2587 lines
65 KiB
C
2587 lines
65 KiB
C
/* $NetBSD: xd.c,v 1.31 2000/07/10 13:54:54 mrg Exp $ */
|
|
|
|
/*
|
|
*
|
|
* Copyright (c) 1995 Charles D. Cranor
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Charles D. Cranor.
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
*
|
|
* x d . c x y l o g i c s 7 5 3 / 7 0 5 3 v m e / s m d d r i v e r
|
|
*
|
|
* author: Chuck Cranor <chuck@ccrc.wustl.edu>
|
|
* started: 27-Feb-95
|
|
* references: [1] Xylogics Model 753 User's Manual
|
|
* part number: 166-753-001, Revision B, May 21, 1988.
|
|
* "Your Partner For Performance"
|
|
* [2] other NetBSD disk device drivers
|
|
*
|
|
* Special thanks go to Scott E. Campbell of Xylogics, Inc. for taking
|
|
* the time to answer some of my questions about the 753/7053.
|
|
*
|
|
* note: the 753 and the 7053 are programmed the same way, but are
|
|
* different sizes. the 753 is a 6U VME card, while the 7053 is a 9U
|
|
* VME card (found in many VME based suns).
|
|
*/
|
|
|
|
#undef XDC_DEBUG /* full debug */
|
|
#define XDC_DIAG /* extra sanity checks */
|
|
#if defined(DIAGNOSTIC) && !defined(XDC_DIAG)
|
|
#define XDC_DIAG /* link in with master DIAG option */
|
|
#endif
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/file.h>
|
|
#include <sys/stat.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/buf.h>
|
|
#include <sys/uio.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/device.h>
|
|
#include <sys/disklabel.h>
|
|
#include <sys/disk.h>
|
|
#include <sys/syslog.h>
|
|
#include <sys/dkbad.h>
|
|
#include <sys/conf.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/intr.h>
|
|
|
|
#if defined(__sparc__) || defined(sun3)
|
|
#include <dev/sun/disklabel.h>
|
|
#endif
|
|
|
|
#include <dev/vme/vmereg.h>
|
|
#include <dev/vme/vmevar.h>
|
|
|
|
#include <dev/vme/xdreg.h>
|
|
#include <dev/vme/xdvar.h>
|
|
#include <dev/vme/xio.h>
|
|
|
|
#include "locators.h"
|
|
|
|
/*
|
|
* macros
|
|
*/
|
|
|
|
/*
|
|
* XDC_TWAIT: add iorq "N" to tail of SC's wait queue
|
|
*/
|
|
#define XDC_TWAIT(SC, N) { \
|
|
(SC)->waitq[(SC)->waitend] = (N); \
|
|
(SC)->waitend = ((SC)->waitend + 1) % XDC_MAXIOPB; \
|
|
(SC)->nwait++; \
|
|
}
|
|
|
|
/*
|
|
* XDC_HWAIT: add iorq "N" to head of SC's wait queue
|
|
*/
|
|
#define XDC_HWAIT(SC, N) { \
|
|
(SC)->waithead = ((SC)->waithead == 0) ? \
|
|
(XDC_MAXIOPB - 1) : ((SC)->waithead - 1); \
|
|
(SC)->waitq[(SC)->waithead] = (N); \
|
|
(SC)->nwait++; \
|
|
}
|
|
|
|
/*
|
|
* XDC_GET_WAITER: gets the first request waiting on the waitq
|
|
* and removes it (so it can be submitted)
|
|
*/
|
|
#define XDC_GET_WAITER(XDCSC, RQ) { \
|
|
(RQ) = (XDCSC)->waitq[(XDCSC)->waithead]; \
|
|
(XDCSC)->waithead = ((XDCSC)->waithead + 1) % XDC_MAXIOPB; \
|
|
xdcsc->nwait--; \
|
|
}
|
|
|
|
/*
|
|
* XDC_FREE: add iorq "N" to SC's free list
|
|
*/
|
|
#define XDC_FREE(SC, N) { \
|
|
(SC)->freereq[(SC)->nfree++] = (N); \
|
|
(SC)->reqs[N].mode = 0; \
|
|
if ((SC)->nfree == 1) wakeup(&(SC)->nfree); \
|
|
}
|
|
|
|
|
|
/*
|
|
* XDC_RQALLOC: allocate an iorq off the free list (assume nfree > 0).
|
|
*/
|
|
#define XDC_RQALLOC(XDCSC) (XDCSC)->freereq[--((XDCSC)->nfree)]
|
|
|
|
/*
|
|
* XDC_GO: start iopb ADDR (DVMA addr in a u_long) on XDC
|
|
*/
|
|
#define XDC_GO(XDC, ADDR) { \
|
|
(XDC)->xdc_iopbaddr0 = ((ADDR) & 0xff); \
|
|
(ADDR) = ((ADDR) >> 8); \
|
|
(XDC)->xdc_iopbaddr1 = ((ADDR) & 0xff); \
|
|
(ADDR) = ((ADDR) >> 8); \
|
|
(XDC)->xdc_iopbaddr2 = ((ADDR) & 0xff); \
|
|
(ADDR) = ((ADDR) >> 8); \
|
|
(XDC)->xdc_iopbaddr3 = (ADDR); \
|
|
(XDC)->xdc_iopbamod = XDC_ADDRMOD; \
|
|
(XDC)->xdc_csr = XDC_ADDIOPB; /* go! */ \
|
|
}
|
|
|
|
/*
|
|
* XDC_WAIT: wait for XDC's csr "BITS" to come on in "TIME".
|
|
* LCV is a counter. If it goes to zero then we timed out.
|
|
*/
|
|
#define XDC_WAIT(XDC, LCV, TIME, BITS) { \
|
|
(LCV) = (TIME); \
|
|
while ((LCV) > 0) { \
|
|
if ((XDC)->xdc_csr & (BITS)) break; \
|
|
(LCV) = (LCV) - 1; \
|
|
DELAY(1); \
|
|
} \
|
|
}
|
|
|
|
/*
|
|
* XDC_DONE: don't need IORQ, get error code and free (done after xdc_cmd)
|
|
*/
|
|
#define XDC_DONE(SC,RQ,ER) { \
|
|
if ((RQ) == XD_ERR_FAIL) { \
|
|
(ER) = (RQ); \
|
|
} else { \
|
|
if ((SC)->ndone-- == XDC_SUBWAITLIM) \
|
|
wakeup(&(SC)->ndone); \
|
|
(ER) = (SC)->reqs[RQ].errno; \
|
|
XDC_FREE((SC), (RQ)); \
|
|
} \
|
|
}
|
|
|
|
/*
|
|
* XDC_ADVANCE: advance iorq's pointers by a number of sectors
|
|
*/
|
|
#define XDC_ADVANCE(IORQ, N) { \
|
|
if (N) { \
|
|
(IORQ)->sectcnt -= (N); \
|
|
(IORQ)->blockno += (N); \
|
|
(IORQ)->dbuf += ((N)*XDFM_BPS); \
|
|
} \
|
|
}
|
|
|
|
/*
|
|
* note - addresses you can sleep on:
|
|
* [1] & of xd_softc's "state" (waiting for a chance to attach a drive)
|
|
* [2] & of xdc_softc's "nfree" (waiting for a free iorq/iopb)
|
|
* [3] & of xdc_softc's "ndone" (waiting for number of done iorq/iopb's
|
|
* to drop below XDC_SUBWAITLIM)
|
|
* [4] & an iorq (waiting for an XD_SUB_WAIT iorq to finish)
|
|
*/
|
|
|
|
|
|
/*
|
|
* function prototypes
|
|
* "xdc_*" functions are internal, all others are external interfaces
|
|
*/
|
|
|
|
extern int pil_to_vme[]; /* from obio.c */
|
|
|
|
/* internals */
|
|
int xdc_cmd __P((struct xdc_softc *, int, int, int, int, int, char *, int));
|
|
char *xdc_e2str __P((int));
|
|
int xdc_error __P((struct xdc_softc *, struct xd_iorq *,
|
|
struct xd_iopb *, int, int));
|
|
int xdc_ioctlcmd __P((struct xd_softc *, dev_t dev, struct xd_iocmd *));
|
|
void xdc_perror __P((struct xd_iorq *, struct xd_iopb *, int));
|
|
int xdc_piodriver __P((struct xdc_softc *, int, int));
|
|
int xdc_remove_iorq __P((struct xdc_softc *));
|
|
int xdc_reset __P((struct xdc_softc *, int, int, int, struct xd_softc *));
|
|
inline void xdc_rqinit __P((struct xd_iorq *, struct xdc_softc *,
|
|
struct xd_softc *, int, u_long, int,
|
|
caddr_t, struct buf *));
|
|
void xdc_rqtopb __P((struct xd_iorq *, struct xd_iopb *, int, int));
|
|
void xdc_start __P((struct xdc_softc *, int));
|
|
int xdc_startbuf __P((struct xdc_softc *, struct xd_softc *, struct buf *));
|
|
int xdc_submit_iorq __P((struct xdc_softc *, int, int));
|
|
void xdc_tick __P((void *));
|
|
void xdc_xdreset __P((struct xdc_softc *, struct xd_softc *));
|
|
int xd_dmamem_alloc(bus_dma_tag_t, bus_dmamap_t, bus_dma_segment_t *,
|
|
int *, bus_size_t, caddr_t *, bus_addr_t *);
|
|
void xd_dmamem_free(bus_dma_tag_t, bus_dmamap_t, bus_dma_segment_t *,
|
|
int, bus_size_t, caddr_t);
|
|
|
|
|
|
/* machine interrupt hook */
|
|
int xdcintr __P((void *));
|
|
|
|
/* autoconf */
|
|
int xdcmatch __P((struct device *, struct cfdata *, void *));
|
|
void xdcattach __P((struct device *, struct device *, void *));
|
|
int xdmatch __P((struct device *, struct cfdata *, void *));
|
|
void xdattach __P((struct device *, struct device *, void *));
|
|
static int xdc_probe __P((void *, bus_space_tag_t, bus_space_handle_t));
|
|
|
|
static void xddummystrat __P((struct buf *));
|
|
int xdgetdisklabel __P((struct xd_softc *, void *));
|
|
|
|
bdev_decl(xd);
|
|
cdev_decl(xd);
|
|
|
|
/* XXX - think about this more.. xd_machdep? */
|
|
void xdc_md_setup __P((void));
|
|
int XDC_DELAY;
|
|
|
|
#if defined(__sparc__)
|
|
#include <sparc/sparc/vaddrs.h>
|
|
#include <sparc/sparc/cpuvar.h>
|
|
void xdc_md_setup()
|
|
{
|
|
if (CPU_ISSUN4 && cpuinfo.cpu_type == CPUTYP_4_300)
|
|
XDC_DELAY = XDC_DELAY_4_300;
|
|
else
|
|
XDC_DELAY = XDC_DELAY_SPARC;
|
|
}
|
|
#elif defined(sun3)
|
|
void xdc_md_setup()
|
|
{
|
|
XDC_DELAY = XDC_DELAY_SUN3;
|
|
}
|
|
#else
|
|
void xdc_md_setup()
|
|
{
|
|
XDC_DELAY = 0;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* cfattach's: device driver interface to autoconfig
|
|
*/
|
|
|
|
struct cfattach xdc_ca = {
|
|
sizeof(struct xdc_softc), xdcmatch, xdcattach
|
|
};
|
|
|
|
|
|
struct cfattach xd_ca = {
|
|
sizeof(struct xd_softc), xdmatch, xdattach
|
|
};
|
|
|
|
extern struct cfdriver xd_cd;
|
|
|
|
struct xdc_attach_args { /* this is the "aux" args to xdattach */
|
|
int driveno; /* unit number */
|
|
int fullmode; /* submit mode */
|
|
int booting; /* are we booting or not? */
|
|
};
|
|
|
|
/*
|
|
* dkdriver
|
|
*/
|
|
|
|
struct dkdriver xddkdriver = {xdstrategy};
|
|
|
|
/*
|
|
* start: disk label fix code (XXX)
|
|
*/
|
|
|
|
static void *xd_labeldata;
|
|
|
|
static void
|
|
xddummystrat(bp)
|
|
struct buf *bp;
|
|
{
|
|
if (bp->b_bcount != XDFM_BPS)
|
|
panic("xddummystrat");
|
|
bcopy(xd_labeldata, bp->b_data, XDFM_BPS);
|
|
bp->b_flags |= B_DONE;
|
|
bp->b_flags &= ~B_BUSY;
|
|
}
|
|
|
|
int
|
|
xdgetdisklabel(xd, b)
|
|
struct xd_softc *xd;
|
|
void *b;
|
|
{
|
|
char *err;
|
|
#if defined(__sparc__) || defined(sun3)
|
|
struct sun_disklabel *sdl;
|
|
#endif
|
|
|
|
/* We already have the label data in `b'; setup for dummy strategy */
|
|
xd_labeldata = b;
|
|
|
|
/* Required parameter for readdisklabel() */
|
|
xd->sc_dk.dk_label->d_secsize = XDFM_BPS;
|
|
|
|
err = readdisklabel(MAKEDISKDEV(0, xd->sc_dev.dv_unit, RAW_PART),
|
|
xddummystrat,
|
|
xd->sc_dk.dk_label, xd->sc_dk.dk_cpulabel);
|
|
if (err) {
|
|
printf("%s: %s\n", xd->sc_dev.dv_xname, err);
|
|
return(XD_ERR_FAIL);
|
|
}
|
|
|
|
#if defined(__sparc__) || defined(sun3)
|
|
/* Ok, we have the label; fill in `pcyl' if there's SunOS magic */
|
|
sdl = (struct sun_disklabel *)xd->sc_dk.dk_cpulabel->cd_block;
|
|
if (sdl->sl_magic == SUN_DKMAGIC) {
|
|
xd->pcyl = sdl->sl_pcylinders;
|
|
} else
|
|
#endif
|
|
{
|
|
printf("%s: WARNING: no `pcyl' in disk label.\n",
|
|
xd->sc_dev.dv_xname);
|
|
xd->pcyl = xd->sc_dk.dk_label->d_ncylinders +
|
|
xd->sc_dk.dk_label->d_acylinders;
|
|
printf("%s: WARNING: guessing pcyl=%d (ncyl+acyl)\n",
|
|
xd->sc_dev.dv_xname, xd->pcyl);
|
|
}
|
|
|
|
xd->ncyl = xd->sc_dk.dk_label->d_ncylinders;
|
|
xd->acyl = xd->sc_dk.dk_label->d_acylinders;
|
|
xd->nhead = xd->sc_dk.dk_label->d_ntracks;
|
|
xd->nsect = xd->sc_dk.dk_label->d_nsectors;
|
|
xd->sectpercyl = xd->nhead * xd->nsect;
|
|
xd->sc_dk.dk_label->d_secsize = XDFM_BPS; /* not handled by
|
|
* sun->bsd */
|
|
return(XD_ERR_AOK);
|
|
}
|
|
|
|
/*
|
|
* end: disk label fix code (XXX)
|
|
*/
|
|
|
|
/*
|
|
* Shorthand for allocating, mapping and loading a DMA buffer
|
|
*/
|
|
int
|
|
xd_dmamem_alloc(tag, map, seg, nsegp, len, kvap, dmap)
|
|
bus_dma_tag_t tag;
|
|
bus_dmamap_t map;
|
|
bus_dma_segment_t *seg;
|
|
int *nsegp;
|
|
bus_size_t len;
|
|
caddr_t *kvap;
|
|
bus_addr_t *dmap;
|
|
{
|
|
int nseg;
|
|
int error;
|
|
|
|
if ((error = bus_dmamem_alloc(tag, len, 0, 0,
|
|
seg, 1, &nseg, BUS_DMA_NOWAIT)) != 0) {
|
|
return (error);
|
|
}
|
|
|
|
if ((error = bus_dmamap_load_raw(tag, map,
|
|
seg, nseg, len, BUS_DMA_NOWAIT)) != 0) {
|
|
bus_dmamem_free(tag, seg, nseg);
|
|
return (error);
|
|
}
|
|
|
|
if ((error = bus_dmamem_map(tag, seg, nseg,
|
|
len, kvap,
|
|
BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
|
|
bus_dmamap_unload(tag, map);
|
|
bus_dmamem_free(tag, seg, nseg);
|
|
return (error);
|
|
}
|
|
|
|
*dmap = map->dm_segs[0].ds_addr;
|
|
*nsegp = nseg;
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
xd_dmamem_free(tag, map, seg, nseg, len, kva)
|
|
bus_dma_tag_t tag;
|
|
bus_dmamap_t map;
|
|
bus_dma_segment_t *seg;
|
|
int nseg;
|
|
bus_size_t len;
|
|
caddr_t kva;
|
|
{
|
|
|
|
bus_dmamap_unload(tag, map);
|
|
bus_dmamem_unmap(tag, kva, len);
|
|
bus_dmamem_free(tag, seg, nseg);
|
|
}
|
|
|
|
|
|
/*
|
|
* a u t o c o n f i g f u n c t i o n s
|
|
*/
|
|
|
|
/*
|
|
* xdcmatch: determine if xdc is present or not. we do a
|
|
* soft reset to detect the xdc.
