6c521b3fcc
issueing a 'DIOCGPART' at every read. Avoid re-reading the label at every format-verify (or read/write on the block-device) by fetching the label at open-time and caching it until we close.
1644 lines
38 KiB
C
1644 lines
38 KiB
C
/* $NetBSD: hdfd.c,v 1.27 2000/08/29 20:00:16 leo Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1996 Leo Weppelman
|
|
* Copyright (c) 1993, 1994, 1995, 1996
|
|
* Charles M. Hannum. All rights reserved.
|
|
* Copyright (c) 1990 The Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* Don Ahn.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of
|
|
* California, Berkeley and its contributors.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @(#)fd.c 7.4 (Berkeley) 5/25/91
|
|
*/
|
|
|
|
/*
|
|
* Floppy formatting facilities merged from FreeBSD fd.c driver:
|
|
* Id: fd.c,v 1.53 1995/03/12 22:40:56 joerg Exp
|
|
* which carries the same copyright/redistribution notice as shown above with
|
|
* the addition of the following statement before the "Redistribution and
|
|
* use ..." clause:
|
|
*
|
|
* Copyright (c) 1993, 1994 by
|
|
* jc@irbs.UUCP (John Capo)
|
|
* vak@zebub.msk.su (Serge Vakulenko)
|
|
* ache@astral.msk.su (Andrew A. Chernov)
|
|
*
|
|
* Copyright (c) 1993, 1994, 1995 by
|
|
* joerg_wunsch@uriah.sax.de (Joerg Wunsch)
|
|
* dufault@hda.com (Peter Dufault)
|
|
*/
|
|
|
|
#include "opt_ddb.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/callout.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/file.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/device.h>
|
|
#include <sys/disklabel.h>
|
|
#include <sys/dkstat.h>
|
|
#include <sys/disk.h>
|
|
#include <sys/buf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/uio.h>
|
|
#include <sys/syslog.h>
|
|
#include <sys/queue.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/fdio.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/device.h>
|
|
|
|
#include <uvm/uvm_extern.h>
|
|
|
|
#include <machine/cpu.h>
|
|
#include <machine/bus.h>
|
|
#include <machine/iomap.h>
|
|
#include <machine/mfp.h>
|
|
|
|
#include <atari/dev/hdfdreg.h>
|
|
#include <atari/atari/intr.h>
|
|
#include <atari/atari/device.h>
|
|
|
|
#include "locators.h"
|
|
|
|
/*
|
|
* {b,c}devsw[] function prototypes
|
|
*/
|
|
dev_type_open(fdopen);
|
|
dev_type_close(fdclose);
|
|
dev_type_read(fdread);
|
|
dev_type_write(fdwrite);
|
|
dev_type_ioctl(fdioctl);
|
|
dev_type_size(fdsize);
|
|
dev_type_dump(fddump);
|
|
|
|
volatile u_char *fdio_addr;
|
|
|
|
#define wrt_fdc_reg(reg, val) { fdio_addr[reg] = val; }
|
|
#define rd_fdc_reg(reg) ( fdio_addr[reg] )
|
|
|
|
#define fdc_ienable() MFP2->mf_ierb |= IB_DCHG;
|
|
|
|
/*
|
|
* Interface to the pseudo-dma handler
|
|
*/
|
|
void fddma_intr(void);
|
|
caddr_t fddmaaddr = NULL;
|
|
int fddmalen = 0;
|
|
|
|
extern void mfp_hdfd_nf __P((void)), mfp_hdfd_fifo __P((void));
|
|
|
|
/*
|
|
* Argument to fdcintr.....
|
|
*/
|
|
static void *intr_arg = NULL; /* XXX: arg. to intr_establish() */
|
|
|
|
|
|
|
|
#define FDUNIT(dev) (minor(dev) / 8)
|
|
#define FDTYPE(dev) (minor(dev) % 8)
|
|
|
|
/* XXX misuse a flag to identify format operation */
|
|
#define B_FORMAT B_XXX
|
|
|
|
enum fdc_state {
|
|
DEVIDLE = 0,
|
|
MOTORWAIT,
|
|
DOSEEK,
|
|
SEEKWAIT,
|
|
SEEKTIMEDOUT,
|
|
SEEKCOMPLETE,
|
|
DOIO,
|
|
IOCOMPLETE,
|
|
IOTIMEDOUT,
|
|
DORESET,
|
|
RESETCOMPLETE,
|
|
RESETTIMEDOUT,
|
|
DORECAL,
|
|
RECALWAIT,
|
|
RECALTIMEDOUT,
|
|
RECALCOMPLETE,
|
|
};
|
|
|
|
/* software state, per controller */
|
|
struct fdc_softc {
|
|
struct device sc_dev; /* boilerplate */
|
|
|
|
struct callout sc_timo_ch; /* timeout callout */
|
|
struct callout sc_intr_ch; /* pseudo-intr callout */
|
|
|
|
struct fd_softc *sc_fd[4]; /* pointers to children */
|
|
TAILQ_HEAD(drivehead, fd_softc) sc_drives;
|
|
enum fdc_state sc_state;
|
|
int sc_errors; /* number of retries so far */
|
|
int sc_overruns; /* number of overruns so far */
|
|
u_char sc_status[7]; /* copy of registers */
|
|
};
|
|
|
|
/* controller driver configuration */
|
|
int fdcprobe __P((struct device *, struct cfdata *, void *));
|
|
int fdprint __P((void *, const char *));
|
|
void fdcattach __P((struct device *, struct device *, void *));
|
|
|
|
struct cfattach fdc_ca = {
|
|
sizeof(struct fdc_softc), fdcprobe, fdcattach
|
|
};
|
|
|
|
/*
|
|
* Floppies come in various flavors, e.g., 1.2MB vs 1.44MB; here is how
|
|
* we tell them apart.
|
|
*/
|
|
struct fd_type {
|
|
int sectrac; /* sectors per track */
|
|
int heads; /* number of heads */
|
|
int seccyl; /* sectors per cylinder */
|
|
int secsize; /* size code for sectors */
|
|
int datalen; /* data len when secsize = 0 */
|
|
int steprate; /* step rate and head unload time */
|
|
int gap1; /* gap len between sectors */
|
|
int gap2; /* formatting gap */
|
|
int tracks; /* total num of tracks */
|
|
int size; /* size of disk in sectors */
|
|
int step; /* steps per cylinder */
|
|
int rate; /* transfer speed code */
|
|
u_char fillbyte; /* format fill byte */
|
|
u_char interleave; /* interleave factor (formatting) */
|
|
char *name;
|
|
};
|
|
|
|
/*
|
|
* The order of entries in the following table is important -- BEWARE!
|
|
* The order of the types is the same as for the TT/Falcon....
