bdc07cff2c
No functional change intended.
894 lines
23 KiB
C
894 lines
23 KiB
C
/* $NetBSD: if_bwfm_usb.c,v 1.15 2020/07/22 17:18:10 riastradh Exp $ */
|
|
/* $OpenBSD: if_bwfm_usb.c,v 1.2 2017/10/15 14:55:13 patrick Exp $ */
|
|
/*
|
|
* Copyright (c) 2010-2016 Broadcom Corporation
|
|
* Copyright (c) 2016,2017 Patrick Wildt <patrick@blueri.se>
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: if_bwfm_usb.c,v 1.15 2020/07/22 17:18:10 riastradh Exp $");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/types.h>
|
|
|
|
#include <sys/buf.h>
|
|
#include <sys/device.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/queue.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/workqueue.h>
|
|
|
|
#include <net/bpf.h>
|
|
#include <net/if.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_ether.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <netinet/in.h>
|
|
|
|
#include <net80211/ieee80211_var.h>
|
|
|
|
#include <dev/usb/usb.h>
|
|
#include <dev/usb/usbdevs.h>
|
|
#include <dev/usb/usbdi.h>
|
|
#include <dev/usb/usbdi_util.h>
|
|
#include <dev/usb/usbdivar.h>
|
|
|
|
#include <dev/ic/bwfmreg.h>
|
|
#include <dev/ic/bwfmvar.h>
|
|
|
|
static const struct bwfm_firmware_selector bwfm_usb_fwtab[] = {
|
|
BWFM_FW_ENTRY(BRCM_CC_43143_CHIP_ID,
|
|
BWFM_FWSEL_ALLREVS, "brcmfmac43143"),
|
|
|
|
BWFM_FW_ENTRY(BRCM_CC_43235_CHIP_ID,
|
|
BWFM_FWSEL_REV_EQ(3), "brcmfmac43236b"),
|
|
BWFM_FW_ENTRY(BRCM_CC_43236_CHIP_ID,
|
|
BWFM_FWSEL_REV_EQ(3), "brcmfmac43236b"),
|
|
BWFM_FW_ENTRY(BRCM_CC_43238_CHIP_ID,
|
|
BWFM_FWSEL_REV_EQ(3), "brcmfmac43236b"),
|
|
|
|
BWFM_FW_ENTRY(BRCM_CC_43242_CHIP_ID,
|
|
BWFM_FWSEL_ALLREVS, "brcmfmac43242a"),
|
|
|
|
BWFM_FW_ENTRY(BRCM_CC_43566_CHIP_ID,
|
|
BWFM_FWSEL_ALLREVS, "brcmfmac43569"),
|
|
BWFM_FW_ENTRY(BRCM_CC_43569_CHIP_ID,
|
|
BWFM_FWSEL_ALLREVS, "brcmfmac43569"),
|
|
|
|
BWFM_FW_ENTRY(CY_CC_4373_CHIP_ID,
|
|
BWFM_FWSEL_ALLREVS, "brcmfmac4373"),
|
|
|
|
BWFM_FW_ENTRY_END
|
|
};
|
|
|
|
/*
|
|
* Various supported device vendors/products.
|
|
*/
|
|
static const struct usb_devno bwfm_usbdevs[] = {
|
|
{ USB_VENDOR_BROADCOM, USB_PRODUCT_BROADCOM_BCM43143 },
|
|
{ USB_VENDOR_BROADCOM, USB_PRODUCT_BROADCOM_BCM43236 },
|
|
{ USB_VENDOR_BROADCOM, USB_PRODUCT_BROADCOM_BCM43242 },
|
|
{ USB_VENDOR_BROADCOM, USB_PRODUCT_BROADCOM_BCM43569 },
|
|
{ USB_VENDOR_BROADCOM, USB_PRODUCT_BROADCOM_BCMFW },
|
|
};
|
|
|
|
#ifdef BWFM_DEBUG
|
|
#define DPRINTF(x) do { if (bwfm_debug > 0) printf x; } while (0)
|
|
#define DPRINTFN(n, x) do { if (bwfm_debug >= (n)) printf x; } while (0)
|
|
static int bwfm_debug = 2;
|
|
#else
|
|
#define DPRINTF(x) do { ; } while (0)
|
|
#define DPRINTFN(n, x) do { ; } while (0)
|
|
#endif
|
|
|
|
#define DEVNAME(sc) device_xname((sc)->sc_sc.sc_dev)
|
|
|
|
#define BRCMF_POSTBOOT_ID 0xA123 /* ID to detect if dongle
|
|
* has boot up
|
|
*/
|
|
|
|
#define TRX_MAGIC 0x30524448 /* "HDR0" */
|
|
#define TRX_MAX_OFFSET 3 /* Max number of file offsets */
|
|
#define TRX_UNCOMP_IMAGE 0x20 /* Trx holds uncompressed img */
|
|
#define TRX_RDL_CHUNK 1500 /* size of each dl transfer */
|
|
#define TRX_OFFSETS_DLFWLEN_IDX 0
|
|
|
|
/* Control messages: bRequest values */
|
|
