964 lines
25 KiB
C
964 lines
25 KiB
C
/* $NetBSD: edc_mca.c,v 1.25 2004/09/01 20:57:58 drochner Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 2001 The NetBSD Foundation, Inc.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Jaromir Dolecek.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the NetBSD
|
|
* Foundation, Inc. and its contributors.
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Driver for MCA ESDI controllers and disks conforming to IBM DASD
|
|
* spec.
|
|
*
|
|
* The driver was written with DASD Storage Interface Specification
|
|
* for MCA rev. 2.2 in hands, thanks to Scott Telford <st@epcc.ed.ac.uk>.
|
|
*
|
|
* TODO:
|
|
* - improve error recovery
|
|
* Issue soft reset on error or timeout?
|
|
* - test with > 1 disk (this is supported by some controllers)
|
|
* - test with > 1 ESDI controller in machine; shared interrupts
|
|
* necessary for this to work should be supported - edc_intr() specifically
|
|
* checks if the interrupt is for this controller
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: edc_mca.c,v 1.25 2004/09/01 20:57:58 drochner Exp $");
|
|
|
|
#include "rnd.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/device.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/disklabel.h>
|
|
#include <sys/disk.h>
|
|
#include <sys/syslog.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/vnode.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/kthread.h>
|
|
#if NRND > 0
|
|
#include <sys/rnd.h>
|
|
#endif
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/intr.h>
|
|
|
|
#include <dev/mca/mcareg.h>
|
|
#include <dev/mca/mcavar.h>
|
|
#include <dev/mca/mcadevs.h>
|
|
|
|
#include <dev/mca/edcreg.h>
|
|
#include <dev/mca/edvar.h>
|
|
#include <dev/mca/edcvar.h>
|
|
|
|
#include "locators.h"
|
|
|
|
#define EDC_ATTN_MAXTRIES 10000 /* How many times check for unbusy */
|
|
#define EDC_MAX_CMD_RES_LEN 8
|
|
|
|
struct edc_mca_softc {
|
|
struct device sc_dev;
|
|
|
|
bus_space_tag_t sc_iot;
|
|
bus_space_handle_t sc_ioh;
|
|
|
|
/* DMA related stuff */
|
|
bus_dma_tag_t sc_dmat; /* DMA tag as passed by parent */
|
|
bus_dmamap_t sc_dmamap_xfer; /* transfer dma map */
|
|
|
|
void *sc_ih; /* interrupt handle */
|
|
|
|
int sc_flags;
|
|
#define DASD_QUIET 0x01 /* don't dump cmd error info */
|
|
|
|
#define DASD_MAXDEVS 8
|
|
struct ed_softc *sc_ed[DASD_MAXDEVS];
|
|
int sc_maxdevs; /* max number of disks attached to this
|
|
* controller */
|
|
|
|
/* I/O results variables */
|
|
volatile int sc_stat;
|
|
#define STAT_START 0
|
|
#define STAT_ERROR 1
|
|
#define STAT_DONE 2
|
|
volatile int sc_resblk; /* residual block count */
|
|
|
|
/* CMD status block - only set & used in edc_intr() */
|
|
u_int16_t status_block[EDC_MAX_CMD_RES_LEN];
|
|
};
|
|
|
|
int edc_mca_probe __P((struct device *, struct cfdata *, void *));
|
|
void edc_mca_attach __P((struct device *, struct device *, void *));
|
|
|
|
CFATTACH_DECL(edc_mca, sizeof(struct edc_mca_softc),
|
|
edc_mca_probe, edc_mca_attach, NULL, NULL);
|
|
|
|
static int edc_intr __P((void *));
|
|
static void edc_dump_status_block __P((struct edc_mca_softc *,
|
|
u_int16_t *, int));
|
|
static int edc_do_attn __P((struct edc_mca_softc *, int, int, int));
|
|
static void edc_cmd_wait __P((struct edc_mca_softc *, int, int));
|
|
static void edcworker __P((void *));
|
|
static void edc_spawn_worker __P((void *));
|
|
|
|
int
|
|
edc_mca_probe(parent, match, aux)
|
|
struct device *parent;
|
|
struct cfdata *match;
|
|
void *aux;
|
|
{
|
|
struct mca_attach_args *ma = aux;
|
|
|
|
switch (ma->ma_id) {
|
|
case MCA_PRODUCT_IBM_ESDIC:
|
|
case MCA_PRODUCT_IBM_ESDIC_IG:
|
|
return (1);
|
|
default:
|
|
return (0);
|
|
}
|
|
}
|
|
|
|
static int
|
|
edcsubmatch(struct device *parent, struct cfdata *cf,