|
|
*/
|
|
struct fd_type fd_types[] = {
|
|
/* 360kB in 720kB drive */
|
|
{ 9,2,18,2,0xff,0xdf,0x2a,0x50,40, 720,2,FDC_125KBPS,0xf6,1,"360KB" },
|
|
/* 3.5" 720kB diskette */
|
|
{ 9,2,18,2,0xff,0xdf,0x2a,0x50,80,1440,1,FDC_125KBPS,0xf6,1,"720KB" },
|
|
/* 1.44MB diskette */
|
|
{ 18,2,36,2,0xff,0xcf,0x1b,0x6c,80,2880,1,FDC_250KBPS,0xf6,1,"1.44MB" },
|
|
};
|
|
|
|
/* software state, per disk (with up to 4 disks per ctlr) */
|
|
struct fd_softc {
|
|
struct device sc_dev;
|
|
struct disk sc_dk;
|
|
|
|
struct fd_type *sc_deftype; /* default type descriptor */
|
|
struct fd_type *sc_type; /* current type descriptor */
|
|
|
|
struct callout sc_motoron_ch;
|
|
struct callout sc_motoroff_ch;
|
|
|
|
daddr_t sc_blkno; /* starting block number */
|
|
int sc_bcount; /* byte count left */
|
|
int sc_opts; /* user-set options */
|
|
int sc_skip; /* bytes already transferred */
|
|
int sc_nblks; /* #blocks currently tranferring */
|
|
int sc_nbytes; /* #bytes currently tranferring */
|
|
|
|
int sc_drive; /* physical unit number */
|
|
int sc_flags;
|
|
#define FD_OPEN 0x01 /* it's open */
|
|
#define FD_MOTOR 0x02 /* motor should be on */
|
|
#define FD_MOTOR_WAIT 0x04 /* motor coming up */
|
|
#define FD_HAVELAB 0x08 /* got a disklabel */
|
|
int sc_cylin; /* where we think the head is */
|
|
|
|
void *sc_sdhook; /* saved shutdown hook for drive. */
|
|
|
|
TAILQ_ENTRY(fd_softc) sc_drivechain;
|
|
int sc_ops; /* I/O ops since last switch */
|
|
struct buf_queue sc_q; /* pending I/O requests */
|
|
int sc_active; /* number of active I/O operations */
|
|
};
|
|
|
|
/* floppy driver configuration */
|
|
int fdprobe __P((struct device *, struct cfdata *, void *));
|
|
void fdattach __P((struct device *, struct device *, void *));
|
|
|
|
struct cfattach hdfd_ca = {
|
|
sizeof(struct fd_softc), fdprobe, fdattach
|
|
};
|
|
|
|
extern struct cfdriver hdfd_cd;
|
|
|
|
void fdstrategy __P((struct buf *));
|
|
void fdstart __P((struct fd_softc *));
|
|
|
|
struct dkdriver fddkdriver = { fdstrategy };
|
|
|
|
void fd_set_motor __P((struct fdc_softc *fdc, int reset));
|
|
void fd_motor_off __P((void *arg));
|
|
void fd_motor_on __P((void *arg));
|
|
int fdcresult __P((struct fdc_softc *fdc));
|
|
int out_fdc __P((u_char x));
|
|
void fdc_ctrl_intr __P((struct clockframe));
|
|
void fdcstart __P((struct fdc_softc *fdc));
|
|
void fdcstatus __P((struct device *dv, int n, char *s));
|
|
void fdctimeout __P((void *arg));
|
|
void fdcpseudointr __P((void *arg));
|
|
int fdcintr __P((void *));
|
|
void fdcretry __P((struct fdc_softc *fdc));
|
|
void fdfinish __P((struct fd_softc *fd, struct buf *bp));
|
|
int fdformat __P((dev_t, struct ne7_fd_formb *, struct proc *));
|
|
|
|
static void fdgetdisklabel __P((struct fd_softc *, dev_t));
|
|
static void fdgetdefaultlabel __P((struct fd_softc *, struct disklabel *,
|
|
int));
|
|
|
|
__inline struct fd_type *fd_dev_to_type __P((struct fd_softc *, dev_t));
|
|
|
|
int
|
|
fdcprobe(parent, cfp, aux)
|
|
struct device *parent;
|
|
struct cfdata *cfp;
|
|
void *aux;
|
|
{
|
|
static int fdc_matched = 0;
|
|
bus_space_tag_t mb_tag;
|
|
|
|
/* Match only once */
|
|
if(strcmp("fdc", aux) || fdc_matched)
|
|
return(0);
|
|
|
|
if (!atari_realconfig)
|
|
return 0;
|
|
|
|
if ((mb_tag = mb_alloc_bus_space_tag()) == NULL)
|
|
return 0;
|
|
|
|
if (bus_space_map(mb_tag, FD_IOBASE, FD_IOSIZE, 0,
|
|
(caddr_t*)&fdio_addr)) {
|
|
printf("fdcprobe: cannot map io-area\n");
|
|
mb_free_bus_space_tag(mb_tag);
|
|
return (0);
|
|
}
|
|
|
|
#ifdef FD_DEBUG
|
|
printf("fdcprobe: I/O mapping done va: %p\n", fdio_addr);
|
|
#endif
|
|
|
|
/* reset */
|
|
wrt_fdc_reg(fdout, 0);
|
|
delay(100);
|
|
wrt_fdc_reg(fdout, FDO_FRST);
|
|
|
|
/* see if it can handle a command */
|
|
if (out_fdc(NE7CMD_SPECIFY) < 0)
|
|
goto out;
|
|
out_fdc(0xdf);
|
|
out_fdc(7);
|
|
|
|
fdc_matched = 1;
|
|
|
|
out:
|
|
if (fdc_matched == 0) {
|
|
bus_space_unmap(mb_tag, (caddr_t)fdio_addr, FD_IOSIZE);
|
|
mb_free_bus_space_tag(mb_tag);
|
|
}
|
|
|
|
return fdc_matched;
|
|
}
|
|
|
|
/*
|
|
* Arguments passed between fdcattach and fdprobe.
|
|
*/
|
|
struct fdc_attach_args {
|
|
int fa_drive;
|
|
struct fd_type *fa_deftype;
|
|
};
|
|
|
|
/*
|
|
* Print the location of a disk drive (called just before attaching the
|
|
* the drive). If `fdc' is not NULL, the drive was found but was not
|
|
* in the system config file; print the drive name as well.
|
|
* Return QUIET (config_find ignores this if the device was configured) to
|
|
* avoid printing `fdN not configured' messages.
|
|
*/
|
|
int
|
|
fdprint(aux, fdc)
|
|
void *aux;
|
|
const char *fdc;
|
|
{
|
|
register struct fdc_attach_args *fa = aux;
|
|
|
|
if (!fdc)
|
|
printf(" drive %d", fa->fa_drive);
|
|
return QUIET;
|
|
}
|
|
|
|
void
|
|
fdcattach(parent, self, aux)
|
|
struct device *parent, *self;
|
|
void *aux;
|
|
{
|
|
struct fdc_softc *fdc = (void *)self;
|
|
struct fdc_attach_args fa;
|
|
int has_fifo;
|
|
|
|
has_fifo = 0;
|
|
|
|
fdc->sc_state = DEVIDLE;
|
|
TAILQ_INIT(&fdc->sc_drives);
|
|
|
|
out_fdc(NE7CMD_CONFIGURE);
|
|
if (out_fdc(0) == 0) {
|
|
out_fdc(0x1a); /* No polling, fifo depth = 10 */
|
|
out_fdc(0);
|
|
|
|
/* Retain configuration across resets */
|
|
out_fdc(NE7CMD_LOCK);
|
|
(void)fdcresult(fdc);
|
|
has_fifo = 1;
|
|
}
|
|
else {
|
|
(void)rd_fdc_reg(fddata);
|
|
printf(": no fifo");
|
|
}
|
|
|
|
printf("\n");
|
|
|
|
callout_init(&fdc->sc_timo_ch);
|
|
callout_init(&fdc->sc_intr_ch);
|
|
|
|
if (intr_establish(22, USER_VEC|FAST_VEC, 0,
|
|
(hw_ifun_t)(has_fifo ? mfp_hdfd_fifo : mfp_hdfd_nf),
|
|
NULL) == NULL) {
|
|
printf("fdcattach: Can't establish interrupt\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Setup the interrupt logic.
|
|
*/
|
|
MFP2->mf_iprb = (u_int8_t)~IB_DCHG;
|
|
MFP2->mf_imrb |= IB_DCHG;
|
|
MFP2->mf_aer |= 0x10; /* fdc int low->high */
|
|
|
|
/* physical limit: four drives per controller. */
|
|
for (fa.fa_drive = 0; fa.fa_drive < 4; fa.fa_drive++) {
|
|
/*
|
|
* XXX: Choose something sensible as a default...
|
|
*/
|
|
fa.fa_deftype = &fd_types[2]; /* 1.44MB */
|
|
(void)config_found(self, (void *)&fa, fdprint);
|
|
}
|
|
}
|
|
|
|
int
|
|
fdprobe(parent, cfp, aux)
|
|
struct device *parent;
|
|
struct cfdata *cfp;
|
|
void *aux;
|
|
{
|
|
struct fdc_softc *fdc = (void *)parent;
|
|
struct fdc_attach_args *fa = aux;
|
|
int drive = fa->fa_drive;
|
|
int n;
|
|
|
|
if (cfp->cf_loc[FDCCF_UNIT] != FDCCF_UNIT_DEFAULT &&
|
|
cfp->cf_loc[FDCCF_UNIT] != drive)
|
|
return 0;
|
|
/*
|
|
* XXX
|
|
* This is to work around some odd interactions between this driver
|
|
* and SMC Ethernet cards.