#define DL_GETSTATE 0 /* returns the rdl_state_t struct */
|
|
#define DL_CHECK_CRC 1 /* currently unused */
|
|
#define DL_GO 2 /* execute downloaded image */
|
|
#define DL_START 3 /* initialize dl state */
|
|
#define DL_REBOOT 4 /* reboot the device in 2 seconds */
|
|
#define DL_GETVER 5 /* returns the bootrom_id_t struct */
|
|
#define DL_GO_PROTECTED 6 /* execute the downloaded code and set reset
|
|
* event to occur in 2 seconds. It is the
|
|
* responsibility of the downloaded code to
|
|
* clear this event
|
|
*/
|
|
#define DL_EXEC 7 /* jump to a supplied address */
|
|
#define DL_RESETCFG 8 /* To support single enum on dongle
|
|
* - Not used by bootloader
|
|
*/
|
|
#define DL_DEFER_RESP_OK 9 /* Potentially defer the response to setup
|
|
* if resp unavailable
|
|
*/
|
|
|
|
/* states */
|
|
#define DL_WAITING 0 /* waiting to rx first pkt */
|
|
#define DL_READY 1 /* hdr was good, waiting for more of the
|
|
* compressed image
|
|
*/
|
|
#define DL_BAD_HDR 2 /* hdr was corrupted */
|
|
#define DL_BAD_CRC 3 /* compressed image was corrupted */
|
|
#define DL_RUNNABLE 4 /* download was successful,waiting for go cmd */
|
|
#define DL_START_FAIL 5 /* failed to initialize correctly */
|
|
#define DL_NVRAM_TOOBIG 6 /* host specified nvram data exceeds DL_NVRAM
|
|
* value
|
|
*/
|
|
#define DL_IMAGE_TOOBIG 7 /* firmware image too big */
|
|
|
|
|
|
struct trx_header {
|
|
uint32_t magic; /* "HDR0" */
|
|
uint32_t len; /* Length of file including header */
|
|
uint32_t crc32; /* CRC from flag_version to end of file */
|
|
uint32_t flag_version; /* 0:15 flags, 16:31 version */
|
|
uint32_t offsets[TRX_MAX_OFFSET];/* Offsets of partitions from start of
|
|
* header
|
|
*/
|
|
};
|
|
|
|
struct rdl_state {
|
|
uint32_t state;
|
|
uint32_t bytes;
|
|
};
|
|
|
|
struct bootrom_id {
|
|
uint32_t chip; /* Chip id */
|
|
uint32_t chiprev; /* Chip rev */
|
|
uint32_t ramsize; /* Size of RAM */
|
|
uint32_t remapbase; /* Current remap base address */
|
|
uint32_t boardtype; /* Type of board */
|
|
uint32_t boardrev; /* Board revision */
|
|
};
|
|
|
|
struct bwfm_usb_rx_data {
|
|
struct bwfm_usb_softc *sc;
|
|
struct usbd_xfer *xfer;
|
|
uint8_t *buf;
|
|
};
|
|
|
|
struct bwfm_usb_tx_data {
|
|
struct bwfm_usb_softc *sc;
|
|
struct usbd_xfer *xfer;
|
|
uint8_t *buf;
|
|
struct mbuf *mbuf;
|
|
TAILQ_ENTRY(bwfm_usb_tx_data) next;
|
|
};
|
|
|
|
#define BWFM_RX_LIST_COUNT 50
|
|
#define BWFM_TX_LIST_COUNT 50
|
|
#define BWFM_RXBUFSZ 1600
|
|
#define BWFM_TXBUFSZ 1600
|
|
struct bwfm_usb_softc {
|
|
struct bwfm_softc sc_sc;
|
|
struct usbd_device *sc_udev;
|
|
struct usbd_interface *sc_iface;
|
|
uint8_t sc_ifaceno;
|
|
|
|
uint16_t sc_vendor;
|
|
uint16_t sc_product;
|
|
|
|
uint32_t sc_chip;
|
|
uint32_t sc_chiprev;
|
|
|
|
int sc_rx_no;
|
|
int sc_tx_no;
|
|
|
|
struct usbd_pipe *sc_rx_pipeh;
|
|
struct usbd_pipe *sc_tx_pipeh;
|
|
|
|
struct bwfm_usb_rx_data sc_rx_data[BWFM_RX_LIST_COUNT];
|
|
struct bwfm_usb_tx_data sc_tx_data[BWFM_TX_LIST_COUNT];
|
|
TAILQ_HEAD(, bwfm_usb_tx_data) sc_tx_free_list;
|
|
|
|
kmutex_t sc_rx_lock;
|
|
kmutex_t sc_tx_lock;
|
|
};
|
|
|
|
int bwfm_usb_match(device_t, cfdata_t, void *);
|
|
void bwfm_usb_attachhook(device_t);
|
|
