50062f0914
- Cosmetic changes. - Shut down all HBAs "simultaneously", not individually. - Don't bother grokking HA_ST_MORE. It causes problems. - Other bits and pieces.
301 lines
12 KiB
C
301 lines
12 KiB
C
/* $NetBSD: dptreg.h,v 1.7 2000/02/24 18:47:55 ad Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1999 Andy Doran <ad@NetBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
#ifndef _IC_DPTREG_H_
|
|
#define _IC_DPTREG_H_ 1
|
|
|
|
/* Hardware limits */
|
|
#define DPT_MAX_TARGETS 16
|
|
#define DPT_MAX_LUNS 8
|
|
#define DPT_MAX_CHANNELS 3
|
|
|
|
/* Software parameters */
|
|
#define DPT_MAX_XFER ((DPT_SG_SIZE - 1) << PGSHIFT)
|
|
#define DPT_MAX_CCBS 256
|
|
#define DPT_SG_SIZE 64
|
|
#define DPT_ABORT_TIMEOUT 2000 /* milliseconds */
|
|
#define DPT_MORE_TIMEOUT 1000 /* microseconds */
|
|
#define DPT_SCRATCH_SIZE 256 /* bytes */
|
|
|
|
#ifdef _KERNEL
|
|
|
|
#define dpt_inb(x, o) \
|
|
bus_space_read_1((x)->sc_iot, (x)->sc_ioh, (o))
|
|
#define dpt_inw(x, o) \
|
|
le16toh(bus_space_read_2((x)->sc_iot, (x)->sc_ioh, (o)))
|
|
#define dpt_inl(x, o) \
|
|
le32toh(bus_space_read_4((x)->sc_iot, (x)->sc_ioh, (o)))
|
|
|
|
#define dpt_outb(x, o, d) \
|
|
bus_space_write_1((x)->sc_iot, (x)->sc_ioh, (o), (d))
|
|
#define dpt_outw(x, o, d) \
|
|
bus_space_write_2((x)->sc_iot, (x)->sc_ioh, (o), htole16(d))
|
|
#define dpt_outl(x, o, d) \
|
|
bus_space_write_4((x)->sc_iot, (x)->sc_ioh, (o), htole32(d))
|
|
|
|
#endif /* _KERNEL */
|
|
|
|
/*
|
|
* HBA registers
|
|
*/
|
|
#define HA_DATA 0
|
|
#define HA_ERROR 1
|
|
#define HA_DMA_BASE 2
|
|
#define HA_ICMD_CODE2 4
|
|
#define HA_ICMD_CODE1 5
|
|
#define HA_ICMD 6
|
|
|
|
/* EATA commands. There are many more that we don't define or use. */
|
|
#define HA_COMMAND 7
|
|
#define CP_PIO_GETCFG 0xf0 /* Read configuration data, PIO */
|
|
#define CP_PIO_CMD 0xf2 /* Execute command, PIO */
|
|
#define CP_DMA_GETCFG 0xfd /* Read configuration data, DMA */
|
|
#define CP_DMA_CMD 0xff /* Execute command, DMA */
|
|
#define CP_PIO_TRUNCATE 0xf4 /* Truncate transfer command, PIO */
|
|
#define CP_RESET 0xf9 /* Reset controller and SCSI bus */
|
|
#define CP_REBOOT 0x06 /* Reboot controller (last resort) */
|
|
#define CP_IMMEDIATE 0xfa /* EATA immediate command */
|
|
#define CPI_GEN_ABORT 0x00 /* Generic abort */
|
|
#define CPI_SPEC_RESET 0x01 /* Specific reset */
|
|
#define CPI_BUS_RESET 0x02 /* Bus reset */
|
|
#define CPI_SPEC_ABORT 0x03 /* Specific abort */
|
|
#define CPI_QUIET_INTR 0x04 /* ?? */
|
|
#define CPI_ROM_DL_EN 0x05 /* ?? */
|
|
#define CPI_COLD_BOOT 0x06 /* Cold boot HBA */
|
|
#define CPI_FORCE_IO 0x07 /* ?? */
|
|
#define CPI_BUS_OFFLINE 0x08 /* Set SCSI bus offline */
|
|
#define CPI_RESET_MSKD_BUS 0x09 /* Reset masked bus */
|
|
#define CPI_POWEROFF_WARN 0x0a /* Power about to fail */
|
|
|
|
#define HA_STATUS 7
|
|
#define HA_ST_ERROR 0x01
|
|
#define HA_ST_MORE 0x02
|
|
#define HA_ST_CORRECTD 0x04
|
|
#define HA_ST_DRQ 0x08
|
|
#define HA_ST_SEEK_COMPLETE 0x10
|
|
#define HA_ST_WRT_FLT 0x20
|
|
#define HA_ST_READY 0x40
|
|
#define HA_ST_BUSY 0x80
|
|
#define HA_ST_DATA_RDY (HA_ST_SEEK_COMPLETE|HA_ST_READY|HA_ST_DRQ)
|
|
|
|
#define HA_AUX_STATUS 8
|
|
#define HA_AUX_BUSY 0x01
|
|
#define HA_AUX_INTR 0x02
|
|
|
|
/*
|
|
* Structure of an EATA command packet.