|
|
const locdesc_t *ldesc, void *aux)
|
|
{
|
|
|
|
if (cf->cf_loc[EDCCF_DRIVE] != EDCCF_DRIVE_DEFAULT &&
|
|
cf->cf_loc[EDCCF_DRIVE] != ldesc->locs[EDCCF_DRIVE])
|
|
return (0);
|
|
|
|
return (config_match(parent, cf, aux));
|
|
}
|
|
|
|
void
|
|
edc_mca_attach(parent, self, aux)
|
|
struct device *parent, *self;
|
|
void *aux;
|
|
{
|
|
struct edc_mca_softc *sc = (void *) self;
|
|
struct mca_attach_args *ma = aux;
|
|
struct ed_attach_args eda;
|
|
int pos2, pos3, pos4;
|
|
int irq, drq, iobase;
|
|
const char *typestr;
|
|
int devno, error;
|
|
int help[2];
|
|
locdesc_t *ldesc = (void *)help; /* XXX */
|
|
|
|
pos2 = mca_conf_read(ma->ma_mc, ma->ma_slot, 2);
|
|
pos3 = mca_conf_read(ma->ma_mc, ma->ma_slot, 3);
|
|
pos4 = mca_conf_read(ma->ma_mc, ma->ma_slot, 4);
|
|
|
|
/*
|
|
* POS register 2: (adf pos0)
|
|
*
|
|
* 7 6 5 4 3 2 1 0
|
|
* \ \____/ \ \__ enable: 0=adapter disabled, 1=adapter enabled
|
|
* \ \ \___ Primary/Alternate Port Addresses:
|
|
* \ \ 0=0x3510-3517 1=0x3518-0x351f
|
|
* \ \_____ DMA Arbitration Level: 0101=5 0110=6 0111=7
|
|
* \ 0000=0 0001=1 0011=3 0100=4
|
|
* \_________ Fairness On/Off: 1=On 0=Off
|
|
*
|
|
* POS register 3: (adf pos1)
|
|
*
|
|
* 7 6 5 4 3 2 1 0
|
|
* 0 0 \_/
|
|
* \__________ DMA Burst Pacing Interval: 10=24ms 11=31ms
|
|
* 01=16ms 00=Burst Disabled
|
|
*
|
|
* POS register 4: (adf pos2)
|
|
*
|
|
* 7 6 5 4 3 2 1 0
|
|
* \_/ \__ DMA Pacing Control: 1=Disabled 0=Enabled
|
|
* \____ Time to Release: 1X=6ms 01=3ms 00=Immediate
|
|
*
|
|
* IRQ is fixed to 14 (0x0e).
|
|
*/
|
|
|
|
switch (ma->ma_id) {
|
|
case MCA_PRODUCT_IBM_ESDIC:
|
|
typestr = "IBM ESDI Fixed Disk Controller";
|
|
break;
|
|
case MCA_PRODUCT_IBM_ESDIC_IG:
|
|
typestr = "IBM Integ. ESDI Fixed Disk & Controller";
|
|
break;
|
|
default:
|
|
typestr = NULL;
|
|
break;
|
|
}
|
|
|
|
irq = ESDIC_IRQ;
|
|
iobase = (pos2 & IO_IS_ALT) ? ESDIC_IOALT : ESDIC_IOPRM;
|
|
drq = (pos2 & DRQ_MASK) >> 2;
|
|
|
|
printf(" slot %d irq %d drq %d: %s\n", ma->ma_slot+1,
|
|
irq, drq, typestr);
|
|
|
|
#ifdef DIAGNOSTIC
|
|
/*
|
|
* It's not strictly necessary to check this, machine configuration
|
|
* utility uses only valid addresses.
|
|
*/
|
|
if (drq == 2 || drq >= 8) {
|
|
printf("%s: invalid DMA Arbitration Level %d\n",
|
|
sc->sc_dev.dv_xname, drq);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
printf("%s: Fairness %s, Release %s, ",
|
|
sc->sc_dev.dv_xname,
|
|
(pos2 & FAIRNESS_ENABLE) ? "On" : "Off",
|
|
(pos4 & RELEASE_1) ? "6ms"
|
|
: ((pos4 & RELEASE_2) ? "3ms" : "Immediate")
|
|
);
|
|
if ((pos4 & PACING_CTRL_DISABLE) == 0) {
|
|
static const char * const pacint[] =
|
|
{ "disabled", "16ms", "24ms", "31ms"};
|
|
printf("DMA burst pacing interval %s\n",
|
|
pacint[(pos3 & PACING_INT_MASK) >> 4]);
|
|
} else
|
|
printf("DMA pacing control disabled\n");
|
|
|
|
sc->sc_iot = ma->ma_iot;
|
|
|
|
if (bus_space_map(sc->sc_iot, iobase,
|
|
ESDIC_REG_NPORTS, 0, &sc->sc_ioh)) {
|
|
printf("%s: couldn't map registers\n",
|
|
sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
|
|
sc->sc_ih = mca_intr_establish(ma->ma_mc, irq, IPL_BIO, edc_intr, sc);
|
|
if (sc->sc_ih == NULL) {
|
|
printf("%s: couldn't establish interrupt handler\n",
|
|
sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
|
|
/* Create a MCA DMA map, used for data transfer */
|
|
sc->sc_dmat = ma->ma_dmat;
|
|
if ((error = mca_dmamap_create(sc->sc_dmat, MAXPHYS,
|
|
BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW | MCABUS_DMA_16BIT,
|
|
&sc->sc_dmamap_xfer, drq)) != 0){
|
|
printf("%s: couldn't create DMA map - error %d\n",
|
|
sc->sc_dev.dv_xname, error);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Integrated ESDI controller supports only one disk, other
|
|
* controllers support two disks.