void bwfm_usb_attach(device_t, device_t, void *);
|
|
int bwfm_usb_detach(device_t, int);
|
|
|
|
int bwfm_usb_dl_cmd(struct bwfm_usb_softc *, uint8_t, void *, int);
|
|
int bwfm_usb_load_microcode(struct bwfm_usb_softc *, const u_char *,
|
|
size_t);
|
|
|
|
int bwfm_usb_alloc_rx_list(struct bwfm_usb_softc *);
|
|
void bwfm_usb_free_rx_list(struct bwfm_usb_softc *);
|
|
int bwfm_usb_alloc_tx_list(struct bwfm_usb_softc *);
|
|
void bwfm_usb_free_tx_list(struct bwfm_usb_softc *);
|
|
|
|
int bwfm_usb_txcheck(struct bwfm_softc *);
|
|
int bwfm_usb_txdata(struct bwfm_softc *, struct mbuf **);
|
|
int bwfm_usb_txctl(struct bwfm_softc *, char *, size_t);
|
|
int bwfm_usb_rxctl(struct bwfm_softc *, char *, size_t *);
|
|
|
|
struct mbuf * bwfm_usb_newbuf(void);
|
|
void bwfm_usb_rxeof(struct usbd_xfer *, void *, usbd_status);
|
|
void bwfm_usb_txeof(struct usbd_xfer *, void *, usbd_status);
|
|
|
|
static const struct bwfm_bus_ops bwfm_usb_bus_ops = {
|
|
.bs_init = NULL,
|
|
.bs_stop = NULL,
|
|
.bs_txcheck = bwfm_usb_txcheck,
|
|
.bs_txdata = bwfm_usb_txdata,
|
|
.bs_txctl = bwfm_usb_txctl,
|
|
.bs_rxctl = bwfm_usb_rxctl,
|
|
};
|
|
|
|
CFATTACH_DECL_NEW(bwfm_usb, sizeof(struct bwfm_usb_softc),
|
|
bwfm_usb_match, bwfm_usb_attach, bwfm_usb_detach, NULL);
|
|
|
|
int
|
|
bwfm_usb_match(device_t parent, cfdata_t match, void *aux)
|
|
{
|
|
struct usb_attach_arg *uaa = aux;
|
|
|
|
return (usb_lookup(bwfm_usbdevs, uaa->uaa_vendor, uaa->uaa_product) != NULL) ?
|
|
UMATCH_VENDOR_PRODUCT_CONF_IFACE : UMATCH_NONE;
|
|
}
|
|
|
|
void
|
|
bwfm_usb_attach(device_t parent, device_t self, void *aux)
|
|
{
|
|
struct bwfm_usb_softc *sc = device_private(self);
|
|
struct usb_attach_arg *uaa = aux;
|
|
usb_device_descriptor_t *dd;
|
|
usb_interface_descriptor_t *id;
|
|
usb_endpoint_descriptor_t *ed;
|
|
char *devinfop;
|
|
int i;
|
|
|
|
sc->sc_sc.sc_dev = self;
|
|
sc->sc_udev = uaa->uaa_device;
|
|
mutex_init(&sc->sc_rx_lock, MUTEX_DEFAULT, IPL_NET);
|
|
mutex_init(&sc->sc_tx_lock, MUTEX_DEFAULT, IPL_NET);
|
|
|
|
aprint_naive("\n");
|
|
|
|
devinfop = usbd_devinfo_alloc(sc->sc_udev, 0);
|
|
aprint_normal(": %s\n", devinfop);
|
|
usbd_devinfo_free(devinfop);
|
|
|
|
if (usbd_set_config_no(sc->sc_udev, 1, 1) != 0) {
|
|
aprint_error_dev(self, "failed to set configuration\n");
|
|
return;
|
|
}
|
|
if (usbd_device2interface_handle(sc->sc_udev, 0, &sc->sc_iface) != 0) {
|
|
aprint_error_dev(self, "failed to get interface handle\n");
|
|
return;
|
|
}
|
|
|
|
sc->sc_ifaceno = 0;
|
|
sc->sc_vendor = uaa->uaa_vendor;
|
|
sc->sc_product = uaa->uaa_product;
|
|
sc->sc_sc.sc_bus_ops = &bwfm_usb_bus_ops;
|
|
sc->sc_sc.sc_proto_ops = &bwfm_proto_bcdc_ops;
|
|
|
|
/* Check number of configurations. */
|
|
dd = usbd_get_device_descriptor(sc->sc_udev);
|
|
if (dd->bNumConfigurations != 1) {
|
|
printf("%s: number of configurations not supported\n",
|
|
DEVNAME(sc));
|
|
return;
|
|
}
|
|
|
|
/* Get endpoints. */
|
|
id = usbd_get_interface_descriptor(sc->sc_iface);
|
|
|
|
sc->sc_rx_no = sc->sc_tx_no = -1;
|
|
for (i = 0; i < id->bNumEndpoints; i++) {
|
|
ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i);
|
|
if (ed == NULL) {
|
|
printf("%s: no endpoint descriptor for iface %d\n",
