1011 lines
26 KiB
C
1011 lines
26 KiB
C
/* $NetBSD: if_cons.c,v 1.13 2001/11/13 01:10:48 lukem Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1991, 1993
|
|
* The Regents of the University of California. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of
|
|
* California, Berkeley and its contributors.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @(#)if_cons.c 8.1 (Berkeley) 6/10/93
|
|
*/
|
|
|
|
/***********************************************************
|
|
Copyright IBM Corporation 1987
|
|
|
|
All Rights Reserved
|
|
|
|
Permission to use, copy, modify, and distribute this software and its
|
|
documentation for any purpose and without fee is hereby granted,
|
|
provided that the above copyright notice appear in all copies and that
|
|
both that copyright notice and this permission notice appear in
|
|
supporting documentation, and that the name of IBM not be
|
|
used in advertising or publicity pertaining to distribution of the
|
|
software without specific, written prior permission.
|
|
|
|
IBM DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
|
|
ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
|
|
IBM BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
|
|
ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
|
|
WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
|
|
ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
|
|
SOFTWARE.
|
|
|
|
******************************************************************/
|
|
|
|
/*
|
|
* ARGO Project, Computer Sciences Dept., University of Wisconsin - Madison
|
|
*/
|
|
/*
|
|
* cons.c - Connection Oriented Network Service:
|
|
* including support for a) user transport-level service,
|
|
* b) COSNS below CLNP, and c) CONS below TP.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(1, "$NetBSD: if_cons.c,v 1.13 2001/11/13 01:10:48 lukem Exp $");
|
|
|
|
#ifdef TPCONS
|
|
#ifdef _KERNEL
|
|
#ifdef ARGO_DEBUG
|
|
#define Static
|
|
unsigned LAST_CALL_PCB;
|
|
#else /* ARGO_DEBUG */
|
|
#define Static static
|
|
#endif /* ARGO_DEBUG */
|
|
|
|
#ifndef SOCK_STREAM
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/protosw.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/socketvar.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/ioctl.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/netisr.h>
|
|
#include <net/route.h>
|
|
|
|
#include <netiso/iso_errno.h>
|
|
#include <netiso/argo_debug.h>
|
|
#include <netiso/tp_trace.h>
|
|
#include <netiso/iso.h>
|
|
#include <netiso/cons.h>
|
|
#include <netiso/iso_pcb.h>
|
|
#include <netiso/iso_var.h>
|
|
#include <netiso/tp_var.h>
|
|
#include <netiso/clnp.h>
|
|
|
|
#include <netccitt/x25.h>
|
|
#include <netccitt/pk.h>
|
|
#include <netccitt/pk_var.h>
|
|
#include <netccitt/pk_extern.h>
|
|
#endif
|
|
|
|
#ifdef ARGO_DEBUG
|
|
#define MT_XCONN 0x50
|
|
#define MT_XCLOSE 0x51
|
|
#define MT_XCONFIRM 0x52
|
|
#define MT_XDATA 0x53
|
|
#define MT_XHEADER 0x54
|
|
#else
|
|
#define MT_XCONN MT_DATA
|
|
#define MT_XCLOSE MT_DATA
|
|
#define MT_XCONFIRM MT_DATA
|
|
#define MT_XDATA MT_DATA
|
|
#define MT_XHEADER MT_HEADER
|
|
#endif /* ARGO_DEBUG */
|
|
|
|
#define DONTCLEAR -1
|
|
|
|
/*********************************************************************
|
|
* cons.c - CONS interface to the x.25 layer
|
|
*
|
|
* TODO: figure out what resources we might run out of besides mbufs.
|
|
* If we run out of any of them (including mbufs) close and recycle
|
|
* lru x% of the connections, for some parameter x.
|
|
*
|
|
* There are 2 interfaces from above:
|
|
* 1) from TP0:
|
|
* cons CO network service
|
|
* TP associates a transport connection with a network connection.
|
|
* cons_output( isop, m, len, isdgm==0 )
|
|
* co_flags == 0
|
|
* 2) from TP4:
|
|
* It's a datagram service, like clnp is. - even though it calls
|
|
* cons_output( isop, m, len, isdgm==1 )
|
|
* it eventually goes through
|
|
* cosns_output(ifp, m, dst).
|
|
* TP4 permits multiplexing (reuse, possibly simultaneously) of the
|
|
* network connections.
|
|
* This means that many sockets (many tpcbs) may be associated with
|
|
* this pklcd, hence cannot have a back ptr from pklcd to a tpcb.
|
|
* co_flags & CONSF_DGM
|
|
* co_socket is null since there may be many sockets that use this pklcd.
|
|
* NOTE:
|
|
* streams would really be nice. sigh.
|
|
* NOTE:
|
|
* PVCs could be handled by config-ing a cons with an address and with the
|
|
* IFF_POINTTOPOINT flag on. This code would then have to skip the
|
|
* connection setup stuff for pt-to-pt links.
