499 lines
17 KiB
C
499 lines
17 KiB
C
/* $NetBSD: smc83c170reg.h,v 1.7 2001/09/16 16:34:37 wiz Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1998 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
|
|
* NASA Ames Research Center.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the NetBSD
|
|
* Foundation, Inc. and its contributors.
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef _DEV_IC_SMC83C170REG_H_
|
|
#define _DEV_IC_SMC83C170REG_H_
|
|
|
|
/*
|
|
* Register description for the Standard Microsystems Corp. 83C170
|
|
* Ethernet PCI Integrated Controller (EPIC/100).
|
|
*/
|
|
|
|
/*
|
|
* EPIC transmit descriptor. Must be 4-byte aligned.
|
|
*/
|
|
struct epic_txdesc {
|
|
#if BYTE_ORDER == BIG_ENDIAN
|
|
u_int16_t et_txlength; /* transmit length */
|
|
u_int16_t et_txstatus; /* transmit status; see below */
|
|
#else
|
|
u_int16_t et_txstatus; /* transmit status; see below */
|
|
u_int16_t et_txlength; /* transmit length */
|
|
#endif
|
|
u_int32_t et_bufaddr; /* buffer address */
|
|
#if BYTE_ORDER == BIG_ENDIAN
|
|
u_int16_t et_control; /* control word; see below */
|
|
u_int16_t et_buflength; /* buffer length */
|
|
#else
|
|
u_int16_t et_buflength; /* buffer length */
|
|
u_int16_t et_control; /* control word; see below */
|
|
#endif
|
|
u_int32_t et_nextdesc; /* next descriptor pointer */
|
|
};
|
|
|
|
/* et_txstatus */
|
|
#define ET_TXSTAT_OWNER 0x8000 /* NIC owns descriptor */
|
|
#define ET_TXSTAT_COLLMASK 0x1f00 /* collisions */
|
|
#define ET_TXSTAT_DEFERRING 0x0080 /* deferring due to jabber */
|
|
#define ET_TXSTAT_OOWCOLL 0x0040 /* out of window collision */
|
|
#define ET_TXSTAT_CDHB 0x0020 /* collision detect heartbeat */
|
|
#define ET_TXSTAT_UNDERRUN 0x0010 /* DMA underrun */
|
|
#define ET_TXSTAT_CARSENSELOST 0x0008 /* carrier lost */
|
|
#define ET_TXSTAT_TXWITHCOLL 0x0004 /* encountered collisions during tx */
|
|
#define ET_TXSTAT_NONDEFERRED 0x0002 /* transmitted without deferring */
|
|
#define ET_TXSTAT_PACKETTX 0x0001 /* packet transmitted successfully */
|
|
|
|
#define TXSTAT_COLLISIONS(x) (((x) & ET_TXSTAT_COLLMASK) >> 8)
|
|
|
|
/* et_control */
|
|
#define ET_TXCTL_LASTDESC 0x0010 /* last descriptor in frame */
|
|
#define ET_TXCTL_NOCRC 0x0008 /* disable CRC generation */
|
|
#define ET_TXCTL_IAF 0x0004 /* interrupt after frame */
|
|
#define ET_TXCTL_LFFORM 0x0002 /* alternate fraglist format */
|
|
#define ET_TXCTL_FRAGLIST 0x0001 /* descriptor points to fraglist */
|
|
|
|
/*
|
|
* EPIC receive descriptor. Must be 4-byte aligned.