|
|
DEVNAME(sc), i);
|
|
return;
|
|
}
|
|
|
|
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
|
|
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK &&
|
|
sc->sc_rx_no == -1)
|
|
sc->sc_rx_no = ed->bEndpointAddress;
|
|
else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
|
|
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK &&
|
|
sc->sc_tx_no == -1)
|
|
sc->sc_tx_no = ed->bEndpointAddress;
|
|
}
|
|
if (sc->sc_rx_no == -1 || sc->sc_tx_no == -1) {
|
|
printf("%s: missing endpoint\n", DEVNAME(sc));
|
|
return;
|
|
}
|
|
|
|
config_mountroot(self, bwfm_usb_attachhook);
|
|
}
|
|
|
|
void
|
|
bwfm_usb_attachhook(device_t self)
|
|
{
|
|
struct bwfm_usb_softc *sc = device_private(self);
|
|
struct bwfm_softc *bwfm = &sc->sc_sc;
|
|
struct bwfm_usb_rx_data *data;
|
|
struct bootrom_id brom;
|
|
struct bwfm_firmware_context fwctx;
|
|
usbd_status error;
|
|
u_char *ucode;
|
|
size_t ucsize;
|
|
int i;
|
|
|
|
/* Read chip id and chip rev to check the firmware. */
|
|
memset(&brom, 0, sizeof(brom));
|
|
bwfm_usb_dl_cmd(sc, DL_GETVER, &brom, sizeof(brom));
|
|
sc->sc_chip = le32toh(brom.chip);
|
|
sc->sc_chiprev = le32toh(brom.chiprev);
|
|
|
|
/* Setup data pipes */
|
|
error = usbd_open_pipe(sc->sc_iface, sc->sc_rx_no, USBD_EXCLUSIVE_USE,
|
|
&sc->sc_rx_pipeh);
|
|
if (error != 0) {
|
|
aprint_error_dev(bwfm->sc_dev, "could not open rx pipe: %s\n",
|
|
usbd_errstr(error));
|
|
return;
|
|
}
|
|
error = usbd_open_pipe(sc->sc_iface, sc->sc_tx_no, USBD_EXCLUSIVE_USE,
|
|
&sc->sc_tx_pipeh);
|
|
if (error != 0) {
|
|
aprint_error_dev(bwfm->sc_dev, "could not open tx pipe: %s\n",
|
|
usbd_errstr(error));
|
|
return;
|
|
}
|
|
|
|
/* Firmware not yet loaded? */
|
|
if (sc->sc_chip != BRCMF_POSTBOOT_ID) {
|
|
bwfm_firmware_context_init(&fwctx,
|
|
sc->sc_chip, sc->sc_chiprev, NULL,
|
|
BWFM_FWREQ(BWFM_FILETYPE_UCODE));
|
|
|
|
if (!bwfm_firmware_open(bwfm, bwfm_usb_fwtab, &fwctx)) {
|
|
/* Error message already displayed. */
|
|
return;
|
|
}
|
|
|
|
ucode = bwfm_firmware_data(&fwctx, BWFM_FILETYPE_UCODE,
|
|
&ucsize);
|
|
KASSERT(ucode != NULL);
|
|
|
|
if (bwfm_usb_load_microcode(sc, ucode, ucsize) != 0) {
|
|
aprint_error_dev(bwfm->sc_dev,
|
|
"could not load microcode\n");
|
|
bwfm_firmware_close(&fwctx);
|
|
return;
|
|
}
|
|
|
|
bwfm_firmware_close(&fwctx);
|
|
|
|
for (i = 0; i < 10; i++) {
|
|
delay(100 * 1000);
|
|
memset(&brom, 0, sizeof(brom));
|
|
bwfm_usb_dl_cmd(sc, DL_GETVER, &brom, sizeof(brom));
|
|
if (le32toh(brom.chip) == BRCMF_POSTBOOT_ID)
|
|
break;
|
|
}
|
|
|
|
if (le32toh(brom.chip) != BRCMF_POSTBOOT_ID) {
|
|
aprint_error_dev(bwfm->sc_dev,
|
|
"firmware did not start up\n");
|
|
return;
|
|
}
|
|
|
|
sc->sc_chip = le32toh(brom.chip);
|
|
sc->sc_chiprev = le32toh(brom.chiprev);
|
|
}
|
|
|
|
bwfm_usb_dl_cmd(sc, DL_RESETCFG, &brom, sizeof(brom));
|
|
|
|
if (bwfm_usb_alloc_rx_list(sc) || bwfm_usb_alloc_tx_list(sc)) {
|
|
printf("%s: cannot allocate rx/tx lists\n", DEVNAME(sc));
|
|
return;
|
|
}
|
|
|
|
bwfm_attach(&sc->sc_sc);
|
|
|
|
for (i = 0; i < BWFM_RX_LIST_COUNT; i++) {
|
|
data = &sc->sc_rx_data[i];
|
|
|
|
usbd_setup_xfer(data->xfer, data, data->buf,
|
|
