Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
bc8e4f3bb2
NetBSD/sys/arch/sparc/scsi/sd.c
deraadt e9fee9d6d3 sparc runs in current today
1994-02-01 06:01:19 +00:00

885 lines
24 KiB
C
Raw Blame History

/*
* Copyright (c) 1990, 1992 The Regents of the University of California.
* All rights reserved.
*
* This software was developed by the Computer Systems Engineering group
* at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
* contributed to Berkeley.
*
* All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Lawrence Berkeley Laboratory.
*
* %sccs.include.redist.c%
*
* %W% (Berkeley) %G%
*
* from: Header: sd.c,v 1.27 93/04/29 01:22:19 torek Exp
* $Id: sd.c,v 1.5 1994/02/01 06:01:30 deraadt Exp $
*/
/*
* SCSI CCS (Command Command Set) disk driver.
*
* MACHINE INDEPENDENT (do not put machine dependent goo in here!)
*
* (from sd.c,v 1.7 90/12/15 14:11:26 van Exp)
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/proc.h>
#include <sys/buf.h>
#include <sys/errno.h>
#include <sys/device.h>
#include <sys/disklabel.h>
#include <sys/dkstat.h>
#include <sys/disk.h>
#include <sys/ioctl.h>
#include <sys/malloc.h>
#include <sparc/scsi/scsi.h>
#include <sparc/scsi/disk.h>
#include <sparc/scsi/scsivar.h>
#include <sparc/scsi/scsi_ioctl.h>
#include <machine/cpu.h>
#include <sparc/scsi/sdtrace.h>
#ifdef sparc /* XXX */
#define SUN_LABEL_HACK /* XXX */
#endif /* XXX */
#ifdef SUN_LABEL_HACK
#include <sparc/scsi/sun_disklabel.h>
#endif
/*
* Per-disk variables.
*
* sd_dk contains all the `disk' specific stuff (label/partitions,
* transfer rate, etc). We need only things that are special to
* scsi disks. Note that our blocks are in terms of DEV_BSIZE blocks.
*/
struct sd_softc {
struct dkdevice sc_dk; /* base disk device, must be first */
struct unit sc_unit; /* scsi unit */
pid_t sc_format_pid; /* process using "format" mode */
u_char sc_type; /* drive type */
u_char sc_bshift; /* convert device blocks to DEV_BSIZE blks */
short sc_flags; /* see below */
u_int sc_blks; /* number of blocks on device */
int sc_blksize; /* device block size in bytes */
/* should be in dkdevice?? */
struct buf sc_tab; /* transfer queue */
/* statistics */
long sc_resets; /* number of times reset */
long sc_transfers; /* count of total transfers */
long sc_partials; /* count of `partial' transfers */
/* for user formatting */
struct scsi_cdb sc_cmd;
struct scsi_fmt_sense sc_sense;
};
#define SDF_ALIVE 1 /* drive OK for regular kernel use */
/* definition of the autoconfig driver */
int sdmatch __P((struct device *, struct cfdata *, void *));
void sdattach __P((struct device *, struct device *, void *));
struct cfdriver sdcd =
{ NULL, "sd", sdmatch, sdattach, DV_DISK, sizeof(struct sd_softc) };
/* definition of the unit driver, for hba */
void sdigo __P((struct device *, struct scsi_cdb *));
void sdgo __P((struct device *, struct scsi_cdb *));
void sdintr __P((struct device *, int, int));
void sdreset __P((struct unit *));
static struct unitdriver sdunitdriver = { /*sdgo, sdintr*/ sdreset };
/* definition of the disk driver, for kernel */
void sdstrategy __P((struct buf *));
static struct dkdriver sddkdriver = { sdstrategy };
#ifdef DEBUG
int sddebug = 1;
#define SDB_ERROR 0x01
#define SDB_PARTIAL 0x02
#endif
#define sdunit(x) (minor(x) >> 3)
#define sdpart(x) (minor(x) & 0x7)
#define b_cylin b_resid
#define SDRETRY 2
/*
* Table of scsi commands users are allowed to access via `format'
* mode. 0 means not legal. 1 means `immediate' (doesn't need dma).