|
|
*/
|
|
struct epic_rxdesc {
|
|
#if BYTE_ORDER == BIG_ENDIAN
|
|
u_int16_t er_rxlength; /* receive frame length */
|
|
u_int16_t er_rxstatus; /* receive status; see below */
|
|
#else
|
|
u_int16_t er_rxstatus; /* receive status; see below */
|
|
u_int16_t er_rxlength; /* receive frame length */
|
|
#endif
|
|
u_int32_t er_bufaddr; /* buffer address */
|
|
#if BYTE_ORDER == BIG_ENDIAN
|
|
u_int16_t er_control; /* control word; see below */
|
|
u_int16_t er_buflength; /* buffer length */
|
|
#else
|
|
u_int16_t er_buflength; /* buffer length */
|
|
u_int16_t er_control; /* control word; see below */
|
|
#endif
|
|
u_int32_t er_nextdesc; /* next descriptor pointer */
|
|
};
|
|
|
|
/* er_rxstatus */
|
|
#define ER_RXSTAT_OWNER 0x8000 /* NIC owns descriptor */
|
|
#define ER_RXSTAT_HDRCOPIED 0x4000 /* rx status posted after hdr copy */
|
|
#define ER_RXSTAT_FRAGLISTERR 0x2000 /* ran out of frags to copy frame */
|
|
#define ER_RXSTAT_NETSTATVALID 0x1000 /* length and status are valid */
|
|
#define ER_RXSTAT_RCVRDIS 0x0040 /* receiver disabled */
|
|
#define ER_RXSTAT_BCAST 0x0020 /* broadcast address recognized */
|
|
#define ER_RXSTAT_MCAST 0x0010 /* multicast address recognized */
|
|
#define ER_RXSTAT_MISSEDPKT 0x0008 /* missed packet */
|
|
#define ER_RXSTAT_CRCERROR 0x0004 /* EPIC or MII asserted CRC error */
|
|
#define ER_RXSTAT_ALIGNERROR 0x0002 /* frame not byte-aligned */
|
|
#define ER_RXSTAT_PKTINTACT 0x0001 /* packet received without error */
|
|
|
|
/* er_control */
|
|
#define ER_RXCTL_HEADER 0x0004 /* descriptor is for hdr copy */
|
|
#define ER_RXCTL_LFFORM 0x0002 /* alternate fraglist format */
|
|
#define ER_RXCTL_FRAGLIST 0x0001 /* descriptor points to fraglist */
|
|
|
|
/*
|
|
* This is not really part of the register description, but we need
|
|
* to define the number of transmit fragments *somewhere*.
|
|
*/
|
|
#define EPIC_NFRAGS 16 /* maximum number of frags in list */
|
|
|
|
/*
|
|
* EPIC fraglist descriptor.
|
|
*/
|
|
struct epic_fraglist {
|
|
u_int32_t ef_nfrags; /* number of frags in list */
|
|
struct {
|
|
u_int32_t ef_addr; /* address of frag */
|
|
u_int32_t ef_length; /* length of frag */
|
|
} ef_frags[EPIC_NFRAGS];
|
|
};
|
|
|
|
/*
|
|
* EPIC control registers.
|
|
*/
|
|
|
|
#define EPIC_COMMAND 0x00 /* COMMAND */
|
|
#define COMMAND_TXUGO 0x00000080 /* start tx after underrun */
|
|
#define COMMAND_STOP_RDMA 0x00000040 /* stop rx dma */
|
|
#define COMMAND_STOP_TDMA 0x00000020 /* stop tx dma */
|
|
#define COMMAND_NEXTFRAME 0x00000010 /* move onto next rx frame */
|
|
#define COMMAND_RXQUEUED 0x00000008 /* queue a rx descriptor */
|
|
#define COMMAND_TXQUEUED 0x00000004 /* queue a tx descriptor */
|
|
#define COMMAND_START_RX 0x00000002 /* start receiver */
|
|
#define COMMAND_STOP_RX 0x00000001 /* stop receiver */
|
|
|
|
#define EPIC_INTSTAT 0x04 /* INTERRUPT STATUS */
|
|
#define INTSTAT_PTA 0x08000000 /* PCI target abort */
|
|
#define INTSTAT_PMA 0x04000000 /* PCI master abort */
|
|
#define INTSTAT_APE 0x02000000 /* PCI address parity error */
|
|
#define INTSTAT_DPE 0x01000000 /* PCI data parity error */
