NetBSD/sys/dev/ic/rtl81x9var.h

304 lines
9.5 KiB
C

/* $NetBSD: rtl81x9var.h,v 1.53 2012/02/02 19:43:03 tls Exp $ */
/*
* Copyright (c) 1997, 1998
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
* FreeBSD Id: if_rlreg.h,v 1.9 1999/06/20 18:56:09 wpaul Exp
*/
#include <sys/rnd.h>
#define RTK_ETHER_ALIGN 2
#define RTK_RXSTAT_LEN 4
#ifdef __NO_STRICT_ALIGNMENT
/*
* XXX According to PR kern/33763, some 8168 and variants can't DMA
* XXX RX packet data into unaligned buffer. This means such chips will
* XXX never work on !__NO_STRICT_ALIGNMENT hosts without copying buffer.
*/
#define RE_ETHER_ALIGN 0
#else
#define RE_ETHER_ALIGN 2
#endif
struct rtk_type {
uint16_t rtk_vid;
uint16_t rtk_did;
int rtk_basetype;
#define RTK_8129 1
#define RTK_8139 2
#define RTK_8139CPLUS 3
#define RTK_8169 4
#define RTK_8168 5
#define RTK_8101E 6
const char *rtk_name;
};
struct rtk_mii_frame {
uint8_t mii_stdelim;
uint8_t mii_opcode;
uint8_t mii_phyaddr;
uint8_t mii_regaddr;
uint8_t mii_turnaround;
uint16_t mii_data;
};
/*
* MII constants
*/
#define RTK_MII_STARTDELIM 0x01
#define RTK_MII_READOP 0x02
#define RTK_MII_WRITEOP 0x01
#define RTK_MII_TURNAROUND 0x02
/*
* The RealTek doesn't use a fragment-based descriptor mechanism.
* Instead, there are only four register sets, each or which represents
* one 'descriptor.' Basically, each TX descriptor is just a contiguous
* packet buffer (32-bit aligned!) and we place the buffer addresses in
* the registers so the chip knows where they are.
*
* We can sort of kludge together the same kind of buffer management
* used in previous drivers, but we have to do buffer copies almost all
* the time, so it doesn't really buy us much.
*
* For reception, there's just one large buffer where the chip stores
* all received packets.
*/
#ifdef dreamcast
/*
* XXX dreamcast has only 32KB DMA'able memory on its PCI bridge.
* XXX Maybe this should be handled by prop_dictionary, or
* XXX some other new API which returns available DMA resources.
*/
#define RTK_RX_BUF_SZ RTK_RXBUF_16
#else
#define RTK_RX_BUF_SZ RTK_RXBUF_64
#endif
#define RTK_RXBUFLEN RTK_RXBUF_LEN(RTK_RX_BUF_SZ)
#define RTK_TX_LIST_CNT 4
/*
* The 8139C+ and 8169 gigE chips support descriptor-based TX
* and RX. In fact, they even support TCP large send. Descriptors
* must be allocated in contiguous blocks that are aligned on a
* 256-byte boundary. The RX rings can hold a maximum of 64 descriptors.
* The TX rings can hold upto 64 descriptors on 8139C+, and
* 1024 descriptors on 8169 gigE chips.
*/
#define RE_RING_ALIGN 256
/*
* Size of descriptors and TX queue.
* These numbers must be power of two to simplify RE_NEXT_*() macro.
*/
#define RE_RX_DESC_CNT 64
#define RE_TX_DESC_CNT_8139 64
#define RE_TX_DESC_CNT_8169 1024
#define RE_TX_QLEN 64
#define RE_NTXDESC_RSVD 4
struct re_rxsoft {
struct mbuf *rxs_mbuf;
bus_dmamap_t rxs_dmamap;
};
struct re_txq {
struct mbuf *txq_mbuf;
bus_dmamap_t txq_dmamap;
int txq_descidx;
int txq_nsegs;
};
struct re_list_data {
struct re_txq re_txq[RE_TX_QLEN];
int re_txq_considx;
int re_txq_prodidx;
int re_txq_free;
bus_dmamap_t re_tx_list_map;
struct re_desc *re_tx_list;
int re_tx_free; /* # of free descriptors */
int re_tx_nextfree; /* next descriptor to use */
int re_tx_desc_cnt; /* # of descriptors */
bus_dma_segment_t re_tx_listseg;
int re_tx_listnseg;
struct re_rxsoft re_rxsoft[RE_RX_DESC_CNT];
bus_dmamap_t re_rx_list_map;
struct re_desc *re_rx_list;
int re_rx_prodidx;
bus_dma_segment_t re_rx_listseg;
int re_rx_listnseg;
};
struct rtk_tx_desc {
SIMPLEQ_ENTRY(rtk_tx_desc) txd_q;
struct mbuf *txd_mbuf;
bus_dmamap_t txd_dmamap;
bus_addr_t txd_txaddr;
bus_addr_t txd_txstat;
};
struct rtk_softc {
device_t sc_dev;
struct ethercom ethercom; /* interface info */
struct mii_data mii;
struct callout rtk_tick_ch; /* tick callout */
bus_space_tag_t rtk_btag; /* bus space tag */
bus_space_handle_t rtk_bhandle; /* bus space handle */