|
|
*/
|
|
struct eata_cp {
|
|
u_int8_t cp_ctl0; /* Control flags 0 */
|
|
u_int8_t cp_senselen; /* Request sense length */
|
|
u_int8_t cp_unused0[3]; /* Unused */
|
|
u_int8_t cp_ctl1; /* Control flags 1 */
|
|
u_int8_t cp_ctl2; /* Control flags 2 */
|
|
u_int8_t cp_ctl3; /* Control flags 3 */
|
|
u_int8_t cp_ctl4; /* Control flags 4 */
|
|
u_int8_t cp_msg[3]; /* Message bytes 0-3 */
|
|
u_int8_t cp_cdb_cmd; /* SCSI CDB */
|
|
u_int8_t cp_cdb_more0[3]; /* SCSI CDB */
|
|
u_int8_t cp_cdb_len; /* SCSI CDB */
|
|
u_int8_t cp_cdb_more1[7]; /* SCSI CDB */
|
|
u_int32_t cp_datalen; /* Bytes of data/SG list */
|
|
u_int32_t cp_ccbid; /* ID of software CCB */
|
|
u_int32_t cp_dataaddr; /* Addr of data/SG list */
|
|
u_int32_t cp_stataddr; /* Addr of status packet */
|
|
u_int32_t cp_senseaddr; /* Addr of req. sense */
|
|
};
|
|
|
|
#define CP_C0_SCSI_RESET 0x01 /* Cause a bus reset */
|
|
#define CP_C0_HBA_INIT 0x02 /* Reinitialize HBA */
|
|
#define CP_C0_AUTO_SENSE 0x04 /* Auto request sense on error */
|
|
#define CP_C0_SCATTER 0x08 /* Do scatter/gather I/O */
|
|
#define CP_C0_QUICK 0x10 /* Return no status packet */
|
|
#define CP_C0_INTERPRET 0x20 /* HBA interprets SCSI CDB */
|
|
#define CP_C0_DATA_OUT 0x40 /* Data out phase */
|
|
#define CP_C0_DATA_IN 0x80 /* Data in phase */
|
|
|
|
#define CP_C1_TO_PHYS 0x01 /* Send to RAID component */
|
|
#define CP_C1_RESERVED 0xfe
|
|
|
|
#define CP_C2_PHYS_UNIT 0x01 /* Physical unit on mirrored pair */
|
|
#define CP_C2_NO_AT 0x02 /* No address translation */
|
|
#define CP_C2_NO_CACHE 0x04 /* No HBA caching */
|
|
#define CP_C2_RESERVED 0xf8
|
|
|
|
#define CP_C3_ID_MASK 0x1f /* Target ID */
|
|
#define CP_C3_ID_SHIFT 0
|
|
#define CP_C3_CHANNEL_MASK 0xe0 /* Target channel */
|
|
#define CP_C3_CHANNEL_SHIFT 5
|
|
|
|
#define CP_C4_LUN_MASK 0x07 /* Target LUN */
|
|
#define CP_C4_LUN_SHIFT 0
|
|
#define CP_C4_RESERVED 0x18
|
|
#define CP_C4_LUN_TAR 0x20 /* CP is for target ROUTINE */
|
|
#define CP_C4_DIS_PRI 0x40 /* Give disconnect privilege */
|
|
#define CP_C4_IDENTIFY 0x80 /* Always true */
|
|
|
|
/*
|
|
* EATA status packet as returned by controller upon command completion. It
|
|
* contains status, message info and a handle on the initiating CCB.
