Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/pci/if_ntwoc_pci.c

735 lines
20 KiB
C
Raw Blame History

/* $NetBSD: if_ntwoc_pci.c,v 1.22 2009/03/14 15:36:19 dsl Exp $ */
/*
* Copyright (c) 1998 Vixie Enterprises
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of Vixie Enterprises nor the names
* of its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY VIXIE ENTERPRISES AND
* CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL VIXIE ENTERPRISES OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This software has been written for Vixie Enterprises by Michael Graff
* <explorer@flame.org>. To learn more about Vixie Enterprises, see
* ``http://www.vix.com''.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: if_ntwoc_pci.c,v 1.22 2009/03/14 15:36:19 dsl Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <net/if.h>
#include <sys/cpu.h>
#include <sys/bus.h>
#include <sys/intr.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcidevs.h>
#include <dev/ic/hd64570reg.h>
#include <dev/ic/hd64570var.h>
#include <dev/pci/if_ntwoc_pcireg.h>
#if 0
#define NTWO_DEBUG
#endif
#ifdef NTWO_DEBUG
#define NTWO_DPRINTF(x) printf x
#else
#define NTWO_DPRINTF(x)
#endif
/*
* buffers per tx and rx channels, per port, and the size of each.
* Don't use these constants directly, as they are really only hints.
* Use the calculated values stored in struct sca_softc instead.
*
* Each must be at least 2, receive would be better at around 20 or so.
*
* XXX Due to a damned near impossible to track down bug, transmit buffers
* MUST be 2, no more, no less.
*/
#ifndef NTWOC_NtxBUFS
#define NTWOC_NtxBUFS 40
#endif
#ifndef NTWOC_NrxBUFS
#define NTWOC_NrxBUFS 20
#endif
#if __NetBSD_Version__ >= 104160000
static void ntwoc_pci_config_interrupts(struct device *);
#else
#define SCA_BASECLOCK 16000000
#endif
/*
* Card specific config register location
*/
#define PCI_CBMA_ASIC 0x10 /* Configuration Base Memory Address */
#define PCI_CBMA_SCA 0x18
struct ntwoc_pci_softc {
/* Generic device stuff */
struct device sc_dev; /* Common to all devices */
/* PCI chipset glue */
pci_intr_handle_t *sc_ih; /* Interrupt handler */
pci_chipset_tag_t sc_sr; /* PCI chipset handle */
bus_space_tag_t sc_asic_iot; /* space cookie (for ASIC) */
bus_space_handle_t sc_asic_ioh; /* bus space handle (for ASIC) */
struct sca_softc sc_sca; /* the SCA itself */
};
static int ntwoc_pci_match(struct device *, struct cfdata *, void *);
static void ntwoc_pci_attach(struct device *, struct device *, void *);
static int ntwoc_pci_alloc_dma(struct sca_softc *);
static void ntwoc_pci_clock_callback(void *, int, int);
static void ntwoc_pci_dtr_callback(void *, int, int);
static void ntwoc_pci_get_clock(struct sca_port *, u_int8_t, u_int8_t,
u_int8_t, u_int8_t);
static int ntwoc_pci_intr(void *);
static void ntwoc_pci_setup_dma(struct sca_softc *);
static void ntwoc_pci_shutdown(void *sc);
CFATTACH_DECL(ntwoc_pci, sizeof(struct ntwoc_pci_softc),
ntwoc_pci_match, ntwoc_pci_attach, NULL, NULL);
/*
* Names for daughter card types. These match the NTWOC_DB_* defines.
*/
const char *ntwoc_pci_db_names[] = {
"V.35", "Unknown 0x01", "Test", "Unknown 0x03",
"RS232", "Unknown 0x05", "RS422", "None"
};
/*
* At least one implementation uses a somewhat strange register address
* mapping. If a card doesn't, define this to be a pass-through
* macro. (The ntwo driver needs this...)
