1311 lines
31 KiB
C
1311 lines
31 KiB
C
/* $NetBSD: lpt.c,v 1.2 1996/02/15 21:33:52 mark Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1995 Mark Brinicombe
|
|
* Copyright (c) 1993, 1994 Charles Hannum.
|
|
* Copyright (c) 1990 William F. Jolitz, TeleMuse
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This software is a component of "386BSD" developed by
|
|
* William F. Jolitz, TeleMuse.
|
|
* 4. Neither the name of the developer nor the name "386BSD"
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS A COMPONENT OF 386BSD DEVELOPED BY WILLIAM F. JOLITZ
|
|
* AND IS INTENDED FOR RESEARCH AND EDUCATIONAL PURPOSES ONLY. THIS
|
|
* SOFTWARE SHOULD NOT BE CONSIDERED TO BE A COMMERCIAL PRODUCT.
|
|
* THE DEVELOPER URGES THAT USERS WHO REQUIRE A COMMERCIAL PRODUCT
|
|
* NOT MAKE USE OF THIS WORK.
|
|
*
|
|
* FOR USERS WHO WISH TO UNDERSTAND THE 386BSD SYSTEM DEVELOPED
|
|
* BY WILLIAM F. JOLITZ, WE RECOMMEND THE USER STUDY WRITTEN
|
|
* REFERENCES SUCH AS THE "PORTING UNIX TO THE 386" SERIES
|
|
* (BEGINNING JANUARY 1991 "DR. DOBBS JOURNAL", USA AND BEGINNING
|
|
* JUNE 1991 "UNIX MAGAZIN", GERMANY) BY WILLIAM F. JOLITZ AND
|
|
* LYNNE GREER JOLITZ, AS WELL AS OTHER BOOKS ON UNIX AND THE
|
|
* ON-LINE 386BSD USER MANUAL BEFORE USE. A BOOK DISCUSSING THE INTERNALS
|
|
* OF 386BSD ENTITLED "386BSD FROM THE INSIDE OUT" WILL BE AVAILABLE LATE 1992.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE DEVELOPER ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE DEVELOPER BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* from:$NetBSD: lpt.c,v 1.2 1996/02/15 21:33:52 mark Exp $
|
|
* $Id: lpt.c,v 1.2 1996/02/15 21:33:52 mark Exp $
|
|
*/
|
|
|
|
/*
|
|
* Device Driver for AT parallel printer port
|
|
*/
|
|
/*
|
|
* PLIP driver code added by Mark Brinicombe
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/user.h>
|
|
#include <sys/buf.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/uio.h>
|
|
#include <sys/device.h>
|
|
#include <sys/syslog.h>
|
|
|
|
#if defined(INET) && defined(PLIP)
|
|
#include <sys/mbuf.h>
|
|
#include <sys/socket.h>
|
|
#include <net/if.h>
|
|
#include <net/if_types.h>
|
|
#include <net/netisr.h>
|
|
#include <net/route.h>
|
|
#include <netinet/in.h>
|
|
#include <netinet/in_systm.h>
|
|
#include <netinet/in_var.h>
|
|
#include <netinet/ip.h>
|
|
#include <netinet/if_ether.h>
|
|
#include "bpfilter.h"
|
|
#if NBPFILTER > 0
|
|
#include <sys/time.h>
|
|
#include <net/bpf.h>
|
|
#endif
|
|
#endif
|
|
|
|
#include <machine/cpu.h>
|
|
#include <machine/katelib.h>
|
|
#include <machine/irqhandler.h>
|
|
#include <machine/io.h>
|
|
#include <arm32/mainbus/lptreg.h>
|
|
#include <arm32/mainbus/mainbus.h>
|
|
|
|
#define inb ReadByte
|
|
#define outb WriteByte
|
|
|
|
#define TIMEOUT hz*16 /* wait up to 16 seconds for a ready */
|
|
#define STEP hz/4
|
|
|
|
#define LPTPRI (PZERO+8)
|
|
#define LPT_BSIZE 1024
|
|
|
|
#if defined(INET) && defined(PLIP)
|
|
#ifndef PLIPMTU /* MTU for the plip# interfaces */
|
|
#if defined(COMPAT_PLIP10)
|
|
#define PLIPMTU 1600
|
|
#else
|
|
#define PLIPMTU (ETHERMTU - ifp->if_hdrlen)
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef PLIPMXSPIN1 /* DELAY factor for the plip# interfaces */
|
|
#define PLIPMXSPIN1 2000 /* Spinning for remote intr to happen */
|
|
#endif
|
|
|
|
#ifndef PLIPMXSPIN2 /* DELAY factor for the plip# interfaces */
|
|
#define PLIPMXSPIN2 6000 /* Spinning for remote handshake to happen */
|
|
#endif
|
|
|
|
#ifndef PLIPMXERRS /* Max errors before !RUNNING */
|
|
#define PLIPMXERRS 100
|
|
#endif
|
|
#ifndef PLIPMXRETRY
|
|
#define PLIPMXRETRY 10 /* Max number of retransmits */
|
|
#endif
|
|
#ifndef PLIPRETRY
|
|
#define PLIPRETRY hz/10 /* Time between retransmits */
|
|
#endif
|
|
#endif
|
|
|
|
#if !defined(DEBUG) || !defined(notdef)
|
|
#define lprintf
|
|
#else
|
|
#define lprintf if (lptdebug) printf
|
|
int lptdebug = 1;
|
|
#endif
|
|
|
|
struct lpt_softc {
|
|
struct device sc_dev;
|
|
irqhandler_t sc_ih;
|
|
|
|
size_t sc_count;
|
|
struct buf *sc_inbuf;
|
|
u_char *sc_cp;
|
|
int sc_spinmax;
|
|
int sc_iobase;
|
|
int sc_irq;
|
|
u_char sc_state;
|
|
#define LPT_OPEN 0x01 /* device is open */
|
|
#define LPT_OBUSY 0x02 /* printer is busy doing output */
|
|
#define LPT_INIT 0x04 /* waiting to initialize for open */
|
|
#define LPT_PLIP 0x08 /* busy with PLIP */
|
|
u_char sc_flags;
|
|
#define LPT_AUTOLF 0x20 /* automatic LF on CR */
|
|
#define LPT_NOPRIME 0x40 /* don't prime on open */
|
|
#define LPT_NOINTR 0x80 /* do not use interrupt */
|
|
u_char sc_control;
|
|
u_char sc_laststatus;
|
|
#if defined(INET) && defined(PLIP)
|
|
struct arpcom sc_arpcom;
|
|
u_char *sc_ifbuf;
|
|
int sc_iferrs;
|
|
int sc_ifretry;
|
|
#if defined(COMPAT_PLIP10)
|
|
u_char sc_adrcksum;
|
|
#endif
|
|
#endif
|
|
};
|
|
|
|
int lptprobe __P((struct device *, void *, void *));
|
|
void lptattach __P((struct device *, struct device *, void *));
|
|
int lptintr __P((void *));
|
|
|
|
#if defined(INET) && defined(PLIP)
|
|
/* Functions for the plip# interface */
|
|
static void plipattach(struct lpt_softc *,int);
|
|
static int plipioctl(struct ifnet *, u_long, caddr_t);
|
|
static void plipstart(struct ifnet *);
|
|
static int plipintr(struct lpt_softc *);
|
|
#endif
|
|
|
|
struct cfdriver lptcd = {
|
|
NULL, "lpt", lptprobe, lptattach, DV_TTY, sizeof(struct lpt_softc)
|
|
};
|
|
|
|
#define LPTUNIT(s) (minor(s) & 0x1f)
|
|
#define LPTFLAGS(s) (minor(s) & 0xe0)
|
|
|
|
#define LPS_INVERT (LPS_SELECT|LPS_NERR|LPS_NBSY|LPS_NACK)
|
|
#define LPS_MASK (LPS_SELECT|LPS_NERR|LPS_NBSY|LPS_NACK|LPS_NOPAPER)
|
|
#define NOT_READY() ((inb(iobase + lpt_status) ^ LPS_INVERT) & LPS_MASK)
|
|
#define NOT_READY_ERR() not_ready(inb(iobase + lpt_status), sc)
|
|
static int not_ready __P((u_char, struct lpt_softc *));
|
|
|
|
static void lptwakeup __P((void *arg));
|
|
static int pushbytes __P((struct lpt_softc *));
|
|
|
|
/*
|
|
* Internal routine to lptprobe to do port tests of one byte value.
