NetBSD/sys/net
matt b26f63f404 Fix pr#14481 2001-11-06 06:26:34 +00:00
..
Makefile Install net/ieee1394.h the same way we install all the other 2001-10-05 12:37:39 +00:00
bpf.c Add MI Econet support. This is lacking any interfaces to higher-layer 2001-09-10 23:11:05 +00:00
bpf.h
bpf_filter.c
bpfdesc.h
bridgestp.c Add support for building Ethernet bridges, based on Jason Wright's 2001-08-17 21:37:27 +00:00
bsd-comp.c bzero -> memset 2001-07-18 16:43:09 +00:00
dlt.h Add MI Econet support. This is lacking any interfaces to higher-layer 2001-09-10 23:11:05 +00:00
ethertypes.h Add ETHERTYPEs for MPLS (Unicast & Multicast). 2001-10-18 21:29:19 +00:00
if.c Switch to using queue access macros instead of refering to the member 2001-11-05 18:02:15 +00:00
if.h Split the pre-computed ifnet checksum flags into Tx and Rx directions. 2001-09-17 17:26:59 +00:00
if_arc.h
if_arcsubr.c unifdef OLDIP6OUTPUT 2001-10-17 08:23:05 +00:00
if_arp.h
if_atm.h
if_atmsubr.c bzero -> memset 2001-07-18 16:43:09 +00:00
if_bridge.c Only report expire time for DYNAMIC forwarding table entries. 2001-08-17 22:10:20 +00:00
if_bridgevar.h Add support for building Ethernet bridges, based on Jason Wright's 2001-08-17 21:37:27 +00:00
if_dl.h
if_eco.h Add retry mechanisms for Econet, so that if a four-way handshake doesn't 2001-09-17 22:41:59 +00:00
if_ecosubr.c Add retry mechanisms for Econet, so that if a four-way handshake doesn't 2001-09-17 22:41:59 +00:00
if_ether.h Switch to using queue access macros instead of refering to the member 2001-11-05 18:02:15 +00:00
if_ethersubr.c unifdef OLDIP6OUTPUT 2001-10-17 08:23:05 +00:00
if_faith.c bzero -> memset 2001-07-18 16:43:09 +00:00
if_faith.h
if_fddi.h
if_fddisubr.c unifdef OLDIP6OUTPUT 2001-10-17 08:23:05 +00:00
if_gif.c don't softintr_disestablish twice. 2001-09-26 07:54:19 +00:00
if_gif.h gif interface now uses generic software interrupt 2001-08-16 17:45:25 +00:00
if_gre.c
if_gre.h
if_hippi.h
if_hippisubr.c bzero -> memset 2001-07-18 16:43:09 +00:00
if_ieee1394.h
if_ieee1394subr.c
if_ieee80211.h Fix for FH infrastructure mode. 2001-09-19 04:09:54 +00:00
if_ieee80211subr.c use ALIGNED_POINTER() instead of ALIGN(). 2001-09-25 01:07:53 +00:00
if_llc.h
if_loop.c
if_media.c
if_media.h
if_ppp.c use unsigned variable types as appropriate 2001-08-05 18:07:51 +00:00
if_ppp.h
if_pppoe.c Don't call if_alloc_sadl when creating the pppoe interface, it's called 2001-10-28 09:48:20 +00:00
if_pppoe.h
if_pppvar.h
if_sl.c
if_slvar.h
if_sppp.h
if_spppsubr.c Switch to using queue access macros instead of refering to the member 2001-11-05 18:02:15 +00:00
if_stf.c Fix pr#14481 2001-11-06 06:26:34 +00:00
if_stf.h
if_strip.c
if_stripvar.h
if_token.h
if_tokensubr.c
if_tun.c Switch to using queue access macros instead of refering to the member 2001-11-05 18:02:15 +00:00
if_tun.h Turn the tun device/network interface into a cloning device. 2001-10-31 20:08:17 +00:00
if_types.h Update location of IANA smi-numbers file, since the old one doesn't work any 2001-08-23 14:52:21 +00:00
if_vlan.c
if_vlanvar.h
net_osdep.c
net_osdep.h
netisr.h The bridge driver does all forwarding at interrupt level, and 2001-10-06 15:46:33 +00:00
netisr_dispatch.h The bridge driver does all forwarding at interrupt level, and 2001-10-06 15:46:33 +00:00
pfil.c
pfil.h
pfkeyv2.h pass replay sequence number on sadb_x_sa2 (it's outside of PF_KEY standard 2001-08-02 12:10:14 +00:00
ppp-comp.h
ppp-deflate.c bzero -> memset 2001-07-18 16:43:09 +00:00
ppp_defs.h
ppp_tty.c bzero -> memset 2001-07-18 16:43:09 +00:00
radix.c
radix.h
raw_cb.c
raw_cb.h
raw_usrreq.c Switch to using queue access macros instead of refering to the member 2001-11-05 18:02:15 +00:00
route.c Switch to using queue access macros instead of refering to the member 2001-11-05 18:02:15 +00:00
route.h
rtsock.c Switch to using queue access macros instead of refering to the member 2001-11-05 18:02:15 +00:00
slcompress.c bzero -> memset 2001-07-18 16:43:09 +00:00
slcompress.h
slip.h
zlib.c Put the storage class first in an array declaration. 2001-10-14 00:39:09 +00:00
zlib.h