Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/arch/sgimips/hpc/if_sq.c

1219 lines
32 KiB
C
Raw Blame History

/* $NetBSD: if_sq.c,v 1.20 2003/12/30 23:48:07 sekiya Exp $ */
/*
* Copyright (c) 2001 Rafal K. Boni
* Copyright (c) 1998, 1999, 2000 The NetBSD Foundation, Inc.
* All rights reserved.
*
* Portions of this code are derived from software contributed to The
* NetBSD Foundation by Jason R. Thorpe of the Numerical Aerospace
* Simulation Facility, NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: if_sq.c,v 1.20 2003/12/30 23:48:07 sekiya Exp $");
#include "bpfilter.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/callout.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <sys/errno.h>
#include <sys/syslog.h>
#include <uvm/uvm_extern.h>
#include <machine/endian.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_ether.h>
#if NBPFILTER > 0
#include <net/bpf.h>
#endif
#include <machine/bus.h>
#include <machine/intr.h>
#include <dev/ic/seeq8003reg.h>
#include <sgimips/hpc/sqvar.h>
#include <sgimips/hpc/hpcvar.h>
#include <sgimips/hpc/hpcreg.h>
#include <dev/arcbios/arcbios.h>
#include <dev/arcbios/arcbiosvar.h>
#define static
/*
* Short TODO list:
* (1) Do counters for bad-RX packets.
* (2) Allow multi-segment transmits, instead of copying to a single,
* contiguous mbuf.
* (3) Verify sq_stop() turns off enough stuff; I was still getting
* seeq interrupts after sq_stop().
* (4) Implement EDLC modes: especially packet auto-pad and simplex
* mode.
* (5) Should the driver filter out its own transmissions in non-EDLC
* mode?
* (6) Multicast support -- multicast filter, address management, ...
* (7) Deal with RB0 (recv buffer overflow) on reception. Will need
* to figure out if RB0 is read-only as stated in one spot in the
* HPC spec or read-write (ie, is the 'write a one to clear it')
* the correct thing?
*/
#if defined(SQ_DEBUG)
int sq_debug = 0;
#define SQ_DPRINTF(x) if (sq_debug) printf x
#else
#define SQ_DPRINTF(x)
#endif
static int sq_match(struct device *, struct cfdata *, void *);
static void sq_attach(struct device *, struct device *, void *);
static int sq_init(struct ifnet *);
static void sq_start(struct ifnet *);
static void sq_stop(struct ifnet *, int);
static void sq_watchdog(struct ifnet *);
static int sq_ioctl(struct ifnet *, u_long, caddr_t);
static void sq_set_filter(struct sq_softc *);
static int sq_intr(void *);
static int sq_rxintr(struct sq_softc *);
static int sq_txintr(struct sq_softc *);
static void sq_reset(struct sq_softc *);
static int sq_add_rxbuf(struct sq_softc *, int);
static void sq_dump_buffer(u_int32_t addr, u_int32_t len);
static void enaddr_aton(const char*, u_int8_t*);
/* Actions */
#define SQ_RESET 1
#define SQ_ADD_TO_DMA 2
#define SQ_START_DMA 3
#define SQ_DONE_DMA 4
#define SQ_RESTART_DMA 5
#define SQ_TXINTR_ENTER 6
#define SQ_TXINTR_EXIT 7
#define SQ_TXINTR_BUSY 8
struct sq_action_trace {
int action;
int bufno;
int status;
int freebuf;
};
#define SQ_TRACEBUF_SIZE 100
int sq_trace_idx = 0;
struct sq_action_trace sq_trace[SQ_TRACEBUF_SIZE];
void sq_trace_dump(struct sq_softc* sc);
#define SQ_TRACE(act, buf, stat, free) do { \
sq_trace[sq_trace_idx].action = (act); \
sq_trace[sq_trace_idx].bufno = (buf); \
sq_trace[sq_trace_idx].status = (stat); \
sq_trace[sq_trace_idx].freebuf = (free); \
if (++sq_trace_idx == SQ_TRACEBUF_SIZE) { \
memset(&sq_trace, 0, sizeof(sq_trace)); \
sq_trace_idx = 0; \
} \
} while (0)
CFATTACH_DECL(sq, sizeof(struct sq_softc),
sq_match, sq_attach, NULL, NULL);
#define ETHER_PAD_LEN (ETHER_MIN_LEN - ETHER_CRC_LEN)
static int
sq_match(struct device *parent, struct cfdata *cf, void *aux)
{
struct hpc_attach_args *ha = aux;
if (strcmp(ha->ha_name, cf->cf_name) == 0)
return (1);
return (0);
}
static void
sq_attach(struct device *parent, struct device *self, void *aux)
{
int i, err;
char* macaddr;
struct sq_softc *sc = (void *)self;
struct hpc_attach_args *haa = aux;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