|
|
*/
|
|
int
|
|
lpt_port_test(port, data, mask)
|
|
int port;
|
|
u_char data, mask;
|
|
{
|
|
int timeout;
|
|
u_char temp;
|
|
|
|
data &= mask;
|
|
outb(port, data);
|
|
timeout = 1000;
|
|
do {
|
|
delay(10);
|
|
temp = inb(port) & mask;
|
|
} while (temp != data && --timeout);
|
|
lprintf("lpt: port=0x%x out=0x%x in=0x%x timeout=%d\n", port, data,
|
|
temp, timeout);
|
|
return (temp == data);
|
|
}
|
|
|
|
/*
|
|
* Logic:
|
|
* 1) You should be able to write to and read back the same value
|
|
* to the data port. Do an alternating zeros, alternating ones,
|
|
* walking zero, and walking one test to check for stuck bits.
|
|
*
|
|
* 2) You should be able to write to and read back the same value
|
|
* to the control port lower 5 bits, the upper 3 bits are reserved
|
|
* per the IBM PC technical reference manauls and different boards
|
|
* do different things with them. Do an alternating zeros, alternating
|
|
* ones, walking zero, and walking one test to check for stuck bits.
|
|
*
|
|
* Some printers drag the strobe line down when the are powered off
|
|
* so this bit has been masked out of the control port test.
|
|
*
|
|
* XXX Some printers may not like a fast pulse on init or strobe, I
|
|
* don't know at this point, if that becomes a problem these bits
|
|
* should be turned off in the mask byte for the control port test.
|
|
*
|
|
* 3) Set the data and control ports to a value of 0
|
|
*/
|
|
int
|
|
lptprobe(parent, match, aux)
|
|
struct device *parent;
|
|
void *match, *aux;
|
|
{
|
|
struct mainbus_attach_args *mb = aux;
|
|
int iobase = mb->mb_iobase;
|
|
int port;
|
|
u_char mask, data;
|
|
int i;
|
|
|
|
#ifdef DEBUG
|
|
#define ABORT do {printf("lptprobe: mask %x data %x failed\n", mask, data); \
|
|
return 0;} while (0)
|
|
#else
|
|
#define ABORT return 0
|
|
#endif
|
|
|
|
port = iobase + lpt_data;
|
|
mask = 0xff;
|
|
|
|
data = 0x55; /* Alternating zeros */
|
|
if (!lpt_port_test(port, data, mask))
|
|
ABORT;
|
|
|
|
data = 0xaa; /* Alternating ones */
|
|
if (!lpt_port_test(port, data, mask))
|
|
ABORT;
|
|
|
|
for (i = 0; i < CHAR_BIT; i++) { /* Walking zero */
|
|
data = ~(1 << i);
|
|
if (!lpt_port_test(port, data, mask))
|
|
ABORT;
|
|
}
|
|
|
|
for (i = 0; i < CHAR_BIT; i++) { /* Walking one */
|
|
data = (1 << i);
|
|
if (!lpt_port_test(port, data, mask))
|
|
ABORT;
|
|
}
|
|
|
|
outb(iobase + lpt_data, 0);
|
|
outb(iobase + lpt_control, 0);
|
|
|
|
mb->mb_iosize = LPT_NPORTS;
|
|
return 1;
|
|
}
|
|
|
|
void
|
|
lptattach(parent, self, aux)
|
|
struct device *parent, *self;
|
|
void *aux;
|
|
{
|
|
struct lpt_softc *sc = (void *)self;
|
|
struct mainbus_attach_args *mb = aux;
|
|
int iobase = mb->mb_iobase;
|
|
|
|
if (mb->mb_irq != IRQUNK)
|
|
printf("\n");
|
|
else
|
|
printf(": polled\n");
|
|
|
|
sc->sc_iobase = iobase;
|
|
sc->sc_irq = mb->mb_irq;
|
|
sc->sc_state = 0;
|
|
outb(iobase + lpt_control, LPC_NINIT);
|
|
|
|
if (mb->mb_irq != IRQUNK) {
|
|
sc->sc_ih.ih_func = lptintr;
|
|
sc->sc_ih.ih_arg = sc;
|
|
#if defined(INET) && defined(PLIP)
|
|
sc->sc_ih.ih_level = IPL_NET;
|
|
plipattach(sc, self->dv_unit);
|
|
#else
|
|
sc->sc_ih.ih_level = IPL_NONE;
|
|
#endif
|
|
irq_claim(mb->mb_irq, &sc->sc_ih);
|
|
}
|
|
#if defined(INET) && defined(PLIP)
|
|
else {
|
|
printf("Warning PLIP device needs IRQ driven lpt driver\n");
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Reset the printer, then wait until it's selected and not busy.