|
|
*/
|
|
struct eata_sp {
|
|
u_int8_t sp_hba_status; /* Host adapter status */
|
|
u_int8_t sp_scsi_status; /* SCSI bus status */
|
|
u_int8_t sp_reserved[2]; /* Reserved */
|
|
u_int32_t sp_inv_residue; /* Bytes not transfered */
|
|
u_int32_t sp_ccbid; /* ID of software CCB */
|
|
u_int8_t sp_id_message;
|
|
u_int8_t sp_que_message;
|
|
u_int8_t sp_tag_message;
|
|
u_int8_t sp_messages[9];
|
|
};
|
|
|
|
/*
|
|
* HBA status as returned by status packet. Bit 7 signals end of command.
|
|
*/
|
|
#define SP_HBA_NO_ERROR 0x00 /* No error on command */
|
|
#define SP_HBA_ERROR_SEL_TO 0x01 /* Device selection timeout */
|
|
#define SP_HBA_ERROR_CMD_TO 0x02 /* Device command timeout */
|
|
#define SP_HBA_ERROR_RESET 0x03 /* SCSI bus was reset */
|
|
#define SP_HBA_INIT_POWERUP 0x04 /* Initial controller power up */
|
|
#define SP_HBA_UNX_BUSPHASE 0x05 /* Unexpected bus phase */
|
|
#define SP_HBA_UNX_BUS_FREE 0x06 /* Unexpected bus free */
|
|
#define SP_HBA_BUS_PARITY 0x07 /* SCSI bus parity error */
|
|
#define SP_HBA_SCSI_HUNG 0x08 /* SCSI bus hung */
|
|
#define SP_HBA_UNX_MSGRJCT 0x09 /* Unexpected message reject */
|
|
#define SP_HBA_RESET_STUCK 0x0a /* SCSI bus reset stuck */
|
|
#define SP_HBA_RSENSE_FAIL 0x0b /* Auto-request sense failed */
|
|
#define SP_HBA_PARITY 0x0c /* HBA memory parity error */
|
|
#define SP_HBA_ABORT_NA 0x0d /* CP aborted - not on bus */
|
|
#define SP_HBA_ABORTED 0x0e /* CP aborted - was on bus */
|
|
#define SP_HBA_RESET_NA 0x0f /* CP reset - not on bus */
|
|
#define SP_HBA_RESET 0x10 /* CP reset - was on bus */
|
|
#define SP_HBA_ECC 0x11 /* HBA memory ECC error */
|
|
#define SP_HBA_PCI_PARITY 0x12 /* PCI parity error */
|
|
#define SP_HBA_PCI_MASTER 0x13 /* PCI master abort */
|
|
#define SP_HBA_PCI_TARGET 0x14 /* PCI target abort */
|
|
#define SP_HBA_PCI_SIG_TARGET 0x15 /* PCI signalled target abort */
|
|
#define SP_HBA_ABORT 0x20 /* Software abort (too many retries) */
|
|
|
|
/*
|
|
* Scatter-gather list element.
|
|
*/
|
|
struct eata_sg {
|
|
u_int32_t sg_addr;
|
|
u_int32_t sg_len;
|
|
};
|
|
|
|
/*
|
|
* EATA configuration data as returned by HBA. XXX this is bogus - it
|
|
* doesn't sync up with the structure FreeBSD uses. [ad]
|
|
*/
|
|
struct eata_cfg {
|
|
u_int8_t ec_devtype;
|
|
u_int8_t ec_pagecode;
|
|
u_int8_t ec_reserved0;
|
|
u_int8_t ec_cfglen; /* Length in bytes past here */
|
|
u_int8_t ec_eatasig[4]; /* EATA signature */
|
|
u_int8_t ec_eataversion; /* EATA version number */
|
|
u_int8_t ec_feat0; /* First feature byte */
|
|
u_int8_t ec_padlength[2]; /* Pad bytes for PIO cmds */
|
|
u_int8_t ec_hba[4]; /* Host adapter SCSI IDs */
|
|
u_int8_t ec_cplen[4]; /* Command packet length */
|
|
u_int8_t ec_splen[4]; /* Status packet length */
|
|
u_int8_t ec_queuedepth[2]; /* Controller queue depth */
|
|
u_int8_t ec_reserved1[2];
|
|
u_int8_t ec_sglen[2]; /* Maximum s/g list size */
|
|