* -1 means needs dma and/or wait for intr (i.e., `slow').
*/
static char legal_cmds[256] = {
/***** 0 1 2 3 4 5 6 7 8 9 A B C D E F */
/*00*/ 0, 0, 0, 0, -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
/*10*/ 0, 0, 1, 0, 0, 1, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
/*20*/ 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
/*30*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
/*40*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
/*50*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
/*60*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
/*70*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
/*80*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
/*90*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
/*a0*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
/*b0*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
/*c0*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
/*d0*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
/*e0*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
/*f0*/ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
};
int
sdmatch(parent, cf, aux)
struct device *parent;
register struct cfdata *cf;
void *aux;
{
register struct scsi_attach_args *sa = aux;
#ifdef DEBUG
char *whynot;
#endif
/*
* unit number must match, or be given as `any'
*/
if (cf->cf_loc[0] != -1 && cf->cf_loc[0] != sa->sa_unit)
return (0);
/*
* drive must be a disk, and of a kind we recognize
*/
if ((sa->sa_inq_status & STS_MASK) != STS_GOOD) {
#ifdef DEBUG
whynot = "INQUIRY failed";
#endif
goto notdisk;
}
switch (sa->sa_si.si_type & TYPE_TYPE_MASK) {
case TYPE_DAD: /* disk */
case TYPE_WORM: /* WORM */
case TYPE_ROM: /* CD-ROM */
case TYPE_MO: /* Magneto-optical */
case TYPE_JUKEBOX: /* medium changer */
break;
default:
notdisk:
#ifdef DEBUG
whynot = "not a disk";
printf("[not matching `sd' at unit %d: %s]\n",
sa->sa_unit, whynot);
#endif
return (0);
}
/*
* It is a disk of some kind; take it. We will figure out
* the rest in the attach routine.
*/
return (1);
}
/*
* Attach a disk (called after sdmatch returns true).
* Note that this routine is never reentered (so we can use statics).
*/
void
sdattach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
register struct sd_softc *sc = (struct sd_softc *)self;
register struct scsi_attach_args *sa = aux;
register int i;
char vendor[10], drive[17], rev[5];
static u_char capbuf[8];
static struct scsi_cdb cap = { CMD_READ_CAPACITY };
#ifdef SUN_LABEL_HACK
static struct scsi_cdb rd0 = { CMD_READ10, 0, 0, 0, 0, 0, 0, 0, 1, 0 };
caddr_t sector;
#endif
/*
* Declare our existence.
*/
sc->sc_unit.u_driver = &sdunitdriver;
scsi_establish(&sc->sc_unit, &sc->sc_dk.dk_dev, sa->sa_unit);
/*
* Figure out what kind of disk this is.
* We only accepted it if the inquiry succeeded, so
* we can inspect those fields.