|
|
*/
|
|
int
|
|
lptopen(dev, flag)
|
|
dev_t dev;
|
|
int flag;
|
|
{
|
|
int unit = LPTUNIT(dev);
|
|
u_char flags = LPTFLAGS(dev);
|
|
struct lpt_softc *sc;
|
|
int iobase;
|
|
u_char control;
|
|
int error;
|
|
int spin;
|
|
|
|
if (unit >= lptcd.cd_ndevs)
|
|
return ENXIO;
|
|
sc = lptcd.cd_devs[unit];
|
|
if (!sc)
|
|
return ENXIO;
|
|
|
|
if (sc->sc_irq == IRQUNK && (flags & LPT_NOINTR) == 0)
|
|
return ENXIO;
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (sc->sc_state)
|
|
printf("%s: stat=0x%x not zero\n", sc->sc_dev.dv_xname,
|
|
sc->sc_state);
|
|
#endif
|
|
|
|
if (sc->sc_state)
|
|
return EBUSY;
|
|
|
|
sc->sc_state = LPT_INIT;
|
|
sc->sc_flags = flags;
|
|
lprintf("%s: open: flags=0x%x\n", sc->sc_dev.dv_xname, flags);
|
|
iobase = sc->sc_iobase;
|
|
|
|
if ((flags & LPT_NOPRIME) == 0) {
|
|
/* assert INIT for 100 usec to start up printer */
|
|
outb(iobase + lpt_control, LPC_SELECT);
|
|
delay(100);
|
|
}
|
|
|
|
control = LPC_SELECT | LPC_NINIT;
|
|
outb(iobase + lpt_control, control);
|
|
|
|
/* wait till ready (printer running diagnostics) */
|
|
for (spin = 0; NOT_READY_ERR(); spin += STEP) {
|
|
if (spin >= TIMEOUT) {
|
|
sc->sc_state = 0;
|
|
return EBUSY;
|
|
}
|
|
|
|
/* wait 1/4 second, give up if we get a signal */
|
|
if (error = tsleep((caddr_t)sc, LPTPRI | PCATCH, "lptopen",
|
|
STEP) != EWOULDBLOCK) {
|
|
sc->sc_state = 0;
|
|
return error;
|
|
}
|
|
}
|
|
|
|
if ((flags & LPT_NOINTR) == 0)
|
|
control |= LPC_IENABLE;
|
|
if (flags & LPT_AUTOLF)
|
|
control |= LPC_AUTOLF;
|
|
sc->sc_control = control;
|
|
outb(iobase + lpt_control, control);
|
|
|
|
sc->sc_inbuf = geteblk(LPT_BSIZE);
|
|
sc->sc_count = 0;
|
|
sc->sc_state = LPT_OPEN;
|
|
|
|
if ((sc->sc_flags & LPT_NOINTR) == 0)
|
|
lptwakeup(sc);
|
|
|
|
lprintf("%s: opened\n", sc->sc_dev.dv_xname);
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
not_ready(status, sc)
|
|
u_char status;
|
|
struct lpt_softc *sc;
|
|
{
|
|
u_char new;
|
|
|
|
status = (status ^ LPS_INVERT) & LPS_MASK;
|
|
new = status & ~sc->sc_laststatus;
|
|
sc->sc_laststatus = status;
|
|
|
|
if (new & LPS_SELECT)
|
|
log(LOG_NOTICE, "%s: offline\n", sc->sc_dev.dv_xname);
|
|
else if (new & LPS_NOPAPER)
|
|
log(LOG_NOTICE, "%s: out of paper\n", sc->sc_dev.dv_xname);
|
|
else if (new & LPS_NERR)
|
|
log(LOG_NOTICE, "%s: output error\n", sc->sc_dev.dv_xname);
|
|
|
|
return status;
|
|
}
|
|
|
|
|
|
void
|
|
lptwakeup(arg)
|
|
void *arg;
|
|
{
|
|
struct lpt_softc *sc = arg;
|
|
int s;
|
|
|
|
s = spltty();
|
|
lptintr(sc);
|
|
splx(s);
|
|
|
|
timeout(lptwakeup, sc, STEP);
|
|
}
|
|
|
|
/*
|
|
* Close the device, and free the local line buffer.
|
|
*/
|
|
lptclose(dev, flag)
|
|
dev_t dev;
|
|
int flag;
|
|
{
|
|
int unit = LPTUNIT(dev);
|
|
struct lpt_softc *sc = lptcd.cd_devs[unit];
|
|
int iobase = sc->sc_iobase;
|
|
|
|
if (sc->sc_count)
|
|
(void) pushbytes(sc);
|
|
|
|
if ((sc->sc_flags & LPT_NOINTR) == 0)
|
|
untimeout(lptwakeup, sc);
|
|
|
|
outb(iobase + lpt_control, LPC_NINIT);
|
|
sc->sc_state = 0;
|
|
outb(iobase + lpt_control, LPC_NINIT);
|
|
brelse(sc->sc_inbuf);
|
|
|
|
lprintf("%s: closed\n", sc->sc_dev.dv_xname);
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
pushbytes(sc)
|
|
struct lpt_softc *sc;
|
|
{
|
|
int iobase = sc->sc_iobase;
|
|
int error;
|
|
|
|
if (sc->sc_flags & LPT_NOINTR) {
|
|
int spin, tic;
|
|
u_char control = sc->sc_control;
|
|
|
|
while (sc->sc_count > 0) {
|
|
spin = 0;
|
|
while (NOT_READY()) {
|
|
if (++spin < sc->sc_spinmax)
|
|
continue;
|
|
tic = 0;
|
|
/* adapt busy-wait algorithm */
|
|
sc->sc_spinmax++;
|
|
while (NOT_READY_ERR()) {
|
|
/* exponential backoff */
|
|
tic = tic + tic + 1;
|
|
if (tic > TIMEOUT)
|
|
tic = TIMEOUT;
|
|
error = tsleep((caddr_t)sc,
|
|
LPTPRI | PCATCH, "lptpsh", tic);
|
|
if (error != EWOULDBLOCK)
|
|
return error;
|
|
}
|
|
break;
|
|
}
|
|
|
|
outb(iobase + lpt_data, *sc->sc_cp++);
|
|
outb(iobase + lpt_control, control | LPC_STROBE);
|
|
sc->sc_count--;
|
|
outb(iobase + lpt_control, control);
|
|
|
|
/* adapt busy-wait algorithm */
|
|
if (spin*2 + 16 < sc->sc_spinmax)
|
|
sc->sc_spinmax--;
|
|
}
|
|
} else {
|
|
int s;
|
|
|
|
while (sc->sc_count > 0) {
|
|
/* if the printer is ready for a char, give it one */
|
|
if ((sc->sc_state & LPT_OBUSY) == 0) {
|
|
lprintf("%s: write %d\n", sc->sc_dev.dv_xname,
|
|
sc->sc_count);
|
|
s = spltty();
|
|
(void) lptintr(sc);
|
|
splx(s);
|
|
}
|
|
if (error = tsleep((caddr_t)sc, LPTPRI | PCATCH,
|
|
"lptwrite2", 0))
|
|
return error;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Copy a line from user space to a local buffer, then call putc to get the
|
|
* chars moved to the output queue.
