228 lines
7.0 KiB
Plaintext
228 lines
7.0 KiB
Plaintext
# $NetBSD: GENERIC,v 1.24 2000/01/24 08:04:11 soda Exp $
|
|
# $OpenBSD: GENERIC,v 1.17 1997/05/18 13:45:23 pefo Exp $
|
|
#
|
|
# Generic configuration file for MIPS R4x00 ARC Systems
|
|
#
|
|
|
|
include "arch/arc/conf/std.arc"
|
|
|
|
#ident "GENERIC-$Revision: 1.24 $"
|
|
|
|
maxusers 32
|
|
|
|
# Need to set locally
|
|
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
|
|
|
|
# Standard system options
|
|
options KTRACE # system call tracing support
|
|
#options LKM # Loadable Kernel Modules
|
|
#options NTP # NTP phase/frequency locked loop
|
|
|
|
# Diagnostic/debugging support options
|
|
options DIAGNOSTIC # extra kernel debugging checks
|
|
options DEBUG # extra kernel debugging support
|
|
|
|
# System V options
|
|
options SYSVMSG # System V-like message queues
|
|
options SYSVSEM # System V-like semaphores
|
|
options SYSVSHM # System V-like memory sharing
|
|
options SHMMAXPGS=1024 # 1024 pages is the default
|
|
|
|
# Filesystem options
|
|
file-system FFS # fast filesystem
|
|
file-system MFS # memory-based filesystem
|
|
#file-system LFS # Log-based filesystem (still experimental)
|
|
file-system CD9660 # ISO 9660 + Rock Ridge file system
|
|
file-system MSDOSFS # Ability to read write MS-Dos filsystem
|
|
file-system NFS # Sun NFS-compatible filesystem (client)
|
|
file-system KERNFS # kernel data-structure filesystem
|
|
file-system PROCFS # /proc
|
|
file-system FDESC # user file descriptor filesystem
|
|
#file-system UMAPFS # uid/gid remapping filesystem
|
|
#file-system UNION # union file system
|
|
#file-system NULLFS # null layer filesystem
|
|
#file-system OVERLAY # overlay file system
|
|
#file-system PORTAL # portal filesystem (still experimental)
|
|
|
|
options QUOTA # FFS quotas
|
|
#options FFS_EI # FFS Endian Independant support
|
|
#options SOFTDEP # FFS soft updates support.
|
|
options NFSSERVER # Sun NFS-compatible filesystem (server)
|
|
|
|
#options SCSIVERBOSE # Verbose SCSI errors
|
|
|
|
# Pull in config fragments for kernel crypto. This is required for
|
|
# options IPSEC etc. to work. If you want to run with IPSEC, uncomment
|
|
# one of these, based on whether you use crypto-us or crypto-intl, and
|
|
# adjust the prefixes as necessary.
|
|
|
|
#prefix ../crypto-us/sys
|
|
#cinclude "conf/files.crypto-us"
|
|
#prefix
|
|
|
|
#prefix ../crypto-intl/sys
|
|
#cinclude "conf/files.crypto-intl"
|
|
#prefix
|
|
|
|
# Networking options
|
|
#options GATEWAY # IP packet forwarding
|
|
options INET # Internet protocols
|
|
#options INET6 # IPV6
|
|
#options IPSEC # IP security
|
|
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
|
|
#options IPSEC_DEBUG # debug for IP security
|
|
#options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP
|
|
#options MULTICAST # Multicast support
|
|
#options MROUTING # Multicast routing support
|
|
#options NS # XNS
|
|
#options IPX # IPX+SPX
|
|
#options ISO,TPIP # OSI networking
|
|
#options EON # OSI tunneling over IP
|
|
#options CCITT,LLC,HDLC # X.25
|
|
#options PFIL_HOOKS # pfil(9) packet filter hooks.
|
|
|
|
# Compatibilitry modules
|
|
options COMPAT_43 # compatibility with 4.3BSD binaries
|
|
options COMPAT_11
|
|
options COMPAT_12
|
|
options COMPAT_13
|
|
options COMPAT_14
|
|
#options COMPAT_ULTRIX # Ultrix binary compatibility (no go yet)
|
|
options COMPAT_386BSD_MBRPART # recognize old partition ID
|
|
|
|
options "NKMEMCLUSTERS=1024" # 4K pages in kernel malloc pool
|
|
#options KGDB # support for kernel gdb
|
|
#options "KGDBRATE=19200" # kernel gdb port rate (default 9600)
|
|
#options "KGDBDEV=15*256+0" # device for kernel gdb
|
|
|
|
# Special options
|
|
options MACHINE_NONCONTIG # Support noncontigous memory.
|
|
|
|
options NFS_BOOT_BOOTP,NFS_BOOT_BOOTPARAM
|
|
|
|
config netbsd root on ? type ?
|
|
|
|
#
|
|
# Definition of system
|
|
#
|
|
mainbus0 at root
|
|
cpu* at mainbus0
|
|
|
|
#### Main local buses
|
|
|
|
pica* at mainbus0 # ACER Pica systems local bus.
