324 lines
8.7 KiB
C
324 lines
8.7 KiB
C
/* $NetBSD: dpt_isa.c,v 1.11 2002/12/07 19:48:31 ad Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1999, 2000, 2001 Andrew Doran <ad@netbsd.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* ISA front-end for DPT EATA SCSI driver.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: dpt_isa.c,v 1.11 2002/12/07 19:48:31 ad Exp $");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/device.h>
|
|
#include <sys/queue.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/intr.h>
|
|
|
|
#include <dev/scsipi/scsipi_all.h>
|
|
#include <dev/scsipi/scsiconf.h>
|
|
|
|
#include <dev/isa/isareg.h>
|
|
#include <dev/isa/isavar.h>
|
|
|
|
#include <dev/isa/isadmareg.h>
|
|
#include <dev/isa/isadmavar.h>
|
|
|
|
#include <dev/ic/dptreg.h>
|
|
#include <dev/ic/dptvar.h>
|
|
|
|
#include <dev/i2o/dptivar.h>
|
|
|
|
#define DPT_ISA_IOSIZE 16
|
|
#define DPT_ISA_MAXCCBS 16
|
|
|
|
static void dpt_isa_attach(struct device *, struct device *, void *);
|
|
static int dpt_isa_match(struct device *, struct cfdata *, void *);
|
|
static int dpt_isa_probe(struct isa_attach_args *, int);
|
|
static int dpt_isa_wait(bus_space_handle_t, bus_space_tag_t, u_int8_t,
|
|
u_int8_t);
|
|
|
|
CFATTACH_DECL(dpt_isa, sizeof(struct dpt_softc),
|
|
dpt_isa_match, dpt_isa_attach, NULL, NULL);
|
|
|
|
/* Try 'less intrusive' addresses first */
|
|
static const int dpt_isa_iobases[] = { 0x230, 0x330, 0x1f0, 0x170, 0 };
|
|
|
|
/*
|
|
* Wait for the HBA status register to reach a specific state.
|
|
*/
|
|
static int
|
|
dpt_isa_wait(bus_space_handle_t ioh, bus_space_tag_t iot, u_int8_t mask,
|
|
u_int8_t state)
|
|
{
|
|
int ms;
|
|
|
|
for (ms = 2000 * 10; ms; ms--) {
|
|
if ((bus_space_read_1(iot, ioh, HA_STATUS) & mask) == state)
|
|
return (0);
|
|
DELAY(100);
|
|
}
|
|
|
|
return (-1);
|
|
}
|
|
|
|
/*
|
|
* Match a supported board.
|
|
*/
|
|
static int
|
|
dpt_isa_match(struct device *parent, struct cfdata *match, void *aux)
|
|
{
|
|
struct isa_attach_args *ia = aux;
|
|
int i;
|
|
|
|
if (ia->ia_nio < 1)
|
|
return (0);
|
|
if (ia->ia_nirq < 1)
|
|
return (0);
|
|
if (ia->ia_ndrq < 1)
|
|
return (0);
|
|
|
|
if (ISA_DIRECT_CONFIG(ia))
|
|
return (0);
|
|
|
|
if (ia->ia_io[0].ir_addr != ISACF_PORT_DEFAULT)
|
|
return (dpt_isa_probe(ia, ia->ia_io[0].ir_addr));
|
|
|
|
for (i = 0; dpt_isa_iobases[i] != 0; i++) {
|
|
if (dpt_isa_probe(ia, dpt_isa_iobases[i])) {
|
|
ia->ia_io[0].ir_addr = dpt_isa_iobases[i];
|
|
return (1);
|
|
}
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Probe for a supported board.
|
|
*/
|
|
static int
|
|
dpt_isa_probe(struct isa_attach_args *ia, int iobase)
|
|
{
|
|
struct eata_cfg ec;
|
|
bus_space_handle_t ioh;
|
|
bus_space_tag_t iot;
|
|
int i, j, stat, irq, drq;
|
|
u_int16_t *p;
|
|
|
|
iot = ia->ia_iot;
|
|
|
|
if (bus_space_map(iot, iobase, DPT_ISA_IOSIZE, 0, &ioh) != 0)
|
|
return(0);
|
|
|
|
/*
|
|
* Assumuing the DPT BIOS reset the board, we shouldn't need to
|
|
* re-do it here. The tests below should weed out non-EATA devices
|
|
* before we start poking any registers.