|
|
*/
|
|
lptwrite(dev, uio)
|
|
dev_t dev;
|
|
struct uio *uio;
|
|
{
|
|
struct lpt_softc *sc = lptcd.cd_devs[LPTUNIT(dev)];
|
|
size_t n;
|
|
int error = 0;
|
|
|
|
while (n = min(LPT_BSIZE, uio->uio_resid)) {
|
|
uiomove(sc->sc_cp = sc->sc_inbuf->b_data, n, uio);
|
|
sc->sc_count = n;
|
|
error = pushbytes(sc);
|
|
if (error) {
|
|
/*
|
|
* Return accurate residual if interrupted or timed
|
|
* out.
|
|
*/
|
|
uio->uio_resid += sc->sc_count;
|
|
sc->sc_count = 0;
|
|
return error;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Handle printer interrupts which occur when the printer is ready to accept
|
|
* another char.
|
|
*/
|
|
int
|
|
lptintr(arg)
|
|
void *arg;
|
|
{
|
|
struct lpt_softc *sc = arg;
|
|
int iobase = sc->sc_iobase;
|
|
|
|
/*printf("lptintr:\n");*/
|
|
|
|
#if defined(INET) && defined(PLIP)
|
|
if (sc->sc_arpcom.ac_if.if_flags & IFF_UP) {
|
|
return(plipintr(sc));
|
|
}
|
|
#endif
|
|
|
|
#if 0
|
|
if ((sc->sc_state & LPT_OPEN) == 0)
|
|
return 0;
|
|
#endif
|
|
|
|
/* is printer online and ready for output */
|
|
if (NOT_READY() && NOT_READY_ERR())
|
|
return 0;
|
|
|
|
if (sc->sc_count) {
|
|
u_char control = sc->sc_control;
|
|
/* send char */
|
|
outb(iobase + lpt_data, *sc->sc_cp++);
|
|
outb(iobase + lpt_control, control | LPC_STROBE);
|
|
sc->sc_count--;
|
|
outb(iobase + lpt_control, control);
|
|
sc->sc_state |= LPT_OBUSY;
|
|
} else
|
|
sc->sc_state &= ~LPT_OBUSY;
|
|
|
|
if (sc->sc_count == 0) {
|
|
/* none, wake up the top half to get more */
|
|
wakeup((caddr_t)sc);
|
|
}
|
|
|
|
return(1);
|
|
}
|
|
|
|
int
|
|
lptioctl(dev, cmd, data, flag)
|
|
dev_t dev;
|
|
u_long cmd;
|
|
caddr_t data;
|
|
int flag;
|
|
{
|
|
int error = 0;
|
|
|
|
switch (cmd) {
|
|
default:
|
|
error = ENODEV;
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
|
|
#if defined(INET) && defined(PLIP)
|
|
|
|
#define PLIP_INTR_ENABLE (LPC_NINIT | LPC_SELECT | LPC_IENABLE)
|
|
#define PLIP_INTR_DISABLE (LPC_NINIT | LPC_SELECT)
|
|
#define PLIP_DATA (iobase + lpt_data)
|
|
#define PLIP_STATUS (iobase + lpt_status)
|
|
#define PLIP_CONTROL (iobase + lpt_control)
|
|
#define PLIP_REMOTE_TRIGGER 0x08
|
|
#define PLIP_DELAY_UNIT 50
|
|
#if PLIP_DELAY_UNIT > 0
|
|
#define PLIP_DELAY DELAY(PLIP_DELAY_UNIT)
|
|
#else
|
|
#define PLIP_DELAY
|
|
#endif
|
|
#define PLIP_DEBUG_RX 0x01
|
|
#define PLIP_DEBUG_TX 0x02
|
|
#define PLIP_DEBUG_IF 0x04
|
|
#define PLIP_DEBUG 0x07
|
|
#if PLIP_DEBUG != 0
|
|
static int plip_debug = PLIP_DEBUG;
|
|
#endif
|
|
|
|
static void
|
|
plipattach(struct lpt_softc *sc, int unit)
|
|
{
|
|
struct ifnet *ifp = &sc->sc_arpcom.ac_if;
|
|
|
|
sc->sc_ifbuf = NULL;
|
|
ifp->if_unit = unit;
|
|
ifp->if_name = "plip";
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS;
|
|
ifp->if_output = ether_output;
|
|
ifp->if_start = plipstart;
|
|
ifp->if_ioctl = plipioctl;
|
|
ifp->if_watchdog = 0;
|
|
|
|
ifp->if_type = IFT_ETHER;
|
|
ifp->if_addrlen = 6;
|
|
ifp->if_hdrlen = 14;
|
|
ifp->if_mtu = PLIPMTU;
|
|
|
|
if_attach(ifp);
|
|
ether_ifattach(ifp);
|
|
|
|
printf("plip%d at lpt%d: mtu=%d,%d,%d", unit, unit, (int) ifp->if_mtu,
|
|
ifp->if_hdrlen, ifp->if_addrlen);
|
|
if (sizeof(struct ether_header) != 14)
|
|
printf(" ethhdr super kludge mode enabled\n");
|
|
else
|
|
printf("\n");
|
|
|
|
#if NBPFILTER > 0
|
|
bpfattach(&ifp->if_bpf, ifp, DLT_EN10MB, sizeof(struct ether_header));
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Process an ioctl request.