sc->sc_hpct = haa->ha_st;
sc->hpc_regs = haa->hpc_regs; /* HPC register definitions */
if ((err = bus_space_subregion(haa->ha_st, haa->ha_sh,
haa->ha_dmaoff,
sc->hpc_regs->enet_regs_size,
&sc->sc_hpch)) != 0) {
printf(": unable to map HPC DMA registers, error = %d\n", err);
goto fail_0;
}
sc->sc_regt = haa->ha_st;
if ((err = bus_space_subregion(haa->ha_st, haa->ha_sh,
haa->ha_devoff,
sc->hpc_regs->enet_devregs_size,
&sc->sc_regh)) != 0) {
printf(": unable to map Seeq registers, error = %d\n", err);
goto fail_0;
}
sc->sc_dmat = haa->ha_dmat;
if ((err = bus_dmamem_alloc(sc->sc_dmat, sizeof(struct sq_control),
PAGE_SIZE, PAGE_SIZE, &sc->sc_cdseg,
1, &sc->sc_ncdseg, BUS_DMA_NOWAIT)) != 0) {
printf(": unable to allocate control data, error = %d\n", err);
goto fail_0;
}
if ((err = bus_dmamem_map(sc->sc_dmat, &sc->sc_cdseg, sc->sc_ncdseg,
sizeof(struct sq_control),
(caddr_t *)&sc->sc_control,
BUS_DMA_NOWAIT | BUS_DMA_COHERENT)) != 0) {
printf(": unable to map control data, error = %d\n", err);
goto fail_1;
}
if ((err = bus_dmamap_create(sc->sc_dmat, sizeof(struct sq_control),
1, sizeof(struct sq_control), PAGE_SIZE,
BUS_DMA_NOWAIT, &sc->sc_cdmap)) != 0) {
printf(": unable to create DMA map for control data, error "
"= %d\n", err);
goto fail_2;
}
if ((err = bus_dmamap_load(sc->sc_dmat, sc->sc_cdmap, sc->sc_control,
sizeof(struct sq_control),
NULL, BUS_DMA_NOWAIT)) != 0) {
printf(": unable to load DMA map for control data, error "
"= %d\n", err);
goto fail_3;
}
memset(sc->sc_control, 0, sizeof(struct sq_control));
/* Create transmit buffer DMA maps */
for (i = 0; i < SQ_NTXDESC; i++) {
if ((err = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, MCLBYTES,
0, BUS_DMA_NOWAIT,
&sc->sc_txmap[i])) != 0) {
printf(": unable to create tx DMA map %d, error = %d\n",
i, err);
goto fail_4;
}
}
/* Create receive buffer DMA maps */
for (i = 0; i < SQ_NRXDESC; i++) {
if ((err = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, MCLBYTES,
0, BUS_DMA_NOWAIT,
&sc->sc_rxmap[i])) != 0) {
printf(": unable to create rx DMA map %d, error = %d\n",
i, err);
goto fail_5;
}
}
/* Pre-allocate the receive buffers. */
for (i = 0; i < SQ_NRXDESC; i++) {
if ((err = sq_add_rxbuf(sc, i)) != 0) {
printf(": unable to allocate or map rx buffer %d\n,"
" error = %d\n", i, err);
goto fail_6;
}
}
if ((macaddr = ARCBIOS->GetEnvironmentVariable("eaddr")) == NULL) {
printf(": unable to get MAC address!\n");
goto fail_6;
}
evcnt_attach_dynamic(&sc->sq_intrcnt, EVCNT_TYPE_INTR, NULL,
self->dv_xname, "intr");
if ((cpu_intr_establish(haa->ha_irq, IPL_NET, sq_intr, sc)) == NULL) {
printf(": unable to establish interrupt!\n");
goto fail_6;
}
/* Reset the chip to a known state. */
sq_reset(sc);
/*
* Determine if we're an 8003 or 80c03 by setting the first
* MAC address register to non-zero, and then reading it back.
* If it's zero, we have an 80c03, because we will have read
* the TxCollLSB register.
*/
bus_space_write_1(sc->sc_regt, sc->sc_regh, SEEQ_TXCOLLS0, 0xa5);
if (bus_space_read_1(sc->sc_regt, sc->sc_regh, SEEQ_TXCOLLS0) == 0)
sc->sc_type = SQ_TYPE_80C03;
else
sc->sc_type = SQ_TYPE_8003;
bus_space_write_1(sc->sc_regt, sc->sc_regh, SEEQ_TXCOLLS0, 0x00);
printf(": SGI Seeq %s\n",
sc->sc_type == SQ_TYPE_80C03 ? "80c03" : "8003");
enaddr_aton(macaddr, sc->sc_enaddr);
printf("%s: Ethernet address %s\n", sc->sc_dev.dv_xname,
ether_sprintf(sc->sc_enaddr));
strcpy(ifp->if_xname, sc->sc_dev.dv_xname);
ifp->if_softc = sc;
ifp->if_mtu = ETHERMTU;
ifp->if_init = sq_init;
ifp->if_stop = sq_stop;
ifp->if_start = sq_start;
ifp->if_ioctl = sq_ioctl;
ifp->if_watchdog = sq_watchdog;
ifp->if_flags = IFF_BROADCAST | IFF_NOTRAILERS | IFF_MULTICAST;
IFQ_SET_READY(&ifp->if_snd);
if_attach(ifp);
ether_ifattach(ifp, sc->sc_enaddr);
memset(&sq_trace, 0, sizeof(sq_trace));
/* Done! */
return;
/*
* Free any resources we've allocated during the failed attach
* attempt. Do this in reverse order and fall through.