|
|
*
|
|
*********************************************************************/
|
|
|
|
|
|
#define CONS_IFQMAXLEN 5
|
|
|
|
Static int make_partial_x25_packet __P((struct isopcb *, struct pklcd *));
|
|
Static int NSAPtoDTE __P((struct sockaddr_iso *, struct sockaddr_x25 *));
|
|
Static int FACILtoNSAP __P((struct sockaddr_iso *, u_char *));
|
|
Static void init_siso __P((struct sockaddr_iso *));
|
|
Static int DTEtoNSAP __P((struct sockaddr_iso *, struct sockaddr_x25 *));
|
|
Static int parse_facil __P((struct pklcd *, struct isopcb *, caddr_t, u_char));
|
|
|
|
/* protosw pointers for getting to higher layer */
|
|
Static struct protosw *CLNP_proto;
|
|
Static struct protosw *TP_proto;
|
|
Static struct protosw *X25_proto;
|
|
|
|
extern struct isopcb tp_isopcb; /* chain of all TP pcbs */
|
|
|
|
|
|
#define HIGH_NIBBLE 1
|
|
#define LOW_NIBBLE 0
|
|
|
|
/*
|
|
* NAME: nibble_copy()
|
|
* FUNCTION and ARGUMENTS:
|
|
* copies (len) nibbles from (src_octet), high or low nibble
|
|
* to (dst_octet), high or low nibble,
|
|
* src_nibble & dst_nibble should be:
|
|
* HIGH_NIBBLE (1) if leftmost 4 bits/ most significant nibble
|
|
* LOW_NIBBLE (0) if rightmost 4 bits/ least significant nibble
|
|
* RETURNS: VOID
|
|
*/
|
|
void
|
|
nibble_copy(src_octet, src_nibble, dst_octet, dst_nibble, len)
|
|
char *src_octet;
|
|
char *dst_octet;
|
|
unsigned src_nibble;
|
|
unsigned dst_nibble;
|
|
int len;
|
|
{
|
|
|
|
int i;
|
|
unsigned dshift, sshift;
|
|
|
|
#ifdef ARGO_DEBUG
|
|
if (argo_debug[D_CADDR]) {
|
|
printf("nibble_copy ( 0x%x, 0x%x, 0x%x, 0x%x 0x%x)\n",
|
|
src_octet, src_nibble, dst_octet, dst_nibble, len);
|
|
}
|
|
#endif
|
|
#define SHIFT 0x4
|
|
|
|
dshift = dst_nibble << 2;
|
|
sshift = src_nibble << 2;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
/* clear dst_nibble */
|
|
*dst_octet &= ~(0xf << dshift);
|
|
|
|
/* set dst nibble */
|
|
*dst_octet |= (0xf & (*src_octet >> sshift)) << dshift;
|
|
|
|
dshift ^= SHIFT;
|
|
sshift ^= SHIFT;
|
|
src_nibble = 1 - src_nibble;
|
|
dst_nibble = 1 - dst_nibble;
|
|
src_octet += src_nibble;
|
|
dst_octet += dst_nibble;
|
|
}
|
|
#ifdef ARGO_DEBUG
|
|
if (argo_debug[D_CADDR]) {
|
|
printf("nibble_copy DONE\n");
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* NAME: nibble_match()
|
|
* FUNCTION and ARGUMENTS:
|
|
* compares src_octet/src_nibble and dst_octet/dst_nibble for len nibbles.
|
|
* RETURNS: 0 if they differ, 1 if they are the same.
