|
|
|
# Adaptec AIC-6915 Ethernet interface
|
|
attach sf at pci with sf_pci
|
|
file dev/pci/if_sf_pci.c sf_pci
|
|
|
|
# Sundance Tech. ST-201 10/100 Ethernet
|
|
device ste: ether, ifnet, arp, mii, mii_bitbang
|
|
attach ste at pci
|
|
file dev/pci/if_ste.c ste
|
|
|
|
# YENTA PCI-Cardbus bridge
|
|
#device cbb: cbbus, pcmciabus
|
|
device cbb: pcmciaslot
|
|
attach cbb at pci with cbb_pci
|
|
file dev/pci/pccbb.c cbb
|
|
|
|
# Tundra Universe PCI-VME adapter
|
|
define univ_pci
|
|
file dev/pci/universe_pci.c univ_pci
|
|
|
|
# Bit3 PCI-VME mod. 2706
|
|
device btvmeii: vmebus, univ_pci
|
|
attach btvmeii at pci
|
|
file dev/pci/btvmeii.c btvmeii
|
|
|
|
# VT86C686A power management
|
|
device viapm {}
|
|
attach viapm at pci
|
|
file dev/pci/viapm.c viapm
|
|
|
|
# hardware monitoring part of viapm
|
|
device viaenv: sysmon_envsys
|
|
attach viaenv at viapm
|
|
file dev/pci/viaenv.c viaenv needs-flag
|
|
|
|
# AMD 768MPX power management controller
|
|
defflag opt_amdpm.h AMDPM_RND_COUNTERS
|
|
device amdpm {}
|
|
attach amdpm at pci
|
|
file dev/pci/amdpm.c amdpm
|
|
|
|
# Hi/fn 7751
|
|
device hifn {}
|
|
attach hifn at pci
|
|
file dev/pci/hifn7751.c hifn
|
|
|
|
# Aironet PC4500/PC4800
|
|
attach an at pci with an_pci
|
|
file dev/pci/if_an_pci.c an_pci
|
|
|
|
# Intersil Prism2.5 Mini-PCI
|
|
attach wi at pci with wi_pci
|
|
file dev/pci/if_wi_pci.c wi_pci
|
|
|
|
# ISDN devices
|
|
attach isic at pci with isic_pci
|
|
file dev/pci/isic_pci.c isic_pci
|
|
|
|
file dev/pci/isic_pci_elsa_qs1p.c isic_pci
|
|
|
|
device ifpci: isdndev, passive_isdn, nisac
|
|
attach ifpci at pci
|
|
file dev/pci/ifpci.c ifpci
|
|
|
|
device ifritz: isdndev, passive_isdn, nisacsx
|
|
attach ifritz at pci
|
|
file dev/pci/ifpci2.c ifritz
|
|
|
|
# Winbond W6692
|
|
device iwic: isdndev, passive_isdn
|
|
attach iwic at pci with iwic_pci
|
|
file dev/pci/iwic_pci.c iwic
|
|
file dev/pci/iwic_bchan.c iwic
|
|
file dev/pci/iwic_dchan.c iwic
|
|
file dev/pci/iwic_fsm.c iwic
|
|
|
|
# IrDA devices
|
|
# Toshiba Fast Infrared Type O IrDA driver
|
|
device oboe: irbus, irdasir
|
|
attach oboe at pci
|
|
file dev/pci/oboe.c oboe
|
|
|
|
# Middle Digital, Inc. PCI-Weasel serial console board control
|
|
# devices (watchdog timer, etc.)
|
|
device weasel: sysmon_wdog
|
|
attach weasel at pci with weasel_pci
|
|
file dev/pci/weasel_pci.c weasel
|
|
|
|
# Game adapter (joystick)
|
|
attach joy at pci with joy_pci
|
|
file dev/pci/joy_pci.c joy_pci
|
|
|
|
# ATI Mach64 framebuffer console driver
|
|
device machfb: wsemuldisplaydev, rasops8
|
|
attach machfb at pci
|
|
file dev/pci/machfb.c machfb
|
|
|
|
# 3Com 3c990
|
|
device txp: ether, ifnet, arp
|
|
attach txp at pci
|
|
file dev/pci/if_txp.c txp
|