*/
fail_6:
for (i = 0; i < SQ_NRXDESC; i++) {
if (sc->sc_rxmbuf[i] != NULL) {
bus_dmamap_unload(sc->sc_dmat, sc->sc_rxmap[i]);
m_freem(sc->sc_rxmbuf[i]);
}
}
fail_5:
for (i = 0; i < SQ_NRXDESC; i++) {
if (sc->sc_rxmap[i] != NULL)
bus_dmamap_destroy(sc->sc_dmat, sc->sc_rxmap[i]);
}
fail_4:
for (i = 0; i < SQ_NTXDESC; i++) {
if (sc->sc_txmap[i] != NULL)
bus_dmamap_destroy(sc->sc_dmat, sc->sc_txmap[i]);
}
bus_dmamap_unload(sc->sc_dmat, sc->sc_cdmap);
fail_3:
bus_dmamap_destroy(sc->sc_dmat, sc->sc_cdmap);
fail_2:
bus_dmamem_unmap(sc->sc_dmat, (caddr_t) sc->sc_control,
sizeof(struct sq_control));
fail_1:
bus_dmamem_free(sc->sc_dmat, &sc->sc_cdseg, sc->sc_ncdseg);
fail_0:
return;
}
/* Set up data to get the interface up and running. */
int
sq_init(struct ifnet *ifp)
{
int i;
u_int32_t reg;
struct sq_softc *sc = ifp->if_softc;
/* Cancel any in-progress I/O */
sq_stop(ifp, 0);
sc->sc_nextrx = 0;
sc->sc_nfreetx = SQ_NTXDESC;
sc->sc_nexttx = sc->sc_prevtx = 0;
SQ_TRACE(SQ_RESET, 0, 0, sc->sc_nfreetx);
/* Set into 8003 mode, bank 0 to program ethernet address */
bus_space_write_1(sc->sc_regt, sc->sc_regh, SEEQ_TXCMD, TXCMD_BANK0);
/* Now write the address */
for (i = 0; i < ETHER_ADDR_LEN; i++)
bus_space_write_1(sc->sc_regt, sc->sc_regh, i,
sc->sc_enaddr[i]);
sc->sc_rxcmd = RXCMD_IE_CRC |
RXCMD_IE_DRIB |
RXCMD_IE_SHORT |
RXCMD_IE_END |
RXCMD_IE_GOOD;
/*
* Set the receive filter -- this will add some bits to the
* prototype RXCMD register. Do this before setting the
* transmit config register, since we might need to switch
* banks.
*/
sq_set_filter(sc);
/* Set up Seeq transmit command register */
bus_space_write_1(sc->sc_regt, sc->sc_regh, SEEQ_TXCMD,
TXCMD_IE_UFLOW |
TXCMD_IE_COLL |
TXCMD_IE_16COLL |
TXCMD_IE_GOOD);
/* Now write the receive command register. */
bus_space_write_1(sc->sc_regt, sc->sc_regh, SEEQ_RXCMD, sc->sc_rxcmd);
/* Set up HPC ethernet DMA config */
if (sc->hpc_regs->revision == 3) {
reg = bus_space_read_4(sc->sc_hpct, sc->sc_hpch,
sc->hpc_regs->enetr_dmacfg);
bus_space_write_4(sc->sc_hpct, sc->sc_hpch,
sc->hpc_regs->enetr_dmacfg,
reg | ENETR_DMACFG_FIX_RXDC |
ENETR_DMACFG_FIX_INTR |
ENETR_DMACFG_FIX_EOP);
}
/* Pass the start of the receive ring to the HPC */
bus_space_write_4(sc->sc_hpct, sc->sc_hpch, sc->hpc_regs->enetr_ndbp,
SQ_CDRXADDR(sc, 0));
/* And turn on the HPC ethernet receive channel */
bus_space_write_4(sc->sc_hpct, sc->sc_hpch, sc->hpc_regs->enetr_ctl,
sc->hpc_regs->enetr_ctl_active);
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
return 0;
}
static void
sq_set_filter(struct sq_softc *sc)
{
struct ethercom *ec = &sc->sc_ethercom;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
struct ether_multi *enm;
struct ether_multistep step;
/*
* Check for promiscuous mode. Also implies
* all-multicast.
*/
if (ifp->if_flags & IFF_PROMISC) {
sc->sc_rxcmd |= RXCMD_REC_ALL;
ifp->if_flags |= IFF_ALLMULTI;
return;
}
/*
* The 8003 has no hash table. If we have any multicast
* addresses on the list, enable reception of all multicast
* frames.
*
* XXX The 80c03 has a hash table. We should use it.
*/
ETHER_FIRST_MULTI(step, ec, enm);
if (enm == NULL) {
sc->sc_rxcmd &= ~RXCMD_REC_MASK;
sc->sc_rxcmd |= RXCMD_REC_BROAD;
ifp->if_flags &= ~IFF_ALLMULTI;
return;
}
sc->sc_rxcmd |= RXCMD_REC_MULTI;
ifp->if_flags |= IFF_ALLMULTI;
}
int
sq_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
{
int s, error = 0;
s = splnet();
error = ether_ioctl(ifp, cmd, data);
if (error == ENETRESET) {
/*
* Multicast list has changed; set the hardware filter
* accordingly.