|
|
#define INTSTAT_RSV 0x00800000 /* rx status valid */
|
|
#define INTSTAT_RCTS 0x00400000 /* rx copy threshold status */
|
|
#define INTSTAT_RBE 0x00200000 /* rx buffers empty */
|
|
#define INTSTAT_TCIP 0x00100000 /* tx copy in progress */
|
|
#define INTSTAT_RCIP 0x00080000 /* rx copy in progress */
|
|
#define INTSTAT_TXIDLE 0x00040000 /* transmit idle */
|
|
#define INTSTAT_RXIDLE 0x00020000 /* receive idle */
|
|
#define INTSTAT_INT_ACTV 0x00010000 /* interrupt active */
|
|
#define INTSTAT_GP2_INT 0x00008000 /* gpio2 low (PHY event) */
|
|
#define INTSTAT_FATAL_INT 0x00001000 /* fatal error occurred */
|
|
#define INTSTAT_RCT 0x00000800 /* rx copy threshold crossed */
|
|
#define INTSTAT_PREI 0x00000400 /* preemptive interrupt */
|
|
#define INTSTAT_CNT 0x00000200 /* counter overflow */
|
|
#define INTSTAT_TXU 0x00000100 /* transmit underrun */
|
|
#define INTSTAT_TQE 0x00000080 /* transmit queue empty */
|
|
#define INTSTAT_TCC 0x00000040 /* transmit chain complete */
|
|
#define INTSTAT_TXC 0x00000020 /* transmit complete */
|
|
#define INTSTAT_RXE 0x00000010 /* receive error */
|
|
#define INTSTAT_OVW 0x00000008 /* rx buffer overflow */
|
|
#define INTSTAT_RQE 0x00000004 /* receive queue empty */
|
|
#define INTSTAT_HCC 0x00000002 /* header copy complete */
|
|
#define INTSTAT_RCC 0x00000001 /* receive copy complete */
|
|
|
|
#define EPIC_INTMASK 0x08 /* INTERRUPT MASK */
|
|
/* Bits 0-15 enable the corresponding interrupt in INTSTAT. */
|
|
|
|
#define EPIC_GENCTL 0x0c /* GENERAL CONTROL */
|
|
#define GENCTL_RESET_PHY 0x00004000 /* reset PHY */
|
|
#define GENCTL_SOFT1 0x00002000 /* software use */
|
|
#define GENCTL_SOFT0 0x00001000 /* software use */
|
|
#define GENCTL_MEM_READ_CTL1 0x00000800 /* PCI memory control */
|
|
#define GENCTL_MEM_READ_CTL0 0x00000400 /* (see below) */
|
|
#define GENCTL_RX_FIFO_THRESH1 0x00000200 /* rx fifo thresh */
|
|
#define GENCTL_RX_FIFO_THRESH0 0x00000100 /* (see below) */
|
|
#define GENCTL_BIG_ENDIAN 0x00000020 /* big endian mode */
|
|
#define GENCTL_ONECOPY 0x00000010 /* auto-NEXTFRAME */
|
|
#define GENCTL_POWERDOWN 0x00000008 /* powersave sleep mode */
|
|
#define GENCTL_SOFTINT 0x00000004 /* software-generated intr */
|
|
#define GENCTL_INTENA 0x00000002 /* interrupt enable */
|
|
#define GENCTL_SOFTRESET 0x00000001 /* initialize EPIC */
|
|
|
|
/*
|
|
* Explanation of MEMORY READ CONTROL:
|
|
*
|
|
* These bits control which PCI command the transmit DMA will use when
|
|
* bursting data over the PCI bus. When CTL1 is set, the transmit DMA
|
|
* will use the PCI "memory read line" command. When CTL0 is set, the
|
|
* transmit DMA will use the PCI "memory read multiple" command. When
|
|
* neither bit is set, the transmit DMA will use the "memory read" command.
|
|
* Use of "memory read line" or "memory read multiple" may enhance
|
|
* performance on some systems.
|
|
*/
|
|
|
|
/*
|
|
* Explanation of RECEIVE FIFO THRESHOLD:
|
|
*
|
|
* Controls the level at which the PCI burst state machine begins to
|
|
* empty the receive FIFO. Default is "1/2 full" (0,1).