|
|
*/
|
|
|
|
int
|
|
xdc_probe(arg, tag, handle)
|
|
void *arg;
|
|
bus_space_tag_t tag;
|
|
bus_space_handle_t handle;
|
|
{
|
|
struct xdc *xdc = (void *)handle; /* XXX */
|
|
int del = 0;
|
|
|
|
xdc->xdc_csr = XDC_RESET;
|
|
XDC_WAIT(xdc, del, XDC_RESETUSEC, XDC_RESET);
|
|
return (del > 0 ? 0 : EIO);
|
|
}
|
|
|
|
int xdcmatch(parent, cf, aux)
|
|
struct device *parent;
|
|
struct cfdata *cf;
|
|
void *aux;
|
|
{
|
|
struct vme_attach_args *va = aux;
|
|
vme_chipset_tag_t ct = va->va_vct;
|
|
vme_am_t mod;
|
|
int error;
|
|
|
|
mod = VME_AM_A16 | VME_AM_MBO | VME_AM_SUPER | VME_AM_DATA;
|
|
if (vme_space_alloc(ct, va->r[0].offset, sizeof(struct xdc), mod))
|
|
return (0);
|
|
|
|
error = vme_probe(ct, va->r[0].offset, sizeof(struct xdc),
|
|
mod, VME_D32, xdc_probe, 0);
|
|
vme_space_free(va->va_vct, va->r[0].offset, sizeof(struct xdc), mod);
|
|
|
|
return (error == 0);
|
|
}
|
|
|
|
/*
|
|
* xdcattach: attach controller
|
|
*/
|
|
void
|
|
xdcattach(parent, self, aux)
|
|
struct device *parent, *self;
|
|
void *aux;
|
|
|
|
{
|
|
struct vme_attach_args *va = aux;
|
|
vme_chipset_tag_t ct = va->va_vct;
|
|
bus_space_tag_t bt;
|
|
bus_space_handle_t bh;
|
|
vme_intr_handle_t ih;
|
|
vme_am_t mod;
|
|
struct xdc_softc *xdc = (void *) self;
|
|
struct xdc_attach_args xa;
|
|
int lcv, rqno, error;
|
|
struct xd_iopb_ctrl *ctl;
|
|
bus_dma_segment_t seg;
|
|
int rseg;
|
|
vme_mapresc_t resc;
|
|
|
|
xdc_md_setup();
|
|
|
|
/* get addressing and intr level stuff from autoconfig and load it
|
|
* into our xdc_softc. */
|
|
|
|
xdc->dmatag = va->va_bdt;
|
|
mod = VME_AM_A16 | VME_AM_MBO | VME_AM_SUPER | VME_AM_DATA;
|
|
|
|
if (vme_space_alloc(ct, va->r[0].offset, sizeof(struct xdc), mod))
|
|
panic("xdc: vme alloc");
|
|
|
|
if (vme_space_map(ct, va->r[0].offset, sizeof(struct xdc),
|
|
mod, VME_D32, 0, &bt, &bh, &resc) != 0)
|
|
panic("xdc: vme_map");
|
|
|
|
xdc->xdc = (struct xdc *) bh; /* XXX */
|
|
xdc->ipl = va->ilevel;
|
|
xdc->vector = va->ivector;
|
|
|
|
for (lcv = 0; lcv < XDC_MAXDEV; lcv++)
|
|
xdc->sc_drives[lcv] = (struct xd_softc *) 0;
|
|
|
|
/*
|
|
* allocate and zero buffers
|
|
*
|
|
* note: we simplify the code by allocating the max number of iopbs and
|
|
* iorq's up front. thus, we avoid linked lists and the costs
|
|
* associated with them in exchange for wasting a little memory.
|
|
*/
|
|
|
|
/* Get DMA handle for misc. transfers */
|
|
if ((error = vme_dmamap_create(
|
|
ct, /* VME chip tag */
|
|
MAXPHYS, /* size */
|
|
VME_AM_A24, /* address modifier */
|
|
VME_D32, /* data size */
|
|
0, /* swap */
|
|
1, /* nsegments */
|
|
MAXPHYS, /* maxsegsz */
|
|
0, /* boundary */
|
|
BUS_DMA_NOWAIT,
|
|
&xdc->auxmap)) != 0) {
|
|
|
|
printf("%s: DMA buffer map create error %d\n",
|
|
xdc->sc_dev.dv_xname, error);
|
|
return;
|
|
}
|
|
|
|
|
|
/* Get DMA handle for mapping iorq descriptors */
|
|
if ((error = vme_dmamap_create(
|
|
ct, /* VME chip tag */
|
|
XDC_MAXIOPB * sizeof(struct xd_iopb),
|
|
VME_AM_A24, /* address modifier */
|
|
VME_D32, /* data size */
|
|
0, /* swap */
|
|
1, /* nsegments */
|
|
XDC_MAXIOPB * sizeof(struct xd_iopb),
|
|
0, /* boundary */
|
|
BUS_DMA_NOWAIT,
|
|
&xdc->iopmap)) != 0) {
|
|
|
|
printf("%s: DMA buffer map create error %d\n",
|
|
xdc->sc_dev.dv_xname, error);
|
|
return;
|
|
}
|
|
|
|
/* Get DMA buffer for iorq descriptors */
|
|
if ((error = xd_dmamem_alloc(xdc->dmatag, xdc->iopmap, &seg, &rseg,
|
|
XDC_MAXIOPB * sizeof(struct xd_iopb),
|
|
(caddr_t *)&xdc->iopbase,
|
|
(bus_addr_t *)&xdc->dvmaiopb)) != 0) {
|
|
printf("%s: DMA buffer alloc error %d\n",
|
|
xdc->sc_dev.dv_xname, error);
|
|
return;
|
|
}
|
|
|
|
bzero(xdc->iopbase, XDC_MAXIOPB * sizeof(struct xd_iopb));
|
|
|
|
xdc->reqs = (struct xd_iorq *)
|
|
malloc(XDC_MAXIOPB * sizeof(struct xd_iorq), M_DEVBUF, M_NOWAIT);
|
|
if (xdc->reqs == NULL)
|
|
panic("xdc malloc");
|
|
bzero(xdc->reqs, XDC_MAXIOPB * sizeof(struct xd_iorq));
|
|
|
|
/* init free list, iorq to iopb pointers, and non-zero fields in the
|
|
* iopb which never change. */
|
|
|
|
for (lcv = 0; lcv < XDC_MAXIOPB; lcv++) {
|
|
xdc->reqs[lcv].iopb = &xdc->iopbase[lcv];
|
|
xdc->reqs[lcv].dmaiopb = &xdc->dvmaiopb[lcv];
|
|
xdc->freereq[lcv] = lcv;
|
|
xdc->iopbase[lcv].fixd = 1; /* always the same */
|
|
xdc->iopbase[lcv].naddrmod = XDC_ADDRMOD; /* always the same */
|
|
xdc->iopbase[lcv].intr_vec = xdc->vector; /* always the same */
|
|
|
|
if ((error = vme_dmamap_create(
|
|
ct, /* VME chip tag */
|
|
MAXPHYS, /* size */
|
|
VME_AM_A24, /* address modifier */
|
|
VME_D32, /* data size */
|
|
0, /* swap */
|
|
1, /* nsegments */
|
|
MAXPHYS, /* maxsegsz */
|
|
0, /* boundary */
|
|
BUS_DMA_NOWAIT,
|
|
&xdc->reqs[lcv].dmamap)) != 0) {
|
|
|
|
printf("%s: DMA buffer map create error %d\n",
|
|
xdc->sc_dev.dv_xname, error);
|
|
return;
|
|
}
|
|
}
|
|
xdc->nfree = XDC_MAXIOPB;
|
|
xdc->nrun = 0;
|
|
xdc->waithead = xdc->waitend = xdc->nwait = 0;
|
|
xdc->ndone = 0;
|
|
|
|
/* init queue of waiting bufs */
|
|
|
|
BUFQ_INIT(&xdc->sc_wq);
|
|
callout_init(&xdc->sc_tick_ch);
|
|
|
|
/*
|
|
* section 7 of the manual tells us how to init the controller:
|
|
* - read controller parameters (6/0)
|
|
* - write controller parameters (5/0)
|
|
*/
|
|
|
|
/* read controller parameters and insure we have a 753/7053 */
|
|
|
|
rqno = xdc_cmd(xdc, XDCMD_RDP, XDFUN_CTL, 0, 0, 0, 0, XD_SUB_POLL);
|
|
if (rqno == XD_ERR_FAIL) {
|
|
printf(": couldn't read controller params\n");
|
|
return; /* shouldn't ever happen */
|
|
}
|
|
ctl = (struct xd_iopb_ctrl *) &xdc->iopbase[rqno];
|
|
if (ctl->ctype != XDCT_753) {
|
|
if (xdc->reqs[rqno].errno)
|
|
printf(": %s: ", xdc_e2str(xdc->reqs[rqno].errno));
|
|
printf(": doesn't identify as a 753/7053\n");
|
|
XDC_DONE(xdc, rqno, error);
|
|
return;
|
|
}
|
|
printf(": Xylogics 753/7053, PROM=0x%x.%02x.%02x\n",
|
|
ctl->eprom_partno, ctl->eprom_lvl, ctl->eprom_rev);
|
|
XDC_DONE(xdc, rqno, error);
|
|
|
|
/* now write controller parameters (xdc_cmd sets all params for us) */
|
|
|
|
rqno = xdc_cmd(xdc, XDCMD_WRP, XDFUN_CTL, 0, 0, 0, 0, XD_SUB_POLL);
|
|
XDC_DONE(xdc, rqno, error);
|
|
if (error) {
|
|
printf("%s: controller config error: %s\n",
|
|
xdc->sc_dev.dv_xname, xdc_e2str(error));
|
|
return;
|
|
}
|
|
|
|
/* link in interrupt with higher level software */
|
|
vme_intr_map(ct, va->ivector, va->ilevel, &ih);
|
|
vme_intr_establish(ct, ih, IPL_BIO, xdcintr, xdc);
|
|
evcnt_attach_dynamic(&xdc->sc_intrcnt, EVCNT_TYPE_INTR, NULL,
|
|
xdc->sc_dev.dv_xname, "intr");
|
|
|
|
|
|
/* now we must look for disks using autoconfig */
|
|
xa.fullmode = XD_SUB_POLL;
|
|
xa.booting = 1;
|
|
|
|
for (xa.driveno = 0; xa.driveno < XDC_MAXDEV; xa.driveno++)
|
|
(void) config_found(self, (void *) &xa, NULL);
|
|
|
|
/* start the watchdog clock */
|
|
callout_reset(&xdc->sc_tick_ch, XDC_TICKCNT, xdc_tick, xdc);
|
|
|
|
}
|
|
|
|
/*
|
|
* xdmatch: probe for disk.