*/
error = sq_init(ifp);
}
splx(s);
return (error);
}
void
sq_start(struct ifnet *ifp)
{
struct sq_softc *sc = ifp->if_softc;
u_int32_t status;
struct mbuf *m0, *m;
bus_dmamap_t dmamap;
int err, totlen, nexttx, firsttx, lasttx = -1, ofree, seg;
if ((ifp->if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING)
return;
/*
* Remember the previous number of free descriptors and
* the first descriptor we'll use.
*/
ofree = sc->sc_nfreetx;
firsttx = sc->sc_nexttx;
/*
* Loop through the send queue, setting up transmit descriptors
* until we drain the queue, or use up all available transmit
* descriptors.
*/
while (sc->sc_nfreetx != 0) {
/*
* Grab a packet off the queue.
*/
IFQ_POLL(&ifp->if_snd, m0);
if (m0 == NULL)
break;
m = NULL;
dmamap = sc->sc_txmap[sc->sc_nexttx];
/*
* Load the DMA map. If this fails, the packet either
* didn't fit in the alloted number of segments, or we were
* short on resources. In this case, we'll copy and try
* again.
* Also copy it if we need to pad, so that we are sure there
* is room for the pad buffer.
* XXX the right way of doing this is to use a static buffer
* for padding and adding it to the transmit descriptor (see
* sys/dev/pci/if_tl.c for example). We can't do this here yet
* because we can't send packets with more than one fragment.
*/
if (m0->m_pkthdr.len < ETHER_PAD_LEN ||
bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0,
BUS_DMA_NOWAIT) != 0) {
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == NULL) {
printf("%s: unable to allocate Tx mbuf\n",
sc->sc_dev.dv_xname);
break;
}
if (m0->m_pkthdr.len > MHLEN) {
MCLGET(m, M_DONTWAIT);
if ((m->m_flags & M_EXT) == 0) {
printf("%s: unable to allocate Tx "
"cluster\n", sc->sc_dev.dv_xname);
m_freem(m);
break;
}
}
m_copydata(m0, 0, m0->m_pkthdr.len, mtod(m, caddr_t));
if (m0->m_pkthdr.len < ETHER_PAD_LEN) {
memset(mtod(m, char *) + m0->m_pkthdr.len, 0,
ETHER_PAD_LEN - m0->m_pkthdr.len);
m->m_pkthdr.len = m->m_len = ETHER_PAD_LEN;
} else
m->m_pkthdr.len = m->m_len = m0->m_pkthdr.len;
if ((err = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap,
m, BUS_DMA_NOWAIT)) != 0) {
printf("%s: unable to load Tx buffer, "
"error = %d\n", sc->sc_dev.dv_xname, err);
break;
}
}
/*
* Ensure we have enough descriptors free to describe
* the packet.
*/
if (dmamap->dm_nsegs > sc->sc_nfreetx) {
/*
* Not enough free descriptors to transmit this
* packet. We haven't committed to anything yet,
* so just unload the DMA map, put the packet
* back on the queue, and punt. Notify the upper
* layer that there are no more slots left.
*
* XXX We could allocate an mbuf and copy, but
* XXX it is worth it?
*/
ifp->if_flags |= IFF_OACTIVE;
bus_dmamap_unload(sc->sc_dmat, dmamap);
if (m != NULL)
m_freem(m);
break;
}
IFQ_DEQUEUE(&ifp->if_snd, m0);
#if NBPFILTER > 0
/*
* Pass the packet to any BPF listeners.
*/
if (ifp->if_bpf)
bpf_mtap(ifp->if_bpf, m0);
#endif /* NBPFILTER > 0 */
if (m != NULL) {
m_freem(m0);
m0 = m;
}
/*
* WE ARE NOW COMMITTED TO TRANSMITTING THE PACKET.
*/
/* Sync the DMA map. */
bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize,
BUS_DMASYNC_PREWRITE);
/*
* Initialize the transmit descriptors.
*/
for (nexttx = sc->sc_nexttx, seg = 0, totlen = 0;
seg < dmamap->dm_nsegs;
seg++, nexttx = SQ_NEXTTX(nexttx)) {
if (sc->hpc_regs->revision == 3) {
sc->sc_txdesc[nexttx].hpc3_hdd_bufptr =
dmamap->dm_segs[seg].ds_addr;
sc->sc_txdesc[nexttx].hpc3_hdd_ctl =
dmamap->dm_segs[seg].ds_len;
} else {
sc->sc_txdesc[nexttx].hpc1_hdd_bufptr =
dmamap->dm_segs[seg].ds_addr;
sc->sc_txdesc[nexttx].hpc1_hdd_ctl =
dmamap->dm_segs[seg].ds_len;
}
sc->sc_txdesc[nexttx].hdd_descptr=
SQ_CDTXADDR(sc, SQ_NEXTTX(nexttx));
lasttx = nexttx;
totlen += dmamap->dm_segs[seg].ds_len;
}
/* Last descriptor gets end-of-packet */
KASSERT(lasttx != -1);
if (sc->hpc_regs->revision == 3)
sc->sc_txdesc[lasttx].hpc3_hdd_ctl |= HDD_CTL_EOPACKET;
else
sc->sc_txdesc[lasttx].hpc1_hdd_ctl |=
HPC1_HDD_CTL_EOPACKET;
SQ_DPRINTF(("%s: transmit %d-%d, len %d\n", sc->sc_dev.dv_xname,
sc->sc_nexttx, lasttx,
totlen));
if (ifp->if_flags & IFF_DEBUG) {
printf(" transmit chain:\n");
for (seg = sc->sc_nexttx;; seg = SQ_NEXTTX(seg)) {
printf(" descriptor %d:\n", seg);
printf(" hdd_bufptr: 0x%08x\n",
(sc->hpc_regs->revision == 3) ?