*/
#define SCA_REG(y) (((y) & 0x0002) ? (((y) & 0x00fd) + 0x100) : (y))
/*
* functions that read and write to the sca registers
*/
static void
ntwoc_pci_sca_write_1(struct sca_softc *sc, u_int reg, u_int8_t val)
{
bus_space_write_1(sc->sc_iot, sc->sc_ioh, SCA_REG(reg), val);
}
static void
ntwoc_pci_sca_write_2(struct sca_softc *sc, u_int reg, u_int16_t val)
{
bus_space_write_2(sc->sc_iot, sc->sc_ioh, SCA_REG(reg), val);
}
static u_int8_t
ntwoc_pci_sca_read_1(struct sca_softc *sc, u_int reg)
{
return
bus_space_read_1(sc->sc_iot, sc->sc_ioh, SCA_REG(reg));
}
static u_int16_t
ntwoc_pci_sca_read_2(struct sca_softc *sc, u_int reg)
{
return
bus_space_read_2(sc->sc_iot, sc->sc_ioh, SCA_REG(reg));
}
static int
ntwoc_pci_match(struct device *parent, struct cfdata *match,
void *aux)
{
struct pci_attach_args *pa = (struct pci_attach_args *)aux;
if ((PCI_VENDOR(pa->pa_id) == PCI_VENDOR_RISCOM)
&& (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_RISCOM_N2))
return 1;
return 0;
}
static void
ntwoc_pci_attach(struct device *parent, struct device *self, void *aux)
{
struct ntwoc_pci_softc *sc = (void *)self;
struct pci_attach_args *pa = aux;
struct sca_softc *sca = &sc->sc_sca;
pci_intr_handle_t ih;
const char *intrstr;
pcireg_t csr;
u_int8_t tmc, rdiv, tdiv;
u_int16_t frontend_cr;
u_int16_t db0, db1;
u_int32_t flags;
u_int numports;
printf(": N2 Serial Interface\n");
flags = device_cfdata(&sc->sc_dev)->cf_flags;
/*
* Map in the ASIC configuration space
*/
if (pci_mapreg_map(pa, PCI_CBMA_ASIC, PCI_MAPREG_TYPE_MEM, 0,
&sc->sc_asic_iot, &sc->sc_asic_ioh, NULL, NULL)) {
aprint_error_dev(&sc->sc_dev, "Can't map register space (ASIC)\n");
return;
}
/*
* Map in the serial controller configuration space
*/
if (pci_mapreg_map(pa, PCI_CBMA_SCA, PCI_MAPREG_TYPE_MEM, 0,
&sca->sc_iot, &sca->sc_ioh, NULL, NULL)) {
aprint_error_dev(&sc->sc_dev, "Can't map register space (SCA)\n");
return;
}
/*
* Enable the card
*/
csr = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, csr);
/*
* Map and establish the interrupt
*/
if (pci_intr_map(pa, &ih)) {
aprint_error_dev(&sc->sc_dev, "couldn't map interrupt\n");
return;
}
intrstr = pci_intr_string(pa->pa_pc, ih);
sc->sc_ih = pci_intr_establish(pa->pa_pc, ih, IPL_NET, ntwoc_pci_intr,
sc);
if (sc->sc_ih == NULL) {
aprint_error_dev(&sc->sc_dev, "couldn't establish interrupt");
if (intrstr != NULL)
printf(" at %s", intrstr);
printf("\n");
return;
}
printf("%s: interrupting at %s\n", device_xname(&sc->sc_dev), intrstr);
/*
* Perform total black magic. This is not only extremely
* disgusting, but it should be explained a lot more in the
* card's documentation.
*
* From what I gather, this does nothing more than configure the
* PCI to ISA translator ASIC the N2pci card uses.
*
* From the FreeBSD driver:
* offset
* 0x00 - Map Range - Mem-mapped to locate anywhere
* 0x04 - Re-Map - PCI address decode enable
* 0x18 - Bus Region - 32-bit bus, ready enable
* 0x1c - Master Range - include all 16 MB
* 0x20 - Master RAM - Map SCA Base at 0
* 0x28 - Master Remap - direct master memory enable
* 0x68 - Interrupt - Enable interrupt (0 to disable)
*/
bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
0x00, 0xfffff000);
bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
0x04, 1);
bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
0x18, 0x40030043);
bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
0x1c, 0xff000000);
bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
0x20, 0);
bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
0x28, 0xe9);
bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
0x68, 0x10900);
/*
* pass the DMA tag to the SCA
*/
sca->sc_usedma = 1;
sca->scu_dmat = pa->pa_dmat;
/*
* Read the configuration information off the daughter card.