|
|
isabr* at mainbus0 # ISA Bus bridge (std ISA bus).
|
|
|
|
#### PICA bus devices
|
|
|
|
aclock0 at pica?
|
|
pc0 at pica?
|
|
opms0 at pica?
|
|
com0 at pica?
|
|
com1 at pica?
|
|
lpt0 at pica?
|
|
sn0 at pica?
|
|
|
|
fdc0 at pica?
|
|
fd* at fdc? drive ?
|
|
|
|
asc0 at pica?
|
|
scsibus* at asc?
|
|
|
|
#### ISA Bus.
|
|
|
|
isa* at isabr?
|
|
|
|
aclock0 at isa? port 0x70 irq 0
|
|
|
|
pc0 at isa? port 0x60 irq 1 # generic PC console device
|
|
com0 at isa? port 0x3f8 irq 4
|
|
com1 at isa? port 0x2f8 irq 3
|
|
com2 at isa? port 0x3e8 irq 4
|
|
com3 at isa? port 0x2e8 irq 3
|
|
|
|
# ISA ST506, ESDI, and IDE controllers
|
|
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
|
|
# fall back to 16bits I/O if 32bits I/O are not functional).
|
|
# Some controllers pass the initial 32bit test, but will fail later.
|
|
# XXX - should be configured
|
|
#wdc0 at isa? port 0x1f0 irq 14 flags 0x00
|
|
##wdc1 at isa? port 0x170 irq 15 flags 0x00
|
|
|
|
# IDE drives
|
|
# Flags are used only with controllers that support DMA operations
|
|
# and mode settings (e.g. some pciide controllers)
|
|
# The lowest order four bits (rightmost digit) of the flags define the PIO
|
|
# mode to use, the next set of four bits the DMA mode and the third set the
|
|
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
|
|
# to use, and the last bit must be 1 for this setting to be used.
|
|
# For DMA and UDMA, 0xf (1111) means 'disable'.
|
|
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
|
|
# (0xc=1100, 0xa=1010, 0xf=1111)
|
|
# 0x0000 means "use whatever the drive claims to support".
|
|
# XXX - should be configured
|
|
#wd* at wdc? channel ? drive ? flags 0x0000
|
|
|
|
# ATAPI bus support
|
|
# XXX - should be configured
|
|
#atapibus* at wdc? channel ?
|
|
|
|
# ATAPI devices
|
|
# flags have the same meaning as for IDE drives.
|
|
# XXX - should be configured
|
|
#cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
|
|
#sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
|
|
#uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
|
|
|
|
|
|
# Parallel Printer Interfaces
|
|
|
|
lpt0 at isa? port 0x378 irq 7
|
|
|
|
|
|
# Network Interfaces
|
|
|
|
# XXX - should fix conflict with files.isa
|
|
#ec0 at isa? port 0x250 iomem 0xd8000 irq 9 # 3Com 3c503 Ethernet
|
|
# XXX - should fix conflict with files.isa
|
|
#ep0 at isa? port ? irq ? # 3C509 ethernet cards
|
|
# XXX - should fix conflict with files.isa
|
|
#ne0 at isa? port 0x280 irq 9 # NE[12]000 ethernet cards
|
|
#ne1 at isa? port 0x300 irq 10
|
|
#we0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC Ethernet
|
|
#we1 at isa? port 0x300 iomem 0xcc000 irq 10
|
|
|
|
# XXX - should be configured
|
|
#btl0 at isa? port 0x330 irq ? drq ?
|
|
#scsibus* at btl?
|
|
|
|
#### SCSI Bus devices
|
|
|
|
sd* at scsibus? target ? lun ?
|
|
st* at scsibus? target ? lun ?
|
|
cd* at scsibus? target ? lun ?
|
|
ch* at scsibus? target ? lun ?
|
|
ss* at scsibus? target ? lun ?
|
|
uk* at scsibus? target ? lun ?
|
|
|
|
#### PSEUDO Devices
|
|
|
|
pseudo-device loop 1 # network loopback
|
|
pseudo-device bpfilter 8 # packet filter ports
|
|
#pseudo-device gre 2 # generic L3 over IP tunnel
|
|
pseudo-device sl 2 # serial-line IP ports
|
|
pseudo-device ppp 2 # serial-line PPP ports
|
|
pseudo-device tun 2 # network tunneling over tty
|
|
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
|
|
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
|
|
pseudo-device ipfilter # ip filter
|
|
|
|
pseudo-device pty 64 # pseudo ptys
|
|
pseudo-device tb 1 # tablet line discipline
|
|
pseudo-device vnd 4 # paging to files
|
|
pseudo-device ccd 4 # concatenated disk devices
|
|
#pseudo-device raid 4 # RAIDframe disk driver
|
|
#pseudo-device md 1 # memory disk devices
|
|
# rnd is EXPERIMENTAL
|
|
#pseudo-device rnd # /dev/random and in-kernel generator
|