|
|
*/
|
|
if (ma->ma_id == MCA_PRODUCT_IBM_ESDIC_IG)
|
|
sc->sc_maxdevs = 1;
|
|
else
|
|
sc->sc_maxdevs = 2;
|
|
|
|
/*
|
|
* Reset controller and attach individual disks. ed attach routine
|
|
* uses polling so that this works with interrupts disabled.
|
|
*/
|
|
|
|
/* Do a reset to ensure sane state after warm boot. */
|
|
if (bus_space_read_1(sc->sc_iot, sc->sc_ioh, BSR) & BSR_BUSY) {
|
|
/* hard reset */
|
|
printf("%s: controller busy, performing hardware reset ...\n",
|
|
sc->sc_dev.dv_xname);
|
|
bus_space_write_1(sc->sc_iot, sc->sc_ioh, BCR,
|
|
BCR_INT_ENABLE|BCR_RESET);
|
|
} else {
|
|
/* "SOFT" reset */
|
|
edc_do_attn(sc, ATN_RESET_ATTACHMENT, DASD_DEVNO_CONTROLLER,0);
|
|
}
|
|
|
|
/*
|
|
* Since interrupts are disabled, it's necessary
|
|
* to detect the interrupt request and call edc_intr()
|
|
* explicitly. See also edc_run_cmd().
|
|
*/
|
|
while (bus_space_read_1(sc->sc_iot, sc->sc_ioh, BSR) & BSR_BUSY) {
|
|
if (bus_space_read_1(sc->sc_iot, sc->sc_ioh, BSR) & BSR_INTR)
|
|
edc_intr(sc);
|
|
|
|
delay(100);
|
|
}
|
|
|
|
/* be quiet during probes */
|
|
sc->sc_flags |= DASD_QUIET;
|
|
|
|
/* check for attached disks */
|
|
for (devno = 0; devno < sc->sc_maxdevs; devno++) {
|
|
eda.edc_drive = devno;
|
|
ldesc->len = 1;
|
|
ldesc->locs[EDCCF_DRIVE] = devno;
|
|
sc->sc_ed[devno] =
|
|
(void *) config_found_sm_loc(self, "edc", ldesc, &eda,
|
|
NULL, edcsubmatch);
|
|
|
|
/* If initialization did not succeed, NULL the pointer. */
|
|
if (sc->sc_ed[devno]
|
|
&& (sc->sc_ed[devno]->sc_flags & EDF_INIT) == 0)
|
|
sc->sc_ed[devno] = NULL;
|
|
}
|
|
|
|
/* enable full error dumps again */
|
|
sc->sc_flags &= ~DASD_QUIET;
|
|
|
|
/*
|
|
* Check if there are any disks attached. If not, disestablish
|
|
* the interrupt.
|
|
*/
|
|
for (devno = 0; devno < sc->sc_maxdevs; devno++) {
|
|
if (sc->sc_ed[devno])
|
|
break;
|
|
}
|
|
|
|
if (devno == sc->sc_maxdevs) {
|
|
printf("%s: disabling controller (no drives attached)\n",
|
|
sc->sc_dev.dv_xname);
|
|
mca_intr_disestablish(ma->ma_mc, sc->sc_ih);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Run the worker thread.
|
|
*/
|
|
config_pending_incr();
|
|
kthread_create(edc_spawn_worker, (void *) sc);
|
|
}
|
|
|
|
void
|
|
edc_add_disk(sc, ed)
|
|
struct edc_mca_softc *sc;
|
|
struct ed_softc *ed;
|
|
{
|
|
sc->sc_ed[ed->sc_devno] = ed;
|
|
}
|
|
|
|
static int
|
|
edc_intr(arg)
|
|
void *arg;
|
|
{
|
|
struct edc_mca_softc *sc = arg;
|
|
u_int8_t isr, intr_id;
|
|
u_int16_t sifr;
|
|
int cmd=-1, devno;
|
|
|
|
/*
|
|
* Check if the interrupt was for us.