*/
i = (sa->sa_si.si_version >> VER_ANSI_SHIFT) & VER_ANSI_MASK;
if (i == 1 || i == 2) {
scsi_inq_ansi((struct scsi_inq_ansi *)&sa->sa_si,
vendor, drive, rev);
printf(": %s %s", vendor, drive);
/* XXX should we even ever bother printing this? */
if (rev[0])
printf(" %s", rev);
} else {
/* bleah */
bcopy("<unknown>", vendor, 10);
bcopy("<unknown>", drive, 10);
printf(": type 0x%x, qual 0x%x, ver %d",
sa->sa_si.si_type, sa->sa_si.si_qual,
sa->sa_si.si_version);
}
CDB10(&cap)->cdb_lun_rel = sc->sc_unit.u_unit << 5;
i = (*sc->sc_unit.u_hbd->hd_icmd)(sc->sc_unit.u_hba,
sc->sc_unit.u_targ, &cap, (char *)capbuf, sizeof capbuf, B_READ);
i &= STS_MASK;
if (i == STS_GOOD) {
#define NUMBER(p) (((p)[0] << 24) | ((p)[1] << 16) | ((p)[2] << 8) | (p)[3])
sc->sc_blks = NUMBER(&capbuf[0]);
sc->sc_blksize = NUMBER(&capbuf[4]);
} else if (i == STS_CHECKCOND &&
(strcmp(vendor, "HP") == 0 && strcmp(drive, "S6300.650A") == 0)) {
/* XXX unformatted or nonexistent MO medium: fake it */
sc->sc_blks = 318664;
sc->sc_blksize = 1024;
} else {
/* XXX shouldn't bail for removable media */
printf(": unable to determine drive capacity [sts=%x]\n", i);
return;
}
/* return value from read capacity is last valid block, not nblocks */
sc->sc_blks++;
printf(", %u %d byte blocks\n", sc->sc_blks, sc->sc_blksize);
if (sc->sc_blksize != DEV_BSIZE) {
for (i = sc->sc_blksize; i > DEV_BSIZE; i >>= 1)
++sc->sc_bshift;
if (i != DEV_BSIZE) {
printf("%s: blksize not multiple of %d: cannot use\n",
sc->sc_dk.dk_dev.dv_xname, DEV_BSIZE);
return;
}
sc->sc_blks <<= sc->sc_bshift;
}
sc->sc_type = sa->sa_si.si_type; /* sufficient? */
sc->sc_dk.dk_driver = &sddkdriver;
#ifdef notyet
dk_establish(&sc->sc_dk);
/* READ DISK LABEL HERE, UNLESS REMOVABLE MEDIUM... NEEDS THOUGHT */
#else
sc->sc_dk.dk_label.d_secsize = 512; /* XXX */
sc->sc_dk.dk_bps = (3600/60) * 32 * 512;/* XXX */
#ifdef SUN_LABEL_HACK
sector = (caddr_t)malloc(sc->sc_blksize, M_DEVBUF, M_NOWAIT);
CDB10(&rd0)->cdb_lun_rel = sc->sc_unit.u_unit << 5;
i = (*sc->sc_unit.u_hbd->hd_icmd)(sc->sc_unit.u_hba,
sc->sc_unit.u_targ, &rd0, sector, sc->sc_blksize, B_READ);
if (i == STS_GOOD) {
printf("%s: <%s>\n", sc->sc_dk.dk_dev.dv_xname,
((struct sun_disklabel *)sector)->sl_text);
if (sun_disklabel(sector, &sc->sc_dk.dk_label))
sc->sc_flags |= SDF_ALIVE;
else
printf("%s: sun_disklabel fails\n",
sc->sc_dk.dk_dev.dv_xname);
} else
printf("%s: could not read sector 0 for disk label\n",
sc->sc_dk.dk_dev.dv_xname);
free(sector, M_DEVBUF);
#endif
#endif /* notyet */
}
/*
* Reset a disk, after a SCSI bus reset.