|
|
*/
|
|
if (cfp->cf_loc[FDCCF_UNIT] == FDCCF_UNIT_DEFAULT && drive >= 2)
|
|
return 0;
|
|
|
|
/* select drive and turn on motor */
|
|
wrt_fdc_reg(fdout, drive | FDO_FRST | FDO_MOEN(drive));
|
|
|
|
/* wait for motor to spin up */
|
|
delay(250000);
|
|
out_fdc(NE7CMD_RECAL);
|
|
out_fdc(drive);
|
|
|
|
/* wait for recalibrate */
|
|
delay(2000000);
|
|
out_fdc(NE7CMD_SENSEI);
|
|
n = fdcresult(fdc);
|
|
|
|
#ifdef FD_DEBUG
|
|
{
|
|
int i;
|
|
printf("fdprobe: status");
|
|
for (i = 0; i < n; i++)
|
|
printf(" %x", fdc->sc_status[i]);
|
|
printf("\n");
|
|
}
|
|
#endif
|
|
intr_arg = (void*)fdc;
|
|
if (n != 2 || (fdc->sc_status[0] & 0xf8) != 0x20)
|
|
return 0;
|
|
/* turn off motor */
|
|
wrt_fdc_reg(fdout, FDO_FRST);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Controller is working, and drive responded. Attach it.
|
|
*/
|
|
void
|
|
fdattach(parent, self, aux)
|
|
struct device *parent, *self;
|
|
void *aux;
|
|
{
|
|
struct fdc_softc *fdc = (void *)parent;
|
|
struct fd_softc *fd = (void *)self;
|
|
struct fdc_attach_args *fa = aux;
|
|
struct fd_type *type = fa->fa_deftype;
|
|
int drive = fa->fa_drive;
|
|
|
|
callout_init(&fd->sc_motoron_ch);
|
|
callout_init(&fd->sc_motoroff_ch);
|
|
|
|
/* XXX Allow `flags' to override device type? */
|
|
|
|
if (type)
|
|
printf(": %s %d cyl, %d head, %d sec\n", type->name,
|
|
type->tracks, type->heads, type->sectrac);
|
|
else
|
|
printf(": density unknown\n");
|
|
|
|
BUFQ_INIT(&fd->sc_q);
|
|
fd->sc_cylin = -1;
|
|
fd->sc_drive = drive;
|
|
fd->sc_deftype = type;
|
|
fdc->sc_fd[drive] = fd;
|
|
|
|
/*
|
|
* Initialize and attach the disk structure.
|
|
*/
|
|
fd->sc_dk.dk_name = fd->sc_dev.dv_xname;
|
|
fd->sc_dk.dk_driver = &fddkdriver;
|
|
disk_attach(&fd->sc_dk);
|
|
|
|
/* Needed to power off if the motor is on when we halt. */
|
|
fd->sc_sdhook = shutdownhook_establish(fd_motor_off, fd);
|
|
}
|
|
|
|
/*
|
|
* This is called from the assembly part of the interrupt handler
|
|
* when it is clear that the interrupt was not related to shoving
|
|
* data.
|
|
*/
|
|
void
|
|
fdc_ctrl_intr(frame)
|
|
struct clockframe frame;
|
|
{
|
|
int s;
|
|
|
|
/*
|
|
* Disable further interrupts. The fdcintr() routine
|
|
* explicitely enables them when needed.
|
|
*/
|
|
MFP2->mf_ierb &= ~IB_DCHG;
|
|
|
|
/*
|
|
* Set fddmalen to zero so no pseudo-dma transfers will
|
|
* occur.
|
|
*/
|
|
fddmalen = 0;
|
|
|
|
if (!BASEPRI(frame.cf_sr)) {
|
|
/*
|
|
* We don't want to stay on ipl6.....
|
|
*/
|
|
add_sicallback((si_farg)fdcpseudointr, intr_arg, 0);
|
|
}
|
|
else {
|
|
s = splbio();
|
|
(void) fdcintr(intr_arg);
|
|
splx(s);
|
|
}
|
|
}
|
|
|
|
__inline struct fd_type *
|
|
fd_dev_to_type(fd, dev)
|
|
struct fd_softc *fd;
|
|
dev_t dev;
|
|
{
|
|
int type = FDTYPE(dev);
|
|
|
|
if (type > (sizeof(fd_types) / sizeof(fd_types[0])))
|
|
return NULL;
|
|
return type ? &fd_types[type - 1] : fd->sc_deftype;
|
|
}
|
|
|
|
void
|
|
fdstrategy(bp)
|
|
register struct buf *bp; /* IO operation to perform */
|
|
{
|
|
struct fd_softc *fd = hdfd_cd.cd_devs[FDUNIT(bp->b_dev)];
|
|
int sz;
|
|
int s;
|
|
|
|
/* Valid unit, controller, and request? */
|
|
if (bp->b_blkno < 0 ||
|
|
((bp->b_bcount % FDC_BSIZE) != 0 &&
|
|
(bp->b_flags & B_FORMAT) == 0)) {
|
|
bp->b_error = EINVAL;
|
|
goto bad;
|
|
}
|
|
|
|
/* If it's a null transfer, return immediately. */
|
|
if (bp->b_bcount == 0)
|
|
goto done;
|
|
|
|
sz = howmany(bp->b_bcount, FDC_BSIZE);
|
|
|
|
if (bp->b_blkno + sz > fd->sc_type->size) {
|
|
sz = fd->sc_type->size - bp->b_blkno;
|
|
if (sz == 0) {
|
|
/* If exactly at end of disk, return EOF. */
|
|
goto done;
|
|
}
|
|
if (sz < 0) {
|
|
/* If past end of disk, return EINVAL. */
|
|
bp->b_error = EINVAL;
|
|
goto bad;
|
|
}
|
|
/* Otherwise, truncate request. */
|
|
bp->b_bcount = sz << DEV_BSHIFT;
|
|
}
|
|
|
|
bp->b_rawblkno = bp->b_blkno;
|
|
bp->b_cylinder = bp->b_blkno / (FDC_BSIZE/DEV_BSIZE) / fd->sc_type->seccyl;
|
|
|
|
#ifdef FD_DEBUG
|
|
printf("fdstrategy: b_blkno %d b_bcount %ld blkno %ld cylin %ld sz"
|
|
" %d\n", bp->b_blkno, bp->b_bcount, (long)fd->sc_blkno,
|
|
bp->b_cylinder, sz);
|
|
#endif
|
|
|
|
/* Queue transfer on drive, activate drive and controller if idle. */
|
|
s = splbio();
|
|
disksort_cylinder(&fd->sc_q, bp);
|
|
callout_stop(&fd->sc_motoroff_ch); /* a good idea */
|
|
if (fd->sc_active == 0)
|
|
fdstart(fd);
|
|
#ifdef DIAGNOSTIC
|
|
else {
|
|
struct fdc_softc *fdc = (void *)fd->sc_dev.dv_parent;
|
|
if (fdc->sc_state == DEVIDLE) {
|
|
printf("fdstrategy: controller inactive\n");
|
|
fdcstart(fdc);
|
|
}
|
|
}
|
|
#endif
|
|
splx(s);
|
|
return;
|
|
|
|
bad:
|
|
bp->b_flags |= B_ERROR;
|
|
done:
|
|
/* Toss transfer; we're done early. */
|
|
bp->b_resid = bp->b_bcount;
|
|
biodone(bp);
|
|
}
|
|
|
|
void
|
|
fdstart(fd)
|
|
struct fd_softc *fd;
|
|
{
|
|
struct fdc_softc *fdc = (void *)fd->sc_dev.dv_parent;
|
|
int active = fdc->sc_drives.tqh_first != 0;
|
|
|
|
/* Link into controller queue. */
|
|
fd->sc_active = 1;
|
|
TAILQ_INSERT_TAIL(&fdc->sc_drives, fd, sc_drivechain);
|
|
|
|
/* If controller not already active, start it. */
|
|
if (!active)
|
|
fdcstart(fdc);
|
|
}
|
|
|
|
void
|
|
fdfinish(fd, bp)
|
|
struct fd_softc *fd;
|
|
struct buf *bp;
|
|
{
|
|
struct fdc_softc *fdc = (void *)fd->sc_dev.dv_parent;
|
|
|
|
/*
|
|
* Move this drive to the end of the queue to give others a `fair'
|
|
* chance. We only force a switch if N operations are completed while
|
|
* another drive is waiting to be serviced, since there is a long motor
|
|
* startup delay whenever we switch.