|
|
*
|
|
* note: we almost always say disk is present. this allows us to
|
|
* spin up and configure a disk after the system is booted (we can
|
|
* call xdattach!).
|
|
*/
|
|
int
|
|
xdmatch(parent, cf, aux)
|
|
struct device *parent;
|
|
struct cfdata *cf;
|
|
void *aux;
|
|
{
|
|
struct xdc_attach_args *xa = aux;
|
|
|
|
/* looking for autoconf wildcard or exact match */
|
|
|
|
if (cf->cf_loc[XDCCF_DRIVE] != XDCCF_DRIVE_DEFAULT &&
|
|
cf->cf_loc[XDCCF_DRIVE] != xa->driveno)
|
|
return 0;
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
/*
|
|
* xdattach: attach a disk. this can be called from autoconf and also
|
|
* from xdopen/xdstrategy.
|
|
*/
|
|
void
|
|
xdattach(parent, self, aux)
|
|
struct device *parent, *self;
|
|
void *aux;
|
|
|
|
{
|
|
struct xd_softc *xd = (void *) self;
|
|
struct xdc_softc *xdc = (void *) parent;
|
|
struct xdc_attach_args *xa = aux;
|
|
int rqno, spt = 0, mb, blk, lcv, fmode, s = 0, newstate;
|
|
struct xd_iopb_drive *driopb;
|
|
struct dkbad *dkb;
|
|
int rseg, error;
|
|
bus_dma_segment_t seg;
|
|
caddr_t dmaddr;
|
|
caddr_t buf;
|
|
|
|
/*
|
|
* Always re-initialize the disk structure. We want statistics
|
|
* to start with a clean slate.
|
|
*/
|
|
bzero(&xd->sc_dk, sizeof(xd->sc_dk));
|
|
xd->sc_dk.dk_driver = &xddkdriver;
|
|
xd->sc_dk.dk_name = xd->sc_dev.dv_xname;
|
|
|
|
/* if booting, init the xd_softc */
|
|
|
|
if (xa->booting) {
|
|
xd->state = XD_DRIVE_UNKNOWN; /* to start */
|
|
xd->flags = 0;
|
|
xd->parent = xdc;
|
|
}
|
|
xd->xd_drive = xa->driveno;
|
|
fmode = xa->fullmode;
|
|
xdc->sc_drives[xa->driveno] = xd;
|
|
|
|
/* if not booting, make sure we are the only process in the attach for
|
|
* this drive. if locked out, sleep on it. */
|
|
|
|
if (!xa->booting) {
|
|
s = splbio();
|
|
while (xd->state == XD_DRIVE_ATTACHING) {
|
|
if (tsleep(&xd->state, PRIBIO, "xdattach", 0)) {
|
|
splx(s);
|
|
return;
|
|
}
|
|
}
|
|
printf("%s at %s",
|
|
xd->sc_dev.dv_xname, xd->parent->sc_dev.dv_xname);
|
|
}
|
|
|
|
/* we now have control */
|
|
xd->state = XD_DRIVE_ATTACHING;
|
|
newstate = XD_DRIVE_UNKNOWN;
|
|
|
|
buf = NULL;
|
|
if ((error = xd_dmamem_alloc(xdc->dmatag, xdc->auxmap, &seg, &rseg,
|
|
XDFM_BPS,
|
|
(caddr_t *)&buf,
|
|
(bus_addr_t *)&dmaddr)) != 0) {
|
|
printf("%s: DMA buffer alloc error %d\n",
|
|
xdc->sc_dev.dv_xname, error);
|
|
return;
|
|
}
|
|
|
|
/* first try and reset the drive */
|
|
|
|
rqno = xdc_cmd(xdc, XDCMD_RST, 0, xd->xd_drive, 0, 0, 0, fmode);
|
|
XDC_DONE(xdc, rqno, error);
|
|
if (error == XD_ERR_NRDY) {
|
|
printf(" drive %d: off-line\n", xa->driveno);
|
|
goto done;
|
|
}
|
|
if (error) {
|
|
printf(": ERROR 0x%02x (%s)\n", error, xdc_e2str(error));
|
|
goto done;
|
|
}
|
|
printf(" drive %d: ready\n", xa->driveno);
|
|
|
|
/* now set format parameters */
|
|
|
|
rqno = xdc_cmd(xdc, XDCMD_WRP, XDFUN_FMT, xd->xd_drive, 0, 0, 0, fmode);
|
|
XDC_DONE(xdc, rqno, error);
|
|
if (error) {
|
|
printf("%s: write format parameters failed: %s\n",
|
|
xd->sc_dev.dv_xname, xdc_e2str(error));
|
|
goto done;
|
|
}
|
|
|
|
/* get drive parameters */
|
|
rqno = xdc_cmd(xdc, XDCMD_RDP, XDFUN_DRV, xd->xd_drive, 0, 0, 0, fmode);
|
|
if (rqno != XD_ERR_FAIL) {
|
|
driopb = (struct xd_iopb_drive *) &xdc->iopbase[rqno];
|
|
spt = driopb->sectpertrk;
|
|
}
|
|
XDC_DONE(xdc, rqno, error);
|
|
if (error) {
|
|
printf("%s: read drive parameters failed: %s\n",
|
|
xd->sc_dev.dv_xname, xdc_e2str(error));
|
|
goto done;
|
|
}
|
|
|
|
/*
|
|
* now set drive parameters (to semi-bogus values) so we can read the
|
|
* disk label.
|
|
*/
|
|
xd->pcyl = xd->ncyl = 1;
|
|
xd->acyl = 0;
|
|
xd->nhead = 1;
|
|
xd->nsect = 1;
|
|
xd->sectpercyl = 1;
|
|
for (lcv = 0; lcv < 126; lcv++) /* init empty bad144 table */
|
|
xd->dkb.bt_bad[lcv].bt_cyl = xd->dkb.bt_bad[lcv].bt_trksec = 0xffff;
|
|
rqno = xdc_cmd(xdc, XDCMD_WRP, XDFUN_DRV, xd->xd_drive, 0, 0, 0, fmode);
|
|
XDC_DONE(xdc, rqno, error);
|
|
if (error) {
|
|
printf("%s: write drive parameters failed: %s\n",
|
|
xd->sc_dev.dv_xname, xdc_e2str(error));
|
|
goto done;
|
|
}
|
|
|
|
/* read disk label */
|
|
rqno = xdc_cmd(xdc, XDCMD_RD, 0, xd->xd_drive, 0, 1, dmaddr, fmode);
|
|
XDC_DONE(xdc, rqno, error);
|
|
if (error) {
|
|
printf("%s: reading disk label failed: %s\n",
|
|
xd->sc_dev.dv_xname, xdc_e2str(error));
|
|
goto done;
|
|
}
|
|
newstate = XD_DRIVE_NOLABEL;
|
|
|
|
xd->hw_spt = spt;
|
|
/* Attach the disk: must be before getdisklabel to malloc label */
|
|
disk_attach(&xd->sc_dk);
|
|
|
|
if (xdgetdisklabel(xd, buf) != XD_ERR_AOK)
|
|
goto done;
|
|
|
|
/* inform the user of what is up */
|
|
printf("%s: <%s>, pcyl %d, hw_spt %d\n", xd->sc_dev.dv_xname,
|
|
buf, xd->pcyl, spt);
|
|
mb = xd->ncyl * (xd->nhead * xd->nsect) / (1048576 / XDFM_BPS);
|
|
printf("%s: %dMB, %d cyl, %d head, %d sec, %d bytes/sec\n",
|
|
xd->sc_dev.dv_xname, mb, xd->ncyl, xd->nhead, xd->nsect,
|
|
XDFM_BPS);
|
|
|
|
/* now set the real drive parameters! */
|
|
|
|
rqno = xdc_cmd(xdc, XDCMD_WRP, XDFUN_DRV, xd->xd_drive, 0, 0, 0, fmode);
|
|
XDC_DONE(xdc, rqno, error);
|
|
if (error) {
|
|
printf("%s: write real drive parameters failed: %s\n",
|
|
xd->sc_dev.dv_xname, xdc_e2str(error));
|
|
goto done;
|
|
}
|
|
newstate = XD_DRIVE_ONLINE;
|
|
|
|
/*
|
|
* read bad144 table. this table resides on the first sector of the
|
|
* last track of the disk (i.e. second cyl of "acyl" area).
|
|
*/
|
|
|
|
blk = (xd->ncyl + xd->acyl - 1) * (xd->nhead * xd->nsect) + /* last cyl */
|
|
(xd->nhead - 1) * xd->nsect; /* last head */
|
|
rqno = xdc_cmd(xdc, XDCMD_RD, 0, xd->xd_drive, blk, 1, dmaddr, fmode);
|
|
XDC_DONE(xdc, rqno, error);
|
|
if (error) {
|
|
printf("%s: reading bad144 failed: %s\n",
|
|
xd->sc_dev.dv_xname, xdc_e2str(error));
|
|
goto done;
|
|
}
|
|
|
|
/* check dkbad for sanity */
|
|
dkb = (struct dkbad *) buf;
|
|
for (lcv = 0; lcv < 126; lcv++) {
|
|
if ((dkb->bt_bad[lcv].bt_cyl == 0xffff ||
|
|
dkb->bt_bad[lcv].bt_cyl == 0) &&
|
|
dkb->bt_bad[lcv].bt_trksec == 0xffff)
|
|
continue; /* blank */
|
|
if (dkb->bt_bad[lcv].bt_cyl >= xd->ncyl)
|
|
break;
|
|
if ((dkb->bt_bad[lcv].bt_trksec >> 8) >= xd->nhead)
|
|
break;
|
|
if ((dkb->bt_bad[lcv].bt_trksec & 0xff) >= xd->nsect)
|
|
break;
|
|
}
|
|
if (lcv != 126) {
|
|
printf("%s: warning: invalid bad144 sector!\n",
|
|
xd->sc_dev.dv_xname);
|
|
} else {
|
|
bcopy(buf, &xd->dkb, XDFM_BPS);
|
|
}
|
|
|
|
done:
|
|
if (buf != NULL) {
|
|
xd_dmamem_free(xdc->dmatag, xdc->auxmap,
|
|
&seg, rseg, XDFM_BPS, buf);
|
|
}
|
|
|
|
xd->state = newstate;
|
|
if (!xa->booting) {
|
|
wakeup(&xd->state);
|
|
splx(s);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* end of autoconfig functions
|
|
*/
|
|
|
|
/*
|
|
* { b , c } d e v s w f u n c t i o n s
|
|
*/
|
|
|
|
/*
|
|
* xdclose: close device
|
|
*/
|
|
int
|
|
xdclose(dev, flag, fmt, p)
|
|
dev_t dev;
|
|
int flag, fmt;
|
|
struct proc *p;
|
|
{
|
|
struct xd_softc *xd = xd_cd.cd_devs[DISKUNIT(dev)];
|
|
int part = DISKPART(dev);
|
|
|
|
/* clear mask bits */
|
|
|
|
switch (fmt) {
|
|
case S_IFCHR:
|
|
xd->sc_dk.dk_copenmask &= ~(1 << part);
|
|
break;
|
|
case S_IFBLK:
|
|
xd->sc_dk.dk_bopenmask &= ~(1 << part);
|
|
break;
|
|
}
|
|
xd->sc_dk.dk_openmask = xd->sc_dk.dk_copenmask | xd->sc_dk.dk_bopenmask;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* xddump: crash dump system
|
|
*/
|
|
int
|
|
xddump(dev, blkno, va, size)
|
|
dev_t dev;
|
|
daddr_t blkno;
|
|
caddr_t va;
|
|
size_t size;
|
|
{
|
|
int unit, part;
|
|
struct xd_softc *xd;
|
|
|
|
unit = DISKUNIT(dev);
|
|
if (unit >= xd_cd.cd_ndevs)
|
|
return ENXIO;
|
|
part = DISKPART(dev);
|
|
|
|
xd = xd_cd.cd_devs[unit];
|
|
|
|
printf("%s%c: crash dump not supported (yet)\n", xd->sc_dev.dv_xname,
|
|
'a' + part);
|
|
|
|
return ENXIO;
|
|
|
|
/* outline: globals: "dumplo" == sector number of partition to start
|
|
* dump at (convert to physical sector with partition table)
|
|
* "dumpsize" == size of dump in clicks "physmem" == size of physical
|
|
* memory (clicks, ctob() to get bytes) (normal case: dumpsize ==
|
|
* physmem)
|
|
*
|
|
* dump a copy of physical memory to the dump device starting at sector
|
|
* "dumplo" in the swap partition (make sure > 0). map in pages as
|
|
* we go. use polled I/O.
|
|
*
|
|
* XXX how to handle NON_CONTIG? */
|
|
|
|
}
|
|
|
|
/*
|
|
* xdioctl: ioctls on XD drives. based on ioctl's of other netbsd disks.