*
* XXX untested and probably incomplete/incorrect
*/
void
sdreset(u)
register struct unit *u;
{
register struct sd_softc *sc = (struct sd_softc *)u->u_dev;
printf(" %s", sc->sc_dk.dk_dev.dv_xname);
sc->sc_resets++;
}
/* dev_t is short, must use prototype syntax */
int
sdopen(dev_t dev, int flags, int ifmt, struct proc *p)
{
register int unit = sdunit(dev);
register struct sd_softc *sc;
if (unit >= sdcd.cd_ndevs || (sc = sdcd.cd_devs[unit]) == NULL)
return (ENXIO);
if ((sc->sc_flags & SDF_ALIVE) == 0 && suser(p->p_ucred, &p->p_acflag))
return (ENXIO);
return (0);
}
int
sdclose(dev_t dev, int flags, int ifmt, struct proc *p)
{
register struct sd_softc *sc = sdcd.cd_devs[sdunit(dev)];
sc->sc_format_pid = 0;
return (0);
}
/*
* This routine is called for partial block transfers and non-aligned
* transfers (the latter only being possible on devices with a block size
* larger than DEV_BSIZE). The operation is performed in three steps
* using a locally allocated buffer:
* 1. transfer any initial partial block
* 2. transfer full blocks
* 3. transfer any final partial block
*/
static void
sdlblkstrat(bp, bsize)
register struct buf *bp;
register int bsize;
{
register int bn, resid, boff, count;
register caddr_t addr, cbuf;
struct buf *tbp;
/* should probably use geteblk() here, but I fear consequences */
cbuf = (caddr_t)malloc(bsize, M_DEVBUF, M_WAITOK);
tbp = (struct buf *)malloc(sizeof *tbp, M_DEVBUF, M_WAITOK);
bzero((caddr_t)tbp, sizeof *tbp);
tbp->b_proc = curproc;
tbp->b_dev = bp->b_dev;
bn = bp->b_blkno;
resid = bp->b_bcount;
addr = bp->b_un.b_addr;
#ifdef DEBUG
if (sddebug & SDB_PARTIAL)
printf("sdlblkstrat: bp %x flags %x bn %x resid %x addr %x\n",
bp, bp->b_flags, bn, resid, addr);
#endif
while (resid > 0) {
boff = dbtob(bn) & (bsize - 1);
if (boff || resid < bsize) {
struct sd_softc *sc = sdcd.cd_devs[sdunit(bp->b_dev)];
sc->sc_partials++;
count = min(resid, bsize - boff);
tbp->b_flags = B_BUSY | B_READ;
tbp->b_blkno = bn - btodb(boff);
tbp->b_un.b_addr = cbuf;
tbp->b_bcount = bsize;
#ifdef DEBUG
if (sddebug & SDB_PARTIAL)
printf(" readahead: bn %x cnt %x off %x addr %x\n",
tbp->b_blkno, count, boff, addr);
#endif
sdstrategy(tbp);
biowait(tbp);
if (tbp->b_flags & B_ERROR) {
bp->b_flags |= B_ERROR;
bp->b_error = tbp->b_error;
break;
}
if (bp->b_flags & B_READ) {
bcopy(&cbuf[boff], addr, count);
goto done;
}
bcopy(addr, &cbuf[boff], count);
#ifdef DEBUG
if (sddebug & SDB_PARTIAL)
printf(" writeback: bn %x cnt %x off %x addr %x\n",
tbp->b_blkno, count, boff, addr);
#endif
} else {
count = resid & ~(bsize - 1);
tbp->b_blkno = bn;
tbp->b_un.b_addr = addr;
tbp->b_bcount = count;
#ifdef DEBUG
if (sddebug & SDB_PARTIAL)
printf(" fulltrans: bn %x cnt %x addr %x\n",
tbp->b_blkno, count, addr);
#endif
}
tbp->b_flags = B_BUSY | (bp->b_flags & B_READ);
sdstrategy(tbp);
biowait(tbp);
if (tbp->b_flags & B_ERROR) {
bp->b_flags |= B_ERROR;
bp->b_error = tbp->b_error;
break;
}
done:
bn += btodb(count);
resid -= count;
addr += count;
#ifdef DEBUG
if (sddebug & SDB_PARTIAL)
printf(" done: bn %x resid %x addr %x\n",
bn, resid, addr);
#endif
}
free(cbuf, M_DEVBUF);
free((caddr_t)tbp, M_DEVBUF);
biodone(bp);
}
/*
* Start a transfer on sc as described by bp
* (i.e., call hba or target start).
* If in format mode, we may not need dma.
