NetBSD/sys/dev/pci/viapm.c

150 lines
4.0 KiB
C

/* $NetBSD: viapm.c,v 1.16 2006/11/16 01:33:10 christos Exp $ */
/*
* Copyright (c) 2000 Johan Danielsson
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of author nor the names of any contributors may
* be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* frontend for the power management device in the VIA VT82C686a South
* Bridge. It (the chip) has three functions, power management, hardware
* monitoring, and an SMBus controller. A driver for the hardware monitoring
* is provided by the viaenv driver
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: viapm.c,v 1.16 2006/11/16 01:33:10 christos Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcidevs.h>
#include <dev/pci/viapmvar.h>
struct viapm_softc {
struct device sc_dev;
pci_chipset_tag_t sc_pc;
pcitag_t sc_tag;
bus_space_tag_t sc_iot;
};
static int
viapm_match(struct device *parent, struct cfdata *match,
void *aux)
{
struct pci_attach_args *pa = aux;
if (PCI_VENDOR(pa->pa_id) != PCI_VENDOR_VIATECH)
return 0;
switch (PCI_PRODUCT(pa->pa_id)) {
case PCI_PRODUCT_VIATECH_VT82C686A_SMB:
#ifdef notyet
case PCI_PRODUCT_VIATECH_VT8231_PWR:
#endif
return 1;
default:
return 0;
}
}
static const char *
viapm_device_name(enum vapm_devtype type)
{
switch (type) {
case VIAPM_POWER:
return "power management";
case VIAPM_HWMON:
return "hardware monitor";
case VIAPM_SMBUS:
return "SMBus controller";
default:
panic("viapm_device_name: unknown type");
}
}
static int
viapm_print(void *aux, const char *pnp)
{
struct viapm_attach_args *vaa = aux;
if (pnp)
aprint_normal("%s at %s", viapm_device_name(vaa->va_type), pnp);
return UNCONF;
}
static void
viapm_attach(struct device *parent, struct device *self, void *aux)
{
struct viapm_softc *sc = (struct viapm_softc *) self;
struct pci_attach_args *pa = aux;
struct viapm_attach_args vaa;
printf("\n");
sc->sc_pc = pa->pa_pc;
sc->sc_tag = pa->pa_tag;
sc->sc_iot = pa->pa_iot;
vaa.va_pc = sc->sc_pc;
vaa.va_tag = sc->sc_tag;
vaa.va_iot = sc->sc_iot;
#if 0
/*
* no point in confusing people with these until there are drivers for
* them
*/
vaa.va_type = VIAPM_POWER;
vaa.va_offset = 0x40;
config_found_ia(self, "viapm", &vaa, viapm_print);
#endif
vaa.va_type = VIAPM_HWMON;
vaa.va_offset = 0x70;
config_found_ia(self, "viapm", &vaa, viapm_print);
#if 0
vaa.va_type = VIAPM_SMBUS;
vaa.va_offset = 0x93;
config_found_ia(self, "viapm", &vaa, viapm_print);
#endif
}
CFATTACH_DECL(viapm, sizeof(struct viapm_softc),
viapm_match, viapm_attach, NULL, NULL);