|
|
*/
|
|
int
|
|
xdioctl(dev, command, addr, flag, p)
|
|
dev_t dev;
|
|
u_long command;
|
|
caddr_t addr;
|
|
int flag;
|
|
struct proc *p;
|
|
|
|
{
|
|
struct xd_softc *xd;
|
|
struct xd_iocmd *xio;
|
|
int error, s, unit;
|
|
|
|
unit = DISKUNIT(dev);
|
|
|
|
if (unit >= xd_cd.cd_ndevs || (xd = xd_cd.cd_devs[unit]) == NULL)
|
|
return (ENXIO);
|
|
|
|
/* switch on ioctl type */
|
|
|
|
switch (command) {
|
|
case DIOCSBAD: /* set bad144 info */
|
|
if ((flag & FWRITE) == 0)
|
|
return EBADF;
|
|
s = splbio();
|
|
bcopy(addr, &xd->dkb, sizeof(xd->dkb));
|
|
splx(s);
|
|
return 0;
|
|
|
|
case DIOCGDINFO: /* get disk label */
|
|
bcopy(xd->sc_dk.dk_label, addr, sizeof(struct disklabel));
|
|
return 0;
|
|
|
|
case DIOCGPART: /* get partition info */
|
|
((struct partinfo *) addr)->disklab = xd->sc_dk.dk_label;
|
|
((struct partinfo *) addr)->part =
|
|
&xd->sc_dk.dk_label->d_partitions[DISKPART(dev)];
|
|
return 0;
|
|
|
|
case DIOCSDINFO: /* set disk label */
|
|
if ((flag & FWRITE) == 0)
|
|
return EBADF;
|
|
error = setdisklabel(xd->sc_dk.dk_label,
|
|
(struct disklabel *) addr, /* xd->sc_dk.dk_openmask : */ 0,
|
|
xd->sc_dk.dk_cpulabel);
|
|
if (error == 0) {
|
|
if (xd->state == XD_DRIVE_NOLABEL)
|
|
xd->state = XD_DRIVE_ONLINE;
|
|
}
|
|
return error;
|
|
|
|
case DIOCWLABEL: /* change write status of disk label */
|
|
if ((flag & FWRITE) == 0)
|
|
return EBADF;
|
|
if (*(int *) addr)
|
|
xd->flags |= XD_WLABEL;
|
|
else
|
|
xd->flags &= ~XD_WLABEL;
|
|
return 0;
|
|
|
|
case DIOCWDINFO: /* write disk label */
|
|
if ((flag & FWRITE) == 0)
|
|
return EBADF;
|
|
error = setdisklabel(xd->sc_dk.dk_label,
|
|
(struct disklabel *) addr, /* xd->sc_dk.dk_openmask : */ 0,
|
|
xd->sc_dk.dk_cpulabel);
|
|
if (error == 0) {
|
|
if (xd->state == XD_DRIVE_NOLABEL)
|
|
xd->state = XD_DRIVE_ONLINE;
|
|
|
|
/* Simulate opening partition 0 so write succeeds. */
|
|
xd->sc_dk.dk_openmask |= (1 << 0);
|
|
error = writedisklabel(MAKEDISKDEV(major(dev), DISKUNIT(dev), RAW_PART),
|
|
xdstrategy, xd->sc_dk.dk_label,
|
|
xd->sc_dk.dk_cpulabel);
|
|
xd->sc_dk.dk_openmask =
|
|
xd->sc_dk.dk_copenmask | xd->sc_dk.dk_bopenmask;
|
|
}
|
|
return error;
|
|
|
|
case DIOSXDCMD:
|
|
xio = (struct xd_iocmd *) addr;
|
|
if ((error = suser(p->p_ucred, &p->p_acflag)) != 0)
|
|
return (error);
|
|
return (xdc_ioctlcmd(xd, dev, xio));
|
|
|
|
default:
|
|
return ENOTTY;
|
|
}
|
|
}
|
|
/*
|
|
* xdopen: open drive
|
|
*/
|
|
|
|
int
|
|
xdopen(dev, flag, fmt, p)
|
|
dev_t dev;
|
|
int flag, fmt;
|
|
struct proc *p;
|
|
{
|
|
int unit, part;
|
|
struct xd_softc *xd;
|
|
struct xdc_attach_args xa;
|
|
|
|
/* first, could it be a valid target? */
|
|
|
|
unit = DISKUNIT(dev);
|
|
if (unit >= xd_cd.cd_ndevs || (xd = xd_cd.cd_devs[unit]) == NULL)
|
|
return (ENXIO);
|
|
part = DISKPART(dev);
|
|
|
|
/* do we need to attach the drive? */
|
|
|
|
if (xd->state == XD_DRIVE_UNKNOWN) {
|
|
xa.driveno = xd->xd_drive;
|
|
xa.fullmode = XD_SUB_WAIT;
|
|
xa.booting = 0;
|
|
xdattach((struct device *) xd->parent, (struct device *) xd, &xa);
|
|
if (xd->state == XD_DRIVE_UNKNOWN) {
|
|
return (EIO);
|
|
}
|
|
}
|
|
/* check for partition */
|
|
|
|
if (part != RAW_PART &&
|
|
(part >= xd->sc_dk.dk_label->d_npartitions ||
|
|
xd->sc_dk.dk_label->d_partitions[part].p_fstype == FS_UNUSED)) {
|
|
return (ENXIO);
|
|
}
|
|
/* set open masks */
|
|
|
|
switch (fmt) {
|
|
case S_IFCHR:
|
|
xd->sc_dk.dk_copenmask |= (1 << part);
|
|
break;
|
|
case S_IFBLK:
|
|
xd->sc_dk.dk_bopenmask |= (1 << part);
|
|
break;
|
|
}
|
|
xd->sc_dk.dk_openmask = xd->sc_dk.dk_copenmask | xd->sc_dk.dk_bopenmask;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
xdread(dev, uio, flags)
|
|
dev_t dev;
|
|
struct uio *uio;
|
|
int flags;
|
|
{
|
|
|
|
return (physio(xdstrategy, NULL, dev, B_READ, minphys, uio));
|
|
}
|
|
|
|
int
|
|
xdwrite(dev, uio, flags)
|
|
dev_t dev;
|
|
struct uio *uio;
|
|
int flags;
|
|
{
|
|
|
|
return (physio(xdstrategy, NULL, dev, B_WRITE, minphys, uio));
|
|
}
|
|
|
|
|
|
/*
|
|
* xdsize: return size of a partition for a dump
|
|
*/
|
|
|
|
int
|
|
xdsize(dev)
|
|
dev_t dev;
|
|
|
|
{
|
|
struct xd_softc *xdsc;
|
|
int unit, part, size, omask;
|
|
|
|
/* valid unit? */
|
|
unit = DISKUNIT(dev);
|
|
if (unit >= xd_cd.cd_ndevs || (xdsc = xd_cd.cd_devs[unit]) == NULL)
|
|
return (-1);
|
|
|
|
part = DISKPART(dev);
|
|
omask = xdsc->sc_dk.dk_openmask & (1 << part);
|
|
|
|
if (omask == 0 && xdopen(dev, 0, S_IFBLK, NULL) != 0)
|
|
return (-1);
|
|
|
|
/* do it */
|
|
if (xdsc->sc_dk.dk_label->d_partitions[part].p_fstype != FS_SWAP)
|
|
size = -1; /* only give valid size for swap partitions */
|
|
else
|
|
size = xdsc->sc_dk.dk_label->d_partitions[part].p_size *
|
|
(xdsc->sc_dk.dk_label->d_secsize / DEV_BSIZE);
|
|
if (omask == 0 && xdclose(dev, 0, S_IFBLK, NULL) != 0)
|
|
return (-1);
|
|
return (size);
|
|
}
|
|
/*
|
|
* xdstrategy: buffering system interface to xd.
|
|
*/
|
|
|
|
void
|
|
xdstrategy(bp)
|
|
struct buf *bp;
|
|
|
|
{
|
|
struct xd_softc *xd;
|
|
struct xdc_softc *parent;
|
|
int s, unit;
|
|
struct xdc_attach_args xa;
|
|
|
|
unit = DISKUNIT(bp->b_dev);
|
|
|
|
/* check for live device */
|
|
|
|
if (unit >= xd_cd.cd_ndevs || (xd = xd_cd.cd_devs[unit]) == 0 ||
|
|
bp->b_blkno < 0 ||
|
|
(bp->b_bcount % xd->sc_dk.dk_label->d_secsize) != 0) {
|
|
bp->b_error = EINVAL;
|
|
goto bad;
|
|
}
|
|
/* do we need to attach the drive? */
|
|
|
|
if (xd->state == XD_DRIVE_UNKNOWN) {
|
|
xa.driveno = xd->xd_drive;
|
|
xa.fullmode = XD_SUB_WAIT;
|
|
xa.booting = 0;
|
|
xdattach((struct device *)xd->parent, (struct device *)xd, &xa);
|
|
if (xd->state == XD_DRIVE_UNKNOWN) {
|
|
bp->b_error = EIO;
|
|
goto bad;
|
|
}
|
|
}
|
|
if (xd->state != XD_DRIVE_ONLINE && DISKPART(bp->b_dev) != RAW_PART) {
|
|
/* no I/O to unlabeled disks, unless raw partition */
|
|
bp->b_error = EIO;
|
|
goto bad;
|
|
}
|
|
/* short circuit zero length request */
|
|
|
|
if (bp->b_bcount == 0)
|
|
goto done;
|
|
|
|
/* check bounds with label (disksubr.c). Determine the size of the
|
|
* transfer, and make sure it is within the boundaries of the
|
|
* partition. Adjust transfer if needed, and signal errors or early
|
|
* completion. */
|
|
|
|
if (bounds_check_with_label(bp, xd->sc_dk.dk_label,
|
|
(xd->flags & XD_WLABEL) != 0) <= 0)
|
|
goto done;
|
|
|
|
/*
|
|
* now we know we have a valid buf structure that we need to do I/O
|
|
* on.
|
|
*
|
|
* note that we don't disksort because the controller has a sorting
|
|
* algorithm built into the hardware.
|
|
*/
|
|
|
|
s = splbio(); /* protect the queues */
|
|
|
|
/* first, give jobs in front of us a chance */
|
|
parent = xd->parent;
|
|
while (parent->nfree > 0 && BUFQ_FIRST(&parent->sc_wq) != NULL)
|
|
if (xdc_startbuf(parent, NULL, NULL) != XD_ERR_AOK)
|
|
break;
|
|
|
|
/* if there are no free iorq's, then we just queue and return. the
|
|
* buffs will get picked up later by xdcintr().
|
|
*/
|
|
|
|
if (parent->nfree == 0) {
|
|
BUFQ_INSERT_TAIL(&parent->sc_wq, bp);
|
|
splx(s);
|
|
return;
|
|
}
|
|
|
|
/* now we have free iopb's and we are at splbio... start 'em up */
|
|
if (xdc_startbuf(parent, xd, bp) != XD_ERR_AOK) {
|
|
return;
|
|
}
|
|
|
|
/* done! */
|
|
|
|
splx(s);
|
|
return;
|
|
|
|
bad: /* tells upper layers we have an error */
|
|
bp->b_flags |= B_ERROR;
|
|
done: /* tells upper layers we are done with this
|
|
* buf */
|
|
bp->b_resid = bp->b_bcount;
|
|
biodone(bp);
|
|
}
|
|
/*
|
|
* end of {b,c}devsw functions
|
|
*/
|
|
|
|
/*
|
|
* i n t e r r u p t f u n c t i o n
|
|
*
|
|
* xdcintr: hardware interrupt.