*/
#define sdstart(sc, bp) { \
SD_TRACE(T_START, sc, bp); \
if ((sc)->sc_format_pid && legal_cmds[(sc)->sc_cmd.cdb_bytes[0]] > 0) \
(*(sc)->sc_unit.u_start)((sc)->sc_unit.u_updev, \
&(sc)->sc_unit.u_forw, (struct buf *)NULL, \
sdigo, &(sc)->sc_dk.dk_dev); \
else \
(*(sc)->sc_unit.u_start)((sc)->sc_unit.u_updev, \
&(sc)->sc_unit.u_forw, bp, sdgo, &(sc)->sc_dk.dk_dev); \
}
void
sdstrategy(bp)
register struct buf *bp;
{
register struct sd_softc *sc = sdcd.cd_devs[sdunit(bp->b_dev)];
register int s;
if (sc->sc_format_pid) {
/* XXXXXXXXX SHOULD NOT COMPARE curproc IN HERE!?! */
/*
* In format mode, only allow the owner to mess
* with the drive. Skip all the partition checks.
*/
if (sc->sc_format_pid != curproc->p_pid) {
bp->b_error = EPERM;
bp->b_flags |= B_ERROR;
biodone(bp);
return;
}
bp->b_cylin = 0;
} else {
register daddr_t bn = bp->b_blkno;
register int sz = howmany(bp->b_bcount, DEV_BSIZE);
register struct partition *p;
/*
* Make sure transfer is within partition.
* If it starts at the end, return EOF; if
* it extends past the end, truncate it.
*/
p = &sc->sc_dk.dk_label.d_partitions[sdpart(bp->b_dev)];
if ((unsigned)bn >= p->p_size) {
if ((unsigned)bn > p->p_size) {
bp->b_error = EINVAL;
bp->b_flags |= B_ERROR;
} else
bp->b_resid = bp->b_bcount;
biodone(bp);
return;
}
if (bn + sz > p->p_size) {
sz = p->p_size - bn;
bp->b_bcount = dbtob(sz);
}
/*
* Non-aligned or partial-block transfers handled specially.
* SHOULD THIS BE AT A HIGHER LEVEL?
*/
s = sc->sc_blksize - 1;
if ((dbtob(bn) & s) || (bp->b_bcount & s)) {
sdlblkstrat(bp, sc->sc_blksize);
return;
}
bp->b_cylin = (bn + p->p_offset) >> sc->sc_bshift;
}
/*
* Transfer valid, or format mode. Queue the request
* on the drive, and maybe try to start it.
*/
s = splbio();
disksort(&sc->sc_tab, bp);
if (sc->sc_tab.b_active == 0) {
sc->sc_tab.b_active = 1;
sdstart(sc, bp);
}
splx(s);
}
int
sderror(sc, stat)
register struct sd_softc *sc;
register int stat;
{
register struct scsi_sense *sn;
int retry = 0;
sc->sc_sense.status = stat;
if ((stat & STS_MASK) == STS_CHECKCOND) {
sn = (struct scsi_sense *)sc->sc_sense.sense;
stat = scsi_request_sense(sc->sc_unit.u_hba,
sc->sc_unit.u_targ, sc->sc_unit.u_unit,
(caddr_t)sn, sizeof sc->sc_sense.sense);
sc->sc_sense.status = stat; /* ??? */
if ((stat & STS_MASK) != STS_GOOD) {
printf("%s: sense failed, status %x\n",
sc->sc_dk.dk_dev.dv_xname, stat);
return (0);
}
printf("%s: scsi sense class %d, code %d",
sc->sc_dk.dk_dev.dv_xname,
SENSE_ECLASS(sn), SENSE_ECODE(sn));
if (SENSE_ISXSENSE(sn) && XSENSE_ISSTD(sn)) {
int key;
/*
* Standard extended sense: can examine sense key
* and (if valid) info.