|
|
*/
|
|
static int
|
|
plipioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
|
|
{
|
|
struct proc *p = curproc;
|
|
struct lpt_softc *sc = (struct lpt_softc *) lptcd.cd_devs[ifp->if_unit];
|
|
unsigned int iobase = sc->sc_iobase;
|
|
struct ifaddr *ifa = (struct ifaddr *)data;
|
|
struct ifreq *ifr = (struct ifreq *)data;
|
|
int s;
|
|
int error = 0;
|
|
|
|
#if PLIP_DEBUG > 0
|
|
printf("plipioctl: cmd=%08x ifp=%08x data=%08x\n", cmd, ifp, data);
|
|
printf("plipioctl: ifp->flags=%08x\n", ifp->if_flags);
|
|
#endif
|
|
|
|
switch (cmd) {
|
|
|
|
case SIOCSIFFLAGS:
|
|
if (((ifp->if_flags & IFF_UP) == 0) &&
|
|
(ifp->if_flags & IFF_RUNNING)) {
|
|
ifp->if_flags &= ~IFF_RUNNING;
|
|
/* Deactive the parallel port */
|
|
#if PLIP_DEBUG != 0
|
|
if (plip_debug & PLIP_DEBUG_IF)
|
|
printf("plip: Disabling lpt irqs\n");
|
|
#endif
|
|
outb(PLIP_DATA, 0x00);
|
|
outb(PLIP_CONTROL, PLIP_INTR_DISABLE);
|
|
sc->sc_state = 0;
|
|
|
|
if (sc->sc_ifbuf)
|
|
free(sc->sc_ifbuf, M_DEVBUF);
|
|
|
|
sc->sc_ifbuf = NULL;
|
|
}
|
|
if (((ifp->if_flags & IFF_UP)) &&
|
|
((ifp->if_flags & IFF_RUNNING) == 0)) {
|
|
if (sc->sc_state) {
|
|
error = EBUSY;
|
|
break;
|
|
}
|
|
/* if (!(ifp->if_flags & IFF_DEBUG))
|
|
plip_debug = PLIP_DEBUG;
|
|
else
|
|
plip_debug = 0;*/
|
|
sc->sc_state = LPT_OPEN | LPT_PLIP;
|
|
if (!sc->sc_ifbuf)
|
|
sc->sc_ifbuf =
|
|
malloc(ifp->if_mtu + ifp->if_hdrlen,
|
|
M_DEVBUF, M_WAITOK);
|
|
ifp->if_flags |= IFF_RUNNING;
|
|
/* This starts it running */
|
|
/* Enable lpt interrupts */
|
|
|
|
#if PLIP_DEBUG != 0
|
|
if (plip_debug & PLIP_DEBUG_IF)
|
|
printf("plip: Enabling lpt irqs\n");
|
|
#endif
|
|
outb(PLIP_CONTROL, PLIP_INTR_ENABLE);
|
|
outb(PLIP_DATA, 0x00);
|
|
}
|
|
break;
|
|
|
|
case SIOCSIFADDR:
|
|
if (ifa->ifa_addr->sa_family == AF_INET) {
|
|
if (!sc->sc_ifbuf)
|
|
sc->sc_ifbuf =
|
|
malloc(PLIPMTU + ifp->if_hdrlen,
|
|
M_DEVBUF, M_WAITOK);
|
|
|
|
sc->sc_arpcom.ac_enaddr[0] = 0xfc;
|
|
sc->sc_arpcom.ac_enaddr[1] = 0xfc;
|
|
bcopy((caddr_t)&IA_SIN(ifa)->sin_addr,
|
|
(caddr_t)&sc->sc_arpcom.ac_enaddr[2], 4);
|
|
sc->sc_arpcom.ac_ipaddr = IA_SIN(ifa)->sin_addr;
|
|
#if defined(COMPAT_PLIP10)
|
|
if (ifp->if_flags & IFF_LINK0) {
|
|
int i;
|
|
sc->sc_arpcom.ac_enaddr[0] = 0xfd;
|
|
sc->sc_arpcom.ac_enaddr[1] = 0xfd;
|
|
for (i = sc->sc_adrcksum = 0; i < 5; i++)
|
|
sc->sc_adrcksum += sc->sc_arpcom.ac_enaddr[i];
|
|
sc->sc_adrcksum *= 2;
|
|
}
|
|
#endif
|
|
ifp->if_flags |= IFF_RUNNING | IFF_UP;
|
|
#if 0
|
|
for (ifa = ifp->if_addrlist; ifa; ifa = ifa->ifa_next) {
|
|
struct sockaddr_dl *sdl;
|
|
if ((sdl = (struct sockaddr_dl *)ifa->ifa_addr) &&
|
|
sdl->sdl_family == AF_LINK) {
|
|
sdl->sdl_type = IFT_ETHER;
|
|
sdl->sdl_alen = ifp->if_addrlen;
|
|
bcopy((caddr_t)((struct arpcom *)ifp)->ac_enaddr,
|
|
LLADDR(sdl), ifp->if_addrlen);
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
/* Looks the same as the start condition above */
|
|
/* Enable lpt interrupts */
|
|
|
|
#if PLIP_DEBUG != 0
|
|
if (plip_debug & PLIP_DEBUG_IF)
|
|
printf("plip: Enabling lpt irqs\n");
|
|
#endif
|
|
outb(PLIP_CONTROL, PLIP_INTR_ENABLE);
|
|
outb(PLIP_DATA, 0x00);
|
|
|
|
arp_ifinit(&sc->sc_arpcom, ifa);
|
|
} else
|
|
error = EAFNOSUPPORT;
|
|
break;
|
|
|
|
case SIOCAIFADDR:
|
|
case SIOCDIFADDR:
|
|
case SIOCSIFDSTADDR:
|
|
if (ifa->ifa_addr->sa_family != AF_INET)
|
|
error = EAFNOSUPPORT;
|
|
break;
|
|
|
|
case SIOCSIFMTU:
|
|
if ((error = suser(p->p_ucred, &p->p_acflag)))
|
|
return(error);
|
|
if (ifp->if_mtu != ifr->ifr_metric) {
|
|
ifp->if_mtu = ifr->ifr_metric;
|
|
if (sc->sc_ifbuf) {
|
|
s = splimp();
|
|
|
|
free(sc->sc_ifbuf, M_DEVBUF);
|
|
sc->sc_ifbuf =
|
|
malloc(ifp->if_mtu + ifp->if_hdrlen,
|
|
M_DEVBUF, M_WAITOK);
|
|
splx(s);
|
|
}
|
|
}
|
|
break;
|
|
|
|
case SIOCGIFMTU:
|
|
ifr->ifr_metric = ifp->if_mtu;
|
|
break;
|
|
|
|
default:
|
|
error = EINVAL;
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
plipreceive(unsigned int iobase, u_char *buf, int len)
|
|
{
|
|
int i;
|
|
u_char cksum = 0, c;
|
|
u_char c0, c1;
|
|
|
|
#if PLIP_DEBUG != 0
|
|
if (plip_debug & PLIP_DEBUG_RX)
|
|
printf("Rx: ");
|
|
#endif
|
|
|
|
while (len--) {
|
|
i = PLIPMXSPIN2;
|
|
/* Receive a byte */
|
|
|
|
/* Wait for a steady handshake */
|
|
while (1) {
|
|
c0 = inb(PLIP_STATUS);
|
|
if ((c0 & LPS_NBSY) == 0) {
