NetBSD/sys/arch/i386/boot/bios.S

330 lines
6.6 KiB
ArmAsm

/* $NetBSD: bios.S,v 1.6 1994/10/27 04:14:31 cgd Exp $ */
/*
* Ported to boot 386BSD by Julian Elischer (julian@tfs.com) Sept 1992
*
* Mach Operating System
* Copyright (c) 1992, 1991 Carnegie Mellon University
* All Rights Reserved.
*
* Permission to use, copy, modify and distribute this software and its
* documentation is hereby granted, provided that both the copyright
* notice and this permission notice appear in all copies of the
* software, derivative works or modified versions, and any portions
* thereof, and that both notices appear in supporting documentation.
*
* CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
* CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR
* ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
*
* Carnegie Mellon requests users of this software to return to
*
* Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU
* School of Computer Science
* Carnegie Mellon University
* Pittsburgh PA 15213-3890
*
* any improvements or extensions that they make and grant Carnegie Mellon
* the rights to redistribute these changes.
*/
/*
Copyright 1988, 1989, 1990, 1991, 1992
by Intel Corporation, Santa Clara, California.
All Rights Reserved
Permission to use, copy, modify, and distribute this software and
its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appears in all
copies and that both the copyright notice and this permission notice
appear in supporting documentation, and that the name of Intel
not be used in advertising or publicity pertaining to distribution
of the software without specific, written prior permission.
INTEL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS,
IN NO EVENT SHALL INTEL BE LIABLE FOR ANY SPECIAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
LOSS OF USE, DATA OR PROFITS, WHETHER IN ACTION OF CONTRACT,
NEGLIGENCE, OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
.file "bios.s"
#include "asm.h"
.text
/*
# biosread(dev, cyl, head, sec, nsec, offset)
# Read "nsec" sectors from disk to offset "offset" in boot segment
# BIOS call "INT 0x13 Function 0x2" to read sectors from disk into memory
# Call with %ah = 0x2
# %al = number of sectors
# %ch = cylinder
# %cl = sector
# %dh = head
# %dl = drive (0x80 for hard disk, 0x0 for floppy disk)
# %es:%bx = segment:offset of buffer
# Return:
# %al = 0x0 on success; err code on failure
*/
ENTRY(biosread)
pushl %ebp
movl %esp, %ebp
pushl %ebx
pushl %ecx
pushl %edx
pushl %es
movb 0x10(%ebp), %dh
movw 0x0c(%ebp), %cx
xchgb %ch, %cl # cylinder; the highest 2 bits of cyl is in %cl
rorb $2, %cl
movb 0x14(%ebp), %al
orb %al, %cl
incb %cl # sector; sec starts from 1, not 0
movb 0x8(%ebp), %dl # device
movl 0x1c(%ebp), %ebx # offset
# prot_to_real will set %es to BOOTSEG
call EXT(prot_to_real) # enter real mode
movb $0x2, %ah # subfunction
addr32
movb 0x18(%ebp), %al # number of sectors
sti
int $0x13
cli
movl %eax, %ebx # save return value (actually movw %ax, %bx)
data32
call EXT(real_to_prot) # back to protected mode
xorl %eax, %eax
movb %bh, %al # return value in %ax
popl %es
popl %edx
popl %ecx
popl %ebx
popl %ebp
ret
/*
# putc(ch)
# BIOS call "INT 10H Function 0Eh" to write character to console
# Call with %ah = 0x0e
# %al = character
# %bh = page
# %bl = foreground color ( graphics modes)
*/
ENTRY(putc)
pushl %ebp
movl %esp, %ebp
pushl %ebx
pushl %ecx
movb 0x8(%ebp), %cl
call EXT(prot_to_real)
data32
movl $0x1, %ebx # %bh=0, %bl=1 (blue)
movb $0xe, %ah
movb %cl, %al
sti
int $0x10 # display a byte
cli
data32
call EXT(real_to_prot)
popl %ecx
popl %ebx
popl %ebp
ret
/*
# getc()
# BIOS call "INT 16H Function 00H" to read character from keyboard
# Call with %ah = 0x0
# Return: %ah = keyboard scan code
# %al = ASCII character
*/
ENTRY(getc)
pushl %ebp
movl %esp, %ebp
pushl %ebx # save %ebx
call EXT(prot_to_real)
movb $0x0, %ah
sti
int $0x16
cli
movb %al, %bl # real_to_prot uses %eax
data32
call EXT(real_to_prot)
xorl %eax, %eax
movb %bl, %al
popl %ebx
popl %ebp
ret
/*
# ischar()
# if there is a character pending, return it; otherwise return 0
# BIOS call "INT 16H Function 01H" to check whether a character is pending
# Call with %ah = 0x1
# Return:
# If key waiting to be input:
# %ah = keyboard scan code
# %al = ASCII character
# Zero flag = clear
# else
# Zero flag = set
*/
ENTRY(ischar)
pushl %ebp
movl %esp, %ebp
pushl %ebx
call EXT(prot_to_real) # enter real mode
xorl %ebx, %ebx
movb $0x1, %ah
sti
int $0x16
cli
data32
jz nochar
movb %al, %bl
nochar:
data32
call EXT(real_to_prot)
xorl %eax, %eax
movb %bl, %al
popl %ebx
popl %ebp
ret
/*
#
# get_diskinfo(): return a word that represents the
# max number of sectors and heads and drives for this device
#
*/
ENTRY(get_diskinfo)
pushl %ebp
movl %esp, %ebp
pushl %es
pushl %ebx
pushl %ecx
pushl %edx
movb 0x8(%ebp), %dl # diskinfo(drive #)
call EXT(prot_to_real) # enter real mode
movb $0x8, %ah # ask for disk info
sti
int $0x13
cli
jnc ok
/*
* Urk. Call failed. It is not supported for floppies by old BIOS's.
* Guess it's a 15-sector floppy. Initialize all the registers for
* documentation, although we only need head and sector counts.
*/
subb %ah, %ah # %ax = 0
movb %ah, %bh # %bh = 0
movb $2, %bl # %bl bits 0-3 = drive type, 2 = 1.2M
movb $79, %ch # max track
movb $15, %cl # max sector
movb $1, %dh # max head
movb $1, %dl # # floppy drives installed
# es:di = parameter table
# carry = 0
ok:
data32
call EXT(real_to_prot) # back to protected mode
xor %eax, %eax
/*form a longword representing all this gunk*/
movb %dh, %ah # max head
andb $0x3f, %cl # mask of cylinder gunk
movb %cl, %al # max sector (and # sectors)
popl %edx
popl %ecx
popl %ebx
popl %es
popl %ebp
ret
/*
#
# memsize(i) : return the memory size in KB. i == 0 for conventional memory,
# i == 1 for extended memory
# BIOS call "INT 12H" to get conventional memory size
# BIOS call "INT 15H, AH=88H" to get extended memory size
# Both have the return value in AX.
#
*/
ENTRY(memsize)
pushl %ebp
movl %esp, %ebp
pushl %ebx
movl 8(%ebp), %ebx
call EXT(prot_to_real) # enter real mode
testb %bl, %bl
data32
jnz xext
sti
int $0x12
cli
data32
jmp xdone
xext: movb $0x88, %ah
sti
int $0x15
cli
xdone:
movl %eax, %ebx
data32
call EXT(real_to_prot)
movl %ebx, %eax
popl %ebx
popl %ebp
ret