*/
key = XSENSE_KEY(sn);
printf(", key %d", key);
if (XSENSE_IVALID(sn))
printf(", blk %d", XSENSE_INFO(sn));
/* no sense or recovered error, try again */
if (key == 0 || key == 1)
retry = 1;
}
printf("\n");
}
return (retry);
}
/*
* sdigo is called from the hba driver when it has got the scsi bus
* for us, and we were doing a format op that did not need dma.
*/
void
sdigo(sc0, cdb)
struct device *sc0;
struct scsi_cdb *cdb;
{
register struct sd_softc *sc = (struct sd_softc *)sc0;
register struct buf *bp = sc->sc_tab.b_actf;
register int stat;
stat = (*sc->sc_unit.u_hbd->hd_icmd)(sc->sc_unit.u_hba,
sc->sc_unit.u_targ, &sc->sc_cmd, bp->b_un.b_addr, bp->b_bcount,
bp->b_flags & B_READ);
sc->sc_sense.status = stat;
if (stat & 0xfe) { /* XXX */
(void) sderror(sc, stat);
bp->b_flags |= B_ERROR;
bp->b_error = EIO;
}
/*
* Done with SCSI bus, before we `ought' to be. Release it.
*/
(*sc->sc_unit.u_rel)(sc->sc_unit.u_updev);
bp->b_resid = 0;
sc->sc_tab.b_errcnt = 0;
sc->sc_tab.b_actf = bp->b_actf;
biodone(bp);
if ((bp = sc->sc_tab.b_actf) == NULL)
sc->sc_tab.b_active = 0;
else
sdstart(sc, bp);
}
/*
* sdgo is called from the hba driver or target code when it has
* allocated the scsi bus and DMA resources and target datapath for us.
*/
void
sdgo(sc0, cdb)
struct device *sc0;
register struct scsi_cdb *cdb;
{
register struct sd_softc *sc = (struct sd_softc *)sc0;
register struct buf *bp = sc->sc_tab.b_actf;
register int n;
register unsigned int u;
SD_TRACE(T_MKCDB, sc, bp);
if (sc->sc_format_pid) {
*cdb = sc->sc_cmd;
n = 0;
} else {
CDB10(cdb)->cdb_cmd = bp->b_flags & B_READ ? CMD_READ10 :
CMD_WRITE10;
CDB10(cdb)->cdb_lun_rel = sc->sc_unit.u_unit << 5;
u = bp->b_cylin;
CDB10(cdb)->cdb_lbah = u >> 24;
CDB10(cdb)->cdb_lbahm = u >> 16;
CDB10(cdb)->cdb_lbalm = u >> 8;
CDB10(cdb)->cdb_lbal = u;
CDB10(cdb)->cdb_xxx = 0;
n = sc->sc_blksize - 1;
u = (bp->b_bcount + n) >> (DEV_BSHIFT + sc->sc_bshift);
CDB10(cdb)->cdb_lenh = u >> 8;
CDB10(cdb)->cdb_lenl = u;
CDB10(cdb)->cdb_ctrl = 0;
n = (bp->b_bcount & n) != 0;
#ifdef DEBUG
if (n)
printf("%s: partial block xfer -- %x bytes\n",
sc->sc_dk.dk_dev.dv_xname, bp->b_bcount);
#endif
sc->sc_transfers++;
}
if ((*sc->sc_unit.u_go)(sc->sc_unit.u_updev, sc->sc_unit.u_targ,
sdintr, (void *)sc, bp, n) == 0) {
#ifdef notyet
sc->sc_dk.dk_busy = 1;
sc->sc_dk.dk_seek++; /* XXX */
sc->sc_dk.dk_xfer++;
sc->sc_dk.dk_wds += bp->b_bcount >> 6;
#endif
return;
}
/*
* Some sort of nasty unrecoverable error: clobber the
* transfer. Call the bus release function first, though.