|
|
c1 = inb(PLIP_STATUS);
|
|
if (c0 == c1) break;
|
|
#if PLIP_DEBUG != 0
|
|
if (plip_debug & PLIP_DEBUG_RX)
|
|
printf("rx: %02x-%02x ", c0, c1);
|
|
#endif
|
|
}
|
|
--i;
|
|
if (i < 0) {
|
|
#if PLIP_DEBUG > 0
|
|
printf("timeout rx lsn %02x\n", c0);
|
|
#endif
|
|
return(-1);
|
|
}
|
|
PLIP_DELAY;
|
|
}
|
|
c = (c0 >> 3) & 0x0f;
|
|
|
|
/* Acknowledge */
|
|
outb(PLIP_DATA, 0x10);
|
|
|
|
/* Another handshake */
|
|
i = PLIPMXSPIN2;
|
|
while (1) {
|
|
c0 = inb(PLIP_STATUS);
|
|
if (c0 & LPS_NBSY) {
|
|
c1 = inb(PLIP_STATUS);
|
|
if (c0 == c1) break;
|
|
#if PLIP_DEBUG != 0
|
|
if (plip_debug & PLIP_DEBUG_RX)
|
|
printf("rx: %02x-%02x ", c0, c1);
|
|
#endif
|
|
}
|
|
--i;
|
|
if (i < 0) {
|
|
#if PLIP_DEBUG > 0
|
|
printf("timeout rx msn %02x\n", c0);
|
|
#endif
|
|
return(-1);
|
|
}
|
|
PLIP_DELAY;
|
|
}
|
|
c = c | ((c0 << 1) & 0xf0);
|
|
/* Acknowledge */
|
|
outb(PLIP_DATA, 0x00);
|
|
#if PLIP_DEBUG != 0
|
|
if (plip_debug & PLIP_DEBUG_RX)
|
|
printf("%02x ", c);
|
|
#endif
|
|
|
|
cksum += (*buf++ = c);
|
|
}
|
|
#if PLIP_DEBUG != 0
|
|
if (plip_debug & PLIP_DEBUG_RX)
|
|
printf("\n");
|
|
#endif
|
|
return(cksum);
|
|
}
|
|
|
|
static int
|
|
plipintr(struct lpt_softc *sc)
|
|
{
|
|
extern struct mbuf *m_devget(char *, int, int, struct ifnet *, void (*)());
|
|
struct ifnet *ifp = &sc->sc_arpcom.ac_if;
|
|
unsigned int iobase = sc->sc_iobase;
|
|
struct mbuf *m;
|
|
struct ether_header *eh;
|
|
u_char *p = sc->sc_ifbuf, minibuf[4];
|
|
int c, s, len, cksum;
|
|
u_char c0;
|
|
|
|
printf("plipintr:\n");
|
|
|
|
/* Get the status */
|
|
|
|
c0 = inb(PLIP_STATUS);
|
|
#if PLIP_DEBUG > 0
|
|
if ((c0 & 0xf8) != 0xc0) {
|
|
printf("st5=%02x ", c0);
|
|
}
|
|
#endif
|
|
|
|
/* Don't want ints while receiving */
|
|
|
|
outb(PLIP_CONTROL, PLIP_INTR_DISABLE);
|
|
|
|
outb(PLIP_DATA, 0x01); /* send ACK */ /* via NERR */
|
|
|
|
#if defined(COMPAT_PLIP10)
|
|
if (ifp->if_flags & IFF_LINK0) {
|
|
if (plipreceive(iobase, minibuf, 3) < 0) goto err;
|
|
len = (minibuf[1] << 8) | minibuf[2];
|
|
if (len > (ifp->if_mtu + ifp->if_hdrlen)) goto err;
|
|
|
|
switch (minibuf[0]) {
|
|
case 0xfc:
|
|
p[0] = p[ 6] = ifp->ac_enaddr[0];
|
|
p[1] = p[ 7] = ifp->ac_enaddr[1];
|
|
p[2] = p[ 8] = ifp->ac_enaddr[2];
|
|
p[3] = p[ 9] = ifp->ac_enaddr[3];
|
|
p[4] = p[10] = ifp->ac_enaddr[4];
|
|
p += 5;
|
|
if ((cksum = plipreceive(iobase, p, 1)) < 0) goto err;
|
|
p += 6;
|
|
if ((c = plipreceive(iobase, p, len - 11)) < 0) goto err;
|
|
cksum += c + sc->sc_adrcksum;
|
|
c = p[1]; p[1] = p[2]; p[2] = c;
|
|
cksum &= 0xff;
|
|
break;
|
|
case 0xfd:
|
|
if ((cksum = plipreceive(iobase, p, len)) < 0) goto err;
|
|
break;
|
|
default:
|
|
goto err;
|
|
}
|
|
} else
|
|
#endif
|
|
{
|
|
if (plipreceive(iobase, minibuf, 2) < 0) goto err;
|
|
len = (minibuf[1] << 8) | minibuf[0];
|
|
if (len > (ifp->if_mtu + ifp->if_hdrlen)) {
|
|
log(LOG_NOTICE, "plip%d: packet > MTU\n", ifp->if_unit);
|
|
goto err;
|
|
}
|
|
#if PLIP_DEBUG != 0
|
|
if (plip_debug & PLIP_DEBUG_RX)
|
|
printf("len=%d ", len);
|
|
#endif
|
|
if (sizeof(struct ether_header) != 14) {
|
|
if ((cksum = plipreceive(iobase, p, 14)) < 0) goto err;
|
|
if ((c = plipreceive(iobase, p+16, len-14)) < 0) goto err;
|
|
cksum += c;
|
|
len += 2;
|
|
}
|
|
else
|
|
if ((cksum = plipreceive(iobase, p, len)) < 0) goto err;
|
|
}
|
|
|
|
if (plipreceive(iobase, minibuf, 1) < 0) goto err;
|
|
if ((cksum & 0xff) != minibuf[0]) {
|
|
printf("cksum=%d, %d, %d\n", cksum, c, minibuf[0]);
|
|
log(LOG_NOTICE, "plip%d: checksum error\n", ifp->if_unit);
|
|
goto err;
|
|
}
|
|
|
|
outb(PLIP_DATA, 0x00); /* clear ACK */ /* via NERR */
|
|
#if PLIP_DEBUG != 0
|
|
if (plip_debug & PLIP_DEBUG_RX)
|
|
printf("done\n");
|
|
#endif
|
|
s = splimp();
|
|
|
|
eh = (struct ether_header *)sc->sc_ifbuf;
|
|
|
|
if ((m = m_devget(sc->sc_ifbuf + sizeof(struct ether_header), len - sizeof(struct ether_header), 0, ifp, NULL))) {
|
|
/* We assume that the header fit entirely in one mbuf. */
|
|
/* eh = mtod(m, struct ether_header *);*/
|
|
/* m->m_pkthdr.len -= sizeof(*eh);*/
|
|
/* m->m_len -= sizeof(*eh);*/
|
|
/* m->m_data += sizeof(*eh);*/
|
|
/* printf("m->m_data=%08x ifbuf=%08x eh=%08x\n", m->m_data, sc->sc_ifbuf, eh);*/
|
|
|
|
#if NBPFILTER > 0
|
|
/*
|
|
* Check if there's a BPF listener on this interface.
