442 lines
12 KiB
C
442 lines
12 KiB
C
/* $NetBSD: refclock_arbiter.c,v 1.3 1998/03/06 18:17:23 christos Exp $ */
|
|
|
|
/*
|
|
* refclock_arbiter - clock driver for Arbiter 1088A/B Satellite
|
|
* Controlled Clock
|
|
*/
|
|
|
|
#ifdef HAVE_CONFIG_H
|
|
#include <config.h>
|
|
#endif
|
|
|
|
#if defined(REFCLOCK) && defined(ARBITER)
|
|
|
|
#include <stdio.h>
|
|
#include <ctype.h>
|
|
#include <sys/time.h>
|
|
|
|
#include "ntpd.h"
|
|
#include "ntp_io.h"
|
|
#include "ntp_refclock.h"
|
|
#include "ntp_stdlib.h"
|
|
|
|
/*
|
|
* This driver supports the Arbiter 1088A/B Satellite Controlled Clock.
|
|
* The claimed accuracy of this clock is 100 ns relative to the PPS
|
|
* output when receiving four or more satellites.
|
|
*
|
|
* The receiver should be configured before starting the NTP daemon, in
|
|
* order to establish reliable position and operating conditions. It
|
|
* does not initiate surveying or hold mode. For use with NTP, the
|
|
* daylight savings time feature should be disables (D0 command) and the
|
|
* broadcast mode set to operate in UTC (BU command).
|
|
*
|
|
* The timecode format supported by this driver is selected by the poll
|
|
* sequence "B5", which initiates a line in the following format to be
|
|
* repeated once per second until turned off by the "B0" poll sequence.
|
|
*
|
|
* Format B5 (24 ASCII printing characters):
|
|
*
|
|
* <cr><lf>i yy ddd hh:mm:ss.000bbb
|
|
*
|
|
* on-time = <cr>
|
|
* i = synchronization flag (' ' = locked, '?' = unlocked)
|
|
* yy = year of century
|
|
* ddd = day of year
|
|
* hh:mm:ss = hours, minutes, seconds
|
|
* .000 = fraction of second (not used)
|
|
* bbb = tailing spaces for fill
|
|
*
|
|
* The alarm condition is indicated by a '?' at i, which indicates the
|
|
* receiver is not synchronized. In normal operation, a line consisting
|
|
* of the timecode followed by the time quality character (TQ) followed
|
|
* by the receiver status string (SR) is written to the clockstats file.
|
|
* The time quality character is encoded in IEEE P1344 standard:
|
|
*
|
|
* Format TQ (IEEE P1344 estimated worst-case time quality)
|
|
*
|
|
* 0 clock locked, maximum accuracy
|
|
* F clock failure, time not reliable
|
|
* 4 clock unlocked, accuracy < 1 us
|
|
* 5 clock unlocked, accuracy < 10 us
|
|
* 6 clock unlocked, accuracy < 100 us
|
|
* 7 clock unlocked, accuracy < 1 ms
|
|
* 8 clock unlocked, accuracy < 10 ms
|
|
* 9 clock unlocked, accuracy < 100 ms
|
|
* A clock unlocked, accuracy < 1 s
|
|
* B clock unlocked, accuracy < 10 s
|
|
*
|
|
* The status string is encoded as follows:
|
|
*
|
|
* Format SR (25 ASCII printing characters)
|
|
*
|
|
* V=vv S=ss T=t P=pdop E=ee
|
|
*
|
|
* vv = satellites visible
|
|
* ss = relative signal strength
|
|
* t = satellites tracked
|
|
* pdop = position dilution of precision (meters)
|
|
* ee = hardware errors
|
|
*
|
|
* If flag4 is set, an additional line consisting of the receiver
|
|
* latitude (LA), longitude (LO) and elevation (LH) (meters) is written
|
|
* to this file. If channel B is enabled for deviation mode and connected
|
|
* to a 1-PPS signal, the last two numbers on the line are the deviation
|
|
* and standard deviation averaged over the last 15 seconds.
