150 lines
4.5 KiB
Groff
150 lines
4.5 KiB
Groff
.\" $NetBSD: ipmon.8,v 1.4 2000/04/12 16:42:49 kim Exp $
|
|
.\"
|
|
.TH ipmon 8
|
|
.SH NAME
|
|
ipmon \- monitors /dev/ipl for logged packets
|
|
.SH SYNOPSIS
|
|
.B ipmon
|
|
[
|
|
.B \-aFhnstvxX
|
|
] [
|
|
.B "\-o [NSI]"
|
|
] [
|
|
.B "\-O [NSI]"
|
|
] [
|
|
.B "\-N <device>"
|
|
] [
|
|
.B "\-S <device>"
|
|
] [
|
|
.B "\-f <device>"
|
|
] [
|
|
.B <filename>
|
|
]
|
|
.SH DESCRIPTION
|
|
.LP
|
|
\fBipmon\fP opens \fB/dev/ipl\fP for reading and awaits data to be saved from
|
|
the packet filter. The binary data read from the device is reprinted in
|
|
human readable for, however, IP#'s are not mapped back to hostnames, nor are
|
|
ports mapped back to service names. The output goes to standard output by
|
|
default or a filename, if given on the command line. Should the \fB\-s\fP
|
|
option be used, output is instead sent to \fBsyslogd(8)\fP. Messages sent
|
|
via syslog have the day, month and year removed from the message, but the
|
|
time (including microseconds), as recorded in the log, is still included.
|
|
.LP
|
|
Messages generated by ipmon consist of whitespace separated fields.
|
|
Fields common to all messages are:
|
|
.LP
|
|
1. The date of packet receipt. This is suppressed when the message is
|
|
sent to syslog.
|
|
.LP
|
|
2. The time of packet receipt. This is in the form HH:MM:SS.F, for hours,
|
|
minutes seconds, and fractions of a second (which can be several digits
|
|
long).
|
|
.LP
|
|
3. The name of the interface the packet was processed on, e.g., \fBwe1\fP.
|
|
.LP
|
|
4. The group and rule number of the rule, e.g., \fB@0:17\fP. These can be
|
|
viewed with \fBipfstat -n\fP.
|
|
.LP
|
|
5. The action: \fBp\fP for passed or \fBb\fP for blocked.
|
|
.LP
|
|
6. The addresses.
|
|
This is actually three fields: the source address and port
|
|
(separted by a comma), the \fB->\fP symbol, and the destination address
|
|
and port. E.g.: \fB209.53.17.22,80 -> 198.73.220.17,1722\fP.
|
|
.LP
|
|
7. \fBPR\fP followed by the protocol name or number, e.g., \fBPR tcp\fP.
|
|
.LP
|
|
8. \fBlen\fP followed by the header length and total length of the packet,
|
|
e.g., \fBlen 20 40\fP.
|
|
.LP
|
|
If the packet is a TCP packet, there will be an additional field starting
|
|
with a hyphen followed by letters corresponding to any flags that were set.
|
|
See the ipf.conf manual page for a list of letters and their flags.
|
|
.LP
|
|
If the packet is an ICMP packet, there will be two fields at the end,
|
|
the first always being `icmp', and the next being the ICMP message and
|
|
submessage type, separated by a slash, e.g., \fBicmp 3/3\fP for a port
|
|
unreachable message.
|
|
.LP
|
|
In order for \fBipmon\fP to properly work, the kernel option
|
|
\fBIPFILTER_LOG\fP must be turned on in your kernel. Please see
|
|
\fBoptions(4)\fP for more details.
|
|
.SH OPTIONS
|
|
.TP
|
|
.B \-a
|
|
Open all of the device logfiles for reading log entries from. All entries
|
|
are displayed to the same output 'device' (stderr or syslog).
|
|
.TP
|
|
.B "\-f <device>"
|
|
specify an alternative device/file from which to read the log information
|
|
for normal IP Filter log records.
|
|
.TP
|
|
.B \-F
|
|
Flush the current packet log buffer. The number of bytes flushed is displayed,
|
|
even should the result be zero.
|
|
.TP
|
|
.B \-n
|
|
IP addresses and port numbers will be mapped, where possible, back into
|
|
hostnames and service names.
|
|
.TP
|
|
.B "\-N <device>"
|
|
Set the logfile to be opened for reading NAT log records from to <device>.
|
|
.TP
|
|
.B \-o
|
|
Specify which log files to actually read data from. N - NAT logfile,
|
|
S - State logfile, I - normal IP Filter logfile. The \fB-a\fP option is
|
|
equivalent to using \fB-o NSI\fP.
|
|
.TP
|
|
.B \-O
|
|
Specify which log files you do not wish to read from. This is most sensibly
|
|
used with the \fB-a\fP. Letters available as paramters to this are the same
|
|
as for \fB-o\fP.
|
|
.TP
|
|
.B \-s
|
|
Packet information read in will be sent through syslogd rather than
|
|
saved to a file. The default facility when compiled and installed is
|
|
\fBlocal0\fP. The following levels are used:
|
|
.IP
|
|
.B LOG_INFO
|
|
\- packets logged using the "log" keyword as the action rather
|
|
than pass or block.
|
|
.IP
|
|
.B LOG_NOTICE
|
|
\- packets logged which are also passed
|
|
.IP
|
|
.B LOG_WARNING
|
|
\- packets logged which are also blocked
|
|
.IP
|
|
.B LOG_ERR
|
|
\- packets which have been logged and which can be considered
|
|
"short".
|
|
.TP
|
|
.B "\-S <device>"
|
|
Set the logfile to be opened for reading state log records from to <device>.
|
|
.TP
|
|
.B \-t
|
|
read the input file/device in a manner akin to tail(1).
|
|
.TP
|
|
.B \-v
|
|
show tcp window, ack and sequence fields.
|
|
.TP
|
|
.B \-x
|
|
show the packet data in hex.
|
|
.TP
|
|
.B \-X
|
|
show the log header record data in hex.
|
|
.SH DIAGNOSTICS
|
|
\fBipmon\fP expects data that it reads to be consistent with how it should be
|
|
saved and will abort if it fails an assertion which detects an anomoly in the
|
|
recorded data.
|
|
.SH FILES
|
|
/dev/ipl
|
|
.br
|
|
/dev/ipnat
|
|
.br
|
|
/dev/ipstate
|
|
.SH SEE ALSO
|
|
ipl(4), ipf(8), ipfstat(8), ipnat(8)
|
|
.SH BUGS
|