u_int8_t ec_feat1; /* 2nd feature byte */
|
|
u_int8_t ec_irq; /* IRQ address */
|
|
u_int8_t ec_feat2; /* 3rd feature byte */
|
|
u_int8_t ec_feat3; /* 4th feature byte */
|
|
u_int8_t ec_maxlun; /* Maximum LUN supported */
|
|
u_int8_t ec_feat4; /* 5th feature byte */
|
|
u_int8_t ec_raidnum; /* RAID host adapter humber */
|
|
};
|
|
|
|
#define EC_F0_OVERLAP_CMDS 0x01 /* Overlapped cmds supported */
|
|
#define EC_F0_TARGET_MODE 0x02 /* Target mode supported */
|
|
#define EC_F0_TRUNC_NOT_REC 0x04 /* Truncate cmd not supported */
|
|
#define EC_F0_MORE_SUPPORTED 0x08 /* More cmd supported */
|
|
#define EC_F0_DMA_SUPPORTED 0x10 /* DMA mode supported */
|
|
#define EC_F0_DMA_NUM_VALID 0x20 /* DMA channel field is valid */
|
|
#define EC_F0_ATA_DEV 0x40 /* This is an ATA device */
|
|
#define EC_F0_HBA_VALID 0x80 /* HBA field is valid */
|
|
|
|
#define EC_F1_IRQ_NUM_MASK 0x0f /* IRQ number mask */
|
|
#define EC_F1_IRQ_NUM_SHIFT 0
|
|
#define EC_F1_IRQ_TRIGGER 0x10 /* IRQ trigger: 0 = edge, 1 = level */
|
|
#define EC_F1_SECONDARY 0x20 /* Controller not at address 0x170 */
|
|
#define EC_F1_DMA_NUM_MASK 0xc0 /* DMA channel *index* for ISA */
|
|
#define EC_F1_DMA_NUM_SHIFT 6
|
|
|
|
#define EC_F2_ISA_IO_DISABLE 0x01 /* ISA I/O address disabled */
|
|
#define EC_F2_FORCE_ADDR 0x02 /* HBA forced to EISA/ISA address */
|
|
#define EC_F2_SG_64K 0x04 /* 64kB of scatter/gather space */
|
|
#define EC_F2_SG_UNALIGNED 0x08 /* Can do unaligned scatter/gather */
|
|
#define EC_F2_RESERVED0 0x10 /* Reserved */
|
|
#define EC_F2_RESERVED1 0x20 /* Reserved */
|
|
#define EC_F2_RESERVED2 0x40 /* Reserved */
|
|
#define EC_F2_RESERVED3 0x40 /* Reserved */
|
|
|
|
#define EC_F3_MAX_TARGET_MASK 0x1f /* Maximum target ID supported */
|
|
#define EC_F3_MAX_TARGET_SHIFT 0
|
|
#define EC_F3_MAX_CHANNEL_MASK 0xe0 /* Maximum channel ID supported */
|
|
#define EC_F3_MAX_CHANNEL_SHIFT 5
|
|
|
|
#define EC_F4_RESERVED0 0x01 /* Reserved */
|
|
#define EC_F4_RESERVED1 0x02 /* Reserved */
|
|
#define EC_F4_RESERVED2 0x04 /* Reserved */
|
|
#define EC_F4_AUTO_TERM 0x08 /* Supports auto termination */
|
|
#define EC_F4_PCIM1 0x10 /* PCI M1 chipset */
|
|
#define EC_F4_BOGUS_RAID_ID 0x20 /* RAID ID may be questionable */
|
|
#define EC_F4_HBA_PCI 0x40 /* PCI adapter */
|
|
#define EC_F4_HBA_EISA 0x80 /* EISA adapter */
|
|
|
|
/*
|
|
* How SCSI inquiry data breaks down for EATA boards.
|
|
*/
|
|
struct eata_inquiry_data {
|
|
u_int8_t ei_device;
|
|
u_int8_t ei_dev_qual2;
|
|
u_int8_t ei_version;
|
|
u_int8_t ei_response_format;
|
|
u_int8_t ei_additional_length;
|
|
u_int8_t ei_unused[2];
|
|
u_int8_t ei_flags;
|
|
char ei_vendor[8]; /* Vendor, e.g: DPT, NEC */
|
|
char ei_model[7]; /* Model number */
|
|
char ei_suffix[9]; /* Model number suffix */
|
|
char ei_fw[3]; /* Firmware */
|
|
char ei_fwrev[1]; /* Firmware revision */
|
|
u_int8_t ei_extra[8];
|
|
};
|
|
|
|
#endif /* !defined _IC_DPTREG_H_ */
|