|
|
*/
|
|
|
|
/*
|
|
* Interface definitions
|
|
*/
|
|
#define DEVICE "/dev/gps%d" /* device name and unit */
|
|
#define SPEED232 B9600 /* uart speed (9600 baud) */
|
|
#define PRECISION (-10) /* precision assumed (about 1 ms) */
|
|
#define REFID "GPS " /* reference ID */
|
|
#define DESCRIPTION "Arbiter 1088A/B GPS Receiver" /* WRU */
|
|
|
|
#define NSAMPLES 3 /* stages of median filter */
|
|
#define LENARB 24 /* format B5 timecode length */
|
|
#define MAXSTA 30 /* max length of status string */
|
|
#define MAXPOS 70 /* max length of position string */
|
|
|
|
/*
|
|
* Imported from ntp_timer module
|
|
*/
|
|
extern u_long current_time; /* current time (s) */
|
|
|
|
/*
|
|
* Imported from ntpd module
|
|
*/
|
|
extern int debug; /* global debug flag */
|
|
|
|
/*
|
|
* ARB unit control structure
|
|
*/
|
|
struct arbunit {
|
|
int pollcnt; /* poll message counter */
|
|
l_fp laststamp; /* last receive timestamp */
|
|
u_char tcswitch; /* timecode enable switch */
|
|
char qualchar; /* IEEE P1344 quality (TQ command) */
|
|
char status[MAXSTA]; /* receiver status (SR command) */
|
|
char latlon[MAXPOS]; /* receiver position (lat/lon/alt) */
|
|
};
|
|
|
|
/*
|
|
* Function prototypes
|
|
*/
|
|
static int arb_start P((int, struct peer *));
|
|
static void arb_shutdown P((int, struct peer *));
|
|
static void arb_receive P((struct recvbuf *));
|
|
static void arb_poll P((int, struct peer *));
|
|
|
|
/*
|
|
* Transfer vector
|
|
*/
|
|
struct refclock refclock_arbiter = {
|
|
arb_start, /* start up driver */
|
|
arb_shutdown, /* shut down driver */
|
|
arb_poll, /* transmit poll message */
|
|
noentry, /* not used (old arb_control) */
|
|
noentry, /* initialize driver (not used) */
|
|
noentry, /* not used (old arb_buginfo) */
|
|
NOFLAGS /* not used */
|
|
};
|
|
|
|
|
|
/*
|
|
* arb_start - open the devices and initialize data for processing
|
|
*/
|
|
static int
|
|
arb_start(unit, peer)
|
|
int unit;
|
|
struct peer *peer;
|
|
{
|
|
register struct arbunit *up;
|
|
struct refclockproc *pp;
|
|
int fd;
|
|
char device[20];
|
|
|
|
/*
|
|
* Open serial port. Use CLK line discipline, if available.
|
|
*/
|
|
(void)sprintf(device, DEVICE, unit);
|
|
#ifdef TTYCLK
|
|
if (!(fd = refclock_open(device, SPEED232, LDISC_CLK)))
|
|
#else
|
|
if (!(fd = refclock_open(device, SPEED232, 0)))
|
|
#endif /* TTYCLK */
|
|
return (0);
|
|
|
|
/*
|
|
* Allocate and initialize unit structure
|
|
*/
|
|
if (!(up = (struct arbunit *)
|
|
emalloc(sizeof(struct arbunit)))) {
|
|
(void) close(fd);
|
|
return (0);
|
|
}
|
|
memset((char *)up, 0, sizeof(struct arbunit));
|
|
pp = peer->procptr;
|
|
pp->io.clock_recv = arb_receive;
|
|
pp->io.srcclock = (caddr_t)peer;
|
|
pp->io.datalen = 0;
|
|
pp->io.fd = fd;
|
|
if (!io_addclock(&pp->io)) {
|
|
(void) close(fd);
|
|
free(up);
|
|
return (0);
|
|
}
|
|
pp->unitptr = (caddr_t)up;
|
|
|
|
/*
|
|
* Initialize miscellaneous variables
|
|
*/
|
|
peer->precision = PRECISION;
|
|
pp->clockdesc = DESCRIPTION;
|
|
memcpy((char *)&pp->refid, REFID, 4);
|
|
up->pollcnt = 2;
|
|
return (1);
|
|
}
|
|
|
|
|
|
/*
|
|
* arb_shutdown - shut down the clock
|
|
*/
|
|
static void
|
|
arb_shutdown(unit, peer)
|
|
int unit;
|
|
struct peer *peer;
|
|
{
|
|
register struct arbunit *up;
|
|
struct refclockproc *pp;
|
|
|
|
pp = peer->procptr;
|
|
up = (struct arbunit *)pp->unitptr;
|
|
io_closeclock(&pp->io);
|
|
free(up);
|
|
}
|
|
|
|
|
|
/*
|
|
* arb_receive - receive data from the serial interface
|
|
*/
|
|
static void
|
|
arb_receive(rbufp)
|
|
struct recvbuf *rbufp;
|
|
{
|
|
register struct arbunit *up;
|
|
struct refclockproc *pp;
|
|
struct peer *peer;
|
|
l_fp trtmp;
|
|
u_long ltemp;
|
|
int temp;
|
|
u_char syncchar; /* synchronization indicator */
|
|
u_char leapchar; /* leap indicator */
|
|
|
|
/*
|
|
* Initialize pointers and read the timecode and timestamp
|
|
*/
|
|
peer = (struct peer *)rbufp->recv_srcclock;
|
|
pp = peer->procptr;
|
|
up = (struct arbunit *)pp->unitptr;
|
|
temp = refclock_gtlin(rbufp, pp->a_lastcode, BMAX, &trtmp);
|
|
if (up->tcswitch)
|
|
return;
|
|
|
|
/*
|
|
* Note we get a buffer and timestamp for both a <cr> and <lf>,
|
|
* but only the <cr> timestamp is retained. The program first
|
|
* sends a TQ and expects the echo followed by the time quality
|
|
* character. It then sends a B5 starting the timecode broadcast
|
|
* and expects the echo followed some time later by the on-time
|
|
* character <cr> and then the <lf> beginning the timecode
|
|
* itself. Finally, at the <cr> beginning the next timecode at
|
|
* the next second, the program sends a B0 shutting down the the
|
|
* timecode broadcast.