|
|
*/
|
|
if ((bus_space_read_1(sc->sc_iot, sc->sc_ioh, BSR) & BSR_INTR) == 0)
|
|
return (0);
|
|
|
|
/*
|
|
* Read ISR to find out interrupt type. This also clears the interrupt
|
|
* condition and BSR_INTR flag. Accordings to docs interrupt ID of 0, 2
|
|
* and 4 are reserved and not used.
|
|
*/
|
|
isr = bus_space_read_1(sc->sc_iot, sc->sc_ioh, ISR);
|
|
intr_id = isr & ISR_INTR_ID_MASK;
|
|
|
|
#ifdef EDC_DEBUG
|
|
if (intr_id == 0 || intr_id == 2 || intr_id == 4) {
|
|
printf("%s: bogus interrupt id %d\n", sc->sc_dev.dv_xname,
|
|
(int) intr_id);
|
|
return (0);
|
|
}
|
|
#endif
|
|
|
|
/* Get number of device whose intr this was */
|
|
devno = (isr & 0xe0) >> 5;
|
|
|
|
/*
|
|
* Get Status block. Higher byte always says how long the status
|
|
* block is, rest is device number and command code.
|
|
* Check the status block length against our supported maximum length
|
|
* and fetch the data.
|
|
*/
|
|
if (bus_space_read_1(sc->sc_iot, sc->sc_ioh,BSR) & BSR_SIFR_FULL) {
|
|
size_t len;
|
|
int i;
|
|
|
|
sifr = le16toh(bus_space_read_2(sc->sc_iot, sc->sc_ioh, SIFR));
|
|
len = (sifr & 0xff00) >> 8;
|
|
#ifdef DEBUG
|
|
if (len > EDC_MAX_CMD_RES_LEN)
|
|
panic("%s: maximum Status Length exceeded: %d > %d",
|
|
sc->sc_dev.dv_xname,
|
|
len, EDC_MAX_CMD_RES_LEN);
|
|
#endif
|
|
|
|
/* Get command code */
|
|
cmd = sifr & SIFR_CMD_MASK;
|
|
|
|
/* Read whole status block */
|
|
sc->status_block[0] = sifr;
|
|
for(i=1; i < len; i++) {
|
|
while((bus_space_read_1(sc->sc_iot, sc->sc_ioh, BSR)
|
|
& BSR_SIFR_FULL) == 0)
|
|
;
|
|
|
|
sc->status_block[i] = le16toh(
|
|
bus_space_read_2(sc->sc_iot, sc->sc_ioh, SIFR));
|
|
}
|
|
/* zero out rest */
|
|
if (i < EDC_MAX_CMD_RES_LEN) {
|
|
memset(&sc->status_block[i], 0,
|
|
(EDC_MAX_CMD_RES_LEN-i)*sizeof(u_int16_t));
|
|
}
|
|
}
|
|
|
|
switch (intr_id) {
|
|
case ISR_DATA_TRANSFER_RDY:
|
|
/*
|
|
* Ready to do DMA. The DMA controller has already been
|
|
* setup, now just kick disk controller to do the transfer.
|
|
*/
|
|
bus_space_write_1(sc->sc_iot, sc->sc_ioh, BCR,
|
|
BCR_INT_ENABLE|BCR_DMA_ENABLE);
|
|
break;
|
|
|
|
case ISR_COMPLETED:
|
|
case ISR_COMPLETED_WITH_ECC:
|
|
case ISR_COMPLETED_RETRIES:
|
|
case ISR_COMPLETED_WARNING:
|
|
/*
|
|
* Copy device config data if appropriate. sc->sc_ed[]
|
|
* entry might be NULL during probe.
|
|
*/
|
|
if (cmd == CMD_GET_DEV_CONF && sc->sc_ed[devno]) {
|
|
memcpy(sc->sc_ed[devno]->sense_data, sc->status_block,
|
|
sizeof(sc->sc_ed[devno]->sense_data));
|
|
}
|
|
|
|
sc->sc_stat = STAT_DONE;
|
|
break;
|
|
|
|
case ISR_RESET_COMPLETED:
|
|
case ISR_ABORT_COMPLETED:
|
|
/* nothing to do */
|
|
break;
|
|
|
|
case ISR_ATTN_ERROR:
|
|
/*
|
|
* Basically, this means driver bug or something seriously
|
|
* hosed. panic rather than extending the lossage.
|
|
* No status block available, so no further info.