sc->sc_txdesc[seg].hpc3_hdd_bufptr :
sc->sc_txdesc[seg].hpc1_hdd_bufptr);
printf(" hdd_ctl: 0x%08x\n",
(sc->hpc_regs->revision == 3) ?
sc->sc_txdesc[seg].hpc3_hdd_ctl:
sc->sc_txdesc[seg].hpc1_hdd_ctl);
printf(" hdd_descptr: 0x%08x\n",
sc->sc_txdesc[seg].hdd_descptr);
if (seg == lasttx)
break;
}
}
/* Sync the descriptors we're using. */
SQ_CDTXSYNC(sc, sc->sc_nexttx, dmamap->dm_nsegs,
BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
/* Store a pointer to the packet so we can free it later */
sc->sc_txmbuf[sc->sc_nexttx] = m0;
/* Advance the tx pointer. */
sc->sc_nfreetx -= dmamap->dm_nsegs;
sc->sc_nexttx = nexttx;
}
/* All transmit descriptors used up, let upper layers know */
if (sc->sc_nfreetx == 0)
ifp->if_flags |= IFF_OACTIVE;
if (sc->sc_nfreetx != ofree) {
SQ_DPRINTF(("%s: %d packets enqueued, first %d, INTR on %d\n",
sc->sc_dev.dv_xname, lasttx - firsttx + 1,
firsttx, lasttx));
/*
* Cause a transmit interrupt to happen on the
* last packet we enqueued, mark it as the last
* descriptor.
*
* HDD_CTL_EOPACKET && HDD_CTL_INTR cause an
* interrupt.
*/
KASSERT(lasttx != -1);
if (sc->hpc_regs->revision == 3) {
sc->sc_txdesc[lasttx].hpc3_hdd_ctl |= HDD_CTL_INTR |
HDD_CTL_EOCHAIN;
} else {
sc->sc_txdesc[lasttx].hpc1_hdd_ctl |= HPC1_HDD_CTL_INTR;
sc->sc_txdesc[lasttx].hpc1_hdd_bufptr |=
HPC1_HDD_CTL_EOCHAIN;
}
SQ_CDTXSYNC(sc, lasttx, 1,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
/*
* There is a potential race condition here if the HPC
* DMA channel is active and we try and either update
* the 'next descriptor' pointer in the HPC PIO space
* or the 'next descriptor' pointer in a previous desc-
* riptor.
*
* To avoid this, if the channel is active, we rely on
* the transmit interrupt routine noticing that there
* are more packets to send and restarting the HPC DMA
* engine, rather than mucking with the DMA state here.
*/
status = bus_space_read_4(sc->sc_hpct, sc->sc_hpch,
sc->hpc_regs->enetx_ctl);
if ((status & sc->hpc_regs->enetx_ctl_active) != 0) {
SQ_TRACE(SQ_ADD_TO_DMA, firsttx, status,
sc->sc_nfreetx);
/* NB: hpc3_hdd_ctl is also hpc1_hdd_bufptr */
sc->sc_txdesc[SQ_PREVTX(firsttx)].hpc3_hdd_ctl &=
~HDD_CTL_EOCHAIN;
SQ_CDTXSYNC(sc, SQ_PREVTX(firsttx), 1,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
} else {
SQ_TRACE(SQ_START_DMA, firsttx, status, sc->sc_nfreetx);
bus_space_write_4(sc->sc_hpct, sc->sc_hpch,
sc->hpc_regs->enetx_ndbp, SQ_CDTXADDR(sc, firsttx));
if (sc->hpc_regs->revision != 3) {
bus_space_write_4(sc->sc_hpct, sc->sc_hpch,
HPC1_ENETX_CFXBP, SQ_CDTXADDR(sc, firsttx));
bus_space_write_4(sc->sc_hpct, sc->sc_hpch,
HPC1_ENETX_CBP, SQ_CDTXADDR(sc, firsttx));
}
/* Kick DMA channel into life */
bus_space_write_4(sc->sc_hpct, sc->sc_hpch,
sc->hpc_regs->enetx_ctl,
sc->hpc_regs->enetx_ctl_active);
}
/* Set a watchdog timer in case the chip flakes out. */
ifp->if_timer = 5;
}
}
void
sq_stop(struct ifnet *ifp, int disable)
{
int i;
struct sq_softc *sc = ifp->if_softc;
for (i =0; i < SQ_NTXDESC; i++) {
if (sc->sc_txmbuf[i] != NULL) {
bus_dmamap_unload(sc->sc_dmat, sc->sc_txmap[i]);
m_freem(sc->sc_txmbuf[i]);
