NetBSD/sys/dev/tc/asc_ioasic.c

329 lines
8.6 KiB
C

/* $NetBSD: asc_ioasic.c,v 1.12 1998/01/12 09:51:30 thorpej Exp $ */
/*
* Copyright 1996 The Board of Trustees of The Leland Stanford
* Junior University. All Rights Reserved.
*
* Permission to use, copy, modify, and distribute this
* software and its documentation for any purpose and without
* fee is hereby granted, provided that the above copyright
* notice appear in all copies. Stanford University
* makes no representations about the suitability of this
* software for any purpose. It is provided "as is" without
* express or implied warranty.
*
*/
#define USE_CACHED_BUFFER 0
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <dev/tc/tcvar.h>
#include <dev/tc/ioasicvar.h>
#include <machine/autoconf.h>
#include <pmax/dev/device.h> /* XXX */
#include <pmax/dev/scsi.h> /* XXX */
#include <pmax/dev/ascreg.h> /* XXX */
#include <dev/tc/ascvar.h>
#include <machine/cpu.h>
#include <machine/bus.h> /* bus, cache consistency, etc */
/*XXX*/
#include <pmax/pmax/asic.h> /* XXX ioasic register defs? */
#include <pmax/pmax/kmin.h> /* XXX ioasic register defs? */
#include <pmax/pmax/pmaxtype.h>
extern int pmax_boardtype;
extern vm_offset_t kvtophys __P((vm_offset_t));
/*
* Autoconfiguration data for config.
*/
int asc_ioasic_match __P((struct device *, struct cfdata *, void *));
void asc_ioasic_attach __P((struct device *, struct device *, void *));
struct cfattach asc_ioasic_ca = {
sizeof(struct asc_softc), asc_ioasic_match, asc_ioasic_attach
};
#ifdef notdef
extern struct cfdriver asc_cd;
#endif
/*
* DMA callback declarations
*/
#ifdef ASC_IOASIC_BOUNCE
extern u_long asc_iomem;
#endif
static int
asic_dma_start __P((asc_softc_t asc, State *state, caddr_t cp, int flag,
int len, int off));
static void
asic_dma_end __P((asc_softc_t asc, State *state, int flag));
int
asc_ioasic_match(parent, match, aux)
struct device *parent;
struct cfdata *match;
void *aux;
{
struct ioasicdev_attach_args *d = aux;
void *ascaddr;
if (strncmp(d->iada_modname, "asc", TC_ROM_LLEN) &&
strncmp(d->iada_modname, "PMAZ-AA ", TC_ROM_LLEN))
return (0);
/* probe for chip */
ascaddr = (void*)d->iada_addr;
if (tc_badaddr(ascaddr + ASC_OFFSET_53C94))
return (0);
return (1);
}
void
asc_ioasic_attach(parent, self, aux)
struct device *parent;
struct device *self;
void *aux;
{
register struct ioasicdev_attach_args *d = aux;
register asc_softc_t asc = (asc_softc_t) self;
#ifdef ASC_IOASIC_BOUNCE
u_char *buff;
int i;
#endif
void *ascaddr;
int unit;
ascaddr = (void*)MIPS_PHYS_TO_KSEG1(d->iada_addr);
unit = asc->sc_dev.dv_unit;
/*
* Initialize hw descriptor, cache some pointers
*/
asc->regs = (asc_regmap_t *)(ascaddr + ASC_OFFSET_53C94);
/*
* Set up machine dependencies.
* (1) how to do dma
* (2) timing based on turbochannel frequency
*/
#ifdef ASC_IOASIC_BOUNCE
#if USE_CACHED_BUFFER
/* XXX Use cached address for DMA buffer to increase raw read speed */
buff = (u_char *)MIPS_PHYS_TO_KSEG0(asc_iomem);
#else
buff = (u_char *)MIPS_PHYS_TO_KSEG1(asc_iomem);
#endif /* USE_CACHED_BUFFER */
/*
* Statically partition the DMA buffer between targets.
* This way we will eventually be able to attach/detach
* drives on-fly. And 18k/target is plenty for normal use.