BWFM_RXBUFSZ, USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT,
|
|
bwfm_usb_rxeof);
|
|
error = usbd_transfer(data->xfer);
|
|
if (error != 0 && error != USBD_IN_PROGRESS)
|
|
aprint_error_dev(bwfm->sc_dev,
|
|
"could not set up new transfer: %s\n",
|
|
usbd_errstr(error));
|
|
}
|
|
}
|
|
|
|
struct mbuf *
|
|
bwfm_usb_newbuf(void)
|
|
{
|
|
struct mbuf *m;
|
|
|
|
MGETHDR(m, M_DONTWAIT, MT_DATA);
|
|
if (m == NULL)
|
|
return (NULL);
|
|
|
|
MCLGET(m, M_DONTWAIT);
|
|
if (!(m->m_flags & M_EXT)) {
|
|
m_freem(m);
|
|
return (NULL);
|
|
}
|
|
|
|
m->m_len = m->m_pkthdr.len = MCLBYTES;
|
|
|
|
return (m);
|
|
}
|
|
|
|
void
|
|
bwfm_usb_rxeof(struct usbd_xfer *xfer, void *priv, usbd_status status)
|
|
{
|
|
struct bwfm_usb_rx_data *data = priv;
|
|
struct bwfm_usb_softc *sc = data->sc;
|
|
struct bwfm_proto_bcdc_hdr *hdr;
|
|
usbd_status error;
|
|
uint32_t len, off;
|
|
struct mbuf *m;
|
|
|
|
DPRINTFN(2, ("%s: %s status %s\n", DEVNAME(sc), __func__,
|
|
usbd_errstr(status)));
|
|
|
|
if (__predict_false(status != USBD_NORMAL_COMPLETION)) {
|
|
usbd_clear_endpoint_stall_async(sc->sc_rx_pipeh);
|
|
if (status != USBD_CANCELLED)
|
|
goto resubmit;
|
|
return;
|
|
}
|
|
usbd_get_xfer_status(xfer, NULL, NULL, &len, NULL);
|
|
|
|
off = 0;
|
|
hdr = (void *)data->buf;
|
|
if (len < sizeof(*hdr))
|
|
goto resubmit;
|
|
len -= sizeof(*hdr);
|
|
off += sizeof(*hdr);
|
|
if (len <= hdr->data_offset << 2)
|
|
goto resubmit;
|
|
len -= hdr->data_offset << 2;
|
|
off += hdr->data_offset << 2;
|
|
|
|
m = bwfm_usb_newbuf();
|
|
if (m == NULL)
|
|
goto resubmit;
|
|
|
|
memcpy(mtod(m, char *), data->buf + off, len);
|
|
m->m_len = m->m_pkthdr.len = len;
|
|
mutex_enter(&sc->sc_rx_lock); /* XXX */
|
|
bwfm_rx(&sc->sc_sc, m);
|
|
mutex_exit(&sc->sc_rx_lock);
|
|
|
|
resubmit:
|
|
usbd_setup_xfer(data->xfer, data, data->buf,
|
|
BWFM_RXBUFSZ, USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT,
|
|
bwfm_usb_rxeof);
|
|
error = usbd_transfer(data->xfer);
|
|
if (error != 0 && error != USBD_IN_PROGRESS)
|
|
printf("%s: could not set up new transfer: %s\n",
|
|
DEVNAME(sc), usbd_errstr(error));
|
|
}
|
|
|
|
int
|
|
bwfm_usb_alloc_rx_list(struct bwfm_usb_softc *sc)
|
|
{
|
|
struct bwfm_usb_rx_data *data;
|
|
int i, error = 0;
|
|
|
|
for (i = 0; i < BWFM_RX_LIST_COUNT; i++) {
|
|
data = &sc->sc_rx_data[i];
|
|
|
|
data->sc = sc; /* Backpointer for callbacks. */
|
|
|
|
if (usbd_create_xfer(sc->sc_rx_pipeh, BWFM_RXBUFSZ,
|
|
0, 0, &data->xfer) != 0) {
|
|
printf("%s: could not create xfer\n",
|
|
DEVNAME(sc));
|
|
error = ENOMEM;
|
|
break;
|
|
}
|
|
data->buf = usbd_get_buffer(data->xfer);
|
|
}
|
|
if (error != 0)
|
|
bwfm_usb_free_rx_list(sc);
|
|
return (error);
|
|
}
|
|
|
|
void
|
|
bwfm_usb_free_rx_list(struct bwfm_usb_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
/* NB: Caller must abort pipe first. */
|
|
for (i = 0; i < BWFM_RX_LIST_COUNT; i++) {
|
|
if (sc->sc_rx_data[i].xfer != NULL)
|
|
usbd_destroy_xfer(sc->sc_rx_data[i].xfer);
|
|
sc->sc_rx_data[i].xfer = NULL;
|
|
}
|
|
}
|
|
|
|
int
|
|
bwfm_usb_alloc_tx_list(struct bwfm_usb_softc *sc)
|
|
{
|
|
struct bwfm_usb_tx_data *data;
|
|
int i, error = 0;
|
|
|
|
TAILQ_INIT(&sc->sc_tx_free_list);