*/
(*sc->sc_unit.u_rel)(sc->sc_unit.u_updev);
#ifdef DEBUG
if (sddebug & SDB_ERROR)
printf("%s: sdgo: %s adr %d blk %d len %d ecnt %d\n",
sc->sc_dk.dk_dev.dv_xname,
bp->b_flags & B_READ? "read" : "write",
bp->b_un.b_addr, bp->b_cylin, bp->b_bcount,
sc->sc_tab.b_errcnt);
#endif
bp->b_flags |= B_ERROR;
bp->b_error = EIO;
bp->b_resid = 0;
sc->sc_tab.b_errcnt = 0;
sc->sc_tab.b_actf = bp->b_actf;
biodone(bp);
if ((bp = sc->sc_tab.b_actf) == NULL)
sc->sc_tab.b_active = 0;
else
sdstart(sc, bp);
}
/*
* A transfer finished (or, someday, disconnected).
* We are already off the target/hba queues.
* Restart this one for error recovery, or start the next, as appropriate.
*/
void
sdintr(sc0, stat, resid)
struct device *sc0;
int stat, resid;
{
register struct sd_softc *sc = (struct sd_softc *)sc0;
register struct buf *bp = sc->sc_tab.b_actf;
int retry;
if (bp == NULL)
panic("sdintr");
SD_TRACE(T_INTR, sc, bp);
#ifdef notyet
sc->sc_dk.dk_busy = 0;
#endif
if ((stat & STS_MASK) != STS_GOOD) {
#ifdef DEBUG
if (sddebug & SDB_ERROR)
printf("%s: sdintr scsi status 0x%x resid %d\n",
sc->sc_dk.dk_dev.dv_xname, stat, resid);
#endif
retry = sderror(sc, stat);
if (retry && ++sc->sc_tab.b_errcnt <= SDRETRY) {
printf("%s: retry %d\n",
sc->sc_dk.dk_dev.dv_xname, sc->sc_tab.b_errcnt);
goto restart;
}
bp->b_flags |= B_ERROR;
bp->b_error = EIO;
}
bp->b_resid = resid;
sc->sc_tab.b_errcnt = 0;
sc->sc_tab.b_actf = bp->b_actf;
biodone(bp);
if ((bp = sc->sc_tab.b_actf) == NULL)
sc->sc_tab.b_active = 0;
else {
restart:
sdstart(sc, bp);
}
}
int
sdioctl(dev_t dev, int cmd, register caddr_t data, int flag, struct proc *p)
{
register struct sd_softc *sc = sdcd.cd_devs[sdunit(dev)];
#ifdef COMPAT_SUNOS
int error;
error = sun_dkioctl(&sc->sc_dk, cmd, data, sdpart(dev));
if (error >= 0)
return (error);
#endif
switch (cmd) {
case SDIOCSFORMAT:
/* take this device into or out of "format" mode */
if (suser(p->p_ucred, &p->p_acflag))
return (EPERM);
if (*(int *)data) {
if (sc->sc_format_pid)
return (EPERM);
sc->sc_format_pid = p->p_pid;
} else
sc->sc_format_pid = 0;
break;
case SDIOCGFORMAT:
/* find out who has the device in format mode */
*(int *)data = sc->sc_format_pid;
break;
case SDIOCSCSICOMMAND:
#define cdb ((struct scsi_cdb *)data)
/*
* Save what user gave us as SCSI cdb to use with next
* read or write to the char device. Be sure to replace
* the lun field with the actual unit number.
*/
if (sc->sc_format_pid != p->p_pid)
return (EPERM);
if (legal_cmds[cdb->cdb_bytes[0]] == 0)
return (EINVAL);
sc->sc_cmd = *cdb;
sc->sc_cmd.cdb_bytes[1] =
(sc->sc_cmd.cdb_bytes[1] & ~(7 << 5)) |
(sc->sc_unit.u_unit << 5);
#undef cdb
break;
case SDIOCSENSE:
/*
* return the SCSI sense data saved after the last
* operation that completed with "check condition" status.