|
|
*/
|
|
panic("%s: dev %d: attention error",
|
|
sc->sc_dev.dv_xname,
|
|
devno);
|
|
/* NOTREACHED */
|
|
break;
|
|
|
|
default:
|
|
if ((sc->sc_flags & DASD_QUIET) == 0)
|
|
edc_dump_status_block(sc, sc->status_block, intr_id);
|
|
|
|
sc->sc_stat = STAT_ERROR;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Unless the interrupt is for Data Transfer Ready or
|
|
* Attention Error, finish by assertion EOI. This makes
|
|
* attachment aware the interrupt is processed and system
|
|
* is ready to accept another one.
|
|
*/
|
|
if (intr_id != ISR_DATA_TRANSFER_RDY && intr_id != ISR_ATTN_ERROR)
|
|
edc_do_attn(sc, ATN_END_INT, devno, intr_id);
|
|
|
|
/* If Read or Write Data, wakeup worker thread to finish it */
|
|
if (intr_id != ISR_DATA_TRANSFER_RDY) {
|
|
if (cmd == CMD_READ_DATA || cmd == CMD_WRITE_DATA)
|
|
sc->sc_resblk = sc->status_block[SB_RESBLKCNT_IDX];
|
|
wakeup_one(sc);
|
|
}
|
|
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* This follows the exact order for Attention Request as
|
|
* written in DASD Storage Interface Specification MC (Rev 2.2).
|
|
*/
|
|
static int
|
|
edc_do_attn(sc, attn_type, devno, intr_id)
|
|
struct edc_mca_softc *sc;
|
|
int attn_type, devno, intr_id;
|
|
{
|
|
int tries;
|
|
|
|
/* 1. Disable interrupts in BCR. */
|
|
bus_space_write_1(sc->sc_iot, sc->sc_ioh, BCR, 0);
|
|
|
|
/*
|
|
* 2. Assure NOT BUSY and NO INTERRUPT PENDING, unless acknowledging
|
|
* a RESET COMPLETED interrupt.
|
|
*/
|
|
if (intr_id != ISR_RESET_COMPLETED) {
|
|
#ifdef EDC_DEBUG
|
|
if (attn_type == ATN_CMD_REQ
|
|
&& (bus_space_read_1(sc->sc_iot, sc->sc_ioh, BSR)
|
|
& BSR_INT_PENDING))
|
|
panic("%s: edc int pending", sc->sc_dev.dv_xname);
|
|
#endif
|
|
|
|
for(tries=1; tries < EDC_ATTN_MAXTRIES; tries++) {
|
|
if ((bus_space_read_1(sc->sc_iot, sc->sc_ioh, BSR)
|
|
& BSR_BUSY) == 0)
|
|
break;
|
|
}
|
|
|
|
if (tries == EDC_ATTN_MAXTRIES) {
|
|
printf("%s: edc_do_attn: timeout waiting for attachment to become available\n",
|
|
sc->sc_ed[devno]->sc_dev.dv_xname);
|
|
return (EIO);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* 3. Write proper DEVICE NUMBER and Attention number to ATN.
|
|
*/
|
|
bus_space_write_1(sc->sc_iot, sc->sc_ioh, ATN, attn_type | (devno<<5));
|
|
|
|
/*
|
|
* 4. Enable interrupts via BCR.
|
|
*/
|
|
bus_space_write_1(sc->sc_iot, sc->sc_ioh, BCR, BCR_INT_ENABLE);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Wait until command is processed, timeout after 'secs' seconds.
|
|
* We use mono_time, since we don't need actual RTC, just time
|
|
* interval.
|
|
*/
|
|
static void
|
|
edc_cmd_wait(sc, secs, poll)
|
|
struct edc_mca_softc *sc;
|
|
int secs, poll;
|
|
{
|
|
int val;
|
|
|
|
if (!poll) {
|
|
int s;
|
|
|
|
/* Not polling, can sleep. Sleep until we are awakened,
|
|
* but maximum secs seconds.
|
|
*/
|
|
s = splbio();
|
|
if (sc->sc_stat != STAT_DONE)
|
|
(void) tsleep(sc, PRIBIO, "edcwcmd", secs * hz);
|
|
splx(s);
|
|
}
|
|
|
|
/* Wait until the command is completely finished */
|
|
while((val = bus_space_read_1(sc->sc_iot, sc->sc_ioh, BSR))
|
|
& BSR_CMD_INPROGRESS) {
|
|
if (poll && (val & BSR_INTR))
|
|
edc_intr(sc);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Command controller to execute specified command on a device.