bus_size_t rtk_bsize; /* bus space mapping size */
u_int sc_quirk; /* chip quirks */
#define RTKQ_8129 0x00000001 /* 8129 */
#define RTKQ_8139CPLUS 0x00000002 /* 8139C+ */
#define RTKQ_8169NONS 0x00000004 /* old non-single 8169 */
#define RTKQ_PCIE 0x00000008 /* PCIe variants */
#define RTKQ_MACLDPS 0x00000010 /* has LDPS register */
#define RTKQ_DESCV2 0x00000020 /* has V2 TX/RX descriptor */
#define RTKQ_NOJUMBO 0x00000040 /* no jumbo MTU support */
#define RTKQ_NOEECMD 0x00000080 /* unusable EEPROM command */
#define RTKQ_MACSTAT 0x00000100 /* set MACSTAT_DIS on init */
#define RTKQ_CMDSTOP 0x00000200 /* set STOPREQ on stop */
#define RTKQ_PHYWAKE_PM 0x00000400 /* wake PHY from power down */
bus_dma_tag_t sc_dmat;
bus_dma_segment_t sc_dmaseg; /* for rtk(4) */
int sc_dmanseg; /* for rtk(4) */
bus_dmamap_t recv_dmamap; /* for rtk(4) */
uint8_t *rtk_rx_buf;
struct rtk_tx_desc rtk_tx_descs[RTK_TX_LIST_CNT];
SIMPLEQ_HEAD(, rtk_tx_desc) rtk_tx_free;
SIMPLEQ_HEAD(, rtk_tx_desc) rtk_tx_dirty;
struct re_list_data re_ldata;
struct mbuf *re_head;
struct mbuf *re_tail;
uint32_t re_rxlenmask;
int re_testmode;
int sc_flags; /* misc flags */
#define RTK_ATTACHED 0x00000001 /* attach has succeeded */
#define RTK_ENABLED 0x00000002 /* chip is enabled */
#define RTK_IS_ENABLED(sc) ((sc)->sc_flags & RTK_ENABLED)
int sc_txthresh; /* Early tx threshold */
int sc_rev; /* MII revision */
/* Power management hooks. */
int (*sc_enable) (struct rtk_softc *);
void (*sc_disable) (struct rtk_softc *);
krndsource_t rnd_source;
};
#define RE_TX_DESC_CNT(sc) ((sc)->re_ldata.re_tx_desc_cnt)
#define RE_TX_LIST_SZ(sc) (RE_TX_DESC_CNT(sc) * sizeof(struct re_desc))
#define RE_NEXT_TX_DESC(sc, x) (((x) + 1) & (RE_TX_DESC_CNT(sc) - 1))
#define RE_RX_LIST_SZ (RE_RX_DESC_CNT * sizeof(struct re_desc))
#define RE_NEXT_RX_DESC(sc, x) (((x) + 1) & (RE_RX_DESC_CNT - 1))
#define RE_NEXT_TXQ(sc, x) (((x) + 1) & (RE_TX_QLEN - 1))
#define RE_TXDESCSYNC(sc, idx, ops) \
bus_dmamap_sync((sc)->sc_dmat, \
(sc)->re_ldata.re_tx_list_map, \
sizeof(struct re_desc) * (idx), \
sizeof(struct re_desc), \
(ops))
#define RE_RXDESCSYNC(sc, idx, ops) \
bus_dmamap_sync((sc)->sc_dmat, \
(sc)->re_ldata.re_rx_list_map, \
sizeof(struct re_desc) * (idx), \
sizeof(struct re_desc), \
(ops))
/*
* re(4) hardware ip4csum-tx could be mangled with 28 byte or less IP packets
*/
#define RE_IP4CSUMTX_MINLEN 28
#define RE_IP4CSUMTX_PADLEN (ETHER_HDR_LEN + RE_IP4CSUMTX_MINLEN)
/*
* XXX
* We are allocating pad DMA buffer after RX DMA descs for now
* because RE_TX_LIST_SZ(sc) always occupies whole page but
* RE_RX_LIST_SZ is less than PAGE_SIZE so there is some unused region.
*/
#define RE_RX_DMAMEM_SZ (RE_RX_LIST_SZ + RE_IP4CSUMTX_PADLEN)
#define RE_TXPADOFF RE_RX_LIST_SZ
#define RE_TXPADDADDR(sc) \
((sc)->re_ldata.re_rx_list_map->dm_segs[0].ds_addr + RE_TXPADOFF)
#define RTK_TXTH_MAX RTK_TXTH_1536
/*
* register space access macros
*/
#define CSR_WRITE_4(sc, reg, val) \
bus_space_write_4(sc->rtk_btag, sc->rtk_bhandle, reg, val)
#define CSR_WRITE_2(sc, reg, val) \
bus_space_write_2(sc->rtk_btag, sc->rtk_bhandle, reg, val)
#define CSR_WRITE_1(sc, reg, val) \
bus_space_write_1(sc->rtk_btag, sc->rtk_bhandle, reg, val)
#define CSR_READ_4(sc, reg) \
bus_space_read_4(sc->rtk_btag, sc->rtk_bhandle, reg)
#define CSR_READ_2(sc, reg) \
bus_space_read_2(sc->rtk_btag, sc->rtk_bhandle, reg)
#define CSR_READ_1(sc, reg) \
bus_space_read_1(sc->rtk_btag, sc->rtk_bhandle, reg)
#define RTK_TIMEOUT 1000
/*
* PCI low memory base and low I/O base registers
*/
#define RTK_PCI_LOIO 0x10
#define RTK_PCI_LOMEM 0x14
#ifdef _KERNEL
uint16_t rtk_read_eeprom(struct rtk_softc *, int, int);
void rtk_setmulti(struct rtk_softc *);
void rtk_attach(struct rtk_softc *);
int rtk_detach(struct rtk_softc *);
int rtk_activate(device_t, enum devact);
int rtk_intr(void *);
#endif /* _KERNEL */