sc->sc_txmbuf[i] = NULL;
}
}
/* Clear Seeq transmit/receive command registers */
bus_space_write_1(sc->sc_regt, sc->sc_regh, SEEQ_TXCMD, 0);
bus_space_write_1(sc->sc_regt, sc->sc_regh, SEEQ_RXCMD, 0);
sq_reset(sc);
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
ifp->if_timer = 0;
}
/* Device timeout/watchdog routine. */
void
sq_watchdog(struct ifnet *ifp)
{
u_int32_t status;
struct sq_softc *sc = ifp->if_softc;
status = bus_space_read_4(sc->sc_hpct, sc->sc_hpch,
sc->hpc_regs->enetx_ctl);
log(LOG_ERR, "%s: device timeout (prev %d, next %d, free %d, "
"status %08x)\n", sc->sc_dev.dv_xname, sc->sc_prevtx,
sc->sc_nexttx, sc->sc_nfreetx, status);
sq_trace_dump(sc);
memset(&sq_trace, 0, sizeof(sq_trace));
sq_trace_idx = 0;
++ifp->if_oerrors;
sq_init(ifp);
}
void sq_trace_dump(struct sq_softc* sc)
{
int i;
for(i = 0; i < sq_trace_idx; i++) {
printf("%s: [%d] action %d, buf %d, free %d, status %08x\n",
sc->sc_dev.dv_xname, i, sq_trace[i].action,
sq_trace[i].bufno, sq_trace[i].freebuf,
sq_trace[i].status);
}
}
static int
sq_intr(void * arg)
{
struct sq_softc *sc = arg;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
int handled = 0;
u_int32_t stat;
stat = bus_space_read_4(sc->sc_hpct, sc->sc_hpch,
sc->hpc_regs->enetr_reset);
if ((stat & 2) == 0) {
printf("%s: Unexpected interrupt!\n", sc->sc_dev.dv_xname);
return 0;
}
bus_space_write_4(sc->sc_hpct, sc->sc_hpch,
sc->hpc_regs->enetr_reset, (stat | 2));
/*
* If the interface isn't running, the interrupt couldn't
* possibly have come from us.
*/
if ((ifp->if_flags & IFF_RUNNING) == 0)
return 0;
sc->sq_intrcnt.ev_count++;
/* Always check for received packets */
if (sq_rxintr(sc) != 0)
handled++;
/* Only handle transmit interrupts if we actually sent something */
if (sc->sc_nfreetx < SQ_NTXDESC) {
sq_txintr(sc);
handled++;
}
#if NRND > 0
if (handled)
rnd_add_uint32(&sc->rnd_source, stat);
#endif
return (handled);
}
static int
sq_rxintr(struct sq_softc *sc)
{
int count = 0;
struct mbuf* m;
int i, framelen;
u_int8_t pktstat;
u_int32_t status;
u_int32_t ctl_reg;
int new_end, orig_end;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
for(i = sc->sc_nextrx;; i = SQ_NEXTRX(i)) {
SQ_CDRXSYNC(sc, i, BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
/* If this is a CPU-owned buffer, we're at the end of the list */
if (sc->hpc_regs->revision == 3)
ctl_reg = sc->sc_rxdesc[i].hpc3_hdd_ctl & HDD_CTL_OWN;
else
ctl_reg = sc->sc_rxdesc[i].hpc1_hdd_ctl &
HPC1_HDD_CTL_OWN;
if (ctl_reg) {
#if defined(SQ_DEBUG)
u_int32_t reg;
reg = bus_space_read_4(sc->sc_hpct, sc->sc_hpch,
sc->hpc_regs->enetr_ctl);
SQ_DPRINTF(("%s: rxintr: done at %d (ctl %08x)\n",
sc->sc_dev.dv_xname, i, reg));
#endif
break;
}
count++;
m = sc->sc_rxmbuf[i];
framelen = m->m_ext.ext_size - 3;
if (sc->hpc_regs->revision == 3)
framelen -=
HDD_CTL_BYTECNT(sc->sc_rxdesc[i].hpc3_hdd_ctl);
else
framelen -=
HPC1_HDD_CTL_BYTECNT(sc->sc_rxdesc[i].hpc1_hdd_ctl);
/* Now sync the actual packet data */
bus_dmamap_sync(sc->sc_dmat, sc->sc_rxmap[i], 0,
sc->sc_rxmap[i]->dm_mapsize, BUS_DMASYNC_POSTREAD);
pktstat = *((u_int8_t*)m->m_data + framelen + 2);