|
|
*/
|
|
int
|
|
xdcintr(v)
|
|
void *v;
|
|
|
|
{
|
|
struct xdc_softc *xdcsc = v;
|
|
|
|
/* kick the event counter */
|
|
|
|
xdcsc->sc_intrcnt.ev_count++;
|
|
|
|
/* remove as many done IOPBs as possible */
|
|
|
|
xdc_remove_iorq(xdcsc);
|
|
|
|
/* start any iorq's already waiting */
|
|
|
|
xdc_start(xdcsc, XDC_MAXIOPB);
|
|
|
|
/* fill up any remaining iorq's with queue'd buffers */
|
|
|
|
while (xdcsc->nfree > 0 && BUFQ_FIRST(&xdcsc->sc_wq) != NULL)
|
|
if (xdc_startbuf(xdcsc, NULL, NULL) != XD_ERR_AOK)
|
|
break;
|
|
|
|
return (1);
|
|
}
|
|
/*
|
|
* end of interrupt function
|
|
*/
|
|
|
|
/*
|
|
* i n t e r n a l f u n c t i o n s
|
|
*/
|
|
|
|
/*
|
|
* xdc_rqinit: fill out the fields of an I/O request
|
|
*/
|
|
|
|
inline void
|
|
xdc_rqinit(rq, xdc, xd, md, blk, cnt, db, bp)
|
|
struct xd_iorq *rq;
|
|
struct xdc_softc *xdc;
|
|
struct xd_softc *xd;
|
|
int md;
|
|
u_long blk;
|
|
int cnt;
|
|
caddr_t db;
|
|
struct buf *bp;
|
|
{
|
|
rq->xdc = xdc;
|
|
rq->xd = xd;
|
|
rq->ttl = XDC_MAXTTL + 10;
|
|
rq->mode = md;
|
|
rq->tries = rq->errno = rq->lasterror = 0;
|
|
rq->blockno = blk;
|
|
rq->sectcnt = cnt;
|
|
rq->dbuf = db;
|
|
rq->buf = bp;
|
|
}
|
|
/*
|
|
* xdc_rqtopb: load up an IOPB based on an iorq
|
|
*/
|
|
|
|
void
|
|
xdc_rqtopb(iorq, iopb, cmd, subfun)
|
|
struct xd_iorq *iorq;
|
|
struct xd_iopb *iopb;
|
|
int cmd, subfun;
|
|
|
|
{
|
|
u_long block, dp;
|
|
|
|
/* standard stuff */
|
|
|
|
iopb->errs = iopb->done = 0;
|
|
iopb->comm = cmd;
|
|
iopb->errno = iopb->status = 0;
|
|
iopb->subfun = subfun;
|
|
if (iorq->xd)
|
|
iopb->unit = iorq->xd->xd_drive;
|
|
else
|
|
iopb->unit = 0;
|
|
|
|
/* check for alternate IOPB format */
|
|
|
|
if (cmd == XDCMD_WRP) {
|
|
switch (subfun) {
|
|
case XDFUN_CTL:{
|
|
struct xd_iopb_ctrl *ctrl =
|
|
(struct xd_iopb_ctrl *) iopb;
|
|
iopb->lll = 0;
|
|
iopb->intl = (XD_STATE(iorq->mode) == XD_SUB_POLL)
|
|
? 0
|
|
: iorq->xdc->ipl;
|
|
ctrl->param_a = XDPA_TMOD | XDPA_DACF;
|
|
ctrl->param_b = XDPB_ROR | XDPB_TDT_3_2USEC;
|
|
ctrl->param_c = XDPC_OVS | XDPC_COP | XDPC_ASR |
|
|
XDPC_RBC | XDPC_ECC2;
|
|
ctrl->throttle = XDC_THROTTLE;
|
|
ctrl->delay = XDC_DELAY;
|
|
break;
|
|
}
|
|
case XDFUN_DRV:{
|
|
struct xd_iopb_drive *drv =
|
|
(struct xd_iopb_drive *)iopb;
|
|
/* we assume that the disk label has the right
|
|
* info */
|
|
if (XD_STATE(iorq->mode) == XD_SUB_POLL)
|
|
drv->dparam_ipl = (XDC_DPARAM << 3);
|
|
else
|
|
drv->dparam_ipl = (XDC_DPARAM << 3) |
|
|
iorq->xdc->ipl;
|
|
drv->maxsect = iorq->xd->nsect - 1;
|
|
drv->maxsector = drv->maxsect;
|
|
/* note: maxsector != maxsect only if you are
|
|
* doing cyl sparing */
|
|
drv->headoff = 0;
|
|
drv->maxcyl = iorq->xd->pcyl - 1;
|
|
drv->maxhead = iorq->xd->nhead - 1;
|
|
break;
|
|
}
|
|
case XDFUN_FMT:{
|
|
struct xd_iopb_format *form =
|
|
(struct xd_iopb_format *) iopb;
|
|
if (XD_STATE(iorq->mode) == XD_SUB_POLL)
|
|
form->interleave_ipl = (XDC_INTERLEAVE << 3);
|
|
else
|
|
form->interleave_ipl = (XDC_INTERLEAVE << 3) |
|
|
iorq->xdc->ipl;
|
|
form->field1 = XDFM_FIELD1;
|
|
form->field2 = XDFM_FIELD2;
|
|
form->field3 = XDFM_FIELD3;
|
|
form->field4 = XDFM_FIELD4;
|
|
form->bytespersec = XDFM_BPS;
|
|
form->field6 = XDFM_FIELD6;
|
|
form->field7 = XDFM_FIELD7;
|
|
break;
|
|
}
|
|
}
|
|
} else {
|
|
|
|
/* normal IOPB case (harmless to RDP command) */
|
|
|
|
iopb->lll = 0;
|
|
iopb->intl = (XD_STATE(iorq->mode) == XD_SUB_POLL)
|
|
? 0
|
|
: iorq->xdc->ipl;
|
|
iopb->sectcnt = iorq->sectcnt;
|
|
block = iorq->blockno;
|
|
if (iorq->xd == NULL || block == 0) {
|
|
iopb->sectno = iopb->headno = iopb->cylno = 0;
|
|
} else {
|
|
iopb->sectno = block % iorq->xd->nsect;
|
|
block = block / iorq->xd->nsect;
|
|
iopb->headno = block % iorq->xd->nhead;
|
|
block = block / iorq->xd->nhead;
|
|
iopb->cylno = block;
|
|
}
|
|
dp = (u_long) iorq->dbuf;
|
|
dp = iopb->daddr = (iorq->dbuf == NULL) ? 0 : dp;
|
|
iopb->addrmod = ((dp + (XDFM_BPS * iorq->sectcnt)) > 0x1000000)
|
|
? XDC_ADDRMOD32
|
|
: XDC_ADDRMOD;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* xdc_cmd: front end for POLL'd and WAIT'd commands. Returns rqno.
|
|
* If you've already got an IORQ, you can call submit directly (currently
|
|
* there is no need to do this). NORM requests are handled seperately.
|
|
*/
|
|
int
|
|
xdc_cmd(xdcsc, cmd, subfn, unit, block, scnt, dptr, fullmode)
|
|
struct xdc_softc *xdcsc;
|
|
int cmd, subfn, unit, block, scnt;
|
|
char *dptr;
|
|
int fullmode;
|
|
|
|
{
|
|
int rqno, submode = XD_STATE(fullmode), retry;
|
|
struct xd_iorq *iorq;
|
|
struct xd_iopb *iopb;
|
|
|
|
/* get iorq/iopb */
|
|
switch (submode) {
|
|
case XD_SUB_POLL:
|
|
while (xdcsc->nfree == 0) {
|
|
if (xdc_piodriver(xdcsc, 0, 1) != XD_ERR_AOK)
|
|
return (XD_ERR_FAIL);
|
|
}
|
|
break;
|
|
case XD_SUB_WAIT:
|
|
retry = 1;
|
|
while (retry) {
|
|
while (xdcsc->nfree == 0) {
|
|
if (tsleep(&xdcsc->nfree, PRIBIO, "xdnfree", 0))
|
|
return (XD_ERR_FAIL);
|
|
}
|
|
while (xdcsc->ndone > XDC_SUBWAITLIM) {
|
|
if (tsleep(&xdcsc->ndone, PRIBIO, "xdsubwait", 0))
|
|
return (XD_ERR_FAIL);
|
|
}
|
|
if (xdcsc->nfree)
|
|
retry = 0; /* got it */
|
|
}
|
|
break;
|
|
default:
|
|
return (XD_ERR_FAIL); /* illegal */
|
|
}
|
|
if (xdcsc->nfree == 0)
|
|
panic("xdcmd nfree");
|
|
rqno = XDC_RQALLOC(xdcsc);
|
|
iorq = &xdcsc->reqs[rqno];
|
|
iopb = iorq->iopb;
|
|
|
|
|
|
/* init iorq/iopb */
|
|
|
|
xdc_rqinit(iorq, xdcsc,
|
|
(unit == XDC_NOUNIT) ? NULL : xdcsc->sc_drives[unit],
|
|
fullmode, block, scnt, dptr, NULL);
|
|
|
|
/* load IOPB from iorq */
|
|
|
|
xdc_rqtopb(iorq, iopb, cmd, subfn);
|
|
|
|
/* submit it for processing */
|
|
|
|
xdc_submit_iorq(xdcsc, rqno, fullmode); /* error code will be in iorq */
|
|
|
|
return (rqno);
|
|
}
|
|
/*
|
|
* xdc_startbuf
|
|
* start a buffer running, assumes nfree > 0
|
|
*/
|
|
|
|
int
|
|
xdc_startbuf(xdcsc, xdsc, bp)
|
|
struct xdc_softc *xdcsc;
|
|
struct xd_softc *xdsc;
|
|
struct buf *bp;
|
|
|
|
{
|
|
int rqno, partno;
|
|
struct xd_iorq *iorq;
|
|
struct xd_iopb *iopb;
|
|
u_long block;
|
|
/* caddr_t dbuf;*/
|
|
int error;
|
|
|
|
if (!xdcsc->nfree)
|
|
panic("xdc_startbuf free");
|
|
rqno = XDC_RQALLOC(xdcsc);
|
|
iorq = &xdcsc->reqs[rqno];
|
|
iopb = iorq->iopb;
|
|
|
|
/* get buf */
|
|
|
|
if (bp == NULL) {
|
|
bp = BUFQ_FIRST(&xdcsc->sc_wq);
|
|
if (bp == NULL)
|
|
panic("xdc_startbuf bp");
|
|
BUFQ_REMOVE(&xdcsc->sc_wq, bp);
|
|
xdsc = xdcsc->sc_drives[DISKUNIT(bp->b_dev)];
|
|
}
|
|
partno = DISKPART(bp->b_dev);
|
|
#ifdef XDC_DEBUG
|
|
printf("xdc_startbuf: %s%c: %s block %d\n", xdsc->sc_dev.dv_xname,
|
|
'a' + partno, (bp->b_flags & B_READ) ? "read" : "write", bp->b_blkno);
|
|
printf("xdc_startbuf: b_bcount %d, b_data 0x%x\n",
|
|
bp->b_bcount, bp->b_data);
|
|
#endif
|
|
|
|
/*
|
|
* load request. we have to calculate the correct block number based
|
|
* on partition info.
|
|
*
|
|
* note that iorq points to the buffer as mapped into DVMA space,
|
|
* where as the bp->b_data points to its non-DVMA mapping.
|
|
*/
|
|
|
|
block = bp->b_blkno + ((partno == RAW_PART) ? 0 :
|
|
xdsc->sc_dk.dk_label->d_partitions[partno].p_offset);
|
|
|
|
error = bus_dmamap_load(xdcsc->dmatag, iorq->dmamap,
|
|
bp->b_data, bp->b_bcount, 0, BUS_DMA_NOWAIT);
|
|
if (error != 0) {
|
|
printf("%s: warning: cannot load DMA map\n",
|
|
xdcsc->sc_dev.dv_xname);
|
|
XDC_FREE(xdcsc, rqno);
|
|
BUFQ_INSERT_TAIL(&xdcsc->sc_wq, bp);
|
|
return (XD_ERR_FAIL); /* XXX: need some sort of
|
|
* call-back scheme here? */
|
|
}
|
|
bus_dmamap_sync(xdcsc->dmatag, iorq->dmamap, 0,
|
|
iorq->dmamap->dm_mapsize, (bp->b_flags & B_READ)
|
|
? BUS_DMASYNC_PREREAD
|
|
: BUS_DMASYNC_PREWRITE);
|
|
|
|
/* init iorq and load iopb from it */
|
|
xdc_rqinit(iorq, xdcsc, xdsc, XD_SUB_NORM | XD_MODE_VERBO, block,
|
|
bp->b_bcount / XDFM_BPS,
|
|
(caddr_t)iorq->dmamap->dm_segs[0].ds_addr,
|
|
bp);
|
|
|
|
xdc_rqtopb(iorq, iopb, (bp->b_flags & B_READ) ? XDCMD_RD : XDCMD_WR, 0);
|
|
|
|
/* Instrumentation. */
|
|
disk_busy(&xdsc->sc_dk);
|
|
|
|
/* now submit [note that xdc_submit_iorq can never fail on NORM reqs] */
|
|
|
|
xdc_submit_iorq(xdcsc, rqno, XD_SUB_NORM);
|
|
return (XD_ERR_AOK);
|
|
}
|
|
|
|
|
|
/*
|
|
* xdc_submit_iorq: submit an iorq for processing. returns XD_ERR_AOK
|
|
* if ok. if it fail returns an error code. type is XD_SUB_*.
|
|
*
|
|
* note: caller frees iorq in all cases except NORM
|
|
*
|
|
* return value:
|
|
* NORM: XD_AOK (req pending), XD_FAIL (couldn't submit request)
|
|
* WAIT: XD_AOK (success), <error-code> (failed)
|
|
* POLL: <same as WAIT>
|
|
* NOQ : <same as NORM>
|
|
*
|
|
* there are three sources for i/o requests:
|
|
* [1] xdstrategy: normal block I/O, using "struct buf" system.
|
|
* [2] autoconfig/crash dump: these are polled I/O requests, no interrupts.
|
|
* [3] open/ioctl: these are I/O requests done in the context of a process,
|
|
* and the process should block until they are done.
|
|
*
|
|
* software state is stored in the iorq structure. each iorq has an
|
|
* iopb structure. the hardware understands the iopb structure.
|
|
* every command must go through an iopb. a 7053 can only handle
|
|
* XDC_MAXIOPB (31) active iopbs at one time. iopbs are allocated in
|
|
* DVMA space at boot up time. what happens if we run out of iopb's?
|
|
* for i/o type [1], the buffers are queued at the "buff" layer and
|
|
* picked up later by the interrupt routine. for case [2] the
|
|
* programmed i/o driver is called with a special flag that says
|
|
* return when one iopb is free. for case [3] the process can sleep
|
|
* on the iorq free list until some iopbs are avaliable.