|
|
*/
|
|
if (fd->sc_drivechain.tqe_next && ++fd->sc_ops >= 8) {
|
|
fd->sc_ops = 0;
|
|
TAILQ_REMOVE(&fdc->sc_drives, fd, sc_drivechain);
|
|
if (BUFQ_NEXT(bp) != NULL)
|
|
TAILQ_INSERT_TAIL(&fdc->sc_drives, fd, sc_drivechain);
|
|
else
|
|
fd->sc_active = 0;
|
|
}
|
|
bp->b_resid = fd->sc_bcount;
|
|
fd->sc_skip = 0;
|
|
BUFQ_REMOVE(&fd->sc_q, bp);
|
|
|
|
biodone(bp);
|
|
/* turn off motor 5s from now */
|
|
callout_reset(&fd->sc_motoroff_ch, 5 * hz, fd_motor_off, fd);
|
|
fdc->sc_state = DEVIDLE;
|
|
}
|
|
|
|
int
|
|
fdread(dev, uio, flags)
|
|
dev_t dev;
|
|
struct uio *uio;
|
|
int flags;
|
|
{
|
|
return (physio(fdstrategy, NULL, dev, B_READ, minphys, uio));
|
|
}
|
|
|
|
int
|
|
fdwrite(dev, uio, flags)
|
|
dev_t dev;
|
|
struct uio *uio;
|
|
int flags;
|
|
{
|
|
return (physio(fdstrategy, NULL, dev, B_WRITE, minphys, uio));
|
|
}
|
|
|
|
void
|
|
fd_set_motor(fdc, reset)
|
|
struct fdc_softc *fdc;
|
|
int reset;
|
|
{
|
|
struct fd_softc *fd;
|
|
u_char status;
|
|
int n;
|
|
|
|
if ((fd = fdc->sc_drives.tqh_first) != NULL)
|
|
status = fd->sc_drive;
|
|
else
|
|
status = 0;
|
|
if (!reset)
|
|
status |= FDO_FRST | FDO_FDMAEN;
|
|
for (n = 0; n < 4; n++)
|
|
if ((fd = fdc->sc_fd[n]) && (fd->sc_flags & FD_MOTOR))
|
|
status |= FDO_MOEN(n);
|
|
wrt_fdc_reg(fdout, status);
|
|
}
|
|
|
|
void
|
|
fd_motor_off(arg)
|
|
void *arg;
|
|
{
|
|
struct fd_softc *fd = arg;
|
|
int s;
|
|
|
|
s = splbio();
|
|
fd->sc_flags &= ~(FD_MOTOR | FD_MOTOR_WAIT);
|
|
fd_set_motor((struct fdc_softc *)fd->sc_dev.dv_parent, 0);
|
|
splx(s);
|
|
}
|
|
|
|
void
|
|
fd_motor_on(arg)
|
|
void *arg;
|
|
{
|
|
struct fd_softc *fd = arg;
|
|
struct fdc_softc *fdc = (void *)fd->sc_dev.dv_parent;
|
|
int s;
|
|
|
|
s = splbio();
|
|
fd->sc_flags &= ~FD_MOTOR_WAIT;
|
|
if ((fdc->sc_drives.tqh_first == fd) && (fdc->sc_state == MOTORWAIT))
|
|
(void) fdcintr(fdc);
|
|
splx(s);
|
|
}
|
|
|
|
int
|
|
fdcresult(fdc)
|
|
struct fdc_softc *fdc;
|
|
{
|
|
u_char i;
|
|
int j = 100000,
|
|
n = 0;
|
|
|
|
for (; j; j--) {
|
|
i = rd_fdc_reg(fdsts) & (NE7_DIO | NE7_RQM | NE7_CB);
|
|
if (i == NE7_RQM)
|
|
return n;
|
|
if (i == (NE7_DIO | NE7_RQM | NE7_CB)) {
|
|
if (n >= sizeof(fdc->sc_status)) {
|
|
log(LOG_ERR, "fdcresult: overrun\n");
|
|
return -1;
|
|
}
|
|
fdc->sc_status[n++] = rd_fdc_reg(fddata);
|
|
}
|
|
else delay(10);
|
|
}
|
|
log(LOG_ERR, "fdcresult: timeout\n");
|
|
return -1;
|
|
}
|
|
|
|
int
|
|
out_fdc(x)
|
|
u_char x;
|
|
{
|
|
int i = 100000;
|
|
|
|
while (((rd_fdc_reg(fdsts) & (NE7_DIO|NE7_RQM)) != NE7_RQM) && i-- > 0)
|
|
delay(1);
|
|
if (i <= 0)
|
|
return -1;
|
|
wrt_fdc_reg(fddata, x);
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
fdopen(dev, flags, mode, p)
|
|
dev_t dev;
|
|
int flags;
|
|
int mode;
|
|
struct proc *p;
|
|
{
|
|
int unit;
|
|
struct fd_softc *fd;
|
|
struct fd_type *type;
|
|
|
|
unit = FDUNIT(dev);
|
|
if (unit >= hdfd_cd.cd_ndevs)
|
|
return ENXIO;
|
|
fd = hdfd_cd.cd_devs[unit];
|
|
if (fd == 0)
|
|
return ENXIO;
|
|
type = fd_dev_to_type(fd, dev);
|
|
if (type == NULL)
|
|
return ENXIO;
|
|
|
|
if ((fd->sc_flags & FD_OPEN) != 0 &&
|
|
fd->sc_type != type)
|
|
return EBUSY;
|
|
|
|
fd->sc_type = type;
|
|
fd->sc_cylin = -1;
|
|
fd->sc_flags |= FD_OPEN;
|
|
fdgetdisklabel(fd, dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
fdclose(dev, flags, mode, p)
|
|
dev_t dev;
|
|
int flags;
|
|
int mode;
|
|
struct proc *p;
|
|
{
|
|
struct fd_softc *fd = hdfd_cd.cd_devs[FDUNIT(dev)];
|
|
|
|
fd->sc_flags &= ~(FD_OPEN|FD_HAVELAB);
|
|
fd->sc_opts &= ~(FDOPT_NORETRY|FDOPT_SILENT);
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
fdcstart(fdc)
|
|
struct fdc_softc *fdc;
|
|
{
|
|
|
|
#ifdef DIAGNOSTIC
|
|
/* only got here if controller's drive queue was inactive; should
|
|
be in idle state */
|
|
if (fdc->sc_state != DEVIDLE) {
|
|
printf("fdcstart: not idle\n");
|
|
return;
|
|
}
|
|
#endif
|
|
(void) fdcintr(fdc);
|
|
}
|
|
|
|
void
|
|
fdcstatus(dv, n, s)
|
|
struct device *dv;
|
|
int n;
|
|
char *s;
|
|
{
|
|
struct fdc_softc *fdc = (void *)dv->dv_parent;
|
|
char bits[64];
|
|
|
|
if (n == 0) {
|
|
out_fdc(NE7CMD_SENSEI);
|
|
(void) fdcresult(fdc);
|
|
n = 2;
|
|
}
|
|
|
|
printf("%s: %s", dv->dv_xname, s);
|
|
|
|
switch (n) {
|
|
case 0:
|
|
printf("\n");
|
|
break;
|
|
case 2:
|
|
printf(" (st0 %s cyl %d)\n",
|
|
bitmask_snprintf(fdc->sc_status[0], NE7_ST0BITS,
|
|
bits, sizeof(bits)), fdc->sc_status[1]);
|
|
break;
|
|
case 7:
|
|
printf(" (st0 %s", bitmask_snprintf(fdc->sc_status[0],
|
|
NE7_ST0BITS, bits, sizeof(bits)));
|
|
printf(" st1 %s", bitmask_snprintf(fdc->sc_status[1],
|
|
NE7_ST1BITS, bits, sizeof(bits)));
|
|
printf(" st2 %s", bitmask_snprintf(fdc->sc_status[2],
|
|
NE7_ST2BITS, bits, sizeof(bits)));
|
|
printf(" cyl %d head %d sec %d)\n",
|
|
fdc->sc_status[3], fdc->sc_status[4], fdc->sc_status[5]);
|
|
break;
|
|
#ifdef DIAGNOSTIC
|
|
default:
|
|