*/
frontend_cr = bus_space_read_2(sca->sc_iot, sca->sc_ioh, NTWOC_FECR);
NTWO_DPRINTF(("%s: frontend_cr = 0x%04x\n",
device_xname(&sc->sc_dev), frontend_cr));
db0 = (frontend_cr & NTWOC_FECR_ID0) >> NTWOC_FECR_ID0_SHIFT;
db1 = (frontend_cr & NTWOC_FECR_ID1) >> NTWOC_FECR_ID1_SHIFT;
/*
* Port 1 HAS to be present. If it isn't, don't attach anything.
*/
if (db0 == NTWOC_FE_ID_NONE) {
printf("%s: no ports available\n", device_xname(&sc->sc_dev));
return;
}
/*
* Port 1 is present. Now, check to see if port 2 is also
* present.
*/
numports = 1;
if (db1 != NTWOC_FE_ID_NONE)
numports++;
printf("%s: %d port%s\n", device_xname(&sc->sc_dev), numports,
(numports > 1 ? "s" : ""));
printf("%s: port 0 interface card: %s\n", device_xname(&sc->sc_dev),
ntwoc_pci_db_names[db0]);
if (numports > 1)
printf("%s: port 1 interface card: %s\n", device_xname(&sc->sc_dev),
ntwoc_pci_db_names[db1]);
/*
* enable the RS422 tristate transmit
* diable clock output (use receiver clock for both)
*/
frontend_cr |= (NTWOC_FECR_TE0 | NTWOC_FECR_TE1);
frontend_cr &= ~(NTWOC_FECR_ETC0 | NTWOC_FECR_ETC1);
bus_space_write_2(sc->sc_sca.sc_iot, sc->sc_sca.sc_ioh,
NTWOC_FECR, frontend_cr);
/*
* initialize the SCA. This will allocate DMAable memory based
* on the number of ports we passed in, the size of each
* buffer, and the number of buffers per port.
*/
sca->sc_parent = &sc->sc_dev;
sca->sc_read_1 = ntwoc_pci_sca_read_1;
sca->sc_read_2 = ntwoc_pci_sca_read_2;
sca->sc_write_1 = ntwoc_pci_sca_write_1;
sca->sc_write_2 = ntwoc_pci_sca_write_2;
sca->sc_dtr_callback = ntwoc_pci_dtr_callback;
sca->sc_clock_callback = ntwoc_pci_clock_callback;
sca->sc_aux = sc;
sca->sc_numports = numports;
/*
* get clock information from user
*/
rdiv = (flags & NTWOC_FLAGS_RXDIV_MASK) >> NTWOC_FLAGS_RXDIV_SHIFT;
if (rdiv > 9)
panic("bad rx divisor in flags");
tdiv = (flags & NTWOC_FLAGS_TXDIV_MASK) >> NTWOC_FLAGS_TXDIV_SHIFT;
if (tdiv > 9)
panic("bad tx divisor in flags");
tmc = (flags & NTWOC_FLAGS_TMC_MASK) >> NTWOC_FLAGS_TMC_SHIFT;
ntwoc_pci_get_clock(&sca->sc_ports[0], flags & NTWOC_FLAGS_CLK0_MASK,
tmc, rdiv, tdiv);
if (sca->sc_numports > 1)
ntwoc_pci_get_clock(&sca->sc_ports[1],
(flags & NTWOC_FLAGS_CLK1_MASK) >> NTWOC_FLAGS_CLK1_SHIFT,
tmc, rdiv, tdiv);
/* allocate DMA'able memory for card to use */
ntwoc_pci_alloc_dma(sca);
ntwoc_pci_setup_dma(sca);
sca_init(sca);
/*
* always initialize port 0, since we have to have found it to
* get this far. If we have two ports, attach the second
* as well.