|
|
for (i = 0; i < BWFM_TX_LIST_COUNT; i++) {
|
|
data = &sc->sc_tx_data[i];
|
|
|
|
data->sc = sc; /* Backpointer for callbacks. */
|
|
|
|
if (usbd_create_xfer(sc->sc_tx_pipeh, BWFM_TXBUFSZ,
|
|
USBD_FORCE_SHORT_XFER, 0, &data->xfer) != 0) {
|
|
printf("%s: could not create xfer\n",
|
|
DEVNAME(sc));
|
|
error = ENOMEM;
|
|
break;
|
|
}
|
|
data->buf = usbd_get_buffer(data->xfer);
|
|
|
|
/* Append this Tx buffer to our free list. */
|
|
TAILQ_INSERT_TAIL(&sc->sc_tx_free_list, data, next);
|
|
}
|
|
if (error != 0)
|
|
bwfm_usb_free_tx_list(sc);
|
|
return (error);
|
|
}
|
|
|
|
void
|
|
bwfm_usb_free_tx_list(struct bwfm_usb_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
/* NB: Caller must abort pipe first. */
|
|
for (i = 0; i < BWFM_TX_LIST_COUNT; i++) {
|
|
if (sc->sc_tx_data[i].xfer != NULL)
|
|
usbd_destroy_xfer(sc->sc_tx_data[i].xfer);
|
|
sc->sc_tx_data[i].xfer = NULL;
|
|
}
|
|
}
|
|
|
|
void
|
|
bwfm_usb_txeof(struct usbd_xfer *xfer, void *priv, usbd_status status)
|
|
{
|
|
struct bwfm_usb_tx_data *data = priv;
|
|
struct bwfm_usb_softc *sc = data->sc;
|
|
struct ifnet *ifp = sc->sc_sc.sc_ic.ic_ifp;
|
|
int s;
|
|
|
|
DPRINTFN(2, ("%s: %s status %s\n", DEVNAME(sc), __func__,
|
|
usbd_errstr(status)));
|
|
|
|
m_freem(data->mbuf);
|
|
data->mbuf = NULL;
|
|
|
|
mutex_enter(&sc->sc_tx_lock);
|
|
/* Put this Tx buffer back to our free list. */
|
|
TAILQ_INSERT_TAIL(&sc->sc_tx_free_list, data, next);
|
|
mutex_exit(&sc->sc_tx_lock);
|
|
|
|
s = splnet();
|
|
|
|
if (__predict_false(status != USBD_NORMAL_COMPLETION)) {
|
|
if (status == USBD_CANCELLED)
|
|
usbd_clear_endpoint_stall_async(sc->sc_tx_pipeh);
|
|
if_statinc(ifp, if_oerrors);
|
|
splx(s);
|
|
return;
|
|
}
|
|
|
|
if_statinc(ifp, if_opackets);
|
|
|
|
/* We just released a Tx buffer, notify Tx. */
|
|
if ((ifp->if_flags & IFF_OACTIVE) != 0) {
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
if_schedule_deferred_start(ifp);
|
|
}
|
|
splx(s);
|
|
}
|
|
|
|
int
|
|
bwfm_usb_detach(device_t self, int flags)
|
|
{
|
|
struct bwfm_usb_softc *sc = device_private(self);
|
|
|
|
bwfm_detach(&sc->sc_sc, flags);
|
|
|
|
if (sc->sc_rx_pipeh != NULL) {
|
|
usbd_abort_pipe(sc->sc_rx_pipeh);
|
|
usbd_close_pipe(sc->sc_rx_pipeh);
|
|
}
|
|
if (sc->sc_tx_pipeh != NULL) {
|
|
usbd_abort_pipe(sc->sc_tx_pipeh);
|
|
usbd_close_pipe(sc->sc_tx_pipeh);
|
|
}
|
|
|
|
bwfm_usb_free_rx_list(sc);
|
|
bwfm_usb_free_tx_list(sc);
|
|
|
|
mutex_destroy(&sc->sc_rx_lock);
|
|
mutex_destroy(&sc->sc_tx_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
bwfm_usb_dl_cmd(struct bwfm_usb_softc *sc, uByte cmd, void *buf, int len)
|
|
{
|
|
usb_device_request_t req;
|
|
usbd_status error;
|
|
|
|
req.bmRequestType = UT_READ_VENDOR_INTERFACE;
|
|
req.bRequest = cmd;
|
|
|
|
USETW(req.wValue, 0);
|
|
USETW(req.wIndex, sc->sc_ifaceno);
|
|
USETW(req.wLength, len);
|
|
|
|
error = usbd_do_request(sc->sc_udev, &req, buf);
|
|
if (error != 0) {
|
|
printf("%s: could not read register: %s\n",
|
|
DEVNAME(sc), usbd_errstr(error));
|
|
}
|
|
return error;
|
|
}
|
|
|
|
int
|
|
bwfm_usb_load_microcode(struct bwfm_usb_softc *sc, const u_char *ucode, size_t size)
|
|
{
|
|