printf("\nfdcstatus: weird size");
|
|
break;
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void
|
|
fdctimeout(arg)
|
|
void *arg;
|
|
{
|
|
struct fdc_softc *fdc = arg;
|
|
struct fd_softc *fd = fdc->sc_drives.tqh_first;
|
|
int s;
|
|
|
|
s = splbio();
|
|
fdcstatus(&fd->sc_dev, 0, "timeout");
|
|
|
|
if (BUFQ_FIRST(&fd->sc_q) != NULL)
|
|
fdc->sc_state++;
|
|
else
|
|
fdc->sc_state = DEVIDLE;
|
|
|
|
(void) fdcintr(fdc);
|
|
splx(s);
|
|
}
|
|
|
|
void
|
|
fdcpseudointr(arg)
|
|
void *arg;
|
|
{
|
|
int s;
|
|
|
|
/* Just ensure it has the right spl. */
|
|
s = splbio();
|
|
(void) fdcintr(arg);
|
|
splx(s);
|
|
}
|
|
|
|
int
|
|
fdcintr(arg)
|
|
void *arg;
|
|
{
|
|
struct fdc_softc *fdc = arg;
|
|
#define st0 fdc->sc_status[0]
|
|
#define st1 fdc->sc_status[1]
|
|
#define cyl fdc->sc_status[1]
|
|
|
|
struct fd_softc *fd;
|
|
struct buf *bp;
|
|
int read, head, sec, i, nblks;
|
|
struct fd_type *type;
|
|
struct ne7_fd_formb *finfo = NULL;
|
|
|
|
loop:
|
|
/* Is there a drive for the controller to do a transfer with? */
|
|
fd = fdc->sc_drives.tqh_first;
|
|
if (fd == NULL) {
|
|
fdc->sc_state = DEVIDLE;
|
|
return 1;
|
|
}
|
|
|
|
/* Is there a transfer to this drive? If not, deactivate drive. */
|
|
bp = BUFQ_FIRST(&fd->sc_q);
|
|
if (bp == NULL) {
|
|
fd->sc_ops = 0;
|
|
TAILQ_REMOVE(&fdc->sc_drives, fd, sc_drivechain);
|
|
fd->sc_active = 0;
|
|
goto loop;
|
|
}
|
|
|
|
if (bp->b_flags & B_FORMAT)
|
|
finfo = (struct ne7_fd_formb *)bp->b_data;
|
|
|
|
switch (fdc->sc_state) {
|
|
case DEVIDLE:
|
|
fdc->sc_errors = 0;
|
|
fdc->sc_overruns = 0;
|
|
fd->sc_skip = 0;
|
|
fd->sc_bcount = bp->b_bcount;
|
|
fd->sc_blkno = bp->b_blkno / (FDC_BSIZE / DEV_BSIZE);
|
|
callout_stop(&fd->sc_motoroff_ch);
|
|
if ((fd->sc_flags & FD_MOTOR_WAIT) != 0) {
|
|
fdc->sc_state = MOTORWAIT;
|
|
return 1;
|
|
}
|
|
if ((fd->sc_flags & FD_MOTOR) == 0) {
|
|
/* Turn on the motor, being careful about pairing. */
|
|
struct fd_softc *ofd = fdc->sc_fd[fd->sc_drive ^ 1];
|
|
if (ofd && ofd->sc_flags & FD_MOTOR) {
|
|
callout_stop(&ofd->sc_motoroff_ch);
|
|
ofd->sc_flags &= ~(FD_MOTOR | FD_MOTOR_WAIT);
|
|
}
|
|
fd->sc_flags |= FD_MOTOR | FD_MOTOR_WAIT;
|
|
fd_set_motor(fdc, 0);
|
|
fdc->sc_state = MOTORWAIT;
|
|
/* Allow .25s for motor to stabilize. */
|
|
callout_reset(&fd->sc_motoron_ch, hz / 4,
|
|
fd_motor_on, fd);
|
|
return 1;
|
|
}
|
|
/* Make sure the right drive is selected. */
|
|
fd_set_motor(fdc, 0);
|
|
|
|
/* fall through */
|
|
case DOSEEK:
|
|
doseek:
|
|
if (fd->sc_cylin == bp->b_cylinder)
|
|
goto doio;
|
|
|
|
out_fdc(NE7CMD_SPECIFY);/* specify command */
|
|
out_fdc(fd->sc_type->steprate);
|
|
out_fdc(0x7); /* XXX head load time == 6ms - non-dma */
|
|
|
|
fdc_ienable();
|
|
|
|
out_fdc(NE7CMD_SEEK); /* seek function */
|
|
out_fdc(fd->sc_drive); /* drive number */
|
|
out_fdc(bp->b_cylinder * fd->sc_type->step);
|
|
|
|
fd->sc_cylin = -1;
|
|
fdc->sc_state = SEEKWAIT;
|
|
|
|
fd->sc_dk.dk_seek++;
|
|
disk_busy(&fd->sc_dk);
|
|
|
|
callout_reset(&fdc->sc_timo_ch, 4 * hz, fdctimeout, fdc);
|
|
return 1;
|
|
|
|
case DOIO:
|
|
doio:
|
|
if (finfo)
|
|
fd->sc_skip = (char *)&(finfo->fd_formb_cylno(0)) -
|
|
(char *)finfo;
|
|
|
|
type = fd->sc_type;
|
|
sec = fd->sc_blkno % type->seccyl;
|
|
head = sec / type->sectrac;
|
|
sec -= head * type->sectrac;
|
|
nblks = type->sectrac - sec;
|
|
nblks = min(nblks, fd->sc_bcount / FDC_BSIZE);
|
|
nblks = min(nblks, FDC_MAXIOSIZE / FDC_BSIZE);
|
|
fd->sc_nblks = nblks;
|
|
fd->sc_nbytes = finfo ? bp->b_bcount : nblks * FDC_BSIZE;
|
|
#ifdef DIAGNOSTIC
|
|
{
|
|
int block;
|
|
|
|
block = (fd->sc_cylin * type->heads + head)
|
|
* type->sectrac + sec;
|
|
if (block != fd->sc_blkno) {
|
|
printf("fdcintr: block %d != blkno %d\n",
|
|
block, fd->sc_blkno);
|
|
#ifdef DDB
|
|
Debugger();
|
|
#endif
|
|
}
|
|
}
|
|
#endif
|
|
read = bp->b_flags & B_READ ? 1 : 0;
|
|
|
|
/*
|
|
* Setup pseudo-dma address & count
|
|
*/
|
|
fddmaaddr = bp->b_data + fd->sc_skip;
|
|
fddmalen = fd->sc_nbytes;
|
|
|
|
wrt_fdc_reg(fdctl, type->rate);
|
|
#ifdef FD_DEBUG
|
|
printf("fdcintr: %s drive %d track %d head %d sec %d"
|
|
" nblks %d\n", read ? "read" : "write",
|
|
fd->sc_drive, fd->sc_cylin, head, sec, nblks);
|
|
#endif
|
|
fdc_ienable();
|
|
|
|
if (finfo) {
|
|
/* formatting */
|
|
if (out_fdc(NE7CMD_FORMAT) < 0) {
|
|
fdc->sc_errors = 4;
|
|
fdcretry(fdc);
|
|
goto loop;
|
|
}
|
|
out_fdc((head << 2) | fd->sc_drive);
|
|
out_fdc(finfo->fd_formb_secshift);
|
|
out_fdc(finfo->fd_formb_nsecs);
|
|
out_fdc(finfo->fd_formb_gaplen);
|
|
out_fdc(finfo->fd_formb_fillbyte);
|
|
} else {
|
|
if (read)
|
|
out_fdc(NE7CMD_READ); /* READ */
|
|
else
|
|
out_fdc(NE7CMD_WRITE); /* WRITE */
|
|
out_fdc((head << 2) | fd->sc_drive);
|
|
out_fdc(fd->sc_cylin); /* track */
|
|
out_fdc(head); /* head */
|
|
out_fdc(sec + 1); /* sector +1 */
|
|
out_fdc(type->secsize); /* sector size */
|
|