*/
sca_port_attach(sca, 0);
if (numports == 2)
sca_port_attach(sca, 1);
/*
* Add shutdown hook so that DMA is disabled prior to reboot. Not
* doing do could allow DMA to corrupt kernel memory during the
* reboot before the driver initializes.
*/
shutdownhook_establish(ntwoc_pci_shutdown, sc);
#if __NetBSD_Version__ >= 104160000
/*
* defer getting the base clock until interrupts are enabled
* (and thus we have microtime())
*/
config_interrupts(self, ntwoc_pci_config_interrupts);
#else
sca->sc_baseclock = SCA_BASECLOCK;
sca_print_clock_info(&sc->sc_sca);
#endif
}
/*
* extract the clock information for a port from the flags field
*/
static void
ntwoc_pci_get_clock(struct sca_port *scp, u_int8_t flags, u_int8_t tmc,
u_int8_t rdiv, u_int8_t tdiv)
{
scp->sp_eclock =
(flags & NTWOC_FLAGS_ECLOCK_MASK) >> NTWOC_FLAGS_ECLOCK_SHIFT;
scp->sp_rxs = rdiv;
scp->sp_txs = tdiv;
scp->sp_tmc = tmc;
/* get rx source */
switch ((flags & NTWOC_FLAGS_RXS_MASK) >> NTWOC_FLAGS_RXS_SHIFT) {
case NTWOC_FLAGS_RXS_LINE:
scp->sp_rxs = 0;
break;
case NTWOC_FLAGS_RXS_LINE_SN:
scp->sp_rxs |= SCA_RXS_CLK_LINE_SN;
break;
case NTWOC_FLAGS_RXS_INTERNAL:
scp->sp_rxs |= SCA_RXS_CLK_INTERNAL;
break;
case NTWOC_FLAGS_RXS_ADPLL_OUT:
scp->sp_rxs |= SCA_RXS_CLK_ADPLL_OUT;
break;
case NTWOC_FLAGS_RXS_ADPLL_IN:
scp->sp_rxs |= SCA_RXS_CLK_ADPLL_IN;
break;
default:
panic("bad rx source in flags");
}
/* get tx source */
switch ((flags & NTWOC_FLAGS_TXS_MASK) >> NTWOC_FLAGS_TXS_SHIFT) {
case NTWOC_FLAGS_TXS_LINE:
scp->sp_txs = 0;
break;
case NTWOC_FLAGS_TXS_INTERNAL:
scp->sp_txs |= SCA_TXS_CLK_INTERNAL;
break;
case NTWOC_FLAGS_TXS_RXCLOCK:
scp->sp_txs |= SCA_TXS_CLK_RXCLK;
break;
default:
panic("bad rx source in flags");
}
}
static int
ntwoc_pci_intr(void *arg)
{
struct ntwoc_pci_softc *sc = (struct ntwoc_pci_softc *)arg;
return sca_hardintr(&sc->sc_sca);
}
/*
* shut down interrupts and DMA, so we don't trash the kernel on warm
* boot. Also, lower DTR on each port and disable card interrupts.
*/
static void
ntwoc_pci_shutdown(void *aux)
{
struct ntwoc_pci_softc *sc = aux;
u_int16_t fecr;
/*
* shut down the SCA ports
*/
sca_shutdown(&sc->sc_sca);
/*
* disable interrupts for the whole card. Black magic, see comment
* above.