|
|
*/
|
|
|
|
|
|
int
|
|
xdc_submit_iorq(xdcsc, iorqno, type)
|
|
struct xdc_softc *xdcsc;
|
|
int iorqno;
|
|
int type;
|
|
|
|
{
|
|
u_long iopbaddr;
|
|
struct xd_iorq *iorq = &xdcsc->reqs[iorqno];
|
|
|
|
#ifdef XDC_DEBUG
|
|
printf("xdc_submit_iorq(%s, no=%d, type=%d)\n", xdcsc->sc_dev.dv_xname,
|
|
iorqno, type);
|
|
#endif
|
|
|
|
/* first check and see if controller is busy */
|
|
if (xdcsc->xdc->xdc_csr & XDC_ADDING) {
|
|
#ifdef XDC_DEBUG
|
|
printf("xdc_submit_iorq: XDC not ready (ADDING)\n");
|
|
#endif
|
|
if (type == XD_SUB_NOQ)
|
|
return (XD_ERR_FAIL); /* failed */
|
|
XDC_TWAIT(xdcsc, iorqno); /* put at end of waitq */
|
|
switch (type) {
|
|
case XD_SUB_NORM:
|
|
return XD_ERR_AOK; /* success */
|
|
case XD_SUB_WAIT:
|
|
while (iorq->iopb->done == 0) {
|
|
(void) tsleep(iorq, PRIBIO, "xdciorq", 0);
|
|
}
|
|
return (iorq->errno);
|
|
case XD_SUB_POLL:
|
|
return (xdc_piodriver(xdcsc, iorqno, 0));
|
|
default:
|
|
panic("xdc_submit_iorq adding");
|
|
}
|
|
}
|
|
#ifdef XDC_DEBUG
|
|
{
|
|
u_char *rio = (u_char *) iorq->iopb;
|
|
int sz = sizeof(struct xd_iopb), lcv;
|
|
printf("%s: aio #%d [",
|
|
xdcsc->sc_dev.dv_xname, iorq - xdcsc->reqs);
|
|
for (lcv = 0; lcv < sz; lcv++)
|
|
printf(" %02x", rio[lcv]);
|
|
printf("]\n");
|
|
}
|
|
#endif /* XDC_DEBUG */
|
|
|
|
/* controller not busy, start command */
|
|
iopbaddr = (u_long) iorq->dmaiopb;
|
|
XDC_GO(xdcsc->xdc, iopbaddr); /* go! */
|
|
xdcsc->nrun++;
|
|
/* command now running, wrap it up */
|
|
switch (type) {
|
|
case XD_SUB_NORM:
|
|
case XD_SUB_NOQ:
|
|
return (XD_ERR_AOK); /* success */
|
|
case XD_SUB_WAIT:
|
|
while (iorq->iopb->done == 0) {
|
|
(void) tsleep(iorq, PRIBIO, "xdciorq", 0);
|
|
}
|
|
return (iorq->errno);
|
|
case XD_SUB_POLL:
|
|
return (xdc_piodriver(xdcsc, iorqno, 0));
|
|
default:
|
|
panic("xdc_submit_iorq wrap up");
|
|
}
|
|
panic("xdc_submit_iorq");
|
|
return 0; /* not reached */
|
|
}
|
|
|
|
|
|
/*
|
|
* xdc_piodriver
|
|
*
|
|
* programmed i/o driver. this function takes over the computer
|
|
* and drains off all i/o requests. it returns the status of the iorq
|
|
* the caller is interesting in. if freeone is true, then it returns
|
|
* when there is a free iorq.
|
|
*/
|
|
int
|
|
xdc_piodriver(xdcsc, iorqno, freeone)
|
|
struct xdc_softc *xdcsc;
|
|
int iorqno;
|
|
int freeone;
|
|
|
|
{
|
|
int nreset = 0;
|
|
int retval = 0;
|
|
u_long count;
|
|
struct xdc *xdc = xdcsc->xdc;
|
|
#ifdef XDC_DEBUG
|
|
printf("xdc_piodriver(%s, %d, freeone=%d)\n", xdcsc->sc_dev.dv_xname,
|
|
iorqno, freeone);
|
|
#endif
|
|
|
|
while (xdcsc->nwait || xdcsc->nrun) {
|
|
#ifdef XDC_DEBUG
|
|
printf("xdc_piodriver: wait=%d, run=%d\n",
|
|
xdcsc->nwait, xdcsc->nrun);
|
|
#endif
|
|
XDC_WAIT(xdc, count, XDC_MAXTIME, (XDC_REMIOPB | XDC_F_ERROR));
|
|
#ifdef XDC_DEBUG
|
|
printf("xdc_piodriver: done wait with count = %d\n", count);
|
|
#endif
|
|
/* we expect some progress soon */
|
|
if (count == 0 && nreset >= 2) {
|
|
xdc_reset(xdcsc, 0, XD_RSET_ALL, XD_ERR_FAIL, 0);
|
|
#ifdef XDC_DEBUG
|
|
printf("xdc_piodriver: timeout\n");
|
|
#endif
|
|
return (XD_ERR_FAIL);
|
|
}
|
|
if (count == 0) {
|
|
if (xdc_reset(xdcsc, 0,
|
|
(nreset++ == 0) ? XD_RSET_NONE : iorqno,
|
|
XD_ERR_FAIL,
|
|
0) == XD_ERR_FAIL)
|
|
return (XD_ERR_FAIL); /* flushes all but POLL
|
|
* requests, resets */
|
|
continue;
|
|
}
|
|
xdc_remove_iorq(xdcsc); /* could resubmit request */
|
|
if (freeone) {
|
|
if (xdcsc->nrun < XDC_MAXIOPB) {
|
|
#ifdef XDC_DEBUG
|
|
printf("xdc_piodriver: done: one free\n");
|
|
#endif
|
|
return (XD_ERR_AOK);
|
|
}
|
|
continue; /* don't xdc_start */
|
|
}
|
|
xdc_start(xdcsc, XDC_MAXIOPB);
|
|
}
|
|
|
|
/* get return value */
|
|
|
|
retval = xdcsc->reqs[iorqno].errno;
|
|
|
|
#ifdef XDC_DEBUG
|
|
printf("xdc_piodriver: done, retval = 0x%x (%s)\n",
|
|
xdcsc->reqs[iorqno].errno, xdc_e2str(xdcsc->reqs[iorqno].errno));
|
|
#endif
|
|
|
|
/* now that we've drained everything, start up any bufs that have
|
|
* queued */
|
|
|
|
while (xdcsc->nfree > 0 && BUFQ_FIRST(&xdcsc->sc_wq) != NULL)
|
|
if (xdc_startbuf(xdcsc, NULL, NULL) != XD_ERR_AOK)
|
|
break;
|
|
|
|
return (retval);
|
|
}
|
|
|
|
/*
|
|
* xdc_reset: reset one drive. NOTE: assumes xdc was just reset.
|
|
* we steal iopb[0] for this, but we put it back when we are done.
|
|
*/
|
|
void
|
|
xdc_xdreset(xdcsc, xdsc)
|
|
struct xdc_softc *xdcsc;
|
|
struct xd_softc *xdsc;
|
|
|
|
{
|
|
struct xd_iopb tmpiopb;
|
|
u_long addr;
|
|
int del;
|
|
bcopy(xdcsc->iopbase, &tmpiopb, sizeof(tmpiopb));
|
|
bzero(xdcsc->iopbase, sizeof(tmpiopb));
|
|
xdcsc->iopbase->comm = XDCMD_RST;
|
|
xdcsc->iopbase->unit = xdsc->xd_drive;
|
|
addr = (u_long) xdcsc->dvmaiopb;
|
|
XDC_GO(xdcsc->xdc, addr); /* go! */
|
|
XDC_WAIT(xdcsc->xdc, del, XDC_RESETUSEC, XDC_REMIOPB);
|
|
if (del <= 0 || xdcsc->iopbase->errs) {
|
|
printf("%s: off-line: %s\n", xdcsc->sc_dev.dv_xname,
|
|
xdc_e2str(xdcsc->iopbase->errno));
|
|
xdcsc->xdc->xdc_csr = XDC_RESET;
|
|
XDC_WAIT(xdcsc->xdc, del, XDC_RESETUSEC, XDC_RESET);
|
|
if (del <= 0)
|
|
panic("xdc_reset");
|
|
} else {
|
|
xdcsc->xdc->xdc_csr = XDC_CLRRIO; /* clear RIO */
|
|
}
|
|
bcopy(&tmpiopb, xdcsc->iopbase, sizeof(tmpiopb));
|
|
}
|
|
|
|
|
|
/*
|
|
* xdc_reset: reset everything: requests are marked as errors except
|
|
* a polled request (which is resubmitted)
|
|
*/
|
|
int
|
|
xdc_reset(xdcsc, quiet, blastmode, error, xdsc)
|
|
struct xdc_softc *xdcsc;
|
|
int quiet, blastmode, error;
|
|
struct xd_softc *xdsc;
|
|
|
|
{
|
|
int del = 0, lcv, retval = XD_ERR_AOK;
|
|
int oldfree = xdcsc->nfree;
|
|
|
|
/* soft reset hardware */
|
|
|
|
if (!quiet)
|
|
printf("%s: soft reset\n", xdcsc->sc_dev.dv_xname);
|
|
xdcsc->xdc->xdc_csr = XDC_RESET;
|
|
XDC_WAIT(xdcsc->xdc, del, XDC_RESETUSEC, XDC_RESET);
|
|
if (del <= 0) {
|
|
blastmode = XD_RSET_ALL; /* dead, flush all requests */
|
|
retval = XD_ERR_FAIL;
|
|
}
|
|
if (xdsc)
|
|
xdc_xdreset(xdcsc, xdsc);
|
|
|
|
/* fix queues based on "blast-mode" */
|
|
|
|
for (lcv = 0; lcv < XDC_MAXIOPB; lcv++) {
|
|
register struct xd_iorq *iorq = &xdcsc->reqs[lcv];
|
|
|
|
if (XD_STATE(iorq->mode) != XD_SUB_POLL &&
|
|
XD_STATE(iorq->mode) != XD_SUB_WAIT &&
|
|
XD_STATE(iorq->mode) != XD_SUB_NORM)
|
|
/* is it active? */
|
|
continue;
|
|
|
|
xdcsc->nrun--; /* it isn't running any more */
|
|
if (blastmode == XD_RSET_ALL || blastmode != lcv) {
|
|
/* failed */
|
|
iorq->errno = error;
|
|
xdcsc->iopbase[lcv].done = xdcsc->iopbase[lcv].errs = 1;
|
|
switch (XD_STATE(xdcsc->reqs[lcv].mode)) {
|
|
case XD_SUB_NORM:
|
|
iorq->buf->b_error = EIO;
|
|
iorq->buf->b_flags |= B_ERROR;
|
|
iorq->buf->b_resid =
|
|
iorq->sectcnt * XDFM_BPS;
|
|
|
|
bus_dmamap_sync(xdcsc->dmatag, iorq->dmamap, 0,
|
|
iorq->dmamap->dm_mapsize,
|
|
(iorq->buf->b_flags & B_READ)
|
|
? BUS_DMASYNC_POSTREAD
|
|
: BUS_DMASYNC_POSTWRITE);
|
|
|
|
bus_dmamap_unload(xdcsc->dmatag, iorq->dmamap);
|
|
|
|
disk_unbusy(&xdcsc->reqs[lcv].xd->sc_dk,
|
|
(xdcsc->reqs[lcv].buf->b_bcount -
|
|
xdcsc->reqs[lcv].buf->b_resid));
|
|
biodone(iorq->buf);
|
|
XDC_FREE(xdcsc, lcv); /* add to free list */
|
|
break;
|
|
case XD_SUB_WAIT:
|
|
wakeup(iorq);
|
|
case XD_SUB_POLL:
|
|
xdcsc->ndone++;
|
|
iorq->mode =
|
|
XD_NEWSTATE(iorq->mode, XD_SUB_DONE);
|
|
break;
|
|
}
|
|
|
|
} else {
|
|
|
|
/* resubmit, put at front of wait queue */
|
|
XDC_HWAIT(xdcsc, lcv);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* now, if stuff is waiting, start it.
|
|
* since we just reset it should go
|
|
*/
|
|
xdc_start(xdcsc, XDC_MAXIOPB);
|
|
|
|
/* ok, we did it */
|
|
if (oldfree == 0 && xdcsc->nfree)
|
|
wakeup(&xdcsc->nfree);
|
|
|
|
#ifdef XDC_DIAG
|
|
del = xdcsc->nwait + xdcsc->nrun + xdcsc->nfree + xdcsc->ndone;
|
|
if (del != XDC_MAXIOPB)
|
|
printf("%s: diag: xdc_reset miscount (%d should be %d)!\n",
|
|
xdcsc->sc_dev.dv_xname, del, XDC_MAXIOPB);
|
|
else
|
|
if (xdcsc->ndone > XDC_MAXIOPB - XDC_SUBWAITLIM)
|
|
printf("%s: diag: lots of done jobs (%d)\n",
|
|
xdcsc->sc_dev.dv_xname, xdcsc->ndone);
|
|
#endif
|
|
printf("RESET DONE\n");
|
|
return (retval);
|
|
}
|
|
/*
|
|
* xdc_start: start all waiting buffers
|
|
*/
|
|
|
|
void
|
|
xdc_start(xdcsc, maxio)
|
|
struct xdc_softc *xdcsc;
|
|
int maxio;
|
|
|
|
{
|
|
int rqno;
|
|
while (maxio && xdcsc->nwait &&
|
|
(xdcsc->xdc->xdc_csr & XDC_ADDING) == 0) {
|
|
XDC_GET_WAITER(xdcsc, rqno); /* note: rqno is an "out"
|
|
* param */
|
|
if (xdc_submit_iorq(xdcsc, rqno, XD_SUB_NOQ) != XD_ERR_AOK)
|
|
panic("xdc_start"); /* should never happen */
|
|
maxio--;
|
|
}
|
|
}
|
|
/*
|
|
* xdc_remove_iorq: remove "done" IOPB's.