out_fdc(sec + nblks); /* last sectors */
|
|
out_fdc(type->gap1); /* gap1 size */
|
|
out_fdc(type->datalen); /* data length */
|
|
}
|
|
fdc->sc_state = IOCOMPLETE;
|
|
|
|
disk_busy(&fd->sc_dk);
|
|
|
|
/* allow 2 seconds for operation */
|
|
callout_reset(&fdc->sc_timo_ch, 2 * hz, fdctimeout, fdc);
|
|
return 1; /* will return later */
|
|
|
|
case SEEKWAIT:
|
|
callout_stop(&fdc->sc_timo_ch);
|
|
fdc->sc_state = SEEKCOMPLETE;
|
|
/* allow 1/50 second for heads to settle */
|
|
callout_reset(&fdc->sc_intr_ch, hz / 50, fdcpseudointr, fdc);
|
|
return 1;
|
|
|
|
case SEEKCOMPLETE:
|
|
disk_unbusy(&fd->sc_dk, 0); /* no data on seek */
|
|
|
|
/* Make sure seek really happened. */
|
|
out_fdc(NE7CMD_SENSEI);
|
|
if (fdcresult(fdc) != 2 || (st0 & 0xf8) != 0x20 ||
|
|
cyl != bp->b_cylinder * fd->sc_type->step) {
|
|
#ifdef FD_DEBUG
|
|
fdcstatus(&fd->sc_dev, 2, "seek failed");
|
|
#endif
|
|
fdcretry(fdc);
|
|
goto loop;
|
|
}
|
|
fd->sc_cylin = bp->b_cylinder;
|
|
goto doio;
|
|
|
|
case IOTIMEDOUT:
|
|
case SEEKTIMEDOUT:
|
|
case RECALTIMEDOUT:
|
|
case RESETTIMEDOUT:
|
|
fdcretry(fdc);
|
|
goto loop;
|
|
|
|
case IOCOMPLETE: /* IO DONE, post-analyze */
|
|
callout_stop(&fdc->sc_timo_ch);
|
|
|
|
disk_unbusy(&fd->sc_dk, (bp->b_bcount - bp->b_resid));
|
|
|
|
if (fdcresult(fdc) != 7 || (st1 & 0x37) != 0) {
|
|
/*
|
|
* As the damn chip doesn't seem to have a FIFO,
|
|
* accept a few overruns as a fact of life *sigh*
|
|
*/
|
|
if ((st1 & 0x10) && (++fdc->sc_overruns < 4)) {
|
|
fdc->sc_state = DOSEEK;
|
|
goto loop;
|
|
}
|
|
#ifdef FD_DEBUG
|
|
fdcstatus(&fd->sc_dev, 7, bp->b_flags & B_READ ?
|
|
"read failed" : "write failed");
|
|
printf("blkno %d nblks %d\n",
|
|
fd->sc_blkno, fd->sc_nblks);
|
|
#endif
|
|
fdcretry(fdc);
|
|
goto loop;
|
|
}
|
|
if (fdc->sc_errors) {
|
|
diskerr(bp, "fd", "soft error", LOG_PRINTF,
|
|
fd->sc_skip / FDC_BSIZE, (struct disklabel *)NULL);
|
|
printf("\n");
|
|
fdc->sc_errors = 0;
|
|
}
|
|
fdc->sc_overruns = 0;
|
|
fd->sc_blkno += fd->sc_nblks;
|
|
fd->sc_skip += fd->sc_nbytes;
|
|
fd->sc_bcount -= fd->sc_nbytes;
|
|
if (!finfo && fd->sc_bcount > 0) {
|
|
bp->b_cylinder = fd->sc_blkno / fd->sc_type->seccyl;
|
|
goto doseek;
|
|
}
|
|
fdfinish(fd, bp);
|
|
goto loop;
|
|
|
|
case DORESET:
|
|
/* try a reset, keep motor on */
|
|
fd_set_motor(fdc, 1);
|
|
delay(100);
|
|
fd_set_motor(fdc, 0);
|
|
fdc->sc_state = RESETCOMPLETE;
|
|
callout_reset(&fdc->sc_timo_ch, hz / 2, fdctimeout, fdc);
|
|
return 1; /* will return later */
|
|
|
|
case RESETCOMPLETE:
|
|
callout_stop(&fdc->sc_timo_ch);
|
|
/* clear the controller output buffer */
|
|
for (i = 0; i < 4; i++) {
|
|
out_fdc(NE7CMD_SENSEI);
|
|
(void) fdcresult(fdc);
|
|
}
|
|
|
|
/* fall through */
|
|
case DORECAL:
|
|
fdc_ienable();
|
|
|
|
out_fdc(NE7CMD_RECAL); /* recalibrate function */
|
|
out_fdc(fd->sc_drive);
|
|
fdc->sc_state = RECALWAIT;
|
|
callout_reset(&fdc->sc_timo_ch, 5 * hz, fdctimeout, fdc);
|
|
return 1; /* will return later */
|
|
|
|
case RECALWAIT:
|
|
callout_stop(&fdc->sc_timo_ch);
|
|
fdc->sc_state = RECALCOMPLETE;
|
|
/* allow 1/30 second for heads to settle */
|
|
callout_reset(&fdc->sc_intr_ch, hz / 30, fdcpseudointr, fdc);
|
|
return 1; /* will return later */
|
|
|
|
case RECALCOMPLETE:
|
|
out_fdc(NE7CMD_SENSEI);
|
|
if (fdcresult(fdc) != 2 || (st0 & 0xf8) != 0x20 || cyl != 0) {
|
|
#ifdef FD_DEBUG
|
|
fdcstatus(&fd->sc_dev, 2, "recalibrate failed");
|
|
#endif
|
|
fdcretry(fdc);
|
|
goto loop;
|
|
}
|
|
fd->sc_cylin = 0;
|
|
goto doseek;
|
|
|
|
case MOTORWAIT:
|
|
if (fd->sc_flags & FD_MOTOR_WAIT)
|
|
return 1; /* time's not up yet */
|
|
goto doseek;
|
|
|
|
default:
|
|
fdcstatus(&fd->sc_dev, 0, "stray interrupt");
|
|
return 1;
|
|
}
|
|
#ifdef DIAGNOSTIC
|
|
panic("fdcintr: impossible");
|
|
#endif
|
|
#undef st0
|
|
#undef st1
|
|
#undef cyl
|
|
}
|
|
|
|
void
|
|
fdcretry(fdc)
|
|
struct fdc_softc *fdc;
|
|
{
|
|
char bits[64];
|
|
struct fd_softc *fd;
|
|
struct buf *bp;
|
|
|
|
fd = fdc->sc_drives.tqh_first;
|
|
bp = BUFQ_FIRST(&fd->sc_q);
|
|
|
|
if (fd->sc_opts & FDOPT_NORETRY)
|
|
goto fail;
|
|
|
|
switch (fdc->sc_errors) {
|
|
case 0:
|
|
/* try again */
|
|
fdc->sc_state = DOSEEK;
|
|
break;
|
|
|
|
case 1: case 2: case 3:
|
|
/* didn't work; try recalibrating */
|
|
fdc->sc_state = DORECAL;
|
|
break;
|
|
|
|
case 4:
|
|
/* still no go; reset the bastard */
|
|
fdc->sc_state = DORESET;
|
|
break;
|
|
|
|
default:
|
|
fail:
|
|
if ((fd->sc_opts & FDOPT_SILENT) == 0) {
|
|
diskerr(bp, "fd", "hard error", LOG_PRINTF,
|
|
fd->sc_skip / FDC_BSIZE,
|
|
(struct disklabel *)NULL);
|
|
|
|
printf(" (st0 %s",
|
|
bitmask_snprintf(fdc->sc_status[0],
|
|
NE7_ST0BITS, bits,
|
|
sizeof(bits)));
|
|
printf(" st1 %s",
|
|
bitmask_snprintf(fdc->sc_status[1],
|
|
NE7_ST1BITS, bits,
|
|
sizeof(bits)));
|
|
printf(" st2 %s",
|
|
bitmask_snprintf(fdc->sc_status[2],
|
|
NE7_ST2BITS, bits,
|
|
sizeof(bits)));
|
|
