NetBSD/usr.sbin/dhcp/server/dhcpd.conf

91 lines
3.1 KiB
ISCdhcpd

# dhcpd.conf
#
# Sample configuration file for ISC dhcpd
#
# option definitions common to all supported networks...
option domain-name "fugue.com";
option domain-name-servers toccata.fugue.com;
option subnet-mask 255.255.255.224;
default-lease-time 600;
max-lease-time 7200;
subnet 204.254.239.0 netmask 255.255.255.224 {
range 204.254.239.10 204.254.239.20;
option broadcast-address 204.254.239.31;
option routers prelude.fugue.com;
}
# The other subnet that shares this physical network
subnet 204.254.239.32 netmask 255.255.255.224 {
range dynamic-bootp 204.254.239.10 204.254.239.20;
option broadcast-address 204.254.239.31;
option routers snarg.fugue.com;
}
subnet 192.5.5.0 netmask 255.255.255.224 {
range 192.5.5.26 192.5.5.30;
option name-servers bb.home.vix.com, gw.home.vix.com;
option domain-name "vix.com";
option routers 192.5.5.1;
option subnet-mask 255.255.255.224;
option broadcast-address 192.5.5.31;
default-lease-time 600;
max-lease-time 7200;
}
# Hosts which require special configuration options can be listed in
# host statements. If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.
host passacaglia {
hardware ethernet 0:0:c0:5d:bd:95;
filename "vmunix.passacaglia";
server-name "toccata.fugue.com";
}
# Fixed IP addresses can also be specified for hosts. These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP. Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
host fantasia {
hardware ethernet 08:00:07:26:c0:a5;
fixed-address fantasia.fugue.com;
}
# If a DHCP or BOOTP client is mobile and might be connected to a variety
# of networks, more than one fixed address for that host can be specified.
# Hosts can have fixed addresses on some networks, but receive dynamically
# allocated address on other subnets; in order to support this, a host
# declaration for that client must be given which does not have a fixed
# address. If a client should get different parameters depending on
# what subnet it boots on, host declarations for each such network should
# be given. Finally, if a domain name is given for a host's fixed address
# and that domain name evaluates to more than one address, the address
# corresponding to the network to which the client is attached, if any,
# will be assigned.
host confusia {
hardware ethernet 02:03:04:05:06:07;
fixed-address confusia-1.fugue.com, confusia-2.fugue.com;
filename "vmunix.confusia";
server-name "toccata.fugue.com";
}
host confusia {
hardware ethernet 02:03:04:05:06:07;
fixed-address confusia-3.fugue.com;
filename "vmunix.confusia";
server-name "snarg.fugue.com";
}
host confusia {
hardware ethernet 02:03:04:05:06:07;
filename "vmunix.confusia";
server-name "bb.home.vix.com";
}