if ((pktstat & RXSTAT_GOOD) == 0) {
ifp->if_ierrors++;
if (pktstat & RXSTAT_OFLOW)
printf("%s: receive FIFO overflow\n",
sc->sc_dev.dv_xname);
bus_dmamap_sync(sc->sc_dmat, sc->sc_rxmap[i], 0,
sc->sc_rxmap[i]->dm_mapsize,
BUS_DMASYNC_PREREAD);
SQ_INIT_RXDESC(sc, i);
continue;
}
if (sq_add_rxbuf(sc, i) != 0) {
ifp->if_ierrors++;
bus_dmamap_sync(sc->sc_dmat, sc->sc_rxmap[i], 0,
sc->sc_rxmap[i]->dm_mapsize,
BUS_DMASYNC_PREREAD);
SQ_INIT_RXDESC(sc, i);
continue;
}
m->m_data += 2;
m->m_pkthdr.rcvif = ifp;
m->m_pkthdr.len = m->m_len = framelen;
ifp->if_ipackets++;
SQ_DPRINTF(("%s: sq_rxintr: buf %d len %d\n",
sc->sc_dev.dv_xname, i, framelen));
#if NBPFILTER > 0
if (ifp->if_bpf)
bpf_mtap(ifp->if_bpf, m);
#endif
(*ifp->if_input)(ifp, m);
}
/* If anything happened, move ring start/end pointers to new spot */
if (i != sc->sc_nextrx) {
/* NB: hpc3_hdd_ctl is also hpc1_hdd_bufptr */
new_end = SQ_PREVRX(i);
sc->sc_rxdesc[new_end].hpc3_hdd_ctl |= HDD_CTL_EOCHAIN;
SQ_CDRXSYNC(sc, new_end, BUS_DMASYNC_PREREAD |
BUS_DMASYNC_PREWRITE);
orig_end = SQ_PREVRX(sc->sc_nextrx);
sc->sc_rxdesc[orig_end].hpc3_hdd_ctl &= ~HDD_CTL_EOCHAIN;
SQ_CDRXSYNC(sc, orig_end, BUS_DMASYNC_PREREAD |
BUS_DMASYNC_PREWRITE);
sc->sc_nextrx = i;
}
status = bus_space_read_4(sc->sc_hpct, sc->sc_hpch,
sc->hpc_regs->enetr_ctl);
/* If receive channel is stopped, restart it... */
if ((status & sc->hpc_regs->enetr_ctl_active) == 0) {
/* Pass the start of the receive ring to the HPC */
bus_space_write_4(sc->sc_hpct, sc->sc_hpch,
sc->hpc_regs->enetr_ndbp, SQ_CDRXADDR(sc, sc->sc_nextrx));
/* And turn on the HPC ethernet receive channel */
bus_space_write_4(sc->sc_hpct, sc->sc_hpch,
sc->hpc_regs->enetr_ctl, sc->hpc_regs->enetr_ctl_active);
}
return count;
}
static int
sq_txintr(struct sq_softc *sc)
{
int i;
int shift = 0;
u_int32_t status;
u_int32_t hpc1_ready = 0;
u_int32_t hpc3_not_ready = 1;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
if (sc->hpc_regs->revision != 3)
shift = 16;
status = bus_space_read_4(sc->sc_hpct, sc->sc_hpch,
sc->hpc_regs->enetx_ctl) >> shift;
SQ_TRACE(SQ_TXINTR_ENTER, sc->sc_prevtx, status, sc->sc_nfreetx);
if ((status & ( (sc->hpc_regs->enetx_ctl_active >> shift) | TXSTAT_GOOD)) == 0) {
/* XXX */ printf("txstat: %x\n", status);
if (status & TXSTAT_COLL)
ifp->if_collisions++;
if (status & TXSTAT_UFLOW) {
printf("%s: transmit underflow\n", sc->sc_dev.dv_xname);
ifp->if_oerrors++;
}
if (status & TXSTAT_16COLL) {
printf("%s: max collisions reached\n", sc->sc_dev.dv_xname);
ifp->if_oerrors++;
ifp->if_collisions += 16;
}
}
i = sc->sc_prevtx;
while (sc->sc_nfreetx < SQ_NTXDESC) {
/*
* Check status first so we don't end up with a case of
* the buffer not being finished while the DMA channel
* has gone idle.
*/
status = bus_space_read_4(sc->sc_hpct, sc->sc_hpch,
sc->hpc_regs->enetx_ctl) >> shift;
SQ_CDTXSYNC(sc, i, sc->sc_txmap[i]->dm_nsegs,
BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
/*
* If not yet transmitted, try and start DMA engine again.
* HPC3 tags transmitted descriptors with XMITDONE whereas
* HPC1 will not halt before sending through EOCHAIN.