printf(" cyl %d head %d sec %d)\n",
|
|
fdc->sc_status[3],
|
|
fdc->sc_status[4],
|
|
fdc->sc_status[5]);
|
|
}
|
|
bp->b_flags |= B_ERROR;
|
|
bp->b_error = EIO;
|
|
fdfinish(fd, bp);
|
|
}
|
|
fdc->sc_errors++;
|
|
}
|
|
|
|
int
|
|
fdsize(dev)
|
|
dev_t dev;
|
|
{
|
|
|
|
/* Swapping to floppies would not make sense. */
|
|
return -1;
|
|
}
|
|
|
|
int
|
|
fddump(dev, blkno, va, size)
|
|
dev_t dev;
|
|
daddr_t blkno;
|
|
caddr_t va;
|
|
size_t size;
|
|
{
|
|
|
|
/* Not implemented. */
|
|
return ENXIO;
|
|
}
|
|
|
|
int
|
|
fdioctl(dev, cmd, addr, flag, p)
|
|
dev_t dev;
|
|
u_long cmd;
|
|
caddr_t addr;
|
|
int flag;
|
|
struct proc *p;
|
|
{
|
|
struct fd_softc *fd;
|
|
struct disklabel buffer;
|
|
int error;
|
|
struct fdformat_parms *form_parms;
|
|
struct fdformat_cmd *form_cmd;
|
|
struct ne7_fd_formb *fd_formb;
|
|
unsigned int scratch;
|
|
int il[FD_MAX_NSEC + 1];
|
|
register int i, j;
|
|
|
|
fd = hdfd_cd.cd_devs[FDUNIT(dev)];
|
|
|
|
switch (cmd) {
|
|
case DIOCGDINFO:
|
|
fdgetdisklabel(fd, dev);
|
|
*(struct disklabel *)addr = *(fd->sc_dk.dk_label);
|
|
return 0;
|
|
|
|
case DIOCGPART:
|
|
fdgetdisklabel(fd, dev);
|
|
((struct partinfo *)addr)->disklab = fd->sc_dk.dk_label;
|
|
((struct partinfo *)addr)->part =
|
|
&fd->sc_dk.dk_label->d_partitions[RAW_PART];
|
|
return(0);
|
|
|
|
case DIOCWLABEL:
|
|
if ((flag & FWRITE) == 0)
|
|
return EBADF;
|
|
/* XXX do something */
|
|
return 0;
|
|
|
|
case DIOCSDINFO:
|
|
case DIOCWDINFO:
|
|
if ((flag & FWRITE) == 0)
|
|
return EBADF;
|
|
|
|
fd->sc_flags &= ~FD_HAVELAB; /* Invalid */
|
|
error = setdisklabel(&buffer, (struct disklabel *)addr, 0,NULL);
|
|
if (error)
|
|
return error;
|
|
|
|
if (cmd == DIOCWDINFO)
|
|
error = writedisklabel(dev, fdstrategy, &buffer, NULL);
|
|
return error;
|
|
|
|
case FDIOCGETFORMAT:
|
|
form_parms = (struct fdformat_parms *)addr;
|
|
form_parms->fdformat_version = FDFORMAT_VERSION;
|
|
form_parms->nbps = 128 * (1 << fd->sc_type->secsize);
|
|
form_parms->ncyl = fd->sc_type->tracks;
|
|
form_parms->nspt = fd->sc_type->sectrac;
|
|
form_parms->ntrk = fd->sc_type->heads;
|
|
form_parms->stepspercyl = fd->sc_type->step;
|
|
form_parms->gaplen = fd->sc_type->gap2;
|
|
form_parms->fillbyte = fd->sc_type->fillbyte;
|
|
form_parms->interleave = fd->sc_type->interleave;
|
|
switch (fd->sc_type->rate) {
|
|
case FDC_500KBPS:
|
|
form_parms->xfer_rate = 500 * 1024;
|
|
break;
|
|
case FDC_300KBPS:
|
|
form_parms->xfer_rate = 300 * 1024;
|
|
break;
|
|
case FDC_250KBPS:
|
|
form_parms->xfer_rate = 250 * 1024;
|
|
break;
|
|
case FDC_125KBPS:
|
|
form_parms->xfer_rate = 125 * 1024;
|
|
break;
|
|
default:
|
|
return EINVAL;
|
|
}
|
|
return 0;
|
|
|
|
case FDIOCSETFORMAT:
|
|
if((flag & FWRITE) == 0)
|
|
return EBADF; /* must be opened for writing */
|
|
form_parms = (struct fdformat_parms *)addr;
|
|
if (form_parms->fdformat_version != FDFORMAT_VERSION)
|
|
return EINVAL; /* wrong version of formatting prog */
|
|
|
|
scratch = form_parms->nbps >> 7;
|
|
if ((form_parms->nbps & 0x7f) || ffs(scratch) == 0 ||
|
|
scratch & ~(1 << (ffs(scratch)-1)))
|
|
/* not a power-of-two multiple of 128 */
|
|
return EINVAL;
|
|
|
|
switch (form_parms->xfer_rate) {
|
|
case 500 * 1024:
|
|
fd->sc_type->rate = FDC_500KBPS;
|
|
break;
|
|
case 300 * 1024:
|
|
fd->sc_type->rate = FDC_300KBPS;
|
|
break;
|
|
case 250 * 1024:
|
|
fd->sc_type->rate = FDC_250KBPS;
|
|
break;
|
|
case 125 * 1024:
|
|
fd->sc_type->rate = FDC_125KBPS;
|
|
break;
|
|
default:
|
|
return EINVAL;
|
|
}
|
|
|
|
if (form_parms->nspt > FD_MAX_NSEC ||
|
|
form_parms->fillbyte > 0xff ||
|
|
form_parms->interleave > 0xff)
|
|
return EINVAL;
|
|
fd->sc_type->sectrac = form_parms->nspt;
|
|
if (form_parms->ntrk != 2 && form_parms->ntrk != 1)
|
|
return EINVAL;
|
|
fd->sc_type->heads = form_parms->ntrk;
|
|
fd->sc_type->seccyl = form_parms->nspt * form_parms->ntrk;
|
|
fd->sc_type->secsize = ffs(scratch)-1;
|
|
fd->sc_type->gap2 = form_parms->gaplen;
|
|
fd->sc_type->tracks = form_parms->ncyl;
|
|
fd->sc_type->size = fd->sc_type->seccyl * form_parms->ncyl *
|
|
form_parms->nbps / DEV_BSIZE;
|
|
fd->sc_type->step = form_parms->stepspercyl;
|
|
fd->sc_type->fillbyte = form_parms->fillbyte;
|
|
fd->sc_type->interleave = form_parms->interleave;
|
|
return 0;
|
|
|
|
case FDIOCFORMAT_TRACK:
|
|
if((flag & FWRITE) == 0)
|
|
return EBADF; /* must be opened for writing */
|
|
form_cmd = (struct fdformat_cmd *)addr;
|
|
if (form_cmd->formatcmd_version != FDFORMAT_VERSION)
|
|
return EINVAL; /* wrong version of formatting prog */
|
|
|
|
if (form_cmd->head >= fd->sc_type->heads ||
|
|
form_cmd->cylinder >= fd->sc_type->tracks) {
|
|
return EINVAL;
|
|
}
|
|
|
|
fd_formb = malloc(sizeof(struct ne7_fd_formb),
|
|
M_TEMP, M_NOWAIT);
|
|
if (fd_formb == 0)
|
|
return ENOMEM;
|
|
|
|
fd_formb->head = form_cmd->head;
|
|
fd_formb->cyl = form_cmd->cylinder;
|
|
fd_formb->transfer_rate = fd->sc_type->rate;