|
|
*
|
|
* If flag4 is set, the program snatches the latitude, longitude
|
|
* and elevation and writes it to the clockstats file.
|
|
*/
|
|
if (temp == 0)
|
|
return;
|
|
pp->lastrec = up->laststamp;
|
|
up->laststamp = trtmp;
|
|
if (temp < 3)
|
|
return;
|
|
if (!strncmp(pp->a_lastcode, "TQ", 2)) {
|
|
up->qualchar = pp->a_lastcode[2];
|
|
write(pp->io.fd, "SR", 2);
|
|
return;
|
|
} else if (!strncmp(pp->a_lastcode, "SR", 2)) {
|
|
strcpy(up->status, pp->a_lastcode + 2);
|
|
if (pp->sloppyclockflag & CLK_FLAG4)
|
|
write(pp->io.fd, "LA", 2);
|
|
else
|
|
write(pp->io.fd, "B5", 2);
|
|
return;
|
|
} else if (!strncmp(pp->a_lastcode, "LA", 2)) {
|
|
strcpy(up->latlon, pp->a_lastcode + 2);
|
|
write(pp->io.fd, "LO", 2);
|
|
return;
|
|
} else if (!strncmp(pp->a_lastcode, "LO", 2)) {
|
|
strcat(up->latlon, " ");
|
|
strcat(up->latlon, pp->a_lastcode + 2);
|
|
write(pp->io.fd, "LH", 2);
|
|
return;
|
|
} else if (!strncmp(pp->a_lastcode, "LH", 2)) {
|
|
strcat(up->latlon, " ");
|
|
strcat(up->latlon, pp->a_lastcode + 2);
|
|
write(pp->io.fd, "DB", 2);
|
|
return;
|
|
} else if (!strncmp(pp->a_lastcode, "DB", 2)) {
|
|
strcat(up->latlon, " ");
|
|
strcat(up->latlon, pp->a_lastcode + 2);
|
|
record_clock_stats(&peer->srcadr, up->latlon);
|
|
write(pp->io.fd, "B5", 2);
|
|
return;
|
|
}
|
|
write(pp->io.fd, "B0", 2);
|
|
pp->lencode = temp;
|
|
up->pollcnt = 2;
|
|
up->tcswitch++;
|
|
|
|
#ifdef DEBUG
|
|
if (debug)
|
|
printf("arbiter: timecode %d %s\n", pp->lencode,
|
|
pp->a_lastcode);
|
|
#endif
|
|
|
|
/*
|
|
* We get down to business, check the timecode format and decode
|
|
* its contents. If the timecode has valid length, but not in
|
|
* proper format, we declare bad format and exit. If the
|
|
* timecode has invalid length, which sometimes occurs when the
|
|
* B0 amputates the broadcast, we just quietly steal away. Note
|
|
* that the time quality character and receiver status string is
|
|
* tacked on the end for clockstats display.