*/
sc->sc_sense = *(struct scsi_fmt_sense *)data;
break;
case DIOCGDINFO:
*(struct disklabel *)data = sc->sc_dk.dk_label;
break;
case DIOCGPART:
((struct partinfo *)data)->disklab = &sc->sc_dk.dk_label;
((struct partinfo *)data)->part =
&sc->sc_dk.dk_label.d_partitions[sdpart(dev)];
break;
default:
return (ENOTTY);
}
return (0);
}
int
sdsize(dev_t dev)
{
register int unit = sdunit(dev);
register struct sd_softc *sc;
if (unit >= sdcd.cd_ndevs || (sc = sdcd.cd_devs[unit]) == NULL ||
(sc->sc_flags & SDF_ALIVE) == 0)
return (-1);
return (sc->sc_dk.dk_label.d_partitions[sdpart(dev)].p_size);
}
/*
* Write `len' bytes from address `addr' to drive and partition in `dev',
* at block blkoff from the beginning of the partition. The address is
* either kernel virtual or physical (some machines may never use one or
* the other, but we need it in the protocol to stay machine-independent).
*/
int
sddump(dev_t dev, daddr_t blkoff, caddr_t addr, int len)
{
register struct sd_softc *sc;
register struct partition *p;
register daddr_t bn, n, nblks;
register struct hba_softc *hba;
register int stat, unit;
struct scsi_cdb cdb;
/* drive ok? */
unit = sdunit(dev);
if (unit >= sdcd.cd_ndevs || (sc = sdcd.cd_devs[unit]) == NULL ||
(sc->sc_flags & SDF_ALIVE) == 0)
return (ENXIO);
/* blocks in range? */
p = &sc->sc_dk.dk_label.d_partitions[sdpart(dev)];
n = (len + sc->sc_blksize - 1) >> DEV_BSHIFT;
if (blkoff < 0 || blkoff >= p->p_size || blkoff + n > p->p_size)
return (EINVAL);
bn = blkoff + p->p_offset;
bn >>= sc->sc_bshift;
/* scsi bus idle? */
hba = sc->sc_unit.u_hba;
if (hba->hba_head) {
(*hba->hba_driver->hd_reset)(hba, 0);
printf("[reset %s] ", sc->sc_dk.dk_dev.dv_xname);
}
CDB10(&cdb)->cdb_cmd = CMD_WRITE10;
CDB10(&cdb)->cdb_lun_rel = sc->sc_unit.u_unit << 5;
CDB10(&cdb)->cdb_xxx = 0;
CDB10(&cdb)->cdb_ctrl = 0;
#define DUMP_MAX (32 * 1024) /* no more than 32k per write */
for (;;) {
if ((n = len) > DUMP_MAX)
n = DUMP_MAX;
CDB10(&cdb)->cdb_lbah = bn >> 24;
CDB10(&cdb)->cdb_lbahm = bn >> 16;
CDB10(&cdb)->cdb_lbalm = bn >> 8;
CDB10(&cdb)->cdb_lbal = bn;
nblks = n >> (DEV_BSHIFT + sc->sc_bshift);
CDB10(&cdb)->cdb_lenh = nblks >> 8;
CDB10(&cdb)->cdb_lenl = nblks;
stat = hba->hba_driver->hd_dump(hba, sc->sc_unit.u_targ,
&cdb, addr, n);
if ((stat & STS_MASK) != STS_GOOD) {
printf("%s: scsi write error 0x%x\ndump ",
sc->sc_dk.dk_dev.dv_xname, stat);
return (EIO);
}
if ((len -= n) == 0)
return (0);
addr += n;
bn += nblks;
}
}
Reference in New Issue View Git Blame Copy Permalink