|
|
*/
|
|
for (i = 1000; i; i--) {
|
|
if ((bus_space_read_1(iot, ioh, HA_STATUS) & HA_ST_READY) != 0)
|
|
break;
|
|
DELAY(2000);
|
|
}
|
|
|
|
if (i == 0)
|
|
goto bad;
|
|
|
|
while((((stat = bus_space_read_1(iot, ioh, HA_STATUS))
|
|
!= (HA_ST_READY|HA_ST_SEEK_COMPLETE))
|
|
&& (stat != (HA_ST_READY|HA_ST_SEEK_COMPLETE|HA_ST_ERROR))
|
|
&& (stat != (HA_ST_READY|HA_ST_SEEK_COMPLETE|HA_ST_ERROR|HA_ST_DRQ)))
|
|
|| (dpt_isa_wait(ioh, iot, HA_ST_BUSY, 0)))
|
|
/* RAID drives still spinning up? */
|
|
if (bus_space_read_1(iot, ioh, HA_ERROR) != 'D' ||
|
|
bus_space_read_1(iot, ioh, HA_ERROR + 1) != 'P' ||
|
|
bus_space_read_1(iot, ioh, HA_ERROR + 2) != 'T')
|
|
goto bad;
|
|
|
|
/*
|
|
* At this point we can be confident that we are dealing with a DPT
|
|
* HBA. Issue the read-config command and wait for the data to
|
|
* appear. XXX We shouldn't be doing this with PIO, but it makes it
|
|
* a lot easier as no DMA setup is required.
|
|
*/
|
|
bus_space_write_1(iot, ioh, HA_COMMAND, CP_PIO_GETCFG);
|
|
memset(&ec, 0, sizeof(ec));
|
|
i = ((int)&((struct eata_cfg *)0)->ec_cfglen +
|
|
sizeof(ec.ec_cfglen)) >> 1;
|
|
p = (u_int16_t *)&ec;
|
|
|
|
if (dpt_isa_wait(ioh, iot, 0xFF, HA_ST_DATA_RDY))
|
|
goto bad;
|
|
|
|
/* Begin reading */
|
|
while (i--)
|
|
*p++ = bus_space_read_stream_2(iot, ioh, HA_DATA);
|
|
|
|
if ((i = ec.ec_cfglen) > (sizeof(struct eata_cfg)
|
|
- (int)(&(((struct eata_cfg *)0L)->ec_cfglen))
|
|
- sizeof(ec.ec_cfglen)))
|
|
i = sizeof(struct eata_cfg)
|
|
- (int)(&(((struct eata_cfg *)0L)->ec_cfglen))
|
|
- sizeof(ec.ec_cfglen);
|
|
|
|
j = i + (int)(&(((struct eata_cfg *)0L)->ec_cfglen)) +
|
|
sizeof(ec.ec_cfglen);
|
|
i >>= 1;
|
|
|
|
while (i--)
|
|
*p++ = bus_space_read_stream_2(iot, ioh, HA_DATA);
|
|
|
|
/* Flush until we have read 512 bytes. */
|
|
i = (512 - j + 1) >> 1;
|
|
while (i--)
|
|
bus_space_read_stream_2(iot, ioh, HA_DATA);
|
|
|
|
/* Puke if we don't like the returned configuration data. */
|
|
if ((bus_space_read_1(iot, ioh, HA_STATUS) & HA_ST_ERROR) != 0 ||
|
|
memcmp(ec.ec_eatasig, "EATA", 4) != 0 ||
|
|
(ec.ec_feat0 & (EC_F0_HBA_VALID | EC_F0_DMA_SUPPORTED)) !=
|
|
(EC_F0_HBA_VALID | EC_F0_DMA_SUPPORTED))
|
|
goto bad;
|
|
|
|
/*
|
|
* Which DMA channel to use: if it was hardwired in the kernel
|
|
* configuration, use that value. If the HBA told us, use that
|
|
* value. Otherwise, puke.
|
|
*/
|
|
if ((drq = ia->ia_drq[0].ir_drq) == ISACF_DRQ_DEFAULT) {
|
|
int dmanum = ((ec.ec_feat1 & EC_F1_DMA_NUM_MASK) >>
|
|
EC_F1_DMA_NUM_SHIFT);
|
|
|
|
if ((ec.ec_feat0 & EC_F0_DMA_NUM_VALID) == 0 || dmanum > 3)
|
|
goto bad;
|
|
drq = "\0\7\6\5"[dmanum];
|
|
}
|
|
|
|
/*
|
|
* Which IRQ to use: if it was hardwired in the kernel configuration,
|
|
* use that value. Otherwise, use what the HBA told us.