const struct trx_header *trx = (const struct trx_header *)ucode;
|
|
struct rdl_state state;
|
|
uint32_t rdlstate, rdlbytes, sent = 0, sendlen = 0;
|
|
struct usbd_xfer *xfer;
|
|
usbd_status error;
|
|
char *buf;
|
|
|
|
if (le32toh(trx->magic) != TRX_MAGIC ||
|
|
(le32toh(trx->flag_version) & TRX_UNCOMP_IMAGE) == 0) {
|
|
printf("%s: invalid firmware\n", DEVNAME(sc));
|
|
return 1;
|
|
}
|
|
|
|
bwfm_usb_dl_cmd(sc, DL_START, &state, sizeof(state));
|
|
rdlstate = le32toh(state.state);
|
|
rdlbytes = le32toh(state.bytes);
|
|
|
|
if (rdlstate != DL_WAITING) {
|
|
printf("%s: cannot start fw download\n", DEVNAME(sc));
|
|
return 1;
|
|
}
|
|
|
|
error = usbd_create_xfer(sc->sc_tx_pipeh, TRX_RDL_CHUNK,
|
|
0, 0, &xfer);
|
|
if (error != 0) {
|
|
printf("%s: cannot create xfer\n", DEVNAME(sc));
|
|
goto err;
|
|
}
|
|
|
|
buf = usbd_get_buffer(xfer);
|
|
|
|
while (rdlbytes != size) {
|
|
sendlen = MIN(size - sent, TRX_RDL_CHUNK);
|
|
memcpy(buf, ucode + sent, sendlen);
|
|
|
|
usbd_setup_xfer(xfer, NULL, buf, sendlen,
|
|
USBD_SYNCHRONOUS, USBD_NO_TIMEOUT, NULL);
|
|
error = usbd_transfer(xfer);
|
|
if (error != 0 && error != USBD_IN_PROGRESS) {
|
|
printf("%s: transfer error\n", DEVNAME(sc));
|
|
goto err;
|
|
}
|
|
sent += sendlen;
|
|
|
|
bwfm_usb_dl_cmd(sc, DL_GETSTATE, &state, sizeof(state));
|
|
rdlstate = le32toh(state.state);
|
|
rdlbytes = le32toh(state.bytes);
|
|
|
|
if (rdlbytes != sent) {
|
|
printf("%s: device reported different size\n",
|
|
DEVNAME(sc));
|
|
goto err;
|
|
}
|
|
|
|
if (rdlstate == DL_BAD_HDR || rdlstate == DL_BAD_CRC) {
|
|
printf("%s: device reported bad hdr/crc\n",
|
|
DEVNAME(sc));
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
bwfm_usb_dl_cmd(sc, DL_GETSTATE, &state, sizeof(state));
|
|
rdlstate = le32toh(state.state);
|
|
rdlbytes = le32toh(state.bytes);
|
|
|
|
if (rdlstate != DL_RUNNABLE) {
|
|
printf("%s: dongle not runnable\n", DEVNAME(sc));
|
|
goto err;
|
|
}
|
|
|
|
bwfm_usb_dl_cmd(sc, DL_GO, &state, sizeof(state));
|
|
|
|
usbd_destroy_xfer(xfer);
|
|
|
|
return 0;
|
|
err:
|
|
if (sc->sc_tx_pipeh != NULL) {
|
|
usbd_abort_pipe(sc->sc_tx_pipeh);
|
|
usbd_close_pipe(sc->sc_tx_pipeh);
|
|
sc->sc_tx_pipeh = NULL;
|
|
}
|
|
if (xfer != NULL)
|
|
usbd_destroy_xfer(xfer);
|
|
return 1;
|
|
}
|
|
|
|
int
|
|
bwfm_usb_txcheck(struct bwfm_softc *bwfm)
|
|
{
|
|
struct bwfm_usb_softc *sc = (void *)bwfm;
|
|
|
|
mutex_enter(&sc->sc_tx_lock);
|
|
|
|
if (TAILQ_EMPTY(&sc->sc_tx_free_list)) {
|
|
mutex_exit(&sc->sc_tx_lock);
|
|
return ENOBUFS;
|
|
}
|
|
|
|
mutex_exit(&sc->sc_tx_lock);
|
|
return 0;
|
|
}
|
|
|
|
|
|
int
|
|
bwfm_usb_txdata(struct bwfm_softc *bwfm, struct mbuf **mp)
|
|
{
|
|
struct bwfm_usb_softc *sc = (void *)bwfm;
|
|
struct mbuf *m = *mp;
|
|
struct bwfm_proto_bcdc_hdr *hdr;
|
|
struct bwfm_usb_tx_data *data;
|
|
struct ether_header *eh;
|
|
uint32_t len = 0;
|
|
int error, ac;
|
|
|
|
DPRINTFN(2, ("%s: %s\n", DEVNAME(sc), __func__));
|
|
|
|
mutex_enter(&sc->sc_tx_lock);
|
|
|
|
if (TAILQ_EMPTY(&sc->sc_tx_free_list)) {
|
|
mutex_exit(&sc->sc_tx_lock);
|
|
return ENOBUFS;
|
|
}
|
|
|
|
/* No QoS for EAPOL frames. */
|
|
eh = mtod(m, struct ether_header *);
|
|
ac = (eh->ether_type != htons(ETHERTYPE_PAE)) ?
