NetBSD/sys/sys/param.h
2002-10-23 09:22:35 +00:00

294 lines
9.8 KiB
C

/* $NetBSD: param.h,v 1.151 2002/10/23 09:22:36 jdolecek Exp $ */
/*-
* Copyright (c) 1982, 1986, 1989, 1993
* The Regents of the University of California. All rights reserved.
* (c) UNIX System Laboratories, Inc.
* All or some portions of this file are derived from material licensed
* to the University of California by American Telephone and Telegraph
* Co. or Unix System Laboratories, Inc. and are reproduced herein with
* the permission of UNIX System Laboratories, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)param.h 8.3 (Berkeley) 4/4/95
*/
#ifndef _SYS_PARAM_H_
#define _SYS_PARAM_H_
/*
* Historic BSD #defines -- probably will remain untouched for all time.
*/
#define BSD 199506 /* System version (year & month). */
#define BSD4_3 1
#define BSD4_4 1
/*
* #define __NetBSD_Version__ MMmmrrpp00
*
* M = major version
* m = minor version
* r = release ["",A-Z,Z[A-Z] but numeric]
* p = patchlevel
*
* So:
* NetBSD-1.2D = 102040000
* And:
* NetBSD-1.2.1 = 102000100
*
*
* Don't forget to change conf/osrelease.sh too.
*/
#define __NetBSD_Version__ 106100000 /* NetBSD 1.6J */
/*
* Historical NetBSD #define
*
* NetBSD 1.4 was the last release for which this value was incremented.
* The value is now permanently fixed at 199905. It will never be
* changed again.
*
* New code must use __NetBSD_Version__ instead, and should not even
* count on NetBSD being defined.
*
*/
#define NetBSD 199905 /* NetBSD version (year & month). */
#include <sys/null.h>
#ifndef _LOCORE
#include <sys/inttypes.h>
#include <sys/types.h>
#endif
/*
* Machine-independent constants (some used in following include files).
* Redefined constants are from POSIX 1003.1 limits file.
*
* MAXCOMLEN should be >= sizeof(ac_comm) (see <acct.h>)
* MAXLOGNAME should be >= UT_NAMESIZE (see <utmp.h>)
*/
#include <sys/syslimits.h>
#define MAXCOMLEN 16 /* max command name remembered */
#define MAXINTERP 64 /* max interpreter file name length */
/* DEPRECATED: use LOGIN_NAME_MAX instead. */
#define MAXLOGNAME (LOGIN_NAME_MAX - 1) /* max login name length */
#define NCARGS ARG_MAX /* max bytes for an exec function */
#define NGROUPS NGROUPS_MAX /* max number groups */
#define NOFILE OPEN_MAX /* max open files per process */
#define NOGROUP 65535 /* marker for empty group set member */
#define MAXHOSTNAMELEN 256 /* max hostname size */
#ifndef MAXUPRC /* max simultaneous processes */
#define MAXUPRC CHILD_MAX /* POSIX 1003.1-compliant default */
#else
#if (MAXUPRC - 0) < CHILD_MAX
#error MAXUPRC less than CHILD_MAX. See options(4) for details.
#endif /* (MAXUPRC - 0) < CHILD_MAX */
#endif /* !defined(MAXUPRC) */
/* More types and definitions used throughout the kernel. */
#ifdef _KERNEL
#include <sys/cdefs.h>
#include <sys/errno.h>
#include <sys/time.h>
#include <sys/resource.h>
#include <sys/ucred.h>
#include <sys/uio.h>
#ifndef NPROC
#define NPROC (20 + 16 * MAXUSERS)
#endif
#ifndef NTEXT
#define NTEXT (80 + NPROC / 8) /* actually the object cache */
#endif
#ifndef NVNODE
#define NVNODE (NPROC + NTEXT + 100)
#define NVNODE_IMPLICIT
#endif
#endif /* _KERNEL */
/* Signals. */
#include <sys/signal.h>
/* Machine type dependent parameters. */
#include <machine/param.h>
#include <machine/limits.h>
/*
* Priorities. Note that with 32 run queues, differences less than 4 are
* insignificant.
*/
#define PSWP 0
#define PVM 4
#define PINOD 8
#define PRIBIO 16
#define PVFS 20
#define PZERO 22 /* No longer magic, shouldn't be here. XXX */
#define PSOCK 24
#define PWAIT 32
#define PLOCK 36
#define PPAUSE 40
#define PUSER 50
#define MAXPRI 127 /* Priorities range from 0 through MAXPRI. */
#define PRIMASK 0x0ff
#define PCATCH 0x100 /* OR'd with pri for tsleep to check signals */
#define PNORELOCK 0x200 /* OR'd with pri for cond_wait() to not relock
the interlock */
#define NBPW sizeof(int) /* number of bytes per word (integer) */
#define CMASK 022 /* default file mask: S_IWGRP|S_IWOTH */
#define NODEV (dev_t)(-1) /* non-existent device */
#define CBLOCK 64 /* Clist block size, must be a power of 2. */
#define CBQSIZE (CBLOCK/NBBY) /* Quote bytes/cblock - can do better. */
/* Data chars/clist. */
#define CBSIZE (CBLOCK - (int)sizeof(struct cblock *) - CBQSIZE)
#define CROUND (CBLOCK - 1) /* Clist rounding. */
/*
* File system parameters and macros.
