NetBSD/sys/arch/hp300/dev/dcareg.h

176 lines
5.2 KiB
C

/* $NetBSD: dcareg.h,v 1.6 1996/02/24 00:55:02 thorpej Exp $ */
/*
* Copyright (c) 1982, 1986, 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)dcareg.h 8.1 (Berkeley) 6/10/93
*/
#include <hp300/dev/iotypes.h> /* XXX */
#ifdef hp700
struct dcadevice {
vu_char dca_reset;
vu_char dca_pad[0x800-1];
vu_char dca_data; /* receive buf or xmit hold */
vu_char dca_ier; /* interrupt enable */
vu_char dca_iir; /* (RO) interrupt identify */
#define dca_fifo dca_iir /* (WO) FIFO control */
vu_char dca_cfcr; /* line control */
vu_char dca_mcr; /* modem control */
vu_char dca_lsr; /* line status */
vu_char dca_msr; /* modem status */
vu_char dca_scr; /* scratch pad */
};
#else
struct dcadevice {
/* card registers */
u_char dca_pad0;
vu_char dca_id; /* 0x01 (read) */
#define dca_reset dca_id /* 0x01 (write) */
u_char dca_pad1;
vu_char dca_ic; /* 0x03 */
u_char dca_pad2;
vu_char dca_ocbrc; /* 0x05 */
u_char dca_pad3;
vu_char dca_lcsm; /* 0x07 */
u_char dca_pad4[8];
/* chip registers */
u_char dca_pad5;
vu_char dca_data; /* 0x11 */
u_char dca_pad6;
vu_char dca_ier; /* 0x13 */
u_char dca_pad7;
vu_char dca_iir; /* 0x15 (read) */
#define dca_fifo dca_iir /* 0x15 (write) */
u_char dca_pad8;
vu_char dca_cfcr; /* 0x17 */
u_char dca_pad9;
vu_char dca_mcr; /* 0x19 */
u_char dca_padA;
vu_char dca_lsr; /* 0x1B */
u_char dca_padB;
vu_char dca_msr; /* 0x1D */
};
#endif
/* interface reset/id (300 only) */
#define DCAID0 0x02
#define DCAREMID0 0x82
#define DCAID1 0x42
#define DCAREMID1 0xC2
/* interrupt control (300 only) */
#define DCAIPL(x) ((((x) >> 4) & 3) + 3)
#define IC_IR 0x40
#define IC_IE 0x80
/*
* 16 bit baud rate divisor (lower byte in dca_data, upper in dca_ier)
* NB: This constant is for a 7.3728 clock frequency. The 300 clock
* frequency is 2.4576, giving a constant of 153600.
*/
#ifdef hp300
#define DCABRD(x) (153600 / (x))
#endif
#ifdef hp700
#define DCABRD(x) (460800 / (x))
#endif
/* interrupt enable register */
#define IER_ERXRDY 0x1
#define IER_ETXRDY 0x2
#define IER_ERLS 0x4
#define IER_EMSC 0x8
/* interrupt identification register */
#define IIR_IMASK 0xf
#define IIR_RXTOUT 0xc
#define IIR_RLS 0x6
#define IIR_RXRDY 0x4
#define IIR_TXRDY 0x2
#define IIR_NOPEND 0x1
#define IIR_MLSC 0x0
#define IIR_FIFO_MASK 0xc0 /* set if FIFOs are enabled */
/* fifo control register */
#define FIFO_ENABLE 0x01
#define FIFO_RCV_RST 0x02
#define FIFO_XMT_RST 0x04
#define FIFO_DMA_MODE 0x08
#define FIFO_TRIGGER_1 0x00
#define FIFO_TRIGGER_4 0x40
#define FIFO_TRIGGER_8 0x80
#define FIFO_TRIGGER_14 0xc0
/* character format control register */
#define CFCR_DLAB 0x80
#define CFCR_SBREAK 0x40
#define CFCR_PZERO 0x30
#define CFCR_PONE 0x20
#define CFCR_PEVEN 0x10
#define CFCR_PODD 0x00
#define CFCR_PENAB 0x08
#define CFCR_STOPB 0x04
#define CFCR_8BITS 0x03
#define CFCR_7BITS 0x02
#define CFCR_6BITS 0x01
#define CFCR_5BITS 0x00
/* modem control register */
#define MCR_LOOPBACK 0x10
#define MCR_IEN 0x08
#define MCR_DRS 0x04
#define MCR_RTS 0x02
#define MCR_DTR 0x01
/* line status register */
#define LSR_RCV_FIFO 0x80
#define LSR_TSRE 0x40
#define LSR_TXRDY 0x20
#define LSR_BI 0x10
#define LSR_FE 0x08
#define LSR_PE 0x04
#define LSR_OE 0x02
#define LSR_RXRDY 0x01
#define LSR_RCV_MASK 0x1f
/* modem status register */
#define MSR_DCD 0x80
#define MSR_RI 0x40
#define MSR_DSR 0x20
#define MSR_CTS 0x10
#define MSR_DDCD 0x08
#define MSR_TERI 0x04
#define MSR_DDSR 0x02
#define MSR_DCTS 0x01