*/
bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
0x68, 0x10900);
/*
* lower DTR on both ports
*/
fecr = bus_space_read_2(sc->sc_sca.sc_iot,
sc->sc_sca.sc_ioh, NTWOC_FECR);
fecr |= (NTWOC_FECR_DTR0 | NTWOC_FECR_DTR1);
bus_space_write_2(sc->sc_sca.sc_iot, sc->sc_sca.sc_ioh,
NTWOC_FECR, fecr);
}
static void
ntwoc_pci_dtr_callback(void *aux, int port, int state)
{
struct ntwoc_pci_softc *sc = aux;
u_int16_t fecr;
fecr = bus_space_read_2(sc->sc_sca.sc_iot,
sc->sc_sca.sc_ioh, NTWOC_FECR);
NTWO_DPRINTF(("dtr: port == %d, state == %d, old fecr: 0x%04x\n",
port, state, fecr));
if (port == 0) {
if (state == 0)
fecr |= NTWOC_FECR_DTR0;
else
fecr &= ~NTWOC_FECR_DTR0;
} else {
if (state == 0)
fecr |= NTWOC_FECR_DTR1;
else
fecr &= ~NTWOC_FECR_DTR1;
}
NTWO_DPRINTF(("new fecr: 0x%04x\n", fecr));
bus_space_write_2(sc->sc_sca.sc_iot, sc->sc_sca.sc_ioh,
NTWOC_FECR, fecr);
}
static void
ntwoc_pci_clock_callback(void *aux, int port, int enable)
{
struct ntwoc_pci_softc *sc = aux;
u_int16_t fecr;
fecr = bus_space_read_2(sc->sc_sca.sc_iot,
sc->sc_sca.sc_ioh, NTWOC_FECR);
NTWO_DPRINTF(("clk: port == %d, enable == %d, old fecr: 0x%04x\n",
port, enable, fecr));
if (port == 0) {
if (enable)
fecr |= NTWOC_FECR_ETC0;
else
fecr &= ~NTWOC_FECR_ETC0;
} else {
if (enable)
fecr |= NTWOC_FECR_ETC1;
else
fecr &= ~NTWOC_FECR_ETC1;
}
NTWO_DPRINTF(("new fecr: 0x%04x\n", fecr));
bus_space_write_2(sc->sc_sca.sc_iot, sc->sc_sca.sc_ioh,
NTWOC_FECR, fecr);
}
static int
ntwoc_pci_alloc_dma(struct sca_softc *sc)
{
u_int allocsize;
int err;
int rsegs;
u_int bpp;
/* first initialize the number of descriptors */
sc->sc_ports[0].sp_nrxdesc = NTWOC_NrxBUFS;
sc->sc_ports[0].sp_ntxdesc = NTWOC_NtxBUFS;
if (sc->sc_numports == 2) {
sc->sc_ports[1].sp_nrxdesc = NTWOC_NrxBUFS;
sc->sc_ports[1].sp_ntxdesc = NTWOC_NtxBUFS;
}
NTWO_DPRINTF(("sizeof sca_desc_t: %d bytes\n", sizeof (sca_desc_t)));
bpp = sc->sc_numports * (NTWOC_NtxBUFS + NTWOC_NrxBUFS);
allocsize = bpp * (SCA_BSIZE + sizeof (sca_desc_t));
/*
* sanity checks:
*
* Check the total size of the data buffers, and so on. The total
* DMAable space needs to fit within a single 16M region, and the
* descriptors need to fit within a 64K region.
*/
if (allocsize > 16 * 1024 * 1024)
return 1;
if (bpp * sizeof (sca_desc_t) > 64 * 1024)
return 1;
sc->scu_allocsize = allocsize;
/*
* Allocate one huge chunk of memory.
*/
if (bus_dmamem_alloc(sc->scu_dmat,
allocsize,
SCA_DMA_ALIGNMENT,
SCA_DMA_BOUNDARY,
&sc->scu_seg, 1, &rsegs, BUS_DMA_NOWAIT) != 0) {
printf("Could not allocate DMA memory\n");
return 1;
}
NTWO_DPRINTF(("DMA memory allocated: %d bytes\n", allocsize));
if (bus_dmamem_map(sc->scu_dmat, &sc->scu_seg, 1, allocsize,
&sc->scu_dma_addr, BUS_DMA_NOWAIT) != 0) {
printf("Could not map DMA memory into kernel space\n");
return 1;
}
NTWO_DPRINTF(("DMA memory mapped\n"));
if (bus_dmamap_create(sc->scu_dmat, allocsize, 2,
allocsize, SCA_DMA_BOUNDARY,
BUS_DMA_NOWAIT, &sc->scu_dmam) != 0) {
printf("Could not create DMA map\n");
return 1;
}
NTWO_DPRINTF(("DMA map created\n"));
err = bus_dmamap_load(sc->scu_dmat, sc->scu_dmam, sc->scu_dma_addr,
allocsize, NULL, BUS_DMA_NOWAIT);
if (err != 0) {
printf("Could not load DMA segment: %d\n", err);
return 1;
}
NTWO_DPRINTF(("DMA map loaded\n"));
return 0;
}
/*
* Take the memory allocated with sca_alloc_dma() and divide it among the
* two ports.