|
|
*
|
|
* 0,0 1/4 full 32 bytes
|
|
* 0,1 1/2 full 64 bytes
|
|
* 1,0 3/4 full 96 bytes
|
|
* 1,1 full 128 bytes
|
|
*/
|
|
|
|
#define EPIC_NVCTL 0x10 /* NON-VOLATILE CONTROL */
|
|
#define NVCTL_IPG_DLY_MASK 0x00000780 /* interpacket delay gap */
|
|
#define NVCTL_CB_MODE 0x00000040 /* CardBus mode */
|
|
#define NVCTL_GPIO2 0x00000020 /* general purpose i/o */
|
|
#define NVCTL_GPIO1 0x00000010 /* ... */
|
|
#define NVCTL_GPOE2 0x00000008 /* general purpose output ena */
|
|
#define NVCTL_GPOE1 0x00000004 /* ... */
|
|
#define NVCTL_CLKRUNSUPP 0x00000002 /* clock run supported */
|
|
#define NVCTL_ENAMEMMAP 0x00000001 /* enable memory map */
|
|
|
|
#define NVCTL_IPG_DLY(x) (((x) & NVCTL_IPG_DLY_MASK) >> 7)
|
|
|
|
#define EPIC_EECTL 0x14 /* EEPROM CONTROL */
|
|
#define EECTL_EEPROMSIZE 0x00000040 /* eeprom size; see below */
|
|
#define EECTL_EERDY 0x00000020 /* eeprom ready */
|
|
#define EECTL_EEDO 0x00000010 /* eeprom data out (from) */
|
|
#define EECTL_EEDI 0x00000008 /* eeprom data in (to) */
|
|
#define EECTL_EESK 0x00000004 /* eeprom clock */
|
|
#define EECTL_EECS 0x00000002 /* eeprom chip select */
|
|
#define EECTL_ENABLE 0x00000001 /* eeprom enable */
|
|
|
|
/*
|
|
* Explanation of EEPROM SIZE:
|
|
*
|
|
* Indicates the size of the serial EEPROM:
|
|
*
|
|
* 1 16x16 or 64x16
|
|
* 0 128x16 or 256x16
|
|
*/
|
|
|
|
/*
|
|
* Serial EEPROM opcodes, including start bit:
|
|
*/
|
|
#define EPIC_EEPROM_OPC_WRITE 0x05
|
|
#define EPIC_EEPROM_OPC_READ 0x06
|
|
|
|
#define EPIC_PBLCNT 0x18 /* PBLCNT */
|
|
#define PBLCNT_MASK 0x0000003f /* programmable burst length */
|
|
|
|
#define EPIC_TEST 0x1c /* TEST */
|
|
#define TEST_CLOCKTEST 0x00000008
|
|
|
|
#define EPIC_CRCCNT 0x20 /* CRC ERROR COUNTER */
|
|
#define CRCCNT_MASK 0x0000000f /* crc errs since last read */
|
|
|
|
#define EPIC_ALICNT 0x24 /* FRAME ALIGNMENT ERROR COUNTER */
|
|
#define ALICNT_MASK 0x0000000f /* align errs since last read */
|
|
|
|
#define EPIC_MPCNT 0x28 /* MISSED PACKET COUNTER */
|
|
#define MPCNT_MASK 0x0000000f /* miss. pkts since last read */
|
|
|
|
#define EPIC_RXFIFO 0x2c
|
|
|
|
#define EPIC_MMCTL 0x30 /* MII MANAGEMENT INTERFACE CONTROL */
|
|
#define MMCTL_PHY_ADDR_MASK 0x00003e00 /* phy address field */
|
|
#define MMCTL_PHY_REG_ADDR_MASK 0x000001f0 /* phy register address field */
|
|
#define MMCTL_RESPONDER 0x00000008 /* phy responder */
|
|
#define MMCTL_WRITE 0x00000002 /* write to phy */
|
|
#define MMCTL_READ 0x00000001 /* read from phy */
|
|
|
|
#define MMCTL_ARG(phy, reg, cmd) (((phy) << 9) | ((reg) << 4) | (cmd))
|
|
|
|
#define EPIC_MMDATA 0x34 /* MII MANAGEMENT INTERFACE DATA */
|
|
#define MMDATA_MASK 0x0000ffff /* MII frame data */
|
|
|
|
#define EPIC_MIICFG 0x38 /* MII CONFIGURATION */
|
|