|
|
*/
|
|
int
|
|
nibble_match(src_octet, src_nibble, dst_octet, dst_nibble, len)
|
|
char *src_octet;
|
|
char *dst_octet;
|
|
unsigned src_nibble;
|
|
unsigned dst_nibble;
|
|
int len;
|
|
{
|
|
|
|
int i;
|
|
unsigned dshift, sshift;
|
|
u_char nibble_a, nibble_b;
|
|
|
|
#ifdef ARGO_DEBUG
|
|
if (argo_debug[D_CADDR]) {
|
|
printf("nibble_match ( 0x%x, 0x%x, 0x%x, 0x%x 0x%x)\n",
|
|
src_octet, src_nibble, dst_octet, dst_nibble, len);
|
|
}
|
|
#endif
|
|
#define SHIFT 0x4
|
|
|
|
dshift = dst_nibble << 2;
|
|
sshift = src_nibble << 2;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
nibble_b = ((*dst_octet) >> dshift) & 0xf;
|
|
nibble_a = (0xf & (*src_octet >> sshift));
|
|
if (nibble_b != nibble_a)
|
|
return 0;
|
|
|
|
dshift ^= SHIFT;
|
|
sshift ^= SHIFT;
|
|
src_nibble = 1 - src_nibble;
|
|
dst_nibble = 1 - dst_nibble;
|
|
src_octet += src_nibble;
|
|
dst_octet += dst_nibble;
|
|
}
|
|
#ifdef ARGO_DEBUG
|
|
if (argo_debug[D_CADDR]) {
|
|
printf("nibble_match DONE\n");
|
|
}
|
|
#endif
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
**************************** NET PROTOCOL cons ***************************
|
|
*/
|
|
/*
|
|
* NAME: cons_init()
|
|
* CALLED FROM:
|
|
* autoconf
|
|
* FUNCTION:
|
|
* initialize the protocol
|
|
*/
|
|
void
|
|
cons_init()
|
|
{
|
|
CLNP_proto = pffindproto(AF_ISO, ISOPROTO_CLNP, SOCK_DGRAM);
|
|
X25_proto = pffindproto(AF_ISO, ISOPROTO_X25, SOCK_STREAM);
|
|
TP_proto = pffindproto(AF_ISO, ISOPROTO_TP0, SOCK_SEQPACKET);
|
|
#ifdef ARGO_DEBUG
|
|
if (argo_debug[D_CCONS]) {
|
|
printf("cons_init end : cnlp_proto 0x%x cons proto 0x%x tp proto 0x%x\n",
|
|
CLNP_proto, X25_proto, TP_proto);
|
|
}
|
|
#endif
|
|
#ifdef notdef
|
|
pk_protolisten(0x81, 0, clnp_incoming);
|
|
pk_protolisten(0x82, 0, esis_incoming);
|
|
pk_protolisten(0x84, 0, tp8878_A_incoming);
|
|
pk_protolisten(0, 0, tp_incoming);
|
|
#endif
|
|
}
|
|
|
|
int
|
|
tp_incoming(m, v)
|
|
struct mbuf *m;
|
|
void *v;
|
|
{
|
|
struct pklcd *lcp = v;
|
|
struct isopcb *isop;
|
|
|
|
if (iso_pcballoc(NULL, &tp_isopcb)) {
|
|
pk_close(lcp);
|
|
return 0;
|
|
}
|
|
isop = tp_isopcb.isop_next;
|
|
lcp->lcd_upper = cons_tpinput;
|
|
lcp->lcd_upnext = (caddr_t) isop;
|
|
lcp->lcd_send(lcp); /* Confirms call */
|
|
isop->isop_chan = (caddr_t) lcp;
|
|
isop->isop_laddr = &isop->isop_sladdr;
|
|
isop->isop_faddr = &isop->isop_sfaddr;
|
|
DTEtoNSAP(isop->isop_laddr, &lcp->lcd_laddr);
|
|
DTEtoNSAP(isop->isop_faddr, &lcp->lcd_faddr);
|
|
parse_facil(lcp, isop, &(mtod(m, struct x25_packet *)->packet_data),
|
|
m->m_pkthdr.len - PKHEADERLN);
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
cons_tpinput(m0, v)
|
|
struct mbuf *m0;
|
|
void *v;
|
|
{
|
|
struct pklcd *lcp = v;
|
|
struct isopcb *isop = (struct isopcb *) lcp->lcd_upnext;
|
|
int cmd, ptype = PK_CLEAR;
|
|
|
|
if (isop == 0)
|
|
return 0;
|
|
if (m0 == 0)
|
|
goto dead;
|
|
switch (m0->m_type) {
|
|
case MT_DATA:
|
|
case MT_OOBDATA:
|
|
tpcons_input(m0, isop->isop_faddr, isop->isop_laddr,
|
|
(caddr_t) lcp);
|
|
return 0;
|
|
|
|
case MT_CONTROL:
|
|
switch (ptype = pk_decode(mtod(m0, struct x25_packet *))) {
|
|
|
|
case PK_RR:
|
|
cmd = PRC_CONS_SEND_DONE;
|
|
break;
|
|
|
|
case PK_CALL_ACCEPTED:
|
|
if (lcp->lcd_sb.sb_mb)
|
|
lcp->lcd_send(lcp); /* XXX - fix this */
|
|
/* FALLTHROUGH */
|
|
default:
|
|
return 0;
|
|
|
|
dead:
|
|
case PK_CLEAR:
|
|
case PK_CLEAR_CONF:
|
|
lcp->lcd_upper = 0;
|
|
lcp->lcd_upnext = 0;
|
|
isop->isop_chan = 0;
|
|
case PK_RESET:
|
|
cmd = PRC_ROUTEDEAD;
|
|
}
|
|
tpcons_ctlinput(cmd, (struct sockaddr *) isop->isop_faddr,
|
|
isop);
|
|
if (cmd == PRC_ROUTEDEAD && isop->isop_refcnt == 0)
|
|
iso_pcbdetach(isop);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* NAME: cons_connect()
|
|
* CALLED FROM:
|
|
* tpcons_pcbconnect() when opening a new connection.
|
|
* FUNCTION anD ARGUMENTS:
|
|
* Figures out which device to use, finding a route if one doesn't
|
|
* already exist.
|
|
* RETURN VALUE:
|
|
* returns E*
|
|
*/
|
|
int
|
|
cons_connect(isop)
|
|
struct isopcb *isop;
|
|
{
|
|
struct pklcd *lcp = (struct pklcd *) isop->isop_chan;
|
|
int error;
|
|
|
|
#ifdef ARGO_DEBUG
|
|
if (argo_debug[D_CCONN]) {
|
|
printf("cons_connect(0x%x): ", isop);
|
|
dump_isoaddr(isop->isop_faddr);
|
|
printf("myaddr: ");
|
|
dump_isoaddr(isop->isop_laddr);
|
|
printf("\n");
|
|
}
|
|
#endif
|
|
NSAPtoDTE(isop->isop_faddr, &lcp->lcd_faddr);
|
|
lcp->lcd_upper = cons_tpinput;
|
|
lcp->lcd_upnext = (caddr_t) isop;
|
|
#ifdef ARGO_DEBUG
|
|
if (argo_debug[D_CCONN]) {
|
|
printf(
|
|
"calling make_partial_x25_packet( 0x%x, 0x%x, 0x%x)\n",
|
|
&lcp->lcd_faddr, &lcp->lcd_laddr,
|
|
isop->isop_socket->so_proto->pr_protocol);
|
|
}
|
|
#endif
|
|
if ((error = make_partial_x25_packet(isop, lcp)) == 0)
|
|
error = pk_connect(lcp, &lcp->lcd_faddr);
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
**************************** DEVICE cons ***************************
|
|
*/
|
|
|
|
|
|
/*
|
|
* NAME: cons_ctlinput() CALLED FROM: lower layer when ECN_CLEAR
|
|
* occurs : this routine is here for consistency - cons subnet service calls
|
|
* its higher layer through the protosw entry. FUNCTION & ARGUMENTS: cmd is a
|
|
* PRC_* command, list found in ../sys/protosw.h copcb is the obvious. This
|
|
* serves the higher-layer cons service. NOTE: this takes 3rd arg. because
|
|
* cons uses it to inform itself of things (timeouts, etc) but has a pcb
|
|
* instead of an address.
|
|
*/
|
|
void *
|
|
cons_ctlinput(cmd, sa, v)
|
|
int cmd;
|
|
struct sockaddr *sa;
|
|
void *v;
|
|
{
|
|
return NULL;
|
|
}
|
|
|
|
|
|
int
|
|
find_error_reason(xp)
|
|
struct x25_packet *xp;
|
|
{
|
|
int error, cause = 0;
|
|
|
|
if (xp) {
|
|
cause = 4[(char *) xp];
|
|
switch (cause) {
|
|
case 0x00:
|
|
case 0x80:
|
|
/* DTE originated; look at the diagnostic */
|
|
error = (CONL_ERROR_MASK | cause);
|
|
goto done;
|
|
|
|
case 0x01: /* number busy */
|
|
case 0x81:
|
|
case 0x09: /* Out of order */
|
|
case 0x89:
|
|
case 0x11: /* Remot Procedure Error */
|
|
case 0x91:
|
|
case 0x19: /* reverse charging accept not subscribed */
|
|
case 0x99:
|
|
case 0x21: /* Incampat destination */
|
|
case 0xa1:
|
|
case 0x29: /* fast select accept not subscribed */
|
|
case 0xa9:
|
|
case 0x39: /* ship absent */
|
|
case 0xb9:
|
|
case 0x03: /* invalid facil request */
|
|
case 0x83:
|
|
case 0x0b: /* access barred */
|
|
case 0x8b:
|
|
case 0x13: /* local procedure error */
|
|
case 0x93:
|
|
case 0x05: /* network congestion */
|
|
case 0x85:
|
|
case 0x8d: /* not obtainable */
|
|
case 0x0d:
|
|
case 0x95: /* RPOA out of order */
|
|
case 0x15:
|
|
/*
|
|
* take out bit 8 so we don't have to have so many
|
|
* perror entries
|
|
*/
|
|
error = (CONL_ERROR_MASK | 0x100 | (cause & ~0x80));
|
|
goto done;
|
|
|
|
case 0xc1: /* gateway-detected proc error */
|
|
case 0xc3: /* gateway congestion */
|
|
|
|
error = (CONL_ERROR_MASK | 0x100 | cause);
|
|
goto done;
|
|
}
|
|
}
|
|
/* otherwise, a *hopefully* valid perror exists in the e_reason field */
|
|
error = xp->packet_data;
|
|
if (error == 0) {
|
|
printf("Incoming PKT TYPE 0x%x with reason 0x%x\n",
|
|
pk_decode(xp), cause);
|
|
error = E_CO_HLI_DISCA;
|
|
}
|
|
done:
|
|
return error;
|
|
}
|
|
|
|
|
|
|
|
#endif /* _KERNEL */
|
|
|
|
/*
|
|
* NAME: make_partial_x25_packet()
|
|
*
|
|
* FUNCTION and ARGUMENTS:
|
|
* Makes part of an X.25 call packet, for use by x25.
|
|
* (src) and (dst) are the NSAP-addresses of source and destination.
|
|
* (buf) is a ptr to a buffer into which to write this partial header.
|
|
*
|
|
* 0 Facility length (in octets)
|
|
* 1 Facility field, which is a set of:
|
|
* m facil code
|
|
* m+1 facil param len (for >2-byte facilities) in octets
|
|
* m+2..p facil param field
|
|
* q user data (protocol identification octet)
|
|
*
|
|
*
|
|
* RETURNS:
|
|
* 0 if OK
|
|
* E* if failed.
|
|
*
|
|
* SIDE EFFECTS:
|
|
* Stores facilites mbuf in X.25 control block, where the connect
|
|
* routine knows where to look for it.
|
|
*/
|
|
|
|
#ifdef X25_1984
|
|
int cons_use_facils = 1;
|
|
#else /* X25_1984 */
|
|
int cons_use_facils = 0;
|
|
#endif /* X25_1984 */
|
|
|
|
int cons_use_udata = 1; /* KLUDGE FOR DEBUGGING */
|
|
|
|
Static int
|
|
make_partial_x25_packet(isop, lcp)
|
|
struct isopcb *isop;
|
|
struct pklcd *lcp;
|
|
{
|
|
u_int proto = 0;
|
|
int flag = 0;
|
|
caddr_t buf;
|
|
caddr_t ptr;
|
|
int len = 0;
|
|
int buflen = 0;
|
|
caddr_t facil_len;
|
|
struct mbuf *m = NULL;
|
|
|
|
|
|
#ifdef ARGO_DEBUG
|
|
if (argo_debug[D_CCONN]) {
|
|
printf("make_partial_x25_packet(0x%x, 0x%x, 0x%x, 0x%x, 0x%x)\n",
|
|
isop->isop_laddr, isop->isop_faddr, proto, m, flag);
|
|
}
|
|
#endif
|
|
if (cons_use_udata) {
|
|
if (isop->isop_x25crud_len > 0) {
|
|
/*
|
|
* The user specified something. Stick it in
|
|
*/
|
|
bcopy(isop->isop_x25crud, lcp->lcd_faddr.x25_udata,
|
|
isop->isop_x25crud_len);
|
|
lcp->lcd_faddr.x25_udlen = isop->isop_x25crud_len;
|
|
}
|
|
}
|
|
if (cons_use_facils == 0) {
|
|
lcp->lcd_facilities = 0;
|
|
return 0;
|
|
}
|
|
MGETHDR(m, M_WAIT, MT_DATA);
|
|
buf = mtod(m, caddr_t);
|
|
ptr = buf;
|
|
|
|
/* ptr now points to facil length (len of whole facil field in OCTETS */
|
|
facil_len = ptr++;
|
|
m->m_len = 0;
|
|
pk_build_facilities(m, &lcp->lcd_faddr, 0);
|
|
|
|
#ifdef ARGO_DEBUG
|
|
if (argo_debug[D_CADDR]) {
|
|
printf("make_partial calling: ptr 0x%x, len 0x%x\n", ptr,
|
|
isop->isop_laddr->siso_addr.isoa_len);
|
|
}
|
|
#endif
|
|
if (cons_use_facils) {
|
|
*ptr++ = 0; /* Marker to separate X.25 facitilies from
|
|
* CCITT ones */
|
|
*ptr++ = 0x0f;
|
|
*ptr = 0xcb; /* calling facility code */
|
|
ptr++;
|
|
ptr++; /* leave room for facil param len (in OCTETS
|
|
* + 1) */
|
|
ptr++; /* leave room for the facil param len (in
|
|
* nibbles), high two bits of which indicate
|
|
* full/partial NSAP */
|
|
len = isop->isop_laddr->siso_addr.isoa_len;
|
|
bcopy(isop->isop_laddr->siso_data, ptr, len);
|
|
*(ptr - 2) = len + 1; /* facil param len in octets */
|
|
*(ptr - 1) = len << 1; /* facil param len in nibbles */
|
|
ptr += len;
|
|
|
|
#ifdef ARGO_DEBUG
|
|
if (argo_debug[D_CADDR]) {
|
|
printf("make_partial called: ptr 0x%x, len 0x%x\n", ptr,
|
|
isop->isop_faddr->siso_addr.isoa_len);
|
|
}
|
|
#endif
|
|
*ptr = 0xc9; /* called facility code */
|
|
ptr++;
|
|
ptr++; /* leave room for facil param len (in OCTETS
|
|
* + 1) */
|
|
ptr++; /* leave room for the facil param len (in
|
|
* nibbles), high two bits of which indicate
|
|
* full/partial NSAP */
|
|
len = isop->isop_faddr->siso_nlen;
|
|
bcopy(isop->isop_faddr->siso_data, ptr, len);
|
|
*(ptr - 2) = len + 1; /* facil param len = addr len + 1 for
|
|
* each of these two length fields,
|
|
* in octets */
|
|
*(ptr - 1) = len << 1; /* facil param len in nibbles */
|
|
ptr += len;
|
|
|
|
}
|
|
*facil_len = ptr - facil_len - 1;
|
|
if (*facil_len > MAX_FACILITIES)
|
|
return E_CO_PNA_LONG;
|
|
|
|
buflen = (int) (ptr - buf);
|
|
|
|
#ifdef ARGO_DEBUG
|
|
if (argo_debug[D_CDUMP_REQ]) {
|
|
int i;
|
|
|
|
printf("ECN_CONNECT DATA buf 0x%x len %d (0x%x)\n",
|
|
buf, buflen, buflen);
|
|
for (i = 0; i < buflen;) {
|
|
printf("+%d: %x %x %x %x %x %x %x %x\n",
|
|
i,
|
|
*(buf + i), *(buf + i + 1), *(buf + i + 2), *(buf + i + 3),
|
|
*(buf + i + 4), *(buf + i + 5), *(buf + i + 6), *(buf + i + 7));
|
|
i += 8;
|
|
}
|
|
}
|
|
#endif
|
|
#ifdef ARGO_DEBUG
|
|
if (argo_debug[D_CADDR]) {
|
|
printf("make_partial returns buf 0x%x size 0x%x bytes\n",
|
|
mtod(m, caddr_t), buflen);
|
|
}
|
|
#endif
|
|
|
|
if (buflen > MHLEN)
|
|
return E_CO_PNA_LONG;
|
|
|
|
m->m_pkthdr.len = m->m_len = buflen;
|
|
lcp->lcd_facilities = m;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* NAME: NSAPtoDTE()
|
|
* CALLED FROM:
|
|
* make_partial_x25_packet()
|
|
* FUNCTION and ARGUMENTS:
|
|
* get a DTE address from an NSAP-address (struct sockaddr_iso)
|
|
* (dst_octet) is the octet into which to begin stashing the DTE addr
|
|
* (dst_nibble) takes 0 or 1. 1 means begin filling in the DTE addr
|
|
* in the high-order nibble of dst_octet. 0 means low-order nibble.
|
|
* (addr) is the NSAP-address
|
|
* (flag) is true if the transport suffix is to become the
|
|
* last two digits of the DTE address
|
|
* A DTE address is a series of ASCII digits
|
|
*
|
|
* A DTE address may have leading zeros. The are significant.
|
|
* 1 digit per nibble, may be an odd number of nibbles.
|
|
*
|
|
* An NSAP-address has the DTE address in the IDI. Leading zeros are
|
|
* significant. Trailing hex f indicates the end of the DTE address.
|
|
* The IDI is a series of BCD digits, one per nibble.
|
|
*
|
|
* RETURNS
|
|
* # significant digits in the DTE address, -1 if error.
|
|
*/
|
|
|
|
Static int
|
|
NSAPtoDTE(siso, sx25)
|
|
struct sockaddr_iso *siso;
|
|
struct sockaddr_x25 *sx25;
|
|
{
|
|
int dtelen = -1;
|
|
|
|
#ifdef ARGO_DEBUG
|
|
if (argo_debug[D_CADDR]) {
|
|
printf("NSAPtoDTE: nsap: %s\n",
|
|
clnp_iso_addrp(&siso->siso_addr));
|
|
}
|
|
#endif
|
|
|
|
if (siso->siso_data[0] == AFI_37) {
|
|
char *out = sx25->x25_addr;
|
|
char *in = siso->siso_data + 1;
|
|
int nibble;
|
|
char *lim = siso->siso_data + siso->siso_nlen;
|
|
char *olim = out + 15;
|
|
int lowNibble = 0;
|
|
|
|
while (in < lim) {
|
|
nibble = ((lowNibble ? *in++ : (*in >> 4)) & 0xf) | 0x30;
|
|
lowNibble ^= 1;
|
|
if (nibble != 0x3f && out < olim)
|
|
*out++ = nibble;
|
|
}
|
|
dtelen = out - sx25->x25_addr;
|
|
*out++ = 0;
|
|
} else {
|
|
/*
|
|
* error = iso_8208snparesolve(addr, x121string,
|
|
* &x121strlen);
|
|
*/
|
|
struct rtentry *rt;
|
|
extern struct sockaddr_iso blank_siso;
|
|
struct sockaddr_iso nsiso;
|
|
|
|
nsiso = blank_siso;
|
|
bcopy(nsiso.siso_data, siso->siso_data,
|
|
nsiso.siso_nlen = siso->siso_nlen);
|
|
if ((rt = rtalloc1((struct sockaddr *) &nsiso, 1)) != NULL) {
|
|
struct sockaddr_x25 *sxx =
|
|
(struct sockaddr_x25 *) rt->rt_gateway;
|
|
char *in = sxx->x25_addr;
|
|
|
|
rt->rt_use--;
|
|
if (sxx && sxx->x25_family == AF_CCITT) {
|
|
bcopy(sx25->x25_addr, sxx->x25_addr, sizeof(sx25->x25_addr));
|
|
while (*in++) {
|
|
}
|
|
dtelen = in - sxx->x25_addr;
|
|
}
|
|
}
|
|
}
|
|
return dtelen;
|
|
}
|
|
|
|
/*
|
|
* NAME: FACILtoNSAP()
|
|
* CALLED FROM:
|
|
* parse_facil()
|
|
* FUNCTION and ARGUMENTS:
|
|
* Creates and NSAP in the sockaddr_iso (addr) from the
|
|
* x.25 facility found at buf - 1.
|
|
* RETURNS:
|
|
* 0 if ok, -1 if error.
|
|
*/
|
|
|
|
Static int
|
|
FACILtoNSAP(addr, buf)
|
|
u_char *buf;
|
|
struct sockaddr_iso *addr;
|
|
{
|
|
int len_in_nibbles = *++buf & 0x3f;
|
|
u_char buf_len = (len_in_nibbles + 1) >> 1;; /* in bytes */
|
|
|
|
#ifdef ARGO_DEBUG
|
|
if (argo_debug[D_CADDR]) {
|
|
printf("FACILtoNSAP( 0x%x, 0x%x, 0x%x )\n",
|
|
buf, buf_len, addr);
|
|
}
|
|
#endif
|
|
|
|
len_in_nibbles = *buf & 0x3f;
|
|
/*
|
|
* despite the fact that X.25 makes us put a length in nibbles here,
|
|
* the NSAP-addrs are always in full octets
|
|
*/
|
|
switch (*buf++ & 0xc0) {
|
|
case 0:
|
|
/* Entire OSI NSAP address */
|
|
bcopy((caddr_t) buf, addr->siso_data, addr->siso_nlen = buf_len);
|
|
break;
|
|
|
|
case 40:
|
|
/* Partial OSI NSAP address, assume trailing */
|
|
if (buf_len + addr->siso_nlen > sizeof(addr->siso_addr))
|
|
return -1;
|
|
bcopy((caddr_t) buf, TSEL(addr), buf_len);
|
|
addr->siso_nlen += buf_len;
|
|
break;
|
|
|
|
default:
|
|
/*
|
|
* Rather than blow away the connection, just ignore and use
|
|
* NSAP from DTE
|
|
*/ ;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
Static void
|
|
init_siso(siso)
|
|
struct sockaddr_iso *siso;
|
|
{
|
|
siso->siso_len = sizeof(*siso);
|
|
siso->siso_family = AF_ISO;
|
|
siso->siso_data[0] = AFI_37;
|
|
siso->siso_nlen = 8;
|
|
}
|
|
|
|
/*
|
|
* NAME: DTEtoNSAP()
|
|
* CALLED FROM:
|
|
* parse_facil()
|
|
* FUNCTION and ARGUMENTS:
|
|
* Creates a type 37 NSAP in the sockaddr_iso (addr)
|
|
* from a DTE address found in a sockaddr_x25.
|
|
*
|
|
* RETURNS:
|
|
* 0 if ok; E* otherwise.
|
|
*/
|
|
|
|
Static int
|
|
DTEtoNSAP(addr, sx)
|
|
struct sockaddr_iso *addr;
|
|
struct sockaddr_x25 *sx;
|
|
{
|
|
char *in, *out;
|
|
int first;
|
|
int pad_tail = 0;
|
|
int src_len;
|
|
|
|
|
|
init_siso(addr);
|
|
in = sx->x25_addr;
|
|
src_len = strlen(in);
|
|
addr->siso_nlen = (src_len + 3) / 2;
|
|
out = addr->siso_data;
|
|
*out++ = 0x37;
|
|
if (src_len & 1) {
|
|
pad_tail = 0xf;
|
|
src_len++;
|
|
}
|
|
for (first = 0; src_len > 0; src_len--) {
|
|
first |= 0xf & *in++;
|
|
if (src_len & 1) {
|
|
*out++ = first;
|
|
first = 0;
|
|
} else
|
|
first <<= 4;
|
|
}
|
|
if (pad_tail)
|
|
out[-1] |= 0xf;
|
|
return 0; /* ok */
|
|
}
|
|
|
|
/*
|
|
* FUNCTION and ARGUMENTS:
|
|
* parses (buf_len) bytes beginning at (buf) and finds
|
|
* a called nsap, a calling nsap, and protocol identifier.
|
|
* RETURNS:
|
|
* 0 if ok, E* otherwise.
|
|
*/
|
|
|
|
Static int
|
|
parse_facil(lcp, isop, buf, buf_len)
|
|
caddr_t buf;
|
|
u_char buf_len;/* in bytes */
|
|
struct isopcb *isop;
|
|
struct pklcd *lcp;
|
|
{
|
|
int i;
|
|
u_char *ptr = (u_char *) buf;
|
|
u_char *facil_lim;
|
|
int facil_param_len = 0, facil_len;
|
|
|
|
#ifdef ARGO_DEBUG
|
|
if (argo_debug[D_CADDR]) {
|
|
printf("parse_facil(0x%x, 0x%x, 0x%x, 0x%x)\n",
|
|
lcp, isop, buf, buf_len);
|
|
dump_buf(buf, buf_len);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* find the beginnings of the facility fields in buf by skipping over
|
|
* the called & calling DTE addresses i <- # nibbles in called + #
|
|
* nibbles in calling i += 1 so that an odd nibble gets rounded up to
|
|
* even before dividing by 2, then divide by two to get # octets
|
|
*/
|
|
i = (int) (*ptr >> 4) + (int) (*ptr & 0xf);
|
|
i++;
|
|
ptr += i >> 1;
|
|
ptr++; /* plus one for the DTE lengths byte */
|
|
|
|
/* ptr now is at facil_length field */
|
|
facil_len = *ptr++;
|
|
facil_lim = ptr + facil_len;
|
|
#ifdef ARGO_DEBUG
|
|
if (argo_debug[D_CADDR]) {
|
|
printf("parse_facils: facil length is 0x%x\n", (int) facil_len);
|
|
}
|
|
#endif
|
|
|
|
while (ptr < facil_lim) {
|
|
/* get NSAP addresses from facilities */
|
|
switch (*ptr++) {
|
|
case 0xcb:
|
|
/* calling NSAP */
|
|
facil_param_len = FACILtoNSAP(isop->isop_faddr, ptr);
|
|
break;
|
|
case 0xc9:
|
|
/* called NSAP */
|
|
facil_param_len = FACILtoNSAP(isop->isop_laddr, ptr);
|
|
break;
|
|
|
|
/* from here to default are legit cases that I ignore */
|
|
/* variable length */
|
|
case 0xca: /* end-to-end transit delay negot */
|
|
case 0xc6: /* network user id */
|
|
case 0xc5: /* charging info : indicating monetary unit */
|
|
case 0xc2: /* charging info : indicating segment count */
|
|
case 0xc1: /* charging info : indicating call duration */
|
|
case 0xc4: /* RPOA extended format */
|
|
case 0xc3: /* call redirection notification */
|
|
facil_param_len = 0;
|
|
break;
|
|
|
|
/* 1 octet */
|
|
case 0x0a: /* min. throughput class negot */
|
|
case 0x02: /* throughput class */
|
|
case 0x03:
|
|
case 0x47: /* CUG shit */
|
|
case 0x0b: /* expedited data negot */
|
|
case 0x01: /* Fast select or reverse charging (example
|
|
* of intelligent protocol design) */
|
|
case 0x04: /* charging info : requesting service */
|
|
case 0x08: /* called line addr modified notification */
|
|
case 0x00: /* marker to indicate beginning of CCITT
|
|
* facils */
|
|
facil_param_len = 1;
|
|
break;
|
|
|
|
/* any 2 octets */
|
|
case 0x42: /* pkt size */
|
|
case 0x43: /* win size */
|
|
case 0x44: /* RPOA basic format */
|
|
case 0x41: /* bilateral CUG shit */
|
|
case 0x49: /* transit delay selection and indication */
|
|
facil_param_len = 2;
|
|
break;
|
|
|
|
default:
|
|
printf(
|
|
"BOGUS FACILITY CODE facil_lim 0x%x facil_len %d, ptr 0x%x *ptr 0x%x\n",
|
|
facil_lim, facil_len, ptr - 1, ptr[-1]);
|
|
/*
|
|
* facil that we don't handle return E_CO_HLI_REJI;
|
|
*/
|
|
switch (ptr[-1] & 0xc0) {
|
|
case 0x00:
|
|
facil_param_len = 1;
|
|
break;
|
|
case 0x40:
|
|
facil_param_len = 2;
|
|
break;
|
|
case 0x80:
|
|
facil_param_len = 3;
|
|
break;
|
|
case 0xc0:
|
|
facil_param_len = 0;
|
|
break;
|
|
}
|
|
}
|
|
if (facil_param_len == -1)
|
|
return E_CO_REG_ICDA;
|
|
if (facil_param_len == 0) /* variable length */
|
|
facil_param_len = (int) *ptr++; /* 1 + the real facil
|
|
* param */
|
|
ptr += facil_param_len;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#endif /* TPCONS */
|