|
|
* If so, hand off the raw packet to bpf.
|
|
*/
|
|
if (sc->sc_arpcom.ac_if.if_bpf) {
|
|
bpf_mtap(sc->sc_arpcom.ac_if.if_bpf, m);
|
|
}
|
|
#endif
|
|
ether_input(ifp, eh, m);
|
|
}
|
|
splx(s);
|
|
sc->sc_iferrs = 0;
|
|
ifp->if_ipackets++;
|
|
|
|
/* Allow ints again */
|
|
|
|
outb(PLIP_CONTROL, PLIP_INTR_ENABLE);
|
|
return(1);
|
|
|
|
err:
|
|
outb(PLIP_DATA, 0x00); /* clear ACK */ /* via NERR */
|
|
|
|
ifp->if_ierrors++;
|
|
sc->sc_iferrs++;
|
|
if (sc->sc_iferrs > PLIPMXERRS
|
|
|| (sc->sc_iferrs > 5 && (inb(iobase + lpt_status) & LPS_NBSY))) {
|
|
/* We are not able to send receive anything for now,
|
|
* so stop wasting our time and leave the interrupt
|
|
* disabled.
|
|
*/
|
|
if (sc->sc_iferrs == PLIPMXERRS + 1)
|
|
log(LOG_NOTICE, "plip%d: rx hard error\n", ifp->if_unit);
|
|
/* xxx i8255->port_a |= LPA_ACTIVE;*/
|
|
} else
|
|
;
|
|
/* xxx i8255->port_a |= LPA_ACKENABLE | LPA_ACTIVE;*/
|
|
|
|
/* Allow ints again */
|
|
|
|
outb(PLIP_CONTROL, PLIP_INTR_ENABLE);
|
|
return(1);
|
|
}
|
|
|
|
static int
|
|
pliptransmit(unsigned int iobase, u_char *buf, int len)
|
|
{
|
|
int i;
|
|
u_char cksum = 0, c;
|
|
u_char c0;
|
|
#if PLIP_DEBUG != 0
|
|
if (plip_debug & PLIP_DEBUG_TX)
|
|
printf("tx: len=%d ", len);
|
|
#endif
|
|
|
|
while (len--) {
|
|
i = PLIPMXSPIN2;
|
|
cksum += (c = *buf++);
|
|
#if PLIP_DEBUG != 0
|
|
if (plip_debug & PLIP_DEBUG_TX)
|
|
printf("%02x ", c);
|
|
#endif
|
|
/* xxx while ((i8255->port_c & LPC_NBUSY) == 0)
|
|
if (i-- < 0) return -1;
|
|
i8255->port_b = c & 0x0f;
|
|
i8255->port_b = c & 0x0f | 0x10;
|
|
c >>= 4;
|
|
while ((i8255->port_c & LPC_NBUSY) != 0)
|
|
if (i-- < 0) return -1;
|
|
i8255->port_b = c | 0x10;
|
|
i8255->port_b = c;
|
|
*/
|
|
|
|
/* Send the nibble + handshake */
|
|
|
|
outb(PLIP_DATA, 0x00 | (c & 0x0f));
|
|
outb(PLIP_DATA, 0x10 | (c & 0x0f));
|
|
|
|
while (1) {
|
|
c0 = inb(PLIP_STATUS);
|
|
if ((c0 & LPS_NBSY) == 0)
|
|
break;
|
|
if (--i == 0) { /* time out */
|
|
#if PLIP_DEBUG > 0
|
|
printf("timeout tx lsn %02x ", c0);
|
|
#endif
|
|
return(-1);
|
|
}
|
|
PLIP_DELAY;
|
|
}
|
|
|
|
outb(PLIP_DATA, 0x10 | (c >> 4));
|
|
outb(PLIP_DATA, 0x00 | (c >> 4));
|
|
i = PLIPMXSPIN2;
|
|
while (1) {
|
|
c0 = inb(PLIP_STATUS);
|
|
if ((c0 & LPS_NBSY) != 0)
|
|
break;
|
|
if (--i == 0) { /* time out */
|
|
#if PLIP_DEBUG > 0
|
|
printf("timeout tx msn %02x ", c0);
|
|
#endif
|
|
return(-1);
|
|
}
|
|
PLIP_DELAY;
|
|
}
|
|
}
|
|
#if PLIP_DEBUG != 0
|
|
if (plip_debug & PLIP_DEBUG_TX)
|
|
printf("done\n");
|
|
#endif
|
|
return(cksum);
|
|
}
|
|
|
|
/*
|
|
* Setup output on interface.