*/
static void
ntwoc_pci_setup_dma(struct sca_softc *sc)
{
sca_port_t *scp0, *scp1;
u_int8_t *vaddr0;
u_int32_t paddr0;
u_long addroff;
/*
* remember the physical address to 24 bits only, since the upper
* 8 bits is programed into the device at a different layer.
*/
paddr0 = (sc->scu_dmam->dm_segs[0].ds_addr & 0x00ffffff);
vaddr0 = sc->scu_dma_addr;
/*
* if we have only one port it gets the full range. If we have
* two we need to do a little magic to divide things up.
*
* The descriptors will all end up in the front of the area, while
* the remainder of the buffer is used for transmit and receive
* data.
*
* -------------------- start of memory
* tx desc port 0
* rx desc port 0
* tx desc port 1
* rx desc port 1
* tx buffer port 0
* rx buffer port 0
* tx buffer port 1
* rx buffer port 1
* -------------------- end of memory
*/
scp0 = &sc->sc_ports[0];
scp1 = &sc->sc_ports[1];
scp0->sp_txdesc_p = paddr0;
scp0->sp_txdesc = (sca_desc_t *)vaddr0;
addroff = sizeof(sca_desc_t) * scp0->sp_ntxdesc;
/*
* point to the range following the tx descriptors, and
* set the rx descriptors there.
*/
scp0->sp_rxdesc_p = paddr0 + addroff;
scp0->sp_rxdesc = (sca_desc_t *)(vaddr0 + addroff);
addroff += sizeof(sca_desc_t) * scp0->sp_nrxdesc;
if (sc->sc_numports == 2) {
scp1->sp_txdesc_p = paddr0 + addroff;
scp1->sp_txdesc = (sca_desc_t *)(vaddr0 + addroff);
addroff += sizeof(sca_desc_t) * scp1->sp_ntxdesc;
scp1->sp_rxdesc_p = paddr0 + addroff;
scp1->sp_rxdesc = (sca_desc_t *)(vaddr0 + addroff);
addroff += sizeof(sca_desc_t) * scp1->sp_nrxdesc;
}
/*
* point to the memory following the descriptors, and set the
* transmit buffer there.
*/
scp0->sp_txbuf_p = paddr0 + addroff;
scp0->sp_txbuf = vaddr0 + addroff;
addroff += SCA_BSIZE * scp0->sp_ntxdesc;
/*
* lastly, skip over the transmit buffer and set up pointers into
* the receive buffer.
*/
scp0->sp_rxbuf_p = paddr0 + addroff;
scp0->sp_rxbuf = vaddr0 + addroff;
addroff += SCA_BSIZE * scp0->sp_nrxdesc;
if (sc->sc_numports == 2) {
scp1->sp_txbuf_p = paddr0 + addroff;
scp1->sp_txbuf = vaddr0 + addroff;
addroff += SCA_BSIZE * scp1->sp_ntxdesc;
scp1->sp_rxbuf_p = paddr0 + addroff;
scp1->sp_rxbuf = vaddr0 + addroff;
addroff += SCA_BSIZE * scp1->sp_nrxdesc;
}
/*
* as a consistancy check, addroff should be equal to the allocation
* size.
*/
if (sc->scu_allocsize != addroff)
printf("ERROR: scu_allocsize != addroff: %lu != %lu\n",
(u_long)sc->scu_allocsize, addroff);
}
#if __NetBSD_Version__ >= 104160000
static void
ntwoc_pci_config_interrupts(struct device *self)
{
struct ntwoc_pci_softc *sc;
sc = (void *)self;
sca_get_base_clock(&sc->sc_sca);
sca_print_clock_info(&sc->sc_sca);
}
#endif
Reference in New Issue View Git Blame Copy Permalink