|
|
fd_formb->fd_formb_secshift = fd->sc_type->secsize;
|
|
fd_formb->fd_formb_nsecs = fd->sc_type->sectrac;
|
|
fd_formb->fd_formb_gaplen = fd->sc_type->gap2;
|
|
fd_formb->fd_formb_fillbyte = fd->sc_type->fillbyte;
|
|
|
|
bzero(il,sizeof il);
|
|
for (j = 0, i = 1; i <= fd_formb->fd_formb_nsecs; i++) {
|
|
while (il[(j%fd_formb->fd_formb_nsecs)+1])
|
|
j++;
|
|
il[(j%fd_formb->fd_formb_nsecs)+1] = i;
|
|
j += fd->sc_type->interleave;
|
|
}
|
|
for (i = 0; i < fd_formb->fd_formb_nsecs; i++) {
|
|
fd_formb->fd_formb_cylno(i) = form_cmd->cylinder;
|
|
fd_formb->fd_formb_headno(i) = form_cmd->head;
|
|
fd_formb->fd_formb_secno(i) = il[i+1];
|
|
fd_formb->fd_formb_secsize(i) = fd->sc_type->secsize;
|
|
}
|
|
|
|
error = fdformat(dev, fd_formb, p);
|
|
free(fd_formb, M_TEMP);
|
|
return error;
|
|
|
|
case FDIOCGETOPTS: /* get drive options */
|
|
*(int *)addr = fd->sc_opts;
|
|
return 0;
|
|
|
|
case FDIOCSETOPTS: /* set drive options */
|
|
fd->sc_opts = *(int *)addr;
|
|
return 0;
|
|
|
|
|
|
default:
|
|
return ENOTTY;
|
|
}
|
|
|
|
#ifdef DIAGNOSTIC
|
|
panic("fdioctl: impossible");
|
|
#endif
|
|
}
|
|
|
|
int
|
|
fdformat(dev, finfo, p)
|
|
dev_t dev;
|
|
struct ne7_fd_formb *finfo;
|
|
struct proc *p;
|
|
{
|
|
int rv = 0, s;
|
|
struct fd_softc *fd = hdfd_cd.cd_devs[FDUNIT(dev)];
|
|
struct fd_type *type = fd->sc_type;
|
|
struct buf *bp;
|
|
|
|
/* set up a buffer header for fdstrategy() */
|
|
bp = (struct buf *)malloc(sizeof(struct buf), M_TEMP, M_NOWAIT);
|
|
if(bp == 0)
|
|
return ENOBUFS;
|
|
bzero((void *)bp, sizeof(struct buf));
|
|
bp->b_flags = B_BUSY | B_PHYS | B_FORMAT;
|
|
bp->b_proc = p;
|
|
bp->b_dev = dev;
|
|
|
|
/*
|
|
* calculate a fake blkno, so fdstrategy() would initiate a
|
|
* seek to the requested cylinder
|
|
*/
|
|
bp->b_blkno = (finfo->cyl * (type->sectrac * type->heads)
|
|
+ finfo->head * type->sectrac) * FDC_BSIZE / DEV_BSIZE;
|
|
|
|
bp->b_bcount = sizeof(struct fd_idfield_data) * finfo->fd_formb_nsecs;
|
|
bp->b_data = (caddr_t)finfo;
|
|
|
|
#ifdef DEBUG
|
|
printf("fdformat: blkno %x count %lx\n", bp->b_blkno, bp->b_bcount);
|
|
#endif
|
|
|
|
/* now do the format */
|
|
fdstrategy(bp);
|
|
|
|
/* ...and wait for it to complete */
|
|
s = splbio();
|
|
while(!(bp->b_flags & B_DONE)) {
|
|
rv = tsleep((caddr_t)bp, PRIBIO, "fdform", 20 * hz);
|
|
if (rv == EWOULDBLOCK)
|
|
break;
|
|
}
|
|
splx(s);
|
|
|
|
if (rv == EWOULDBLOCK) {
|
|
/* timed out */
|
|
rv = EIO;
|
|
biodone(bp);
|
|
}
|
|
if(bp->b_flags & B_ERROR) {
|
|
rv = bp->b_error;
|
|
}
|
|
free(bp, M_TEMP);
|
|
return rv;
|
|
}
|
|
|
|
|
|
/*
|
|
* Obtain a disklabel. Either a real one from the disk or, if there
|
|
* is none, a fake one.
|
|
*/
|
|
static void
|
|
fdgetdisklabel(fd, dev)
|
|
struct fd_softc *fd;
|
|
dev_t dev;
|
|
{
|
|
struct disklabel *lp;
|
|
struct cpu_disklabel cpulab;
|
|
|
|
if (fd->sc_flags & FD_HAVELAB)
|
|
return; /* Already got one */
|
|
|
|
lp = fd->sc_dk.dk_label;
|
|
|
|
bzero(lp, sizeof(*lp));
|
|
bzero(&cpulab, sizeof(cpulab));
|
|
|
|
lp->d_secpercyl = fd->sc_type->seccyl;
|
|
lp->d_type = DTYPE_FLOPPY;
|
|
lp->d_secsize = FDC_BSIZE;
|
|
lp->d_secperunit = fd->sc_type->size;
|
|
|
|
/*
|
|
* If there is no label on the disk: fake one
|
|
*/
|
|
if (readdisklabel(dev, fdstrategy, lp, &cpulab) != NULL)
|
|
fdgetdefaultlabel(fd, lp, RAW_PART);
|
|
fd->sc_flags |= FD_HAVELAB;
|
|
|
|
if ((FDC_BSIZE * fd->sc_type->size)
|
|
< (lp->d_secsize * lp->d_secperunit)) {
|
|
/*
|
|
* XXX: Ignore these fields. If you drop a vnddisk
|
|
* on more than one floppy, you'll get disturbing
|
|
* sounds!
|
|
*/
|
|
lp->d_secpercyl = fd->sc_type->seccyl;
|
|
lp->d_type = DTYPE_FLOPPY;
|
|
lp->d_secsize = FDC_BSIZE;
|
|
lp->d_secperunit = fd->sc_type->size;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Build defaultdisk label. For now we only create a label from what we
|
|
* know from 'sc'.
|
|
*/
|
|
static void
|
|
fdgetdefaultlabel(fd, lp, part)
|
|
struct fd_softc *fd;
|
|
struct disklabel *lp;
|
|
int part;
|
|
{
|
|
bzero(lp, sizeof(struct disklabel));
|
|
|
|
lp->d_secsize = 128 * (1 << fd->sc_type->secsize);
|
|
lp->d_ntracks = fd->sc_type->heads;
|
|
lp->d_nsectors = fd->sc_type->sectrac;
|
|
lp->d_secpercyl = lp->d_ntracks * lp->d_nsectors;
|
|
lp->d_ncylinders = fd->sc_type->size / lp->d_secpercyl;
|
|
lp->d_secperunit = fd->sc_type->size;
|
|
|
|
lp->d_type = DTYPE_FLOPPY;
|
|
lp->d_rpm = 300; /* good guess I suppose. */
|
|
lp->d_interleave = 1; /* FIXME: is this OK? */
|
|
lp->d_bbsize = 0;
|
|
lp->d_sbsize = 0;
|
|
lp->d_npartitions = part + 1;
|
|
lp->d_trkseek = 6000; /* Who cares... */
|
|
lp->d_magic = DISKMAGIC;
|
|
lp->d_magic2 = DISKMAGIC;
|
|
lp->d_checksum = dkcksum(lp);
|
|
lp->d_partitions[part].p_size = lp->d_secperunit;
|
|
lp->d_partitions[part].p_fstype = FS_UNUSED;
|
|
lp->d_partitions[part].p_fsize = 1024;
|
|
lp->d_partitions[part].p_frag = 8;
|
|
}
|