|
|
*/
|
|
int
|
|
edc_run_cmd(sc, cmd, devno, cmd_args, cmd_len, poll)
|
|
struct edc_mca_softc *sc;
|
|
int cmd;
|
|
int devno;
|
|
u_int16_t cmd_args[];
|
|
int cmd_len, poll;
|
|
{
|
|
int i, error, tries;
|
|
u_int16_t cmd0;
|
|
|
|
sc->sc_stat = STAT_START;
|
|
|
|
/* Do Attention Request for Command Request. */
|
|
if ((error = edc_do_attn(sc, ATN_CMD_REQ, devno, 0)))
|
|
return (error);
|
|
|
|
/*
|
|
* Construct the command. The bits are like this:
|
|
*
|
|
* 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
|
|
* \_/ 0 0 1 0 \__/ \_____/
|
|
* \ \__________/ \ \_ Command Code (see CMD_*)
|
|
* \ \ \__ Device: 0 common, 7 controller
|
|
* \ \__ Options: reserved, bit 10=cache bypass bit
|
|
* \_ Type: 00=2B, 01=4B, 10 and 11 reserved
|
|
*
|
|
* We always use device 0 or 1, so difference is made only by Command
|
|
* Code, Command Options and command length.
|
|
*/
|
|
cmd0 = ((cmd_len == 4) ? (CIFR_LONG_CMD) : 0)
|
|
| (devno << 5)
|
|
| (cmd_args[0] << 8) | cmd;
|
|
cmd_args[0] = cmd0;
|
|
|
|
/*
|
|
* Write word of CMD to the CIFR. This sets "Command
|
|
* Interface Register Full (CMD IN)" in BSR. Once the attachment
|
|
* detects it, it reads the word and clears CMD IN. This all should
|
|
* be quite fast, so don't sleep in !poll case neither.
|
|
*/
|
|
for(i=0; i < cmd_len; i++) {
|
|
bus_space_write_2(sc->sc_iot, sc->sc_ioh, CIFR,
|
|
htole16(cmd_args[i]));
|
|
|
|
/* Wait until CMD IN is cleared. */
|
|
tries = 0;
|
|
for(; (bus_space_read_1(sc->sc_iot, sc->sc_ioh, BSR)
|
|
& BSR_CIFR_FULL) && tries < 10000 ; tries++)
|
|
delay(poll ? 1000 : 1);
|
|
;
|
|
|
|
if (tries == 10000
|
|
&& bus_space_read_1(sc->sc_iot, sc->sc_ioh, BSR)
|
|
& BSR_CIFR_FULL) {
|
|
printf("%s: device too slow to accept command %d\n",
|
|
sc->sc_dev.dv_xname, cmd);
|
|
return (EIO);
|
|
}
|
|
}
|
|
|
|
/* Wait for command to complete, but maximum 15 seconds. */
|
|
edc_cmd_wait(sc, 15, poll);
|
|
|
|
return ((sc->sc_stat != STAT_DONE) ? EIO : 0);
|
|
}
|
|
|
|
#ifdef EDC_DEBUG
|
|
static const char * const edc_commands[] = {
|
|
"Invalid Command",
|
|
"Read Data",
|
|
"Write Data",
|
|
"Read Verify",
|
|
"Write with Verify",
|
|
"Seek",
|
|
"Park Head",
|
|
"Get Command Complete Status",
|
|
"Get Device Status",
|
|
"Get Device Configuration",
|
|
"Get POS Information",
|
|
"Translate RBA",
|
|
"Write Attachment Buffer",
|
|
"Read Attachment Buffer",
|
|
"Run Diagnostic Test",
|
|
"Get Diagnostic Status Block",
|
|
"Get MFG Header",
|
|
"Format Unit",
|
|
"Format Prepare",
|
|
"Set MAX RBA",
|
|
"Set Power Saving Mode",
|
|
"Power Conservation Command",
|
|
};
|
|
|
|
static const char * const edc_cmd_status[256] = {
|
|
"Reserved",
|
|
"Command completed successfully",
|
|
"Reserved",
|
|
"Command completed successfully with ECC applied",
|
|
"Reserved",
|
|
"Command completed successfully with retries",
|
|
"Format Command partially completed", /* Status available */
|
|
"Command completed successfully with ECC and retries",
|
|
"Command completed with Warning", /* Command Error is available */
|
|
"Aborted",
|
|
"Reset completed",
|
|
"Data Transfer Ready", /* No Status Block available */
|
|
"Command terminated with failure", /* Device Error is available */
|
|
"DMA Error", /* Retry entire command as recovery */
|
|
"Command Block Error",
|
|
"Attention Error (Illegal Attention Code)",
|
|
/* 0x14 - 0xff reserved */
|
|
};
|
|
|
|
static const char * const edc_cmd_error[256] = {
|
|
"No Error",
|
|
"Invalid parameter in the command block",
|
|
"Reserved",
|
|
"Command not supported",
|
|
"Command Aborted per request",
|
|
"Reserved",
|
|
"Command rejected", /* Attachment diagnostic failure */