|
|
M_WME_GETAC(m) : WME_AC_BE;
|
|
|
|
/* Grab a Tx buffer from our free list. */
|
|
data = TAILQ_FIRST(&sc->sc_tx_free_list);
|
|
TAILQ_REMOVE(&sc->sc_tx_free_list, data, next);
|
|
|
|
mutex_exit(&sc->sc_tx_lock);
|
|
|
|
hdr = (void *)&data->buf[len];
|
|
hdr->data_offset = 0;
|
|
hdr->priority = ac;
|
|
hdr->flags = BWFM_BCDC_FLAG_VER(BWFM_BCDC_FLAG_PROTO_VER);
|
|
hdr->flags2 = 0;
|
|
len += sizeof(*hdr);
|
|
|
|
m_copydata(m, 0, m->m_pkthdr.len, &data->buf[len]);
|
|
len += m->m_pkthdr.len;
|
|
|
|
data->mbuf = m;
|
|
|
|
usbd_setup_xfer(data->xfer, data, data->buf,
|
|
len, USBD_FORCE_SHORT_XFER, USBD_NO_TIMEOUT,
|
|
bwfm_usb_txeof);
|
|
error = usbd_transfer(data->xfer);
|
|
if (error != 0 && error != USBD_IN_PROGRESS)
|
|
printf("%s: could not set up new transfer: %s\n",
|
|
DEVNAME(sc), usbd_errstr(error));
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
bwfm_usb_txctl(struct bwfm_softc *bwfm, char *buf, size_t len)
|
|
{
|
|
struct bwfm_usb_softc *sc = (void *)bwfm;
|
|
usb_device_request_t req;
|
|
usbd_status error;
|
|
int ret = 1;
|
|
|
|
DPRINTFN(2, ("%s: %s\n", DEVNAME(sc), __func__));
|
|
|
|
req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
|
|
req.bRequest = 0;
|
|
|
|
USETW(req.wValue, 0);
|
|
USETW(req.wIndex, sc->sc_ifaceno);
|
|
USETW(req.wLength, len);
|
|
|
|
error = usbd_do_request(sc->sc_udev, &req, buf);
|
|
if (error != 0) {
|
|
printf("%s: could not read ctl packet: %s\n",
|
|
DEVNAME(sc), usbd_errstr(error));
|
|
goto err;
|
|
}
|
|
|
|
ret = 0;
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
int
|
|
bwfm_usb_rxctl(struct bwfm_softc *bwfm, char *buf, size_t *len)
|
|
{
|
|
struct bwfm_usb_softc *sc = (void *)bwfm;
|
|
usb_device_request_t req;
|
|
usbd_status error;
|
|
uint32_t len32;
|
|
int ret = 1;
|
|
|
|
DPRINTFN(2, ("%s: %s\n", DEVNAME(sc), __func__));
|
|
|
|
req.bmRequestType = UT_READ_CLASS_INTERFACE;
|
|
req.bRequest = 1;
|
|
|
|
USETW(req.wValue, 0);
|
|
USETW(req.wIndex, sc->sc_ifaceno);
|
|
USETW(req.wLength, *len);
|
|
|
|
error = usbd_do_request_flags(sc->sc_udev, &req, buf, 0,
|
|
&len32, USBD_DEFAULT_TIMEOUT);
|
|
if (error != 0) {
|
|
printf("%s: could not read ctl packet: %s\n",
|
|
DEVNAME(sc), usbd_errstr(error));
|
|
goto err;
|
|
}
|
|
|
|
if (len32 > *len) {
|
|
printf("%s: broken length\n", DEVNAME(sc));
|
|
goto err;
|
|
}
|
|
|
|
*len = len32;
|
|
ret = 0;
|
|
err:
|
|
return ret;
|
|
}
|