|
|
*/
|
|
|
|
int
|
|
xdc_remove_iorq(xdcsc)
|
|
struct xdc_softc *xdcsc;
|
|
|
|
{
|
|
int errno, rqno, comm, errs;
|
|
struct xdc *xdc = xdcsc->xdc;
|
|
struct xd_iopb *iopb;
|
|
struct xd_iorq *iorq;
|
|
struct buf *bp;
|
|
|
|
if (xdc->xdc_csr & XDC_F_ERROR) {
|
|
/*
|
|
* FATAL ERROR: should never happen under normal use. This
|
|
* error is so bad, you can't even tell which IOPB is bad, so
|
|
* we dump them all.
|
|
*/
|
|
errno = xdc->xdc_f_err;
|
|
printf("%s: fatal error 0x%02x: %s\n", xdcsc->sc_dev.dv_xname,
|
|
errno, xdc_e2str(errno));
|
|
if (xdc_reset(xdcsc, 0, XD_RSET_ALL, errno, 0) != XD_ERR_AOK) {
|
|
printf("%s: soft reset failed!\n",
|
|
xdcsc->sc_dev.dv_xname);
|
|
panic("xdc_remove_iorq: controller DEAD");
|
|
}
|
|
return (XD_ERR_AOK);
|
|
}
|
|
|
|
/*
|
|
* get iopb that is done
|
|
*
|
|
* hmm... I used to read the address of the done IOPB off the VME
|
|
* registers and calculate the rqno directly from that. that worked
|
|
* until I started putting a load on the controller. when loaded, i
|
|
* would get interrupts but neither the REMIOPB or F_ERROR bits would
|
|
* be set, even after DELAY'ing a while! later on the timeout
|
|
* routine would detect IOPBs that were marked "running" but their
|
|
* "done" bit was set. rather than dealing directly with this
|
|
* problem, it is just easier to look at all running IOPB's for the
|
|
* done bit.
|
|
*/
|
|
if (xdc->xdc_csr & XDC_REMIOPB) {
|
|
xdc->xdc_csr = XDC_CLRRIO;
|
|
}
|
|
|
|
for (rqno = 0; rqno < XDC_MAXIOPB; rqno++) {
|
|
iorq = &xdcsc->reqs[rqno];
|
|
if (iorq->mode == 0 || XD_STATE(iorq->mode) == XD_SUB_DONE)
|
|
continue; /* free, or done */
|
|
iopb = &xdcsc->iopbase[rqno];
|
|
if (iopb->done == 0)
|
|
continue; /* not done yet */
|
|
|
|
#ifdef XDC_DEBUG
|
|
{
|
|
u_char *rio = (u_char *) iopb;
|
|
int sz = sizeof(struct xd_iopb), lcv;
|
|
printf("%s: rio #%d [", xdcsc->sc_dev.dv_xname, rqno);
|
|
for (lcv = 0; lcv < sz; lcv++)
|
|
printf(" %02x", rio[lcv]);
|
|
printf("]\n");
|
|
}
|
|
#endif /* XDC_DEBUG */
|
|
|
|
xdcsc->nrun--;
|
|
|
|
comm = iopb->comm;
|
|
errs = iopb->errs;
|
|
|
|
if (errs)
|
|
iorq->errno = iopb->errno;
|
|
else
|
|
iorq->errno = 0;
|
|
|
|
/* handle non-fatal errors */
|
|
|
|
if (errs &&
|
|
xdc_error(xdcsc, iorq, iopb, rqno, comm) == XD_ERR_AOK)
|
|
continue; /* AOK: we resubmitted it */
|
|
|
|
|
|
/* this iorq is now done (hasn't been restarted or anything) */
|
|
|
|
if ((iorq->mode & XD_MODE_VERBO) && iorq->lasterror)
|
|
xdc_perror(iorq, iopb, 0);
|
|
|
|
/* now, if read/write check to make sure we got all the data
|
|
* we needed. (this may not be the case if we got an error in
|
|
* the middle of a multisector request). */
|
|
|
|
if ((iorq->mode & XD_MODE_B144) != 0 && errs == 0 &&
|
|
(comm == XDCMD_RD || comm == XDCMD_WR)) {
|
|
/* we just successfully processed a bad144 sector
|
|
* note: if we are in bad 144 mode, the pointers have
|
|
* been advanced already (see above) and are pointing
|
|
* at the bad144 sector. to exit bad144 mode, we
|
|
* must advance the pointers 1 sector and issue a new
|
|
* request if there are still sectors left to process
|
|
*
|
|
*/
|
|
XDC_ADVANCE(iorq, 1); /* advance 1 sector */
|
|
|
|
/* exit b144 mode */
|
|
iorq->mode = iorq->mode & (~XD_MODE_B144);
|
|
|
|
if (iorq->sectcnt) { /* more to go! */
|
|
iorq->lasterror = iorq->errno = iopb->errno = 0;
|
|
iopb->errs = iopb->done = 0;
|
|
iorq->tries = 0;
|
|
iopb->sectcnt = iorq->sectcnt;
|
|
iopb->cylno = iorq->blockno /
|
|
iorq->xd->sectpercyl;
|
|
iopb->headno =
|
|
(iorq->blockno / iorq->xd->nhead) %
|
|
iorq->xd->nhead;
|
|
iopb->sectno = iorq->blockno % XDFM_BPS;
|
|
iopb->daddr = (u_long) iorq->dbuf;
|
|
XDC_HWAIT(xdcsc, rqno);
|
|
xdc_start(xdcsc, 1); /* resubmit */
|
|
continue;
|
|
}
|
|
}
|
|
/* final cleanup, totally done with this request */
|
|
|
|
switch (XD_STATE(iorq->mode)) {
|
|
case XD_SUB_NORM:
|
|
bp = iorq->buf;
|
|
if (errs) {
|
|
bp->b_error = EIO;
|
|
bp->b_flags |= B_ERROR;
|
|
bp->b_resid = iorq->sectcnt * XDFM_BPS;
|
|
} else {
|
|
bp->b_resid = 0; /* done */
|
|
}
|
|
bus_dmamap_sync(xdcsc->dmatag, iorq->dmamap, 0,
|
|
iorq->dmamap->dm_mapsize,
|
|
(bp->b_flags & B_READ)
|
|
? BUS_DMASYNC_POSTREAD
|
|
: BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(xdcsc->dmatag, iorq->dmamap);
|
|
|
|
disk_unbusy(&iorq->xd->sc_dk,
|
|
(bp->b_bcount - bp->b_resid));
|
|
XDC_FREE(xdcsc, rqno);
|
|
biodone(bp);
|
|
break;
|
|
case XD_SUB_WAIT:
|
|
iorq->mode = XD_NEWSTATE(iorq->mode, XD_SUB_DONE);
|
|
xdcsc->ndone++;
|
|
wakeup(iorq);
|
|
break;
|
|
case XD_SUB_POLL:
|
|
iorq->mode = XD_NEWSTATE(iorq->mode, XD_SUB_DONE);
|
|
xdcsc->ndone++;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return (XD_ERR_AOK);
|
|
}
|
|
|
|
/*
|
|
* xdc_perror: print error.
|
|
* - if still_trying is true: we got an error, retried and got a
|
|
* different error. in that case lasterror is the old error,
|
|
* and errno is the new one.
|
|
* - if still_trying is not true, then if we ever had an error it
|
|
* is in lasterror. also, if iorq->errno == 0, then we recovered
|
|
* from that error (otherwise iorq->errno == iorq->lasterror).
|
|
*/
|
|
void
|
|
xdc_perror(iorq, iopb, still_trying)
|
|
struct xd_iorq *iorq;
|
|
struct xd_iopb *iopb;
|
|
int still_trying;
|
|
|
|
{
|
|
|
|
int error = iorq->lasterror;
|
|
|
|
printf("%s", (iorq->xd) ? iorq->xd->sc_dev.dv_xname
|
|
: iorq->xdc->sc_dev.dv_xname);
|
|
if (iorq->buf)
|
|
printf("%c: ", 'a' + DISKPART(iorq->buf->b_dev));
|
|
if (iopb->comm == XDCMD_RD || iopb->comm == XDCMD_WR)
|
|
printf("%s %d/%d/%d: ",
|
|
(iopb->comm == XDCMD_RD) ? "read" : "write",
|
|
iopb->cylno, iopb->headno, iopb->sectno);
|
|
printf("%s", xdc_e2str(error));
|
|
|
|
if (still_trying)
|
|
printf(" [still trying, new error=%s]", xdc_e2str(iorq->errno));
|
|
else
|
|
if (iorq->errno == 0)
|
|
printf(" [recovered in %d tries]", iorq->tries);
|
|
|
|
printf("\n");
|
|
}
|
|
|
|
/*
|
|
* xdc_error: non-fatal error encountered... recover.
|
|
* return AOK if resubmitted, return FAIL if this iopb is done
|
|
*/
|
|
int
|
|
xdc_error(xdcsc, iorq, iopb, rqno, comm)
|
|
struct xdc_softc *xdcsc;
|
|
struct xd_iorq *iorq;
|
|
struct xd_iopb *iopb;
|
|
int rqno, comm;
|
|
|
|
{
|
|
int errno = iorq->errno;
|
|
int erract = errno & XD_ERA_MASK;
|
|
int oldmode, advance;
|
|
#ifdef __sparc__
|
|
int i;
|
|
#endif
|
|
|
|
if (erract == XD_ERA_RSET) { /* some errors require a reset */
|
|
oldmode = iorq->mode;
|
|
iorq->mode = XD_SUB_DONE | (~XD_SUB_MASK & oldmode);
|
|
xdcsc->ndone++;
|
|
/* make xdc_start ignore us */
|
|
xdc_reset(xdcsc, 1, XD_RSET_NONE, errno, iorq->xd);
|
|
iorq->mode = oldmode;
|
|
xdcsc->ndone--;
|
|
}
|
|
/* check for read/write to a sector in bad144 table if bad: redirect
|
|
* request to bad144 area */
|
|
|
|
if ((comm == XDCMD_RD || comm == XDCMD_WR) &&
|
|
(iorq->mode & XD_MODE_B144) == 0) {
|
|
advance = iorq->sectcnt - iopb->sectcnt;
|
|
XDC_ADVANCE(iorq, advance);
|
|
#ifdef __sparc__
|
|
if ((i = isbad(&iorq->xd->dkb, iorq->blockno / iorq->xd->sectpercyl,
|
|
(iorq->blockno / iorq->xd->nsect) % iorq->xd->nhead,
|
|
iorq->blockno % iorq->xd->nsect)) != -1) {
|
|
iorq->mode |= XD_MODE_B144; /* enter bad144 mode &
|
|
* redirect */
|
|
iopb->errno = iopb->done = iopb->errs = 0;
|
|
iopb->sectcnt = 1;
|
|
iopb->cylno = (iorq->xd->ncyl + iorq->xd->acyl) - 2;
|
|
/* second to last acyl */
|
|
i = iorq->xd->sectpercyl - 1 - i; /* follow bad144
|
|
* standard */
|
|
iopb->headno = i / iorq->xd->nhead;
|
|
iopb->sectno = i % iorq->xd->nhead;
|
|
XDC_HWAIT(xdcsc, rqno);
|
|
xdc_start(xdcsc, 1); /* resubmit */
|
|
return (XD_ERR_AOK); /* recovered! */
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* it isn't a bad144 sector, must be real error! see if we can retry
|
|
* it?
|
|
*/
|
|
if ((iorq->mode & XD_MODE_VERBO) && iorq->lasterror)
|
|
xdc_perror(iorq, iopb, 1); /* inform of error state
|
|
* change */
|
|
iorq->lasterror = errno;
|
|
|
|
if ((erract == XD_ERA_RSET || erract == XD_ERA_HARD)
|
|
&& iorq->tries < XDC_MAXTRIES) { /* retry? */
|
|
iorq->tries++;
|
|
iorq->errno = iopb->errno = iopb->done = iopb->errs = 0;
|
|
XDC_HWAIT(xdcsc, rqno);
|
|
xdc_start(xdcsc, 1); /* restart */
|
|
return (XD_ERR_AOK); /* recovered! */
|
|
}
|
|
|
|
/* failed to recover from this error */
|
|
return (XD_ERR_FAIL);
|
|
}
|
|
|
|
/*
|
|
* xdc_tick: make sure xd is still alive and ticking (err, kicking).