#define MIICFG_ALTDIR 0x00000080 /* alternate direction */
|
|
#define MIICFG_ALTDATA 0x00000040 /* alternate data */
|
|
#define MIICFG_ALTCLOCK 0x00000020 /* alternate clock source */
|
|
#define MIICFG_ENASER 0x00000010 /* enable serial manag intf */
|
|
#define MIICFG_PHYPRESENT 0x00000008 /* phy present on MII */
|
|
#define MIICFG_LINKSTATUS 0x00000004 /* 694 link status */
|
|
#define MIICFG_ENABLE 0x00000002 /* enable 694 */
|
|
#define MIICFG_SERMODEENA 0x00000001 /* serial mode enable */
|
|
|
|
#define EPIC_IPG 0x3c /* INTERPACKET GAP */
|
|
#define IPG_INTERFRAME_MASK 0x00007f00 /* interframe gap time */
|
|
#define IPG_INTERPKT_MASK 0x000000ff /* interpacket gap time */
|
|
|
|
#define EPIC_LAN0 0x40 /* LAN ADDRESS */
|
|
|
|
#define EPIC_LAN1 0x44
|
|
|
|
#define EPIC_LAN2 0x48
|
|
|
|
#define LANn_MASK 0x0000ffff
|
|
|
|
/*
|
|
* Explanation of LAN ADDRESS registers:
|
|
*
|
|
* LAN address is described as:
|
|
*
|
|
* 0000 [n1][n0][n3][n2] | 0000 [n5][n4][n7][n6] | 0000 [n9][n8][n11][n10]
|
|
*
|
|
* n == one nibble, mapped as follows:
|
|
*
|
|
* LAN0 [15-12] n3
|
|
* LAN0 [11-8] n2
|
|
* LAN0 [7-4] n1
|
|
* LAN0 [3-0] n0
|
|
* LAN1 [15-12] n7
|
|
* LAN1 [11-8] n6
|
|
* LAN1 [7-4] n5
|
|
* LAN1 [3-0] n4
|
|
* LAN2 [15-12] n11
|
|
* LAN2 [11-8] n10
|
|
* LAN2 [7-4] n9
|
|
* LAN2 [3-0] n8
|
|
*
|
|
* The LAN address is automatically recalled from the EEPROM after a
|
|
* hard reseet.
|
|
*/
|
|
|
|
#define EPIC_IDCHK 0x4c /* BOARD ID/CHECKSUM */
|
|
#define IDCHK_ID_MASK 0x0000ff00 /* board ID */
|
|
#define IDCHK_CKSUM_MASK 0x000000ff /* checksum (should be 0xff) */
|
|
|
|
#define EPIC_MC0 0x50 /* MULTICAST ADDDRESS HASH TABLE */
|
|
|
|
#define EPIC_MC1 0x54
|
|
|
|
#define EPIC_MC2 0x58
|
|
|
|
#define EPIC_MC3 0x5c
|
|
|
|
/*
|
|
* Explanation of MULTICAST ADDRESS HASH TABLE registers:
|
|
*
|
|
* Bits in the hash table are encoded as follows:
|
|
*
|
|
* MC0 [15-0]
|
|
* MC1 [31-16]
|
|
* MC2 [47-32]
|
|
* MC3 [53-48]
|
|
*/
|
|
|
|
#define EPIC_RXCON 0x60 /* RECEIVE CONTROL */
|
|
#define RXCON_EXTBUFSIZESEL1 0x00000200 /* ext buf size; see below */
|
|
#define RXCON_EXTBUFSIZESEL0 0x00000100 /* ... */
|
|
#define RXCON_EARLYRXENABLE 0x00000080 /* early receive enable */
|
|
#define RXCON_MONITORMODE 0x00000040 /* monitor mode */
|
|
#define RXCON_PROMISCMODE 0x00000020 /* promiscuous mode */
|
|
#define RXCON_RXINVADDR 0x00000010 /* rx inv individual addr */
|
|
#define RXCON_RXMULTICAST 0x00000008 /* receive multicast */
|
|
#define RXCON_RXBROADCAST 0x00000004 /* receive broadcast */
|
|
#define RXCON_RXRUNT 0x00000002 /* receive runt frames */
|
|
#define RXCON_SAVEERRPKTS 0x00000001 /* save errored packets */
|
|
|
|
/*
|
|
* Explanation of EXTERNAL BUFFER SIZE SELECT:
|
|
*
|
|