*/
/*
* Give each target its own DMA buffer region.
* We may want to try ping ponging buffers later.
*/
for (i = 0; i < ASC_NCMD; i++)
asc->st[i].dmaBufAddr = buff + 8192 * i;
#endif /* ASC_IOASIC_BOUNCE */
*((volatile int *)IOASIC_REG_SCSI_DMAPTR(ioasic_base)) = -1;
*((volatile int *)IOASIC_REG_SCSI_DMANPTR(ioasic_base)) = -1;
*((volatile int *)IOASIC_REG_SCSI_SCR(ioasic_base)) = 0;
asc->dma_start = asic_dma_start;
asc->dma_end = asic_dma_end;
/* digital meters show IOASIC 53c94s are clocked at approx 25MHz */
ascattach(asc, ASC_SPEED_25_MHZ);
/* tie pseudo-slot to device */
ioasic_intr_establish(parent, d->iada_cookie, TC_IPL_BIO,
asc_intr, asc);
}
/*
* DMA handling routines. For a turbochannel device, just set the dmar.
* For the I/O ASIC, handle the actual DMA interface.
*/
static int
asic_dma_start(asc, state, cp, flag, len, off)
asc_softc_t asc;
State *state;
caddr_t cp;
int flag;
int len;
int off;
{
register volatile u_int *ssr = (volatile u_int *)
IOASIC_REG_CSR(ioasic_base);
u_int phys, nphys;
/* stop DMA engine first */
*ssr &= ~IOASIC_CSR_DMAEN_SCSI;
*((volatile int *)IOASIC_REG_SCSI_SCR(ioasic_base)) = 0;
#ifndef ASC_IOASIC_BOUNCE
/* restrict len to the maximum the IOASIC can transfer */
if (len > ((caddr_t)mips_trunc_page(cp + NBPG * 2) - cp))
len = (caddr_t)mips_trunc_page(cp + NBPG * 2) - cp;
/* If R4K, writeback and invalidate the buffer */
if (CPUISMIPS3)
mips3_HitFlushDCache((vm_offset_t)cp, len);
/* Get physical address of buffer start, no next phys addr */
phys = (u_int)kvtophys((vm_offset_t)cp);
nphys = -1;
/* Compute 2nd DMA pointer only if next page is part of this I/O */
if ((NBPG - (phys & (NBPG - 1))) < len) {
cp = (caddr_t)mips_trunc_page(cp + NBPG);
nphys = (u_int)kvtophys((vm_offset_t)cp);
}
/* If not R4K, need to invalidate cache lines for both physical segments */
if (!CPUISMIPS3 && flag == ASCDMA_READ) {
MachFlushDCache(MIPS_PHYS_TO_KSEG0(phys),
nphys == 0xffffffff ? len : NBPG - (phys & (NBPG - 1)));
if (nphys != 0xffffffff)
MachFlushDCache(MIPS_PHYS_TO_KSEG0(nphys),
NBPG); /* XXX */
}
#else /* ASC_IOASIC_BOUNCE */
/* restrict len to the maximum the IOASIC can transfer */
if (len > ((caddr_t)mips_trunc_page(state->dmaBufAddr + off + NBPG * 2) - (caddr_t)(state->dmaBufAddr + off)))
len = (caddr_t)mips_trunc_page(state->dmaBufAddr + off + NBPG * 2) - (caddr_t)(state->dmaBufAddr + off);
if (flag == ASCDMA_WRITE)
bcopy(cp, state->dmaBufAddr + off, len);
cp = state->dmaBufAddr + off;
#if USE_CACHED_BUFFER
#ifdef MIPS3
/* If R4K, need to writeback the bounce buffer */
if (CPUISMIPS3)
mips3_HitFlushDCache((vm_offset_t)cp, len);