|
|
*/
|
|
if ((irq = ia->ia_irq[0].ir_irq) == ISACF_IRQ_DEFAULT)
|
|
irq = ((ec.ec_feat1 & EC_F1_IRQ_NUM_MASK) >>
|
|
EC_F1_IRQ_NUM_SHIFT);
|
|
|
|
ia->ia_nio = 1;
|
|
ia->ia_io[0].ir_size = DPT_ISA_IOSIZE;
|
|
|
|
ia->ia_nirq = 1;
|
|
ia->ia_irq[0].ir_irq = irq;
|
|
|
|
ia->ia_ndrq = 1;
|
|
ia->ia_drq[0].ir_drq = drq;
|
|
|
|
ia->ia_niomem = 0;
|
|
|
|
bus_space_unmap(iot, ioh, DPT_ISA_IOSIZE);
|
|
return (1);
|
|
bad:
|
|
bus_space_unmap(iot, ioh, DPT_ISA_IOSIZE);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Attach a matched board.
|
|
*/
|
|
static void
|
|
dpt_isa_attach(struct device *parent, struct device *self, void *aux)
|
|
{
|
|
struct isa_attach_args *ia;
|
|
isa_chipset_tag_t ic;
|
|
bus_space_handle_t ioh;
|
|
bus_space_tag_t iot;
|
|
struct dpt_softc *sc;
|
|
struct eata_cfg *ec;
|
|
int error;
|
|
|
|
ia = aux;
|
|
sc = (struct dpt_softc *)self;
|
|
iot = ia->ia_iot;
|
|
ic = ia->ia_ic;
|
|
|
|
printf(": ");
|
|
|
|
if ((error = bus_space_map(iot, ia->ia_io[0].ir_addr, DPT_ISA_IOSIZE,
|
|
0, &ioh)) != 0) {
|
|
printf("can't map i/o space, error = %d\n", error);
|
|
return;
|
|
}
|
|
|
|
sc->sc_iot = iot;
|
|
sc->sc_ioh = ioh;
|
|
sc->sc_dmat = ia->ia_dmat;
|
|
|
|
if ((error = isa_dmacascade(ic, ia->ia_drq[0].ir_drq)) != 0) {
|
|
printf("unable to cascade DRQ, error = %d\n", error);
|
|
return;
|
|
}
|
|
|
|
/* Establish the interrupt. */
|
|
sc->sc_ih = isa_intr_establish(ic, ia->ia_irq[0].ir_irq, IST_EDGE,
|
|
IPL_BIO, dpt_intr, sc);
|
|
if (sc->sc_ih == NULL) {
|
|
printf("can't establish interrupt\n");
|
|
return;
|
|
}
|
|
|
|
if (dpt_readcfg(sc)) {
|
|
printf("readcfg failed - see dpt(4)\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Now attach to the bus-independent code. XXX We need to force
|
|
* parameters that aren't filled in by some ISA boards. In
|
|
* particular, due to the limited amount of memory we have to play
|
|
* with for DMA, clamp the number of CCBs to 16.
|
|
*/
|
|
ec = &sc->sc_ec;
|
|
|
|
if (be16toh(*(int16_t *)ec->ec_queuedepth) > DPT_ISA_MAXCCBS)
|
|
*(int16_t *)ec->ec_queuedepth = htobe16(DPT_ISA_MAXCCBS);
|
|
if (ec->ec_maxlun == 0)
|
|
ec->ec_maxlun = 7;
|
|
if ((ec->ec_feat3 & EC_F3_MAX_TARGET_MASK) >> EC_F3_MAX_TARGET_SHIFT
|
|
== 0)
|
|
ec->ec_feat3 = (ec->ec_feat3 & ~EC_F3_MAX_TARGET_MASK) |
|
|
(7 << EC_F3_MAX_TARGET_SHIFT);
|
|
|
|
sc->sc_bustype = SI_ISA_BUS;
|
|
sc->sc_isaport = ia->ia_io[0].ir_addr;
|
|
sc->sc_isairq = ia->ia_irq[0].ir_irq;
|
|
sc->sc_isadrq = ia->ia_drq[0].ir_drq;
|
|
|
|
dpt_init(sc, NULL);
|
|
}
|