*/
if (sc->hpc_regs->revision == 3) {
hpc3_not_ready =
sc->sc_txdesc[i].hpc3_hdd_ctl & HDD_CTL_XMITDONE;
} else {
if (hpc1_ready)
hpc1_ready++;
else {
if (sc->sc_txdesc[i].hpc1_hdd_ctl &
HPC1_HDD_CTL_EOPACKET)
hpc1_ready = 1;
}
}
if (hpc3_not_ready == 0 || hpc1_ready == 2) {
if ((status & (sc->hpc_regs->enetx_ctl_active >> shift)) == 0) { // XXX
SQ_TRACE(SQ_RESTART_DMA, i, status,
sc->sc_nfreetx);
bus_space_write_4(sc->sc_hpct, sc->sc_hpch,
sc->hpc_regs->enetx_ndbp, SQ_CDTXADDR(sc, i));
if (sc->hpc_regs->revision != 3) {
bus_space_write_4(sc->sc_hpct, sc->sc_hpch,
HPC1_ENETX_CFXBP, SQ_CDTXADDR(sc, i));
bus_space_write_4(sc->sc_hpct, sc->sc_hpch,
HPC1_ENETX_CBP, SQ_CDTXADDR(sc, i));
}
/* Kick DMA channel into life */
bus_space_write_4(sc->sc_hpct, sc->sc_hpch,
sc->hpc_regs->enetx_ctl,
sc->hpc_regs->enetx_ctl_active);
/*
* Set a watchdog timer in case the chip
* flakes out.
*/
ifp->if_timer = 5;
} else {
SQ_TRACE(SQ_TXINTR_BUSY, i, status,
sc->sc_nfreetx);
}
break;
}
/* Sync the packet data, unload DMA map, free mbuf */
bus_dmamap_sync(sc->sc_dmat, sc->sc_txmap[i], 0,
sc->sc_txmap[i]->dm_mapsize,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->sc_dmat, sc->sc_txmap[i]);
m_freem(sc->sc_txmbuf[i]);
sc->sc_txmbuf[i] = NULL;
ifp->if_opackets++;
sc->sc_nfreetx++;
SQ_TRACE(SQ_DONE_DMA, i, status, sc->sc_nfreetx);
i = SQ_NEXTTX(i);
}
/* prevtx now points to next xmit packet not yet finished */
sc->sc_prevtx = i;
/* If we have buffers free, let upper layers know */
if (sc->sc_nfreetx > 0)
ifp->if_flags &= ~IFF_OACTIVE;
/* If all packets have left the coop, cancel watchdog */
if (sc->sc_nfreetx == SQ_NTXDESC)
ifp->if_timer = 0;
SQ_TRACE(SQ_TXINTR_EXIT, sc->sc_prevtx, status, sc->sc_nfreetx);
sq_start(ifp);
return 1;
}
void
sq_reset(struct sq_softc *sc)
{
/* Stop HPC dma channels */
bus_space_write_4(sc->sc_hpct, sc->sc_hpch, sc->hpc_regs->enetr_ctl, 0);
bus_space_write_4(sc->sc_hpct, sc->sc_hpch, sc->hpc_regs->enetx_ctl, 0);
bus_space_write_4(sc->sc_hpct, sc->sc_hpch, sc->hpc_regs->enetr_reset, 3);
delay(20);
bus_space_write_4(sc->sc_hpct, sc->sc_hpch, sc->hpc_regs->enetr_reset, 0);
}
/* sq_add_rxbuf: Add a receive buffer to the indicated descriptor. */
int
sq_add_rxbuf(struct sq_softc *sc, int idx)
{
int err;
struct mbuf *m;
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == NULL)
return (ENOBUFS);
MCLGET(m, M_DONTWAIT);
if ((m->m_flags & M_EXT) == 0) {
m_freem(m);
return (ENOBUFS);
}
if (sc->sc_rxmbuf[idx] != NULL)
bus_dmamap_unload(sc->sc_dmat, sc->sc_rxmap[idx]);
sc->sc_rxmbuf[idx] = m;
if ((err = bus_dmamap_load(sc->sc_dmat, sc->sc_rxmap[idx],
m->m_ext.ext_buf, m->m_ext.ext_size,
NULL, BUS_DMA_NOWAIT)) != 0) {
printf("%s: can't load rx DMA map %d, error = %d\n",
sc->sc_dev.dv_xname, idx, err);
panic("sq_add_rxbuf"); /* XXX */
}
bus_dmamap_sync(sc->sc_dmat, sc->sc_rxmap[idx], 0,
sc->sc_rxmap[idx]->dm_mapsize, BUS_DMASYNC_PREREAD);
SQ_INIT_RXDESC(sc, idx);
return 0;
}
void
sq_dump_buffer(u_int32_t addr, u_int32_t len)
{
u_int i;
u_char* physaddr = (char*) MIPS_PHYS_TO_KSEG1((caddr_t)addr);
if (len == 0)
return;
printf("%p: ", physaddr);
for(i = 0; i < len; i++) {
printf("%02x ", *(physaddr + i) & 0xff);
if ((i % 16) == 15 && i != len - 1)
printf("\n%p: ", physaddr + i);
}
printf("\n");
}
void
enaddr_aton(const char* str, u_int8_t* eaddr)
{
int i;
char c;
for(i = 0; i < ETHER_ADDR_LEN; i++) {
if (*str == ':')
str++;
c = *str++;
if (isdigit(c)) {
eaddr[i] = (c - '0');
} else if (isxdigit(c)) {
eaddr[i] = (toupper(c) + 10 - 'A');
}
c = *str++;
if (isdigit(c)) {
eaddr[i] = (eaddr[i] << 4) | (c - '0');
} else if (isxdigit(c)) {
eaddr[i] = (eaddr[i] << 4) | (toupper(c) + 10 - 'A');
}
}
}
Reference in New Issue View Git Blame Copy Permalink