#endif /* MIPS3 */
phys = MIPS_KSEG0_TO_PHYS(cp);
cp = (caddr_t)mips_trunc_page(cp + NBPG);
nphys = MIPS_KSEG0_TO_PHYS(cp);
#else
phys = MIPS_KSEG1_TO_PHYS(cp);
cp = (caddr_t)mips_trunc_page(cp + NBPG);
nphys = MIPS_KSEG1_TO_PHYS(cp);
#endif /* USE_CACHED_BUFFER */
#endif /* ASC_IOASIC_BOUNCE */
#ifdef notyet
asc->dma_next = cp;
asc->dma_xfer = state->dmalen - (nphys - phys);
#endif
*(volatile int *)IOASIC_REG_SCSI_DMAPTR(ioasic_base) =
IOASIC_DMA_ADDR(phys);
*(volatile int *)IOASIC_REG_SCSI_DMANPTR(ioasic_base) =
IOASIC_DMA_ADDR(nphys);
if (flag == ASCDMA_READ)
*ssr |= IOASIC_CSR_SCSI_DIR | IOASIC_CSR_DMAEN_SCSI;
else
*ssr = (*ssr & ~IOASIC_CSR_SCSI_DIR) | IOASIC_CSR_DMAEN_SCSI;
wbflush();
return (len);
}
static void
asic_dma_end(asc, state, flag)
asc_softc_t asc;
State *state;
int flag;
{
register volatile u_int *ssr = (volatile u_int *)
IOASIC_REG_CSR(ioasic_base);
register volatile u_int *dmap = (volatile u_int *)
IOASIC_REG_SCSI_DMAPTR(ioasic_base);
register u_short *to;
register int w;
int nb;
*ssr &= ~IOASIC_CSR_DMAEN_SCSI;
#if USE_CACHED_BUFFER /* XXX - Should uncached address always be used? */
to = (u_short *)MIPS_PHYS_TO_KSEG0(*dmap >> 3);
#else
to = (u_short *)MIPS_PHYS_TO_KSEG1(*dmap >> 3);
#endif
*dmap = -1;
*((volatile int *)IOASIC_REG_SCSI_DMANPTR(ioasic_base)) = -1;
wbflush();
if (flag == ASCDMA_READ) {
#if !defined(ASC_IOASIC_BOUNCE) && USE_CACHED_BUFFER
/* Invalidate cache for the buffer */
#ifdef MIPS3
if (CPUISMIPS3)
MachFlushDCache(MIPS_KSEG1_TO_PHYS(state->dmaBufAddr),
state->dmalen);
else
#endif /* MIPS3 */
MachFlushDCache(MIPS_PHYS_TO_KSEG0(
MIPS_KSEG1_TO_PHYS(state->dmaBufAddr)),
state->dmalen);
#endif /* USE_CACHED_BUFFER */
if ( (nb = *((int *)IOASIC_REG_SCSI_SCR(ioasic_base))) != 0) {
/* pick up last upto6 bytes, sigh. */
/* Last byte really xferred is.. */
w = *(int *)IOASIC_REG_SCSI_SDR0(ioasic_base);
*to++ = w;
if (--nb > 0) {
w >>= 16;
*to++ = w;
}
if (--nb > 0) {
w = *(int *)IOASIC_REG_SCSI_SDR1(ioasic_base);
*to++ = w;
}
}
#ifdef ASC_IOASIC_BOUNCE
bcopy(state->dmaBufAddr, state->buf, state->dmalen);
#endif
}
}
#ifdef notdef
/*
* Called by asic_intr() for scsi dma pointer update interrupts.
*/
void
asc_dma_intr()
{
asc_softc_t asc = &asc_cd.cd_devs[0]; /*XXX*/
u_int next_phys;
asc->dma_xfer -= NBPG;
if (asc->dma_xfer <= -NBPG) {
volatile u_int *ssr = (volatile u_int *)
IOASIC_REG_CSR(ioasic_base);
*ssr &= ~IOASIC_CSR_DMAEN_SCSI;
} else {
asc->dma_next += NBPG;
next_phys = MIPS_KSEG0_TO_PHYS(asc->dma_next);
}
*(volatile int *)IOASIC_REG_SCSI_DMANPTR(ioasic_base) =
IOASIC_DMA_ADDR(next_phys);
wbflush();
}
#endif /*notdef*/