|
|
*/
|
|
void
|
|
xdc_tick(arg)
|
|
void *arg;
|
|
|
|
{
|
|
struct xdc_softc *xdcsc = arg;
|
|
int lcv, s, reset = 0;
|
|
#ifdef XDC_DIAG
|
|
int wait, run, free, done, whd = 0;
|
|
u_char fqc[XDC_MAXIOPB], wqc[XDC_MAXIOPB], mark[XDC_MAXIOPB];
|
|
s = splbio();
|
|
wait = xdcsc->nwait;
|
|
run = xdcsc->nrun;
|
|
free = xdcsc->nfree;
|
|
done = xdcsc->ndone;
|
|
bcopy(xdcsc->waitq, wqc, sizeof(wqc));
|
|
bcopy(xdcsc->freereq, fqc, sizeof(fqc));
|
|
splx(s);
|
|
if (wait + run + free + done != XDC_MAXIOPB) {
|
|
printf("%s: diag: IOPB miscount (got w/f/r/d %d/%d/%d/%d, wanted %d)\n",
|
|
xdcsc->sc_dev.dv_xname, wait, free, run, done, XDC_MAXIOPB);
|
|
bzero(mark, sizeof(mark));
|
|
printf("FREE: ");
|
|
for (lcv = free; lcv > 0; lcv--) {
|
|
printf("%d ", fqc[lcv - 1]);
|
|
mark[fqc[lcv - 1]] = 1;
|
|
}
|
|
printf("\nWAIT: ");
|
|
lcv = wait;
|
|
while (lcv > 0) {
|
|
printf("%d ", wqc[whd]);
|
|
mark[wqc[whd]] = 1;
|
|
whd = (whd + 1) % XDC_MAXIOPB;
|
|
lcv--;
|
|
}
|
|
printf("\n");
|
|
for (lcv = 0; lcv < XDC_MAXIOPB; lcv++) {
|
|
if (mark[lcv] == 0)
|
|
printf("MARK: running %d: mode %d done %d errs %d errno 0x%x ttl %d buf %p\n",
|
|
lcv, xdcsc->reqs[lcv].mode,
|
|
xdcsc->iopbase[lcv].done,
|
|
xdcsc->iopbase[lcv].errs,
|
|
xdcsc->iopbase[lcv].errno,
|
|
xdcsc->reqs[lcv].ttl, xdcsc->reqs[lcv].buf);
|
|
}
|
|
} else
|
|
if (done > XDC_MAXIOPB - XDC_SUBWAITLIM)
|
|
printf("%s: diag: lots of done jobs (%d)\n",
|
|
xdcsc->sc_dev.dv_xname, done);
|
|
|
|
#endif
|
|
#ifdef XDC_DEBUG
|
|
printf("%s: tick: csr 0x%x, w/f/r/d %d/%d/%d/%d\n",
|
|
xdcsc->sc_dev.dv_xname,
|
|
xdcsc->xdc->xdc_csr, xdcsc->nwait, xdcsc->nfree, xdcsc->nrun,
|
|
xdcsc->ndone);
|
|
for (lcv = 0; lcv < XDC_MAXIOPB; lcv++) {
|
|
if (xdcsc->reqs[lcv].mode)
|
|
printf("running %d: mode %d done %d errs %d errno 0x%x\n",
|
|
lcv,
|
|
xdcsc->reqs[lcv].mode, xdcsc->iopbase[lcv].done,
|
|
xdcsc->iopbase[lcv].errs, xdcsc->iopbase[lcv].errno);
|
|
}
|
|
#endif
|
|
|
|
/* reduce ttl for each request if one goes to zero, reset xdc */
|
|
s = splbio();
|
|
for (lcv = 0; lcv < XDC_MAXIOPB; lcv++) {
|
|
if (xdcsc->reqs[lcv].mode == 0 ||
|
|
XD_STATE(xdcsc->reqs[lcv].mode) == XD_SUB_DONE)
|
|
continue;
|
|
xdcsc->reqs[lcv].ttl--;
|
|
if (xdcsc->reqs[lcv].ttl == 0)
|
|
reset = 1;
|
|
}
|
|
if (reset) {
|
|
printf("%s: watchdog timeout\n", xdcsc->sc_dev.dv_xname);
|
|
xdc_reset(xdcsc, 0, XD_RSET_NONE, XD_ERR_FAIL, NULL);
|
|
}
|
|
splx(s);
|
|
|
|
/* until next time */
|
|
|
|
callout_reset(&xdcsc->sc_tick_ch, XDC_TICKCNT, xdc_tick, xdcsc);
|
|
}
|
|
|
|
/*
|
|
* xdc_ioctlcmd: this function provides a user level interface to the
|
|
* controller via ioctl. this allows "format" programs to be written
|
|
* in user code, and is also useful for some debugging. we return
|
|
* an error code. called at user priority.
|
|
*/
|
|
int
|
|
xdc_ioctlcmd(xd, dev, xio)
|
|
struct xd_softc *xd;
|
|
dev_t dev;
|
|
struct xd_iocmd *xio;
|
|
|
|
{
|
|
int s, rqno, dummy;
|
|
caddr_t dvmabuf = NULL, buf = NULL;
|
|
struct xdc_softc *xdcsc;
|
|
int rseg, error;
|
|
bus_dma_segment_t seg;
|
|
|
|
/* check sanity of requested command */
|
|
|
|
switch (xio->cmd) {
|
|
|
|
case XDCMD_NOP: /* no op: everything should be zero */
|
|
if (xio->subfn || xio->dptr || xio->dlen ||
|
|
xio->block || xio->sectcnt)
|
|
return (EINVAL);
|
|
break;
|
|
|
|
case XDCMD_RD: /* read / write sectors (up to XD_IOCMD_MAXS) */
|
|
case XDCMD_WR:
|
|
if (xio->subfn || xio->sectcnt > XD_IOCMD_MAXS ||
|
|
xio->sectcnt * XDFM_BPS != xio->dlen || xio->dptr == NULL)
|
|
return (EINVAL);
|
|
break;
|
|
|
|
case XDCMD_SK: /* seek: doesn't seem useful to export this */
|
|
return (EINVAL);
|
|
|
|
case XDCMD_WRP: /* write parameters */
|
|
return (EINVAL);/* not useful, except maybe drive
|
|
* parameters... but drive parameters should
|
|
* go via disklabel changes */
|
|
|
|
case XDCMD_RDP: /* read parameters */
|
|
if (xio->subfn != XDFUN_DRV ||
|
|
xio->dlen || xio->block || xio->dptr)
|
|
return (EINVAL); /* allow read drive params to
|
|
* get hw_spt */
|
|
xio->sectcnt = xd->hw_spt; /* we already know the answer */
|
|
return (0);
|
|
break;
|
|
|
|
case XDCMD_XRD: /* extended read/write */
|
|
case XDCMD_XWR:
|
|
|
|
switch (xio->subfn) {
|
|
|
|
case XDFUN_THD:/* track headers */
|
|
if (xio->sectcnt != xd->hw_spt ||
|
|
(xio->block % xd->nsect) != 0 ||
|
|
xio->dlen != XD_IOCMD_HSZ * xd->hw_spt ||
|
|
xio->dptr == NULL)
|
|
return (EINVAL);
|
|
xio->sectcnt = 0;
|
|
break;
|
|
|
|
case XDFUN_FMT:/* NOTE: also XDFUN_VFY */
|
|
if (xio->cmd == XDCMD_XRD)
|
|
return (EINVAL); /* no XDFUN_VFY */
|
|
if (xio->sectcnt || xio->dlen ||
|
|
(xio->block % xd->nsect) != 0 || xio->dptr)
|
|
return (EINVAL);
|
|
break;
|
|
|
|
case XDFUN_HDR:/* header, header verify, data, data ECC */
|
|
return (EINVAL); /* not yet */
|
|
|
|
case XDFUN_DM: /* defect map */
|
|
case XDFUN_DMX:/* defect map (alternate location) */
|
|
if (xio->sectcnt || xio->dlen != XD_IOCMD_DMSZ ||
|
|
(xio->block % xd->nsect) != 0 || xio->dptr == NULL)
|
|
return (EINVAL);
|
|
break;
|
|
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
break;
|
|
|
|
case XDCMD_TST: /* diagnostics */
|
|
return (EINVAL);
|
|
|
|
default:
|
|
return (EINVAL);/* ??? */
|
|
}
|
|
|
|
xdcsc = xd->parent;
|
|
|
|
/* create DVMA buffer for request if needed */
|
|
if (xio->dlen) {
|
|
if ((error = xd_dmamem_alloc(xdcsc->dmatag, xdcsc->auxmap,
|
|
&seg, &rseg,
|
|
xio->dlen, &buf,
|
|
(bus_addr_t *)&dvmabuf)) != 0) {
|
|
return (error);
|
|
}
|
|
|
|
if (xio->cmd == XDCMD_WR || xio->cmd == XDCMD_XWR) {
|
|
if ((error = copyin(xio->dptr, buf, xio->dlen)) != 0) {
|
|
bus_dmamem_unmap(xdcsc->dmatag, buf, xio->dlen);
|
|
bus_dmamem_free(xdcsc->dmatag, &seg, rseg);
|
|
return (error);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* do it! */
|
|
|
|
error = 0;
|
|
s = splbio();
|
|
rqno = xdc_cmd(xdcsc, xio->cmd, xio->subfn, xd->xd_drive, xio->block,
|
|
xio->sectcnt, dvmabuf, XD_SUB_WAIT);
|
|
if (rqno == XD_ERR_FAIL) {
|
|
error = EIO;
|
|
goto done;
|
|
}
|
|
xio->errno = xdcsc->reqs[rqno].errno;
|
|
xio->tries = xdcsc->reqs[rqno].tries;
|
|
XDC_DONE(xdcsc, rqno, dummy);
|
|
|
|
if (xio->cmd == XDCMD_RD || xio->cmd == XDCMD_XRD)
|
|
error = copyout(buf, xio->dptr, xio->dlen);
|
|
|
|
done:
|
|
splx(s);
|
|
if (dvmabuf) {
|
|
xd_dmamem_free(xdcsc->dmatag, xdcsc->auxmap, &seg, rseg,
|
|
xio->dlen, buf);
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* xdc_e2str: convert error code number into an error string
|
|
*/
|
|
char *
|
|
xdc_e2str(no)
|
|
int no;
|
|
{
|
|
switch (no) {
|
|
case XD_ERR_FAIL:
|
|
return ("Software fatal error");
|
|
case XD_ERR_AOK:
|
|
return ("Successful completion");
|
|
case XD_ERR_ICYL:
|
|
return ("Illegal cylinder address");
|
|
case XD_ERR_IHD:
|
|
return ("Illegal head address");
|
|
case XD_ERR_ISEC:
|
|
return ("Illgal sector address");
|
|
case XD_ERR_CZER:
|
|
return ("Count zero");
|
|
case XD_ERR_UIMP:
|
|
return ("Unimplemented command");
|
|
case XD_ERR_IF1:
|
|
return ("Illegal field length 1");
|
|
case XD_ERR_IF2:
|
|
return ("Illegal field length 2");
|
|
case XD_ERR_IF3:
|
|
return ("Illegal field length 3");
|
|
case XD_ERR_IF4:
|
|
return ("Illegal field length 4");
|
|
case XD_ERR_IF5:
|
|
return ("Illegal field length 5");
|
|
case XD_ERR_IF6:
|
|
return ("Illegal field length 6");
|
|
case XD_ERR_IF7:
|
|
return ("Illegal field length 7");
|
|
case XD_ERR_ISG:
|
|
return ("Illegal scatter/gather length");
|
|
case XD_ERR_ISPT:
|
|
return ("Not enough sectors per track");
|
|
case XD_ERR_ALGN:
|
|
return ("Next IOPB address alignment error");
|
|
case XD_ERR_SGAL:
|
|
return ("Scatter/gather address alignment error");
|
|
case XD_ERR_SGEC:
|
|
return ("Scatter/gather with auto-ECC");
|
|
case XD_ERR_SECC:
|
|
return ("Soft ECC corrected");
|
|
case XD_ERR_SIGN:
|
|
return ("ECC ignored");
|
|
case XD_ERR_ASEK:
|
|
return ("Auto-seek retry recovered");
|
|
case XD_ERR_RTRY:
|
|
return ("Soft retry recovered");
|
|
case XD_ERR_HECC:
|
|
return ("Hard data ECC");
|
|
case XD_ERR_NHDR:
|
|
return ("Header not found");
|
|
case XD_ERR_NRDY:
|
|
return ("Drive not ready");
|
|
case XD_ERR_TOUT:
|
|
return ("Operation timeout");
|
|
case XD_ERR_VTIM:
|
|
return ("VMEDMA timeout");
|
|
case XD_ERR_DSEQ:
|
|
return ("Disk sequencer error");
|
|
case XD_ERR_HDEC:
|
|
return ("Header ECC error");
|
|
case XD_ERR_RVFY:
|
|
return ("Read verify");
|
|
case XD_ERR_VFER:
|
|
return ("Fatail VMEDMA error");
|
|
case XD_ERR_VBUS:
|
|
return ("VMEbus error");
|
|
case XD_ERR_DFLT:
|
|
return ("Drive faulted");
|
|
case XD_ERR_HECY:
|
|
return ("Header error/cyliner");
|
|
case XD_ERR_HEHD:
|
|
return ("Header error/head");
|
|
case XD_ERR_NOCY:
|
|
return ("Drive not on-cylinder");
|
|
case XD_ERR_SEEK:
|
|
return ("Seek error");
|
|
case XD_ERR_ILSS:
|
|
return ("Illegal sector size");
|
|
case XD_ERR_SEC:
|
|
return ("Soft ECC");
|
|
case XD_ERR_WPER:
|
|
return ("Write-protect error");
|
|
case XD_ERR_IRAM:
|
|
return ("IRAM self test failure");
|
|
case XD_ERR_MT3:
|
|
return ("Maintenance test 3 failure (DSKCEL RAM)");
|
|
case XD_ERR_MT4:
|
|
return ("Maintenance test 4 failure (header shift reg)");
|
|
case XD_ERR_MT5:
|
|
return ("Maintenance test 5 failure (VMEDMA regs)");
|
|
case XD_ERR_MT6:
|
|
return ("Maintenance test 6 failure (REGCEL chip)");
|
|
case XD_ERR_MT7:
|
|
return ("Maintenance test 7 failure (buffer parity)");
|
|
case XD_ERR_MT8:
|
|
return ("Maintenance test 8 failure (disk FIFO)");
|
|
case XD_ERR_IOCK:
|
|
return ("IOPB checksum miscompare");
|
|
case XD_ERR_IODM:
|
|
return ("IOPB DMA fatal");
|
|
case XD_ERR_IOAL:
|
|
return ("IOPB address alignment error");
|
|
case XD_ERR_FIRM:
|
|
return ("Firmware error");
|
|
case XD_ERR_MMOD:
|
|
return ("Illegal maintenance mode test number");
|
|
case XD_ERR_ACFL:
|
|
return ("ACFAIL asserted");
|
|
default:
|
|
return ("Unknown error");
|
|
}
|
|
}
|