|
|
*/
|
|
if (pp->lencode == LENARB) {
|
|
/*
|
|
* Timecode format B5: "i yy ddd hh:mm:ss.000 "
|
|
*/
|
|
pp->a_lastcode[LENARB - 2] = up->qualchar;
|
|
strcat(pp->a_lastcode, up->status);
|
|
record_clock_stats(&peer->srcadr, pp->a_lastcode);
|
|
syncchar = leapchar = ' ';
|
|
if (sscanf(pp->a_lastcode, "%c%2d %3d %2d:%2d:%2d",
|
|
&syncchar, &pp->year, &pp->day, &pp->hour,
|
|
&pp->minute, &pp->second) != 6) {
|
|
refclock_report(peer, CEVNT_BADREPLY);
|
|
return;
|
|
}
|
|
} else {
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* We decode the clock dispersion from the time quality
|
|
* character. This assumes dispersion increases at about 1 ms
|
|
* per minute, or about 16 ppm, which may even be a reasonable
|
|
* figure for the radio clock oscillator. If the clock has not
|
|
* yet tracked any satellites or failed, the leap bits are
|
|
* marked unsynchronized.
|
|
*/
|
|
switch (up->qualchar) {
|
|
|
|
case '0': /* locked, max accuracy */
|
|
case '4': /* unlock accuracy < 1 us */
|
|
case '5': /* unlock accuracy < 10 us */
|
|
ltemp = 0;
|
|
break;
|
|
|
|
case '6': /* unlock accuracy < 100 us */
|
|
ltemp = 6;
|
|
break;
|
|
|
|
case '7': /* unlock accuracy < 1 ms */
|
|
ltemp = 63;
|
|
break;
|
|
|
|
case '8': /* unlock accuracy < 10 ms */
|
|
ltemp = 625;
|
|
break;
|
|
|
|
case '9': /* unlock accuracy < 100 ms */
|
|
ltemp = 6250;
|
|
break;
|
|
|
|
case 'A': /* unlock accuracy < 1 s */
|
|
ltemp = 62500;
|
|
break;
|
|
|
|
case 'B': /* unlock accuracy < 10 s */
|
|
case 'F': /* clock failure */
|
|
ltemp = NTP_MAXAGE;
|
|
pp->leap = LEAP_NOTINSYNC;
|
|
return;
|
|
|
|
default:
|
|
ltemp = NTP_MAXAGE;
|
|
pp->leap = LEAP_NOTINSYNC;
|
|
refclock_report(peer, CEVNT_BADREPLY);
|
|
return;
|
|
}
|
|
pp->leap = 0;
|
|
pp->lasttime = current_time - ltemp;
|
|
|
|
/*
|
|
* Process the new sample in the median filter and determine the
|
|
* reference clock offset and dispersion. We use lastrec as both
|
|
* the reference time and receive time in order to avoid being
|
|
* cute, like setting the reference time later than the receive
|
|
* time, which may cause a paranoid protocol module to chuck out
|
|
* the data.
|
|
*/
|
|
if (!refclock_process(pp, NSAMPLES, NSAMPLES)) {
|
|
refclock_report(peer, CEVNT_BADTIME);
|
|
return;
|
|
}
|
|
trtmp = pp->lastrec;
|
|
trtmp.l_ui -= ltemp;
|
|
refclock_receive(peer, &pp->offset, 0, pp->dispersion,
|
|
&trtmp, &pp->lastrec, pp->leap);
|
|
}
|
|
|
|
|
|
/*
|
|
* arb_poll - called by the transmit procedure
|
|
*/
|
|
static void
|
|
arb_poll(unit, peer)
|
|
int unit;
|
|
struct peer *peer;
|
|
{
|
|
register struct arbunit *up;
|
|
struct refclockproc *pp;
|
|
|
|
/*
|
|
* Time to poll the clock. The Arbiter clock responds to a "B5"
|
|
* by returning a timecode in the format specified above.
|
|
* Transmission occurs once per second, unless turned off by a
|
|
* "B0". Note there is no checking on state, since this may not
|
|
* be the only customer reading the clock. Only one customer
|
|
* need poll the clock; all others just listen in. If nothing is
|
|
* heard from the clock for two polls, declare a timeout and
|
|
* keep going.
|
|
*/
|
|
pp = peer->procptr;
|
|
up = (struct arbunit *)pp->unitptr;
|
|
if (up->pollcnt == 0)
|
|
refclock_report(peer, CEVNT_TIMEOUT);
|
|
else
|
|
up->pollcnt--;
|
|
if (write(pp->io.fd, "TQ", 2) != 2) {
|
|
refclock_report(peer, CEVNT_FAULT);
|
|
} else
|
|
pp->polls++;
|
|
up->tcswitch = 0;
|
|
|
|
}
|
|
|
|
#endif
|