|
|
"Format Rejected", /* Prepare Format command is required */
|
|
"Format Error (Primary Map is not readable)",
|
|
"Format Error (Secondary map is not readable)",
|
|
"Format Error (Diagnostic Failure)",
|
|
"Format Warning (Secondary Map Overflow)",
|
|
"Reserved"
|
|
"Format Error (Host Checksum Error)",
|
|
"Reserved",
|
|
"Format Warning (Push table overflow)",
|
|
"Format Warning (More pushes than allowed)",
|
|
"Reserved",
|
|
"Format Warning (Error during verifying)",
|
|
"Invalid device number for the command",
|
|
/* 0x14-0xff reserved */
|
|
};
|
|
|
|
static const char * const edc_dev_errors[] = {
|
|
"No Error",
|
|
"Seek Fault", /* Device report */
|
|
"Interface Fault (Parity, Attn, or Cmd Complete Error)",
|
|
"Block not found (ID not found)",
|
|
"Block not found (AM not found)",
|
|
"Data ECC Error (hard error)",
|
|
"ID CRC Error",
|
|
"RBA Out of Range",
|
|
"Reserved",
|
|
"Defective Block",
|
|
"Reserved",
|
|
"Selection Error",
|
|
"Reserved",
|
|
"Write Fault",
|
|
"No index or sector pulse",
|
|
"Device Not Ready",
|
|
"Seek Error", /* Attachment report */
|
|
"Bad Format",
|
|
"Volume Overflow",
|
|
"No Data AM Found",
|
|
"Block not found (No ID AM or ID CRC error occurred)",
|
|
"Reserved",
|
|
"Reserved",
|
|
"No ID found on track (ID search)",
|
|
/* 0x19 - 0xff reserved */
|
|
};
|
|
#endif /* EDC_DEBUG */
|
|
|
|
static void
|
|
edc_dump_status_block(sc, status_block, intr_id)
|
|
struct edc_mca_softc *sc;
|
|
u_int16_t *status_block;
|
|
int intr_id;
|
|
{
|
|
#ifdef EDC_DEBUG
|
|
printf("%s: Command: %s, Status: %s (intr %d)\n",
|
|
sc->sc_dev.dv_xname,
|
|
edc_commands[status_block[0] & 0x1f],
|
|
edc_cmd_status[SB_GET_CMD_STATUS(status_block)],
|
|
intr_id
|
|
);
|
|
#else
|
|
printf("%s: Command: %d, Status: %d (intr %d)\n",
|
|
sc->sc_dev.dv_xname,
|
|
status_block[0] & 0x1f,
|
|
SB_GET_CMD_STATUS(status_block),
|
|
intr_id
|
|
);
|
|
#endif
|
|
printf("%s: # left blocks: %u, last processed RBA: %u\n",
|
|
sc->sc_dev.dv_xname,
|
|
status_block[SB_RESBLKCNT_IDX],
|
|
(status_block[5] << 16) | status_block[4]);
|
|
|
|
if (intr_id == ISR_COMPLETED_WARNING) {
|
|
#ifdef EDC_DEBUG
|
|
printf("%s: Command Error Code: %s\n",
|
|
sc->sc_dev.dv_xname,
|
|
edc_cmd_error[status_block[1] & 0xff]);
|
|
#else
|
|
printf("%s: Command Error Code: %d\n",
|
|
sc->sc_dev.dv_xname,
|
|
status_block[1] & 0xff);
|
|
#endif
|
|
}
|
|
|
|
if (intr_id == ISR_CMD_FAILED) {
|
|
#ifdef EDC_DEBUG
|
|
char buf[100];
|
|
|
|
printf("%s: Device Error Code: %s\n",
|
|
sc->sc_dev.dv_xname,
|
|
edc_dev_errors[status_block[2] & 0xff]);
|
|
bitmask_snprintf((status_block[2] & 0xff00) >> 8,
|
|
"\20"
|
|
"\01SeekOrCmdComplete"
|
|
"\02Track0Flag"
|
|
"\03WriteFault"
|
|
"\04Selected"
|
|
"\05Ready"
|
|
"\06Reserved0"
|
|
"\07STANDBY"
|
|
"\010Reserved0",
|
|
buf, sizeof(buf));
|
|
printf("%s: Device Status: %s\n",
|
|
sc->sc_dev.dv_xname, buf);
|
|
#else
|
|
printf("%s: Device Error Code: %d, Device Status: %d\n",
|
|
sc->sc_dev.dv_xname,
|
|
status_block[2] & 0xff,
|
|
(status_block[2] & 0xff00) >> 8);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
static void
|
|
edc_spawn_worker(arg)
|
|
void *arg;
|
|
{
|
|
struct edc_mca_softc *sc = (struct edc_mca_softc *) arg;
|
|
int error;
|
|
struct proc *wrk;
|
|
|
|
/* Now, everything is ready, start a kthread */
|
|
if ((error = kthread_create1(edcworker, sc, &wrk,
|
|
"%s", sc->sc_dev.dv_xname))) {
|
|
printf("%s: cannot spawn worker thread: errno=%d\n",
|
|
sc->sc_dev.dv_xname, error);
|
|
panic("edc_spawn_worker");
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Main worker thread function.