|
|
*/
|
|
static void
|
|
plipstart(struct ifnet *ifp)
|
|
{
|
|
struct lpt_softc *sc = (struct lpt_softc *) lptcd.cd_devs[ifp->if_unit];
|
|
unsigned int iobase = sc->sc_iobase;
|
|
struct mbuf *m0, *m;
|
|
u_char minibuf[4], cksum;
|
|
int len, i, s;
|
|
u_char *p;
|
|
|
|
#if PLIP_DEBUG != 0
|
|
if (plip_debug & PLIP_DEBUG_TX)
|
|
printf("plipstart: ");
|
|
#endif
|
|
if (ifp->if_flags & IFF_OACTIVE)
|
|
return;
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
|
|
if (sc->sc_ifretry)
|
|
untimeout((void (*)(void *))plipstart, ifp);
|
|
|
|
for (;;) {
|
|
s = splimp();
|
|
IF_DEQUEUE(&ifp->if_snd, m0);
|
|
splx(s);
|
|
if (!m0)
|
|
break;
|
|
|
|
for (len = 0, m = m0; m; m = m->m_next) {
|
|
#if PLIP_DEBUG > 0
|
|
if (plip_debug & PLIP_DEBUG_TX)
|
|
printf("len=%d %d\n", m->m_len, len);
|
|
#endif
|
|
len += m->m_len;
|
|
}
|
|
#if NBPFILTER > 0
|
|
p = sc->sc_ifbuf;
|
|
for (m = m0; m; m = m->m_next) {
|
|
if (m->m_len == 0)
|
|
continue;
|
|
bcopy(mtod(m, u_char *), p, m->m_len);
|
|
p += m->m_len;
|
|
}
|
|
if (sc->sc_arpcom.ac_if.if_bpf)
|
|
bpf_tap(sc->sc_arpcom.ac_if.if_bpf, sc->sc_ifbuf, len);
|
|
#endif
|
|
if (sizeof(struct ether_header) != 14)
|
|
len -= 2;
|
|
#if defined(COMPAT_PLIP10)
|
|
if (ifp->if_flags & IFF_LINK0) {
|
|
minibuf[0] = 3;
|
|
minibuf[1] = 0xfd;
|
|
minibuf[2] = len >> 8;
|
|
minibuf[3] = len;
|
|
} else
|
|
#endif
|
|
{
|
|
minibuf[0] = 2;
|
|
minibuf[1] = len;
|
|
minibuf[2] = len >> 8;
|
|
}
|
|
|
|
/*yyy for (i = PLIPMXSPIN1; (inb(PLIP_STATUS) & LPS_NERR) != 0; i--)
|
|
if (i < 0) goto retry;*/
|
|
|
|
/* Trigger remote interrupt */
|
|
|
|
#if PLIP_DEBUG > 0
|
|
if (plip_debug & PLIP_DEBUG_TX)
|
|
printf("st=%02x ", inb(PLIP_STATUS));
|
|
#endif
|
|
if (inb(PLIP_STATUS) & LPS_NERR) {
|
|
for (i = PLIPMXSPIN1; (inb(PLIP_STATUS) & LPS_NERR) != 0; i--)
|
|
PLIP_DELAY;
|
|
#if PLIP_DEBUG > 0
|
|
if (plip_debug & PLIP_DEBUG_TX)
|
|
printf("st1=%02x ", inb(PLIP_STATUS));
|
|
#endif
|
|
}
|
|
|
|
outb(PLIP_DATA, PLIP_REMOTE_TRIGGER);
|
|
for (i = PLIPMXSPIN1; (inb(PLIP_STATUS) & LPS_NERR) == 0; i--) {
|
|
if (i < 0 || (i > PLIPMXSPIN1/3
|
|
&& inb(PLIP_STATUS) & LPS_NACK)) {
|
|
#if PLIP_DEBUG > 0
|
|
printf("trigger ack timeout\n");
|
|
#endif
|
|
goto retry;
|
|
}
|
|
PLIP_DELAY;
|
|
}
|
|
#if PLIP_DEBUG > 0
|
|
if (plip_debug & PLIP_DEBUG_TX)
|
|
printf("st3=%02x ", inb(PLIP_STATUS));
|
|
#endif
|
|
|
|
/* Don't want ints while transmitting */
|
|
|
|
outb(PLIP_CONTROL, PLIP_INTR_DISABLE);
|
|
|
|
if (pliptransmit(iobase, minibuf + 1, minibuf[0]) < 0) goto retry;
|
|
for (cksum = 0, m = m0; m; m = m->m_next) {
|
|
if (sizeof(struct ether_header) != 14 && m == m0) {
|
|
i = pliptransmit(iobase, mtod(m, u_char *), 14);
|
|
if (i < 0) goto retry;
|
|
cksum += i;
|
|
i = pliptransmit(iobase, mtod(m, u_char *)+16, m->m_len-16);
|
|
if (i < 0) goto retry;
|
|
}
|
|
else
|
|
i = pliptransmit(iobase, mtod(m, u_char *), m->m_len);
|
|
if (i < 0) goto retry;
|
|
cksum += i;
|
|
}
|
|
if (pliptransmit(iobase, &cksum, 1) < 0) goto retry;
|
|
i = PLIPMXSPIN2;
|
|
while ((inb(PLIP_STATUS) & LPS_NBSY) == 0)
|
|
if (i-- < 0) goto retry;
|
|
|
|
outb(iobase + lpt_data, 0x00);
|
|
/* Re-enable ints */
|
|
|
|
outb(PLIP_CONTROL, PLIP_INTR_ENABLE);
|
|
|
|
ifp->if_opackets++;
|
|
ifp->if_obytes += len + 4;
|
|
sc->sc_ifretry = 0;
|
|
s = splimp();
|
|
m_freem(m0);
|
|
splx(s);
|
|
}
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
return;
|
|
|
|
retry:
|
|
#if PLIP_DEBUG > 0
|
|
if (plip_debug & PLIP_DEBUG_TX)
|
|
printf("retry: %02x", inb(iobase + lpt_status));
|
|
#endif
|
|
if (inb(PLIP_STATUS & LPS_NACK))
|
|
ifp->if_collisions++;
|
|
else
|
|
ifp->if_oerrors++;
|
|
if ((ifp->if_flags & (IFF_RUNNING | IFF_UP)) == (IFF_RUNNING | IFF_UP)
|
|
&& sc->sc_ifretry < PLIPMXRETRY) {
|
|
sc->sc_ifretry++;
|
|
s = splimp();
|
|
IF_PREPEND(&ifp->if_snd, m0);
|
|
splx(s);
|
|
timeout((void (*)(void *))plipstart, ifp, PLIPRETRY);
|
|
} else {
|
|
if (sc->sc_ifretry == PLIPMXRETRY) {
|
|
sc->sc_ifretry++;
|
|
log(LOG_NOTICE, "plip%d: tx hard error\n", ifp->if_unit);
|
|
}
|
|
s = splimp();
|
|
m_freem(m0);
|
|
splx(s);
|
|
}
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
outb(PLIP_DATA, 0x00);
|
|
|
|
/* Re-enable ints */
|
|
|
|
outb(PLIP_CONTROL, PLIP_INTR_ENABLE);
|
|
/*xxx if (sc->sc_iferrs > PLIPMXERRS)
|
|
i8255->port_a |= LPA_ACTIVE;
|
|
else
|
|
i8255->port_a |= LPA_ACKENABLE | LPA_ACTIVE;*/
|
|
return;
|
|
}
|
|
|
|
#endif
|