*
* The file system is made out of blocks of at most MAXBSIZE units, with
* smaller units (fragments) only in the last direct block. MAXBSIZE
* primarily determines the size of buffers in the buffer pool. It may be
* made larger without any effect on existing file systems; however making
* it smaller may make some file systems unmountable.
*/
#ifndef MAXBSIZE /* XXX */
#define MAXBSIZE MAXPHYS
#endif
#define MAXFRAG 8
/*
* MAXPATHLEN defines the longest permissible path length after expanding
* symbolic links. It is used to allocate a temporary buffer from the buffer
* pool in which to do the name expansion, hence should be a power of two,
* and must be less than or equal to MAXBSIZE. MAXSYMLINKS defines the
* maximum number of symbolic links that may be expanded in a path name.
* It should be set high enough to allow all legitimate uses, but halt
* infinite loops reasonably quickly.
*/
#define MAXPATHLEN PATH_MAX
#define MAXSYMLINKS 32
/* Bit map related macros. */
#define setbit(a,i) ((a)[(i)/NBBY] |= 1<<((i)%NBBY))
#define clrbit(a,i) ((a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
#define isset(a,i) ((a)[(i)/NBBY] & (1<<((i)%NBBY)))
#define isclr(a,i) (((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
/* Macros for counting and rounding. */
#ifndef howmany
#define howmany(x, y) (((x)+((y)-1))/(y))
#endif
#define roundup(x, y) ((((x)+((y)-1))/(y))*(y))
#define powerof2(x) ((((x)-1)&(x))==0)
/* Macros for min/max. */
#define MIN(a,b) (((a)<(b))?(a):(b))
#define MAX(a,b) (((a)>(b))?(a):(b))
/*
* Constants for setting the parameters of the kernel memory allocator.
*
* 2 ** MINBUCKET is the smallest unit of memory that will be
* allocated. It must be at least large enough to hold a pointer.
*
* Units of memory less or equal to MAXALLOCSAVE will permanently
* allocate physical memory; requests for these size pieces of
* memory are quite fast. Allocations greater than MAXALLOCSAVE must
* always allocate and free physical memory; requests for these
* size allocations should be done infrequently as they will be slow.
*
* Constraints: NBPG <= MAXALLOCSAVE <= 2 ** (MINBUCKET + 14), and
* MAXALLOCSAVE must be a power of two.
*/
#define MINBUCKET 4 /* 4 => min allocation of 16 bytes */
#define MAXALLOCSAVE (2 * NBPG)
/*
* Scale factor for scaled integers used to count %cpu time and load avgs.
*
* The number of CPU `tick's that map to a unique `%age' can be expressed
* by the formula (1 / (2 ^ (FSHIFT - 11))). The maximum load average that
* can be calculated (assuming 32 bits) can be closely approximated using
* the formula (2 ^ (2 * (16 - FSHIFT))) for (FSHIFT < 15).
*
* For the scheduler to maintain a 1:1 mapping of CPU `tick' to `%age',
* FSHIFT must be at least 11; this gives us a maximum load avg of ~1024.
*/
#define FSHIFT 11 /* bits to right of fixed binary point */
#define FSCALE (1<<FSHIFT)
/*
* The time for a process to be blocked before being very swappable.
* This is a number of seconds which the system takes as being a non-trivial
* amount of real time. You probably shouldn't change this;
* it is used in subtle ways (fractions and multiples of it are, that is, like
* half of a ``long time'', almost a long time, etc.)
* It is related to human patience and other factors which don't really
* change over time.
*/
#define MAXSLP 20
/*
* Defaults for Unified Buffer Cache parameters.
* These may be overridden in <machine/param.h>.
*/
#ifndef UBC_WINSHIFT
#define UBC_WINSHIFT 13
#endif
#ifndef UBC_NWINS
#define UBC_NWINS 1024
#endif
#ifdef _KERNEL
/*
* macro to convert from milliseconds to hz without integer overflow
* Default version using only 32bits arithmetics.
* 64bit port can define 64bit version in their <machine/param.h>
* 0x20000 is safe for hz < 20000
*/
#ifndef mstohz
#define mstohz(ms) \
(__predict_false((ms) >= 0x20000) ? \
((ms +0u) / 1000u) * hz : \
((ms +0u) * hz) / 1000u)
#endif
#endif /* _KERNEL */
#endif /* !_SYS_PARAM_H_ */