|
|
*/
|
|
void
|
|
edcworker(arg)
|
|
void *arg;
|
|
{
|
|
struct edc_mca_softc *sc = (struct edc_mca_softc *) arg;
|
|
struct ed_softc *ed;
|
|
struct buf *bp;
|
|
int i, error;
|
|
|
|
config_pending_decr();
|
|
|
|
for(;;) {
|
|
/* Wait until awakened */
|
|
(void) tsleep(sc, PRIBIO, "edcidle", 0);
|
|
|
|
for(i=0; i<sc->sc_maxdevs; ) {
|
|
if ((ed = sc->sc_ed[i]) == NULL) {
|
|
i++;
|
|
continue;
|
|
}
|
|
|
|
/* Is there a buf for us ? */
|
|
simple_lock(&ed->sc_q_lock);
|
|
if ((bp = BUFQ_GET(&ed->sc_q)) == NULL) {
|
|
simple_unlock(&ed->sc_q_lock);
|
|
i++;
|
|
continue;
|
|
}
|
|
simple_unlock(&ed->sc_q_lock);
|
|
|
|
/* Instrumentation. */
|
|
disk_busy(&ed->sc_dk);
|
|
|
|
error = edc_bio(sc, ed, bp->b_data, bp->b_bcount,
|
|
bp->b_rawblkno, (bp->b_flags & B_READ), 0);
|
|
|
|
if (error) {
|
|
bp->b_error = error;
|
|
bp->b_flags |= B_ERROR;
|
|
} else {
|
|
/* Set resid, most commonly to zero. */
|
|
bp->b_resid = sc->sc_resblk * DEV_BSIZE;
|
|
}
|
|
|
|
disk_unbusy(&ed->sc_dk, (bp->b_bcount - bp->b_resid),
|
|
(bp->b_flags & B_READ));
|
|
#if NRND > 0
|
|
rnd_add_uint32(&ed->rnd_source, bp->b_blkno);
|
|
#endif
|
|
biodone(bp);
|
|
}
|
|
}
|
|
}
|
|
|
|
int
|
|
edc_bio(struct edc_mca_softc *sc, struct ed_softc *ed, void *data,
|
|
size_t bcount, daddr_t rawblkno, int isread, int poll)
|
|
{
|
|
u_int16_t cmd_args[4];
|
|
int error=0, fl;
|
|
u_int16_t track;
|
|
u_int16_t cyl;
|
|
u_int8_t head;
|
|
u_int8_t sector;
|
|
|
|
mca_disk_busy();
|
|
|
|
/* set WAIT and R/W flag appropriately for the DMA transfer */
|
|
fl = ((poll) ? BUS_DMA_NOWAIT : BUS_DMA_WAITOK)
|
|
| ((isread) ? BUS_DMA_READ : BUS_DMA_WRITE);
|
|
|
|
/* Load the buffer for DMA transfer. */
|
|
if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_dmamap_xfer, data,
|
|
bcount, NULL, BUS_DMA_STREAMING|fl))) {
|
|
printf("%s: ed_bio: unable to load DMA buffer - error %d\n",
|
|
ed->sc_dev.dv_xname, error);
|
|
goto out;
|
|
}
|
|
|
|
bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap_xfer, 0,
|
|
bcount, (isread) ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
|
|
|
|
track = rawblkno / ed->sectors;
|
|
head = track % ed->heads;
|
|
cyl = track / ed->heads;
|
|
sector = rawblkno % ed->sectors;
|
|
|
|
/* Read or Write Data command */
|
|
cmd_args[0] = 2; /* Options 0000010 */
|
|
cmd_args[1] = bcount / DEV_BSIZE;
|
|
cmd_args[2] = ((cyl & 0x1f) << 11) | (head << 5) | sector;
|
|
cmd_args[3] = ((cyl & 0x3E0) >> 5);
|
|
error = edc_run_cmd(sc,
|
|
(isread) ? CMD_READ_DATA : CMD_WRITE_DATA,
|
|
ed->sc_devno, cmd_args, 4, poll);
|
|
|
|
/* Sync the DMA memory */
|
|
if (!error) {
|
|
bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap_xfer, 0, bcount,
|
|
(isread)? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
|
|
}
|
|
|
|
/* We are done, unload buffer from DMA map */
|
|
bus_dmamap_unload(sc->sc_dmat, sc->sc_dmamap_xfer);
|
|
|
|
out:
|
|
mca_disk_unbusy();
|
|
|
|
return (error);
|
|
}
|