* 0,0 external buffer access is disabled
|
|
* 0,1 16k
|
|
* 1,0 32k
|
|
* 1,1 128k
|
|
*/
|
|
|
|
#define EPIC_RXSTAT 0x64 /* RECEIVE STATUS */
|
|
|
|
#define EPIC_RXCNT 0x68
|
|
|
|
#define EPIC_RXTEST 0x6c
|
|
|
|
#define EPIC_TXCON 0x70 /* TRANSMIT CONTROL */
|
|
#define TXCON_SLOTTIME_MASK 0x000000f8 /* slot time */
|
|
#define TXCON_LOOPBACK_D2 0x00000004 /* loopback mode bit 2 */
|
|
#define TXCON_LOOPBACK_D1 0x00000002 /* loopback mode bit 1 */
|
|
#define TXCON_EARLYTX_ENABLE 0x00000001 /* early transmit enable */
|
|
|
|
/*
|
|
* Explanation of LOOPBACK MODE BIT:
|
|
*
|
|
* 0,0 normal operation
|
|
* 0,1 internal loopback (before PHY)
|
|
* 1,0 external loopback (after PHY)
|
|
* 1,1 full duplex - decouples transmit and receive blocks
|
|
*/
|
|
|
|
#define EPIC_TXSTAT 0x74 /* TRANSMIT STATUS */
|
|
|
|
#define EPIC_TDPAR 0x78
|
|
|
|
#define EPIC_TXTEST 0x7c
|
|
|
|
#define EPIC_PRFDAR 0x80
|
|
|
|
#define EPIC_PRCDAR 0x84 /* PCI RECEIVE CURRENT DESCRIPTOR ADDR */
|
|
|
|
#define EPIC_PRHDAR 0x88
|
|
|
|
#define EPIC_PRFLAR 0x8c
|
|
|
|
#define EPIC_PRDLGTH 0x90
|
|
|
|
#define EPIC_PRFCNT 0x94
|
|
|
|
#define EPIC_PRLCAR 0x98
|
|
|
|
#define EPIC_PRLPAR 0x9c
|
|
|
|
#define EPIC_PREFAR 0xa0
|
|
|
|
#define EPIC_PRSTAT 0xa4 /* PCI RECEIVE DMA STATUS */
|
|
|
|
#define EPIC_PRBUF 0xa8
|
|
|
|
#define EPIC_RDNCAR 0xac
|
|
|
|
#define EPIC_PRCPTHR 0xb0 /* PCI RECEIVE COPY THRESHOLD */
|
|
|
|
#define EPIC_ROMDATA 0xb4
|
|
|
|
#define EPIC_PREEMPR 0xbc
|
|
|
|
#define EPIC_PTFDAR 0xc0
|
|
|
|
#define EPIC_PTCDAR 0xc4 /* PCI TRANSMIT CURRENT DESCRIPTOR ADDR */
|
|
|
|
#define EPIC_PTHDAR 0xc8
|
|
|
|
#define EPIC_PTFLAR 0xcc
|
|
|
|
#define EPIC_PTDLGTH 0xd0
|
|
|
|
#define EPIC_PTFCNT 0xd4
|
|
|
|
#define EPIC_PTLCAR 0xd8
|
|
|
|
#define EPIC_ETXTHR 0xdc /* EARLY TRANSMIT THRESHOLD */
|
|
|
|
#define EPIC_PTETXC 0xe0
|
|
|
|
#define EPIC_PTSTAT 0xe4
|
|
|
|
#define EPIC_PTBUF 0xe8
|
|
|
|
#define EPIC_PTFDAR2 0xec
|
|
|
|
#define EPIC_FEVTR 0xf0 /* FEVTR (CardBus) */
|
|
|
|
#define EPIC_FEVTRMSKR 0xf4 /* FEVTRMSKR (CardBus) */
|
|
|
|
#define EPIC_FPRSTSTR 0xf8 /* FPRSTR (CardBus) */
|
|
|
|
#define EPIC_FFRCEVTR 0xfc /* PPRCEVTR (CardBus) */
|
|
|
|
/*
|
|
* EEPROM format:
|
|
*
|
|
* Word Bits Description
|
|
* ---- ---- -----------
|
|
* 0 7-0 LAN Address Byte 0
|
|
* 0 15-8 LAN Address Byte 1
|
|
* 1 7-0 LAN Address Byte 2
|
|
* 1 15-8 LAN Address Byte 3
|
|
* 2 7-0 LAN Address Byte 4
|
|
* 2 15-8 LAN Address Byte 5
|
|
* 3 7-0 Board ID
|
|
* 3 15-8 Checksum
|
|
* 4 5-0 Non-Volatile Control Register Contents
|
|
* 5 7-0 PCI Minimum Grant Desired Setting
|
|
* 5 15-8 PCI Maximum Latency Desired Setting
|
|
* 6 15-0 Subsystem Vendor ID
|
|
* 7 14-0 Subsystem ID
|
|
*/
|
|
|
|
#endif /* _